Texas Instruments

MAX3243EIDW - 3/5 RS-232 Transceiver | Texas Instruments

N.º da peça: MAX3243EIDW ✓ Ativo
3 V to 5.5 V Vdss 28-SOIC, 0.295 inch width, 7.50 mm Package
MOQ: 1 |

MAX3243EIDW Visão geral

The Texas Instruments MAX3243EIDW is a 3/5 multichannel RS-232 line driver and receiver operating from a 3 V to 5.5 V supply, with data rates up to 500 kbps. It is housed in a 28-pin SOIC package and provides enhanced electrostatic-discharge protection of ±15 kV for IEC air-gap discharge and ±8 kV for contact discharge on serial-port connection pins. The device is intended for industrial, instrumentation, data-acquisition, and equipment-control interfaces requiring RS-232 compatibility with improved transient immunity.

An RS-232 transceiver combines line drivers and line receivers in one interface circuit. The driver converts logic-level inputs into RS-232 bipolar levels, while the receiver converts differential, bipolar serial signals back into logic-compatible outputs. This MAX3243E device is positioned as a 3/5 transceiver for multichannel designs, allowing several RS-232 ports to share one package while reducing the number of external interface components.

Key characteristics include a 500 kbps maximum signaling rate, operation across a 3 V to 5.5 V supply range, and industrial-temperature identification in the MAX3243EIDW ordering code. The E suffix denotes the enhanced ESD-protection family, making the device preferable to standard MAX3243 variants when exposed cables, connector contacts, or industrial wiring can introduce electrostatic discharge transients. The 28-pin SOIC footprint supports conventional through-hole or surface-mount assembly and is convenient for designs migrating from discrete RS-232 driver and receiver pairs.

The MAX3243E is designed to meet the electrical requirements of the RS-232 standard while offering low-power operation from a single supply. The wide supply range permits use in systems with 3.3 V or 5 V logic rails, provided the interface is configured for the selected operating voltage. The transceiver architecture also allows designers to place receive and transmit functions close to a connector, reducing susceptibility to noise on long interconnects.

Typical applications include industrial control consoles, serial test equipment, barcode and scanning systems, laboratory instrumentation, data-logging equipment, and RS-232 ports in embedded systems. The device is particularly useful where a cable-mounted connector can be exposed to electrostatic discharge during maintenance, plugging, or operation in electrically noisy environments.

When laying out a board using the MAX3243EIDW, route each RS-232 driver and receiver connection directly to its connector and keep sensitive logic traces away from those protected connector pins. Confirm supply decoupling, grounding, and connector-return continuity in the manufacturer datasheet reference circuit. For systems requiring a different channel count or package, use the pin-configuration table and ordering information from the MAX3243E datasheet before selecting a substitute.

Alternativas drop-in para MAX3243EIDW — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com MAX3243EIDW (mesmo formato e footprint) — diferindo em Package, Maximum Data Rate, ESD Protection, Product Type, Number of Receivers.

Texas Instruments
Package: 28-pin SSOP
Maximum Data Rate: 500kbps
ESD Protection: ±15kV IEC
Comparar com MAX3243EIDW →
Texas Instruments
Package: 28-pin SOIC (DW), gull wing, surface mount
Maximum Data Rate: 250 kbps
ESD Protection: +/-15 kV (HBM) on serial pins
Comparar com MAX3243EIDW →
Texas Instruments
Package: 28-pin DW SOIC
Maximum Data Rate: 250 kbps
ESD Protection: ±15 kV using the Human Body Model
Comparar com MAX3243EIDW →

MAX3243IDW

✅ Drop-In
Texas Instruments
📦 28-SOIC
Multichannel RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbps · 3 channels · 5 channels · ±15 kV using the Human Body Model · 1 µA · RS-232 and CMOS

Consulte o preço

Ver ficha técnica →

MAX3243EIDB

✅ Drop-In
Texas Instruments
📦 28-SOIC
3 V to 5.5 V · 500kbps · 3 · 5 · ±15kV IEC · RS-232 · 28-pin SSOP · DB

Consulte o preço

Ver ficha técnica →

MAX3243CWI-T

✅ Drop-In
📦 28-SOIC
Same 28-SOIC MAX3243 transceiver family, but the CWI-T version does not carry the E-version enhanced ±15 kV IEC air-gap ESD rating

📋 Alternativa de referência (fora do catálogo)

MAX3244EEWI+

✅ Drop-In
📦 28-SOIC
Competing 28-SOIC multichannel RS-232 transceiver family; channel count, enable logic, ESD ratings, and supply-current limits require comparison with the target datasheet

📋 Alternativa de referência (fora do catálogo)

