Texas Instruments

MAX3221EIPW - 250kbps Single RS-232 Transceiver | TI

N.º da peça: MAX3221EIPW ✓ Ativo
3V to 5.5V Vdss 16-pin TSSOP Package
MOQ: 1 |

MAX3221EIPW Visão geral

The Texas Instruments MAX3221EIPW is a single-channel RS-232 line driver and receiver rated for 250kbps operation, with a 3V to 5.5V supply range and ±15kV IEC ESD protection on the RS-232 pins. The device is packaged in a 16-pin TSSOP surface-mount package.

An RS-232 transceiver is an interface IC that converts logic-level UART signals into differential, bipolar RS-232 levels and converts received RS-232 signals back into logic-compatible levels. The MAX3221E belongs to the RS-232 transceiver family within interface ICs and power-management-adjacent signal-conditioning devices. It provides the electrical interface between an asynchronous communication controller and a serial-port connector.

The MAX3221E uses a single power supply and an on-chip charge pump with four small external capacitors. Its single driver and single receiver arrangement suits point-to-point serial links, while the enhanced ESD protection helps improve robustness at connector-facing pins. Operation across a 3V to 5.5V supply range supports both 3.3V and 5V system rails.

The device meets TIA/EIA-232-F requirements and provides IEC 61000-4-2 ESD protection. These qualifications are important because RS-232 implementations frequently connect through external connectors where cables and ESD events can introduce transient voltage. The MAX3221EIPW is therefore suitable for industrial control links, service interfaces, and embedded equipment requiring a compact single-channel RS-232 solution.

Typical uses include configuring a UART port on an embedded controller, upgrading an industrial peripheral that still uses an RS-232 connector, and creating a service or debug link between a host computer and field equipment. Because the interface is single-channel, applications needing multiple simultaneous RS-232 ports generally require additional transceiver channels or separate interface devices.

Place the four charge-pump capacitors close to their assigned pins, and route the RS-232 driver and receiver traces as a protected cable-side interface. Keep logic-side UART traces away from connector and charge-pump nodes, provide a stable ground return, and verify the external protection network against the system’s ESD requirements.

This page combines the manufacturer’s electrical specifications, package details, qualified substitute analysis, and practical PCB guidance. It also highlights where MAX3221E family alternatives share the same TSSOP-16 footprint and where their shutdown, enable, or ESD characteristics require verification before replacement.

Alternativas drop-in para MAX3221EIPW — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MAX3221EIPW (mesmo formato e footprint) — diferindo em Product Type, Number of Drivers, Number of Receivers, Supply Voltage Range, Maximum Data Rate.

Texas Instruments
Product Type: Single-channel RS-232 line driver/receiver
Number of Drivers: 1
Number of Receivers: 1
Comparar com MAX3221EIPW →
Texas Instruments
Product Type: RS-232 line driver and receiver transceiver
Number of Drivers: 1
Number of Receivers: 1
Comparar com MAX3221EIPW →
Texas Instruments
Product Type: Single-channel RS-232 line driver/receiver transceiver
Supply Voltage Range: 3 V to 5.5 V
Maximum Data Rate: 250 kbps
Comparar com MAX3221EIPW →

MAX3221CPWR

✅ Drop-In
📦 TSSOP-16
Both use one driver and one receiver with ±15kV ESD protection; dedicated enable and automatic-shutdown behavior require pin-level verification.

