LTC2291IUP - Dual 12-Bit 25Msps Low-Power 3V ADC | Analog Devices
N.º da peça: LTC2291IUP ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $20.28 | $20,28 |
| 10 | $18.25 | $182,50 |
| 100 | $16.42 | $1.642,00 |
| 500 | $14.78 | $7.390,00 |
| 1.000 | $13.3 | $13.300,00 |
LTC2291IUP Visão geral
An ADC (Analog-to-Digital Converter) is a mixed-signal integrated circuit that samples a continuous analog input voltage and produces a discrete digital code proportional to that input. Pipeline ADCs in particular use a multi-stage architecture with per-stage flash sub-ADCs and DACs to achieve high sample rates (tens to hundreds of Msps) at moderate resolution (10-14 bits) while keeping power dissipation low - they sit in the converter hierarchy between flash (highest speed, lowest resolution) and sigma-delta (highest resolution, lowest speed). The dual-channel LTC2291 occupies the lower-power end of the 25 Msps class, drawing roughly 1.5W per channel.
Key features of the LTC2291IUP include 71.3 dB SNR and 90 dB SFDR at the Nyquist input frequency, differential input architecture for excellent common-mode noise rejection, selectable input ranges of ±1V or ±0.5V around a common-mode level near 2V, and a flexible LVDS/CMOS output interface. The device operates from a single 2.85V-3.3V analog supply, includes an internal reference, and offers an optional external reference mode for gain accuracy.
Typical applications for the LTC2291 include communications receivers (cellular base-station I/Q digitizers), medical imaging (ultrasound beamforming front-ends), high-end instrumentation (digital oscilloscopes and spectrum analyzers), and defense/multimedia systems. The combination of low power and dual-channel density also makes it a frequent choice for handheld test equipment.
When designing with this part, pay special attention to analog input common-mode biasing and decoupling - the LTC2291 requires AC-coupling or DC bias networks on each input, and ground-bounce on the analog supply can couple directly into the sample clock jitter.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternativas drop-in para LTC2291IUP — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com LTC2291IUP (mesmo formato e footprint) — diferindo em Package, SFDR, SNR, Input Type, RoHS Status.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
LTC2290IUP
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$11.5 / unidade
Ver ficha técnica →LTC2292IUP
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$17.1 / unidade
Ver ficha técnica →LTC2293IUP
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
LTC2289IUP
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
LTC2283IUP
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
LTC2241IUP-12
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$34.5 / unidade
Ver ficha técnica →LTC2291IUP Classificações máximas e características elétricas
| Resolução | 12 bit |
| Number of Channels | 2 (dual, simultaneous sampling) |
| Sample Rate | 25 Msps |
| Architecture | Pipelined |
| Input Type | Differential |
| Analog Supply Voltage | 2.85 V to 3.3 V (single 3 V) |
| Digital Supply Voltage | 2.85 V to 3.3 V |
| Faixa de tensão de entrada | ±1 V or ±0.5 V (selectable) |
| SNR | 71.3 dB at Nyquist input |
| SFDR | 90 dB at Nyquist input |
| Output Interface | CMOS / LVDS (selectable) |
| Encapsulamento | 64-pin QFN (9 mm x 9 mm) |
| Temperatura de operação | -40 C to +85 C (industrial) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
Configuração de pinos do LTC2291IUP
| Pino 1 | DGND — Digital ground |
| Pino 2 | OVCC — Output driver supply |
| Pino 3 | VREF — Reference voltage decoupling |
| Pino 4 | MODE — Mode configuration |
| Pino 5 | SENSE — Input range select |
| Pino 6 | VCM — Common-mode voltage output |
| Pino 7 | NC — Not connected |
| Pino 8 | AIN1+ — Channel 1 differential input positive |
| Pino 9 | AIN1- — Channel 1 differential input negative |
| Pino 10 | AGND — Analog ground |
| Pino 11 | AVCC — Analog supply |
| Pino 12 | NC — Not connected |
| Pino 13 | AIN2+ — Channel 2 differential input positive |
| Pino 14 | AIN2- — Channel 2 differential input negative |
| Pino 15 | AGND — Analog ground |
| Pino 16 | AVCC — Analog supply |
| Pino 17 | CLK+ — Differential clock positive |