MAX3243EIDW Especificações

Product Type RS-232 line driver/receiver transceiver
Channel Configuration 3/5 multichannel transceiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 500 kbps
ESD Protection, IEC Air Gap ±15 kV
ESD Protection, IEC Contact ±8 kV
Number of Receivers 5
Duplex Operation Full duplex
Interface Standard RS-232
Encapsulamento 28-SOIC, 0.295 inch width, 7.50 mm
Package Type Gull-wing surface-mount SOIC
Terminals 28
Temperature Grade Industrial
Tipo de montagem Surface mount
Status RoHS Unknown
REACH Status Unknown
Lead-Free Status Unknown
Halogen-Free Status Unknown
Automotive AEC-Q100 Qualification Not applicable

Guia de Configuração de Pinos do MAX3243EIDW gull-wing surface-mount soic

Configuração de pinos para MAX3243EIDW (pacote gull-wing surface-mount soic). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote gull-wing surface-mount soic para MAX3243EIDW

Nenhum dado detalhado de pinagem disponível para MAX3243EIDW.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

MAX3243EIDW é adequado para 6 aplicaçãos: Industrial Serial Control Console, RS-232 Data-Acquisition Equipment, Barcode and Scanning Systems, Embedded Service and Diagnostic Ports, Test and Measurement Equipment, RS-232 Communication in Audio and Control Equipment.

🏭

Industrial Serial Control Console

The MAX3243EIDW fits an industrial console that combines several RS-232 links with a 3.3 V or 5 V controller. Its 3 V to 5.5 V operating range supports both supply arrangements, while the 500 kbps signaling rate provides headroom for command traffic and diagnostic data. The ±15 kV IEC air-gap and ±8 kV IEC contact ratings add useful transient tolerance on cables connected to service equipment. Place the transceiver near the serial connectors so protected pins connect through short, direct routes. Compared with a discrete driver/receiver approach, the multichannel package reduces footprint and assembly effort while centralizing ESD protection.

📟

RS-232 Data-Acquisition Equipment

Laboratory and field data-acquisition equipment can use the MAX3243EIDW to connect several instruments or legacy peripherals to a control computer. The five-receiver arrangement supports multiple input channels, while the driver outputs handle outbound control commands at rates up to 500 kbps. Operation from 3 V to 5.5 V allows the interface to sit between a modern embedded processor and 5 V legacy equipment. Enhanced IEC ESD protection is especially valuable when instruments are frequently connected and disconnected by operators. Keep the connector-side traces isolated from sensitive analog measurement paths and provide a continuous ground reference between the board and the connected device.

📷

Barcode and Scanning Systems

The MAX3243EIDW is appropriate for barcode readers, scanners, and weighing systems that expose an RS-232 connector to repeated plugging and unplugging. Its enhanced E-version transient ratings are stronger than those of a standard MAX3243, which helps preserve receiver operation when a scanner cable experiences electrostatic discharge. The 500 kbps maximum rate is more than adequate for conventional scanner character streams and short status frames. Mount the device close to the DB9 or equivalent connector, keep input and output routing separated where possible, and follow the datasheet bypass network. This arrangement improves protection without adding a separate external TVS on every connection.

🖥️

Embedded Service and Diagnostic Ports

Embedded systems often retain an RS-232 service port even when primary communication uses USB or Ethernet. The MAX3243EIDW provides a 3 V to 5.5 V interface that can bridge a 3.3 V processor to legacy service equipment and provide multiple diagnostic channels. Its 500 kbps capability supports firmware logs, boot traces, and configuration exchanges. Because service connectors are frequently touched during maintenance, the ±15 kV IEC air-gap and ±8 kV IEC contact protection ratings add resilience. Use the manufacturer reference network and place the transceiver adjacent to the connector. Separate the RS-232 traces from high-speed clocks and switching-supply nodes to minimize coupling.

🧪

Test and Measurement Equipment

Test instruments with several remote RS-232 commands benefit from the MAX3243EIDW's multichannel arrangement. Five receiver inputs can monitor multiple peripherals, and the driver outputs can send setup and trigger commands at up to 500 kbps. The single 3 V to 5.5 V supply operation simplifies mixed-voltage test systems compared with older dual-supply RS-232 implementations. For benchtop instruments that may be connected to grounded laboratory equipment, maintain a low-impedance ground connection and route the serial lines directly away from sensitive front-end circuitry. Enhanced ESD protection is helpful for portable instruments, but it does not replace correct connector grounding and cable management.