📋 Alternativa de referência (fora do catálogo)

MAX3221ECPWR

✅ Drop-In
Texas Instruments
📦 TSSOP-16
RS-232 line driver and receiver transceiver · 3 V to 5.5 V · 250 kbps · 1 · 1 · plus or minus 15 kV · TIA/EIA-232-F · Dual charge-pump circuit

Consulte o preço

Ver ficha técnica →

MAX3221IPWR

✅ Drop-In
Texas Instruments
📦 TSSOP-16
Single-channel RS-232 line driver/receiver · 1 driver · 1 receiver with dedicated enable pin · 3 V to 5.5 V · 250 kbps · ±15 kV on serial-port connection pins · TIA/EIA-232-F · Dual charge-pump circuit

Consulte o preço

Ver ficha técnica →

MAX3221EIPW Especificações

Product Type Single-channel RS-232 line driver and receiver
Supply Voltage Range 3V to 5.5V
Maximum Data Rate 250kbps
Number of Drivers 1 driver
Number of Receivers 1 receiver
RS-232 ESD Protection ±15kV
ESD Standard IEC 61000-4-2
RS-232 Standard Compliance TIA/EIA-232-F
Charge-Pump Capacitors Required 4 external capacitors
Encapsulamento 16-pin TSSOP
Tipo de montagem Surface mount
Tipo de interface Full RS-232 transceiver
Driver and Receiver Count 1/1 transceiver

Guia de Configuração de Pinos do MAX3221EIPW 16-pin tssop

Configuração de pinos para MAX3221EIPW (pacote 16-pin tssop). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 16-pin tssop para MAX3221EIPW

Nenhum dado detalhado de pinagem disponível para MAX3221EIPW.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MAX3221EIPW é adequado para 6 aplicaçãos: Industrial Control Console, Embedded UART-to-RS-232 Bridge, Point-to-Point Serial Link, Instrument Service Interface, Security and Access Controller, Portable Diagnostic Connector.

🏭

Industrial Control Console

The MAX3221EIPW is suitable for connecting an industrial controller or service terminal that still uses an RS-232 port. Its 3V-to-5.5V operating range permits use with 3.3V or 5V embedded systems, while the 250kbps data rate supports administrative commands, configuration transfers, and diagnostic traffic. The single driver and receiver provide the required levels between a UART controller and a DB9 or terminal connector. Its ±15kV IEC 61000-4-2 protection is particularly relevant where the cable is exposed to human contact. Designers should still include appropriate common-mode and surge protection for long industrial runs.

🔧

Embedded UART-to-RS-232 Bridge

The MAX3221EIPW bridges the logic-level UART pins of an embedded controller to a full RS-232 port. Its single 3V-to-5.5V supply simplifies integration with common embedded processors, while 250kbps operation is appropriate for configuration commands, firmware-console traffic, and short control exchanges. The internal charge pump needs only four external capacitors, reducing board area compared with a discrete driver-receiver implementation. A key layout consideration is to separate the cable-side RS-232 traces from sensitive UART and processor signals. Firmware should also account for RS-232 level inversion and ensure that the selected UART supports the required baud rate.

🌐

Point-to-Point Serial Link

The MAX3221EIPW provides one transmitter and one receiver for point-to-point communication between two asynchronous systems. At up to 250kbps, it is suitable for short control and monitoring links where a modern multi-protocol transceiver would add unnecessary cost or complexity. The single-supply architecture supports both 3.3V and 5V systems, and the charge-pump arrangement allows the interface to operate without a separate bipolar supply. When laying out the link, use a continuous signal and ground return, keep connector protection close to the entry point, and verify that the far-end UART receiver recognizes the bipolar RS-232 signaling correctly.

🖥️

Instrument Service Interface

The MAX3221EIPW can provide a service port for laboratory, test, and measurement equipment that retains an RS-232 configuration interface. The 250kbps capability is more than adequate for command exchange, calibration files, and diagnostic logs, while the single TSSOP-16 package supports compact front-panel or board-level implementations. The ±15kV IEC ESD rating on the RS-232 pins adds protection at a connector that operators may contact frequently. For portable instruments, ensure the chassis and logic grounds follow the required RS-232 topology, and place any additional surge protection outside the logic-side routing area.