| Pino 18 | CLK- — Differential clock negative |
| Pino 19 | NC — Not connected |
| Pino 20 | DGAIN — Digital gain adjustment |
| Pino 21 | D11A — Channel 1 data bit 11 (MSB) |
| Pino 22 | D10A — Channel 1 data bit 10 |
| Pino 23 | D9A — Channel 1 data bit 9 |
| Pino 24 | D8A — Channel 1 data bit 8 |
| Pino 25 | D7A — Channel 1 data bit 7 |
| Pino 26 | D6A — Channel 1 data bit 6 |
| Pino 27 | D5A — Channel 1 data bit 5 |
| Pino 28 | D4A — Channel 1 data bit 4 |
| Pino 29 | D3A — Channel 1 data bit 3 |
| Pino 30 | D2A — Channel 1 data bit 2 |
| Pino 31 | D1A — Channel 1 data bit 1 |
| Pino 32 | D0A — Channel 1 data bit 0 (LSB) |
| Pino 33 | DGND — Digital ground |
| Pino 34 | OVCC — Output driver supply |
| Pino 35 | OF — Output data flag |
| Pino 36 | OGND — Output ground |
| Pino 37 | OVCC — Output driver supply |
| Pino 38 | D0B — Channel 2 data bit 0 (LSB) |
| Pino 39 | D1B — Channel 2 data bit 1 |
| Pino 40 | D2B — Channel 2 data bit 2 |
| Pino 41 | D3B — Channel 2 data bit 3 |
| Pino 42 | D4B — Channel 2 data bit 4 |
| Pino 43 | D5B — Channel 2 data bit 5 |
| Pino 44 | D6B — Channel 2 data bit 6 |
| Pino 45 | D7B — Channel 2 data bit 7 |
| Pino 46 | D8B — Channel 2 data bit 8 |
| Pino 47 | D9B — Channel 2 data bit 9 |
| Pino 48 | D10B — Channel 2 data bit 10 |
| Pino 49 | D11B — Channel 2 data bit 11 (MSB) |
| Pino 50 | NC — Not connected |
| Pino 51 | DGND — Digital ground |
| Pino 52 | ENC — Encode clock out / sync |
| Pino 53 | OF — Output data flag |
| Pino 54 | NC — Not connected |
| Pino 55 | OGND — Output ground |
| Pino 56 | OVCC — Output driver supply |
| Pino 57 | NC — Not connected |
| Pino 58 | NC — Not connected |
| Pino 59 | AGND — Analog ground |
| Pino 60 | AVCC — Analog supply |
| Pino 61 | NC — Not connected |
| Pino 62 | NC — Not connected |
| Pino 63 | NC — Not connected |
| Pino 64 | DGND — Digital ground |
Aplicações típicas
LTC2291IUP é adequado para 6 aplicaçãos: Communications Receiver IF Digitizer, Medical Ultrasound Beamforming, Handheld Digital Oscilloscope Front-End, WCDMA Diversity Receiver, Multichannel Industrial Data Acquisition, Portable Imaging / Video Digitizer.
Communications Receiver IF Digitizer
The LTC2291IUP is well suited for digitizing intermediate-frequency (IF) signals in cellular base-station receivers and software-defined radio (SDR) front-ends. Its dual-channel architecture handles I/Q signal pairs simultaneously, capturing in-phase and quadrature components of a single IF channel without time skew - critical for demodulation accuracy. The 71.3 dB SNR and 90 dB SFDR at the Nyquist frequency let designers place the ADC close to the mixer output, eliminating a downconversion stage. Operated from a single 3 V supply and clocked at 25 Msps, the part draws very low power per channel compared to 14-bit alternatives, easing thermal design in outdoor radio units. Recommended companions: LF353 op-amp, AD8138 differential driver.
Recomendado
Medical Ultrasound Beamforming
In phased-array ultrasound systems, each piezoelectric element requires a dedicated ADC channel running at 20-40 Msps with 12-bit dynamic range - the LTC2291IUP's dual-channel density integrates two such channels on one die, simplifying beamformer PCB layout. The 71.3 dB SNR preserves the 60 dB+ dynamic range required to resolve tissue echoes, while the differential inputs reject common-mode noise from adjacent switching high-voltage transmit pulsers. The exposed thermal pad and 9x9 mm QFN package spread heat evenly, allowing 32+ channel systems to fit on a single beamformer board. Recommended companions: AD8021 op-amp, DAC8564 transmit waveform DAC.
Recomendado
Handheld Digital Oscilloscope Front-End
Portable oscilloscopes need to digitize 20-100 MHz analog bandwidth at sample rates up to 1 Gsps, typically by interleaving multiple 25 Msps ADCs. The LTC2291IUP operates as one element in a 4-way or 8-way time-interleaved front-end, where each dual channel captures alternating sample slots. Its low power dissipation preserves battery runtime, while the LVDS output mode minimizes digital switching noise that would otherwise alias into the analog input path. Front-panel oscilloscope designers value the industrial temperature grade and lead-free QFN footprint. Recommended companions: CDCE906 clock generator, SN65LVDS31 serializers.