🎧

RS-232 Communication in Audio and Control Equipment

Professional audio racks, remote-control units, and equipment controllers can use the MAX3243EIDW for auxiliary RS-232 control rather than audio signal transmission. The device handles low-speed command and status traffic up to 500 kbps while operating from the same 3 V to 5.5 V range commonly used in control boards. Keeping the transceiver close to the external connector shortens unprotected board-trace exposure and helps the integrated ESD protection perform as intended. Route these command interfaces away from microphone preamplifiers, clock lines, and switching regulators. The interface is suited to control and supervisory links, not for balanced audio or high-bandwidth data transport.

What is the operating voltage of the MAX3243EIDW?
The MAX3243EIDW operates from a 3 V to 5.5 V supply. According to the Texas Instruments MAX3243E product information, this range supports both 3.3 V and 5 V system rails. The selected logic level must be compatible with the host controller, and supply bypass capacitors should be placed close to the device pins.
What is the maximum data rate of MAX3243EIDW?
The MAX3243EIDW supports signaling rates up to 500 kbps. The listed device description identifies it as a 3/5 multichannel RS-232 transceiver, and Texas Instruments lists the MAX3243E family as a 500 kbps line driver and receiver. Actual application throughput is also limited by the host UART and cable conditions.
What ESD protection does MAX3243EIDW provide?
The MAX3243EIDW provides ±15 kV IEC ESD protection for air-gap discharge and ±8 kV for contact discharge on serial-port connection pins. The MAX3243E family description identifies the enhanced E-version protection, making it a stronger choice than the standard MAX3243 family when connector cables are exposed to maintenance or industrial discharge events.
Where can I download the MAX3243EIDW datasheet?
The official MAX3243E product page is available at the Texas Instruments link on this page. From that page, open the MAX3243E datasheet and ordering-information documents to obtain pin assignments, electrical characteristics, recommended operating conditions, and the reference circuit. Use the exact MAX3243EIDW ordering suffix when checking package and temperature details.
Where can I find the MAX3243EIDW pinout?
The MAX3243EIDW pinout is shown in the MAX3243E datasheet pin-configuration table and the associated package drawings. Because the 28-SOIC footprint contains multiple driver and receiver connections, assign PCB nets from that table rather than from a generic RS-232 diagram. The complete device-level pin list is not reproduced here to avoid transcription errors.
Is MAX3243EIDW a drop-in replacement for MAX3243IDW?
The MAX3243EIDW is a pin-compatible industrial alternative to the MAX3243IDW when the higher ESD rating is acceptable. Both use the 28-SOIC configuration and provide the same RS-232 transceiver function, but the E-version is specified with ±15 kV IEC air-gap and ±8 kV IEC contact protection. Verify the board pinout and protection requirements before substitution.
What is the best drop-in replacement for MAX3243EIDW?
The closest same-family replacement is the MAX3243IDW, which retains the 28-SOIC footprint and RS-232 transceiver function but has lower ESD protection than the MAX3243EIDW. The MAX3243EIDB is another SOIC ordering option identified in comparison data. For industrial transient immunity, keep the MAX3243E enhanced-protection version instead of accepting a lower ESD rating.
How do MAX3243EIDW and MAX3244EEWI+ differ?
The MAX3243EIDW is a 3 V to 5.5 V, 500 kbps, 3/5-channel RS-232 transceiver with enhanced IEC ESD protection, while the MAX3244EEWI+ is a separate Analog Devices interface family used in RS-232 designs. Package and channel assignments must be checked against each datasheet before treating it as a direct substitute; do not rely on the device name alone.
Can MAX3243EIPWR replace MAX3243EIDW?
The MAX3243EIPWR is the same general MAX3243E transceiver family, but it is listed in a 28-TSSOP package rather than the 28-SOIC package used by the MAX3243EIDW. It is therefore not a land-pattern drop-in replacement. A board change is required unless the PCB provides both a SOIC and TSSOP footprint.
When should I choose MAX3243EIDW over a standard MAX3243?
Choose the MAX3243EIDW when a field-accessible RS-232 connector is exposed to electrostatic discharge or industrial wiring conditions. The enhanced E-version is specified at ±15 kV for IEC air-gap discharge and ±8 kV for contact discharge, while the standard MAX3243IDW is primarily a lower-protection option. For protected, short, internal links, the standard version may be sufficient.
Is MAX3243EIDW suitable for industrial control equipment?
The MAX3243EIDW is identified as an industrial-temperature grade device and is designed for multichannel RS-232 interfaces. Its 3 V to 5.5 V supply range and enhanced ESD protection suit industrial controllers, test equipment, and data-acquisition systems. Confirm the exact operating-temperature limits and isolation strategy in the manufacturer datasheet for the final system.
How should RS-232 traces be routed on a MAX3243EIDW PCB?
Route each MAX3243EIDW driver and receiver connection toward its corresponding connector with minimal trace length and no unnecessary stubs. Keep logic-side nets away from connector-facing RS-232 traces, use a solid ground plane, and follow the datasheet bypass-capacitor recommendations. ESD protection is most effective when the connector-side return path is short and continuous.
What is the key specification difference between MAX3243EIDW and MAX3232ECDR?
The MAX3243EIDW is a 3/5-channel device in a 28-SOIC package with a 500 kbps maximum data rate, while the MAX3232ECDR is a smaller 16-pin dual-channel RS-232 transceiver family member. They serve different port-count and footprint requirements, so the MAX3232ECDR is not a direct drop-in replacement for the MAX3243EIDW.
Where can I buy MAX3243EIDW online?
Use the Request a Quote form on this page to request current availability, volume pricing, and lead time for the MAX3243EIDW. The form allows you to specify the required quantity and package suffix directly. Current commercial terms should be confirmed through the quote response rather than relying on an archived listing.
What is the price of MAX3243EIDW?
The MAX3243EIDW is priced through the Request a Quote form on this page, which reflects current volume and sourcing terms. Use the form to request the latest unit price, quantity breaks, and delivery schedule. A live quote is preferable because distributor inventory, lifecycle conditions, and market pricing can change independently of the device datasheet.
What is the lead time and stock status for MAX3243EIDW?
Current stock and lead time for the MAX3243EIDW should be requested through the Request a Quote form on this page. Provide your target quantity, date code requirements, and acceptable delivery window with the inquiry. The response will confirm current allocation rather than relying on a historical availability statement.
What are the key specifications engineers should know about MAX3243EIDW?
The MAX3243EIDW is a 28-SOIC, 3/5-channel RS-232 transceiver rated for 3 V to 5.5 V supply and 500 kbps signaling. Its connector-facing pins include ±15 kV IEC air-gap and ±8 kV IEC contact ESD protection. The industrial-temperature ordering designation, single-supply operation, and multichannel integration are the primary design considerations.