🎥

Security and Access Controller

The MAX3221EIPW can add an RS-232 maintenance channel to access-control or security equipment without consuming a dedicated multichannel interface IC. A 250kbps RS-232 link is suitable for configuration exchange, event-log retrieval, and controlled commissioning commands when the system already supports this legacy physical interface. The 3V-to-5.5V range allows operation alongside common embedded security controllers, and the ±15kV IEC ESD protection supports connector reliability. Security designs should still authenticate commands at a higher protocol layer, isolate maintenance access, and avoid treating physical-layer protection as a substitute for secure device authentication.

📱

Portable Diagnostic Connector

The MAX3221EIPW is appropriate for portable diagnostic equipment that needs a compact RS-232 service connector. Its 250kbps single-channel interface supports log transfers and configuration commands, and the 3V-to-5.5V supply range fits systems operating from either 3.3V or 5V rails. Because a detachable cable can expose the port to electrostatic discharge, the documented ±15kV IEC 61000-4-2 protection is an important selection criterion. Keep the four charge-pump capacitors close to the device, maintain separation between connector-side traces and internal logic, and validate the complete cable and enclosure configuration at the system level.

What are the key specifications of MAX3221EIPW that engineers should know?
The MAX3221EIPW is a 250kbps single-channel RS-232 transceiver operating from a 3V to 5.5V supply and providing ±15kV IEC ESD protection. According to the Texas Instruments MAX3221E product page, it contains one driver and one receiver, operates from a single supply, and uses four external charge-pump capacitors. The device meets TIA/EIA-232-F requirements and is offered in a 16-pin TSSOP package.
What is the operating voltage of MAX3221EIPW?
The MAX3221EIPW operates from a 3V to 5.5V supply. According to the Texas Instruments MAX3221E product page, this range supports both 3.3V and 5V systems. The part requires a single supply for its line driver and receiver circuitry, while its internal charge pump generates the bipolar voltage levels required by the RS-232 interface. Confirm capacitor voltage ratings and the system’s ground reference before layout release.
What is the maximum data rate of MAX3221EIPW?
The MAX3221EIPW supports data rates up to 250kbps. According to the Texas Instruments MAX3221E product page, the device is intended for asynchronous RS-232 communication between a serial controller and an external connector. The stated 250kbps capability should be treated as the maximum interface rate, while practical system throughput can also be limited by UART baud tolerance, cable length, loading, and the performance of the connected host.
How much ESD protection does MAX3221EIPW provide?
The MAX3221EIPW provides ±15kV ESD protection on the RS-232 pins according to the Texas Instruments MAX3221E product page. The protection is specified under IEC 61000-4-2. This rating strengthens the connector-facing interface against electrostatic discharge, but it does not remove the need for correct grounding, cable design, and system-level surge protection. Additional protection may still be appropriate for severe industrial environments.
Where can I download the MAX3221EIPW datasheet PDF?
The official MAX3221E datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/MAX3221E. The manufacturer document describes the 3V to 5.5V supply range, 250kbps operation, ±15kV IEC ESD protection, charge-pump capacitor arrangement, electrical characteristics, and package drawings. Use the manufacturer PDF for final pin assignments, recommended operating conditions, and application details when releasing a production design.
Where can I find the MAX3221EIPW pinout and package drawing?
The MAX3221EIPW pin assignment and package drawing are in the Texas Instruments MAX3221E manufacturer datasheet at https://www.ti.com/lit/gpn/MAX3221E. The exact ordering code is a 16-pin TSSOP device. Use the pin-description table and package drawing in that PDF when assigning PCB nets. The complete pin table is not reproduced on this page because an exact manufacturer pin list was not available in the cited product content.
What can replace MAX3221EIPW?
MAX3221CPWR is a potential same-family drop-in candidate because it is identified as a 16-pin MAX3221 RS-232 transceiver with ±15kV ESD protection and an enable pin. MAX3221ECPWR is another candidate sharing the MAX3221E series and 16-pin TSSOP format. Before replacement, verify enable behavior, automatic shutdown, propagation delay, receiver fail-safe response, operating temperature, and lifecycle status against the original design requirements.
