M29W800FT70ZA3SF - 8Mbit NOR Flash 70ns TFBGA48 | Micron
N.º da peça: M29W800FT70ZA3SF ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $3.2 | $3,20 |
| 10 | $2.9 | $29,00 |
| 100 | $2.55 | $255,00 |
| 500 | $2.3 | $1.150,00 |
| 1.000 | $2.05 | $2.050,00 |
M29W800FT70ZA3SF Visão geral
Parallel NOR Flash is a non-volatile memory technology that connects directly to a microprocessor's address and data buses, allowing code to be executed in place (XIP, execute-in-place). Within the memory hierarchy, NOR Flash sits alongside SRAM and DRAM as directly addressable memory, distinguished from NAND Flash and serial SPI Flash by its random-access capability and high read reliability. It remains the standard choice for boot code storage in embedded systems.
Key features of this device include the 70 ns access time suitable for zero-wait-state execution on many embedded processors, a 2.7 V to 3.6 V single supply compatible with 3.3 V logic, and 8 Mbit of density organized for byte or word access. The uniform block architecture with boot-block arrangement supports flexible code and data partitioning.
Architecturally, the M29W800FT family uses floating-gate NOR cell technology with block-based erase and program operations managed through a command interface. Status polling and toggle-bit schemes allow the host processor to monitor program and erase completion without interrupts. The extended -40 C to +125 C temperature rating targets harsh industrial and automotive-adjacent environments.
Typical applications include boot-code storage for embedded microcontrollers and microprocessors, industrial automation controllers, networking equipment firmware, set-top boxes, and telecom line cards where in-place code execution is required.
Designers should ensure the 3.3 V supply rail is decoupled locally and observe the block-erase and program timing requirements of the command interface when writing drivers.
This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, as of 2026-09-02.
Alternativas drop-in para M29W800FT70ZA3SF — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com M29W800FT70ZA3SF (mesmo formato e footprint) — diferindo em Package, Density, Interface, Memory Type, Organization.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
M29W800FB70ZA3SF
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.45 / unidade
Ver ficha técnica →M29W800FT70ZA6SF
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
M29W800FT70ZS3F
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
M29W800FT70ZA3SF Classificações máximas e características elétricas
| Tipo de memória | NOR Flash |
| Density | 8 Mbit |
| Interface | Parallel |
| Access Time | 70 ns |
| Tensão de alimentação | 2.7 V to 3.6 V |
| Temperatura de operação | -40C to +125C |
| Encapsulamento | 48-TFBGA (6 x 8 mm) |
| Tipo de montagem | Surface Mount |
| Boot Block Configuration | Top boot block (FT) |
| Package Body Size | 6 x 8 mm |
| Ball Pitch | 0.80 mm |
Guia de Configuração de Pinos do M29W800FT70ZA3SF 6 x 8 mm
Configuração de pinos para M29W800FT70ZA3SF (pacote 6 x 8 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para M29W800FT70ZA3SF.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
M29W800FT70ZA3SF é adequado para 6 aplicaçãos: Embedded Boot Code Storage, Industrial Automation Controllers, Networking and Telecom Equipment, Set-Top Boxes and Consumer Electronics, Automotive-Adjacent and Transportation Electronics, Test and Measurement Instrumentation.
Embedded Boot Code Storage
The M29W800FT70ZA3SF stores boot and application firmware for microcontroller and microprocessor systems that read code in place over a parallel bus. Its 70 ns access time supports zero-wait-state fetches on many 3.3 V embedded processors, and the 8 Mbit density accommodates bootloader plus application images in a single non-volatile device. The top boot block arrangement places reset-vector code at the top of the array, and the 2.7 V to 3.6 V supply allows direct connection to a standard 3.3 V rail without level shifting.
Recomendado
Industrial Automation Controllers
Industrial PLC and motor-control controllers require firmware storage that survives -40 C to +125 C ambient extremes inside sealed cabinets. The M29W800FT70ZA3SF meets this extended temperature rating while providing reliable parallel random access for in-place code execution after power-up. Block-based erase allows field firmware updates of individual code segments without erasing parameter storage blocks, and the 3 V supply integrates directly with industrial 3.3 V logic domains, reducing component count versus 5 V-only legacy Flash solutions.
Recomendado
Networking and Telecom Equipment
Routers, switches, and telecom line cards traditionally use parallel NOR Flash for bootloader and firmware images because NOR offers the read reliability and random access that code execution demands. The M29W800FT70ZA3SF's 70 ns access time keeps CPU fetch latency low, while the 48-ball TFBGA (6 x 8 mm) package saves board area versus the TSOP48 alternative on dense line cards. The 8 Mbit capacity suits compact boot images, with the parallel interface remaining compatible with mature network processor reference designs.