Recomendado
WCDMA Diversity Receiver
Diversity receivers in WCDMA/LTE base stations capture two simultaneous antenna signals and combine them via MRC (Maximal Ratio Combining) to improve fade margin. The LTC2291IUP's two identical channels, sampled by a shared clock, are perfectly aligned in time so combining coefficients can be applied without skew correction. The 71.3 dB SNR guarantees the 60+ dB signal-to-noise ratio required for high-order modulation decoding, and the 25 Msps rate comfortably exceeds the 3.84 Mcps chip rate after decimation filtering. Differential inputs reject common-mode pickup in dense antenna arrays. Recommended companions: ADL5501 RSSI detector, FPGA-based baseband processor.
Recomendado
Multichannel Industrial Data Acquisition
Industrial DAQ systems monitor multiple analog sensors (temperature, pressure, vibration, strain gauges) and require simultaneous sampling to preserve phase relationships. The LTC2291IUP's dual-channel sampling makes it economical for channel counts in the 16-64 range; four LTC2291IUPs deliver 8 channels per PCB row with a single shared clock tree. The industrial -40 C to +85 C temperature grade handles factory environments, and the wide-input ±1 V range accommodates industrial transducer outputs directly with minimal signal conditioning. Anti-alias filtering is straightforward at the 12.5 MHz Nyquist band. Recommended companions: AD8230 instrumentation amp, ISO124 isolation amp.
Recomendado
Portable Imaging / Video Digitizer
Industrial cameras and handheld video inspection tools digitize composite or component video at rates around 14-30 Msps per channel - exactly the operating envelope of the LTC2291IUP. The dual channels can digitize Y/C (luminance/chrominance) simultaneously, or two RGB component streams for color-inspection imaging. Low per-channel power keeps the imaging probe thermally cool against the user's hand or plastic enclosure, while the small 9x9 mm QFN footprint preserves compact camera head designs. Differential inputs reject ground-bounce between probe and main unit. Recommended companions: EL4081 sync separator, FPGA image processor.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para LTC2291IUP — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | LTC2290IUP | LTC2292IUP | LTC2293IUP | LTC2289IUP | LTC2283IUP |
|---|---|---|---|---|---|---|
| Package | 64-pin QFN (9x9) | 64-pin QFN (9x9) - same | 64-pin QFN (9x9) - same | 64-pin QFN (9x9) - same | 64-pin QFN (9x9) - same | 64-pin QFN (9x9) - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 10 bit | 12 bit |
| Sample Rate | 25 Msps | 10 Msps | 40 Msps | 65 Msps | 25 Msps | 25 Msps |
| Number of Channels | 2 (dual) | 2 (dual) | 2 (dual) | 2 (dual) | 2 (dual) | 2 (dual) |
| Input Type | Differential | Differential | Differential | Differential | Differential | Differential |
| Output Interface | CMOS / LVDS | CMOS / LVDS | CMOS / LVDS | CMOS / LVDS | CMOS / LVDS | CMOS / LVDS |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| RoHS Status | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
Principais diferenciais
- Lowest sample rate in LTC2293 family gives lowest power (vs LTC2292IUP)
- Higher resolution than 10-bit dual ADCs (vs LTC2289IUP)
- Same footprint as higher-speed LTC2293 (vs LTC2293IUP)
Notas de projeto
Place the analog input traces symmetrically and as close to the ADC inputs as possible - the LTC2291IUP uses differential inputs and any length mismatch between AIN+ and AIN- paths will unbalance common-mode rejection. Shield the analog input traces with a ground plane on the next layer, and route the 25 MHz clock traces perpendicular to inputs to minimize crosstalk. The exposed thermal pad must be soldered to a continuous ground plane with at least 9 thermal vias for heat spreading.
Decouple AVCC and OVCC separately with 0.1 uF ceramic capacitors placed within 2 mm of each supply pin, plus a 10 uF bulk capacitor near the part. The analog and digital grounds should be joined at a single point under the IC exposed pad, not split across the entire PCB - a split ground at this ADC's frequency would inject switching noise into the analog front-end and degrade SNR by several dB.
Estimated: To preserve the full 71.3 dB SNR, the external clock source should have aperture jitter below 0.3 ps-rms. A typical crystal oscillator like the MXT555 at 25 MHz provides ~1 ps jitter which would limit SNR to around 68 dB - upgrade to a SAW oscillator or clock conditioner (e.g. AD9513 or LMX2531) when SNR-critical.
Do not operate the LTC2291IUP with DC-coupled single-ended inputs without biasing the common-mode level - the inputs are fully differential and the input pair will saturate without bias. Use AC coupling or include a resistive divider on each AIN+ and AIN- pin to set the common-mode voltage near the VCM output. Also ensure the SENSE pin is connected to AVDD or GND per datasheet - leave it floating causes undefined input range.
Informações de conformidade
RoHS-compliant and lead-free per distributor listings. Halogen-free and conflict-mineral status not explicitly stated in the verified data; refer to the manufacturer's materials declaration for confirmation.