Is MAX3221EIPW the same as MAX3221CPWR?
MAX3221EIPW and MAX3221CPWR are closely related MAX3221-family devices, but they are not necessarily identical in every operating detail. MAX3221CPWR is described as a 16-pin MAX3221 transceiver with a dedicated enable pin and ±15kV ESD protection. MAX3221EIPW is the enhanced 3V-to-5.5V single-channel device in TSSOP-16. Confirm shutdown, enable, timing, and temperature limits before treating the C variant as an exact substitution.
When should I choose MAX3221EIPW over MAX3221CPWR?
Choose MAX3221EIPW when the design specifically requires the MAX3221E enhanced family behavior and its documented 250kbps, 3V-to-5.5V operation and ±15kV IEC ESD rating. Choose MAX3221CPWR when its dedicated enable pin and electrical characteristics better match the board’s shutdown architecture. Both appear in TSSOP-16 families, but the decision should be based on verified pin behavior and application requirements rather than package similarity alone.
Is MAX3221EIPW suitable for industrial control equipment?
The MAX3221EIPW is suitable for industrial control equipment requiring a single RS-232 port, provided the interface is protected against the expected industrial electrical environment. Its 3V-to-5.5V supply range supports embedded 3.3V systems, while the ±15kV IEC 61000-4-2 rating supports ESD protection on RS-232 pins. For long cables or severe transients, add coordinated surge and common-mode protection rather than relying on the transceiver alone.
Where to buy MAX3221EIPW online?
Use the “Request a Quote” form on this page to request availability, lead time, and an order quotation for the exact MAX3221EIPW ordering code. The listing identifies the part as a Texas Instruments 1/1 full-RS-232 transceiver in a 16-pin TSSOP package. Include your required quantity, packaging preference, target date, and screening requirements so the request can be matched to the correct manufacturer part and delivery conditions.
What is the price of MAX3221EIPW?
The current commercial price for MAX3221EIPW is obtained through the “Request a Quote” form on this page. The structured offer refreshes independently to keep quotations aligned with availability and purchasing volume. The request should specify quantity, acceptable packaging, target geography, and required delivery date. A precise unit-price comparison is only meaningful when the quantity break, currency, and shipment terms are identical.
What is the lead time for MAX3221EIPW?
The current lead time for MAX3221EIPW should be confirmed through the “Request a Quote” form on this page. Lead time can change with order quantity, factory inventory, component availability, and requested delivery terms. For production planning, include the required ship date, acceptable packaging, and forecast quantity in the request. Do not base a schedule solely on a catalog stock indication that may change after inquiry.
Is MAX3221EIPW in stock?
Current stock status for the exact MAX3221EIPW ordering code is confirmed through the “Request a Quote” form on this page. Inventory may differ by region, quantity, and packaging method, so the receiving confirmation should specify the complete manufacturer part number and requested shipment quantity. Include any date-sensitive production requirement when submitting the request.
What is the best Analog Devices equivalent for MAX3221EIPW?
The MAX3232EEAE+ family is a potential functional comparison for a MAX3221EIPW design, but it should not be treated as an automatic drop-in replacement. The available comparison identifies it as a related RS-232 interface, while the exact package, enable logic, shutdown behavior, ESD rating, and pin mapping require separate confirmation. If a second source is mandatory, request the manufacturer cross-reference and verify all 16 package pins before approving the substitution.

Dados de referência de engenharia para MAX3221EIPW — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MAX3221EIPW when the board needs one full RS-232 channel, operates from a 3.3V or 5V rail, and benefits from the documented MAX3221E family features and ±15kV IEC ESD protection. MAX3221CPWR is a practical same-package candidate when its dedicated enable pin matches the board’s shutdown architecture, but verify timing and automatic-shutdown behavior before approval. MAX3221ECPWR is appropriate when the exact MAX3221E variant is required and its control behavior is confirmed. MAX3221IPWR can suit designs already standardized on the original MAX3221 family. For new multi-port or isolated communication designs, a multichannel or isolated interface may offer a better system fit. Do not approve any substitute solely because it uses TSSOP-16; compare pin functions, thresholds, timing, temperature limits, and ESD behavior.