Recomendado
Set-Top Boxes and Consumer Electronics
Set-top box and consumer AV platforms use parallel NOR Flash for the secure boot stage that verifies and loads the main application image. The M29W800FT70ZA3SF provides a dependable 3.3 V parallel boot device whose -40 C to +125 C rating covers poorly ventilated consumer enclosures. Its top boot block lets designers isolate the immutable boot loader in protected blocks above field-updatable application regions, and the small 6 x 8 mm TFBGA footprint fits tightly packed mainboard layouts typical of cost-driven consumer hardware.
Recomendado
Automotive-Adjacent and Transportation Electronics
Telematics units, gateway modules, and instrumentation clustered near automotive cabins experience wide temperature swings; the M29W800FT70ZA3SF's -40 C to +125 C rating covers these environments. Parallel NOR remains the default boot medium where code must execute immediately from reset without a serial-boot intermediary. The 2.7 V to 3.6 V operating window tolerates supply sag during crank or load-dump-adjacent transients better than tighter-spec devices, and the 70 ns access supports the moderate fetch rates of typical transportation MCUs and gateway processors.
Recomendado
Test and Measurement Instrumentation
Bench instruments, data loggers, and portable testers store calibration constants, FPGA configuration images, and instrument firmware in NOR Flash. The M29W800FT70ZA3SF's block architecture separates protected calibration data from re-writable firmware, and its parallel interface supports direct CPU boot in instruments built around mature 16-bit bus architectures. The 70 ns access time keeps boot and menu-response latency low, while the TFBGA package withstands the vibration and thermal cycling typical of portable field equipment better than fine-pitch leaded packages.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para M29W800FT70ZA3SF — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | M29W800FB70ZA3SF | M29W800FT70ZA6SF | M29W800FT70ZS3F |
|---|---|---|---|---|
| Package | 48-TFBGA (6 x 8 mm) | 48-TFBGA (6 x 8 mm) - same | 48-TFBGA (6 x 8 mm) - same | 48-TFBGA (6 x 8 mm) - same |
| Brand | Micron Technology | Micron Technology | Micron Technology | Micron Technology |
| Density | 8 Mbit | 8 Mbit | 8 Mbit | 8 Mbit |
| Access Time | 70 ns | 70 ns | 70 ns | 70 ns |
| Supply Voltage | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Boot Block Position | Top boot block (FT) | Bottom boot block (FB) | Top boot block (FT) | Top boot block (FT) |
| Drop-in Compatibility | Reference (48-TFBGA, parallel 8 Mbit) | Yes - verify boot block mapping | Yes - verify grade suffix | Yes - verify packaging suffix |
Principais diferenciais
- Top boot block placement for top-of-memory reset vectors (vs M29W800FB70ZA3SF)
- Extended -40 C to +125 C temperature rating (vs Commercial-grade 0 C to 70 C NOR Flash)
- 70 ns asynchronous parallel access (vs MT25QL128 Quad SPI Flash)
Notas de projeto
Supply the M29W800FT70ZA3SF from a regulated 3.3 V rail within the 2.7 V to 3.6 V window. Decouple VCC with at least a 0.1 uF ceramic capacitor placed within a few millimeters of the TFBGA power balls, plus one bulk 4.7 uF to 10 uF capacitor per device. Program and erase operations draw current pulses on VCC, so adequate local decoupling prevents brown-out of neighboring logic during block erase.
The 48-TFBGA (6 x 8 mm, 0.80 mm pitch) requires a standard BGA land pattern with via-in-pad or dog-bone fanout on address and data lines. Keep the parallel address/data bus traces length-matched within reason for a 70 ns asynchronous interface - excessive skew is generally tolerable below 50 MHz bus rates, but stubs should be minimized. Confirm the ball map against the Micron M29W800 family datasheet before routing, since the FB and FT variants differ in code placement, not ballout.
Do not confuse FT (top boot block) with FB (bottom boot block) when ordering - code linked against the wrong block map will fail to boot even though the device is otherwise identical. Also verify suffix codes: temperature grade, package, and packaging (tray vs TR reel) are encoded in the ordering part number. When replacing a legacy ST M29W800 part, confirm the -7 speed grade (70 ns) matches the timing assumptions in your bus controller configuration.
Informações de conformidade
Compliance status not stated in the provided web data; consult the Micron product page and material declarations for the M29W800FT70ZA3SF.