Comparação com alternativas

Parâmetro Este produto MAX3221CPWR MAX3221ECPWR MAX3221IPWR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package TSSOP-16 TSSOP-16 TSSOP-16 TSSOP-16
Product Type Single-channel RS-232 line driver and receiver Single-channel MAX3221 RS-232 transceiver Single-channel MAX3221E RS-232 transceiver Single-channel MAX3221 RS-232 transceiver
Number of Drivers 1 driver 1 driver 1 driver 1 driver
Number of Receivers 1 receiver 1 receiver 1 receiver 1 receiver
Supply Voltage Range 3V to 5.5V 3V to 5.5V 3V to 5.5V 3V to 5.5V
Maximum Data Rate 250kbps 250kbps 250kbps 250kbps
RS-232 Pin ESD Protection ±15kV ±15kV ±15kV ±15kV

Principais diferenciais

  • Single-channel RS-232 interface in a compact TSSOP-16 package (vs MAX3232EEAE+)
  • Documented enhanced IEC ESD protection (vs MAX3221CPWR)
  • Single-supply operation across 3.3V and 5V rails (vs MAX3221IPWR)

Notas de projeto

Place the four charge-pump capacitors directly beside their assigned pins and use the shortest practical ground return from each capacitor. Keep the connector-side driver and receiver nets away from UART, clock, and sensitive analog traces. Route the RS-232 signal and ground as a matched pair to reduce emissions and susceptibility to common-mode noise. Where the interface crosses a board boundary, place any supplementary protection network near the connector rather than near the transceiver.

Do not treat the RS-232 transceiver as a galvanic-isolated interface. Verify that the logic ground and cable-side ground follow the system’s intended topology, because an unintended ground connection can defeat isolation elsewhere in the design. Also confirm the required supply rail, charge-pump capacitor values, enable state, and connector gender before PCB release. A package match alone is not sufficient to approve MAX3221CPWR, MAX3221ECPWR, or MAX3221IPWR as a replacement.

RS-232 driver edges can radiate into nearby circuitry even when the data rate is modest. Maintain maximum practical separation between the driver output and receiver input from the transceiver to the connector, avoid routing the cable-side signal beneath sensitive circuitry, and provide a continuous ground reference beneath or adjacent to the route where practical. For long or unshielded cables, evaluate the completed system with the required EMC test setup rather than relying only on the ±15kV ESD rating.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The MAX3221E product content confirms IEC 61000-4-2 ESD protection and TIA/EIA-232-F interface compliance. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not explicitly established for the exact ordering code and remain unknown.

Dados verificados em: 2026-11-13 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

max3221eipw datasheet MAX3221EIPW datasheet pdf MAX3221EIPW pinout MAX3221EIPW equivalent MAX3221EIPW replacement MAX3221EIPW cross reference Texas Instruments MAX3221EIPW MAX3221EIPW price MAX3221EIPW stock MAX3221EIPW TSSOP-16 pinout MAX3221EIPW application circuit MAX3221EIPW vs MAX3221CPWR MAX3221E 250kbps RS-232 transceiver MAX3221E 3V 5.5V IEC ESD

Componentes & termos relacionados

Texas Instruments MAX3221EIPW MAX3221E MAX3221CPWR MAX3221ECPWR MAX3221IPWR MAX3221CDBR MAX3232EEAE+ RS-232 transceiver line driver line receiver interface IC asynchronous serial communication TIA/EIA-232-F IEC 61000-4-2 charge pump 250kbps 3V to 5.5V supply ±15kV ESD protection TSSOP-16 TSSOP package family surface-mount technology UART industrial control test and measurement
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