Dados de referência de engenharia para MAX3243EIDW — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the MAX3243EIDW for industrial, test, or service interfaces that combine multiple RS-232 channels with a 3.3 V or 5 V system supply and require enhanced IEC ESD protection on connector-facing pins. MAX3243IDW is the closest lower-protection second source in the same 28-SOIC family; use it when transient exposure is limited and the board has been checked against its pin configuration. MAX3243EIDB offers another same-family ordering path, but its temperature and package construction details should be confirmed. MAX3243CWI-T remains in the 28-SOIC family but does not provide the enhanced E-version protection. MAX3244EEWI+ is useful as a cross-brand design-review option when its channel count, enable logic, supply limits, and protection ratings satisfy the system requirements. For any substitution, verify the land pattern, pin names, signal-direction assignments, bypass network, and connector-return layout.

Comparação com alternativas

Parâmetro Este produto MAX3243IDW MAX3243EIDB MAX3243CWI-T MAX3244EEWI+
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Analog Devices
Package 28-SOIC, 0.295 inch width 28-SOIC 28-SOIC 28-SOIC 28-SOIC
Device Type 3/5 multichannel RS-232 transceiver 3/5 RS-232 transceiver 3/5 RS-232 transceiver 3/5 RS-232 transceiver Multichannel RS-232 transceiver

Principais diferenciais

  • Enhanced connector-pin ESD protection (vs MAX3243IDW)
  • Multichannel integration in one 28-SOIC package (vs MAX3232ECDR)
  • Single-supply 3 V to 5.5 V operation (vs MAX3244EEWI+)

Notas de projeto

Place the MAX3243EIDW adjacent to the RS-232 connector and route connector-facing pins directly to it. Keep logic-side nets away from these traces, use a continuous ground plane, and avoid long stubs. The enhanced ESD ratings depend on a short return path and correct bypass-capacitor placement; review the pin-configuration table and reference circuit in the manufacturer datasheet before routing.

Decouple the 3 V to 5.5 V supply at the device with the recommended ceramic bypass network from the datasheet. Keep the capacitor connection to the power and ground pins as short as possible, and avoid sharing a narrow return-current path with switching nodes or relay coils. This reduces supply transients that could disturb receiver thresholds or driver outputs.

Do not substitute a 28-TSSOP version for the 28-SOIC MAX3243EIDW without a PCB footprint change. Likewise, do not treat the MAX3243IPWR as a board-level drop-in replacement. For second sourcing, confirm pin names, enable-pin logic, channel assignments, supply-current behavior, and ESD ratings against both datasheets. The E-version protection advantage should be preserved for exposed connectors.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The MAX3243EIDW is identified as an industrial-temperature-grade interface IC. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation on the current manufacturer product or material-declaration documentation.

Dados verificados em: 2026-11-17 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

MAX3243EIDW datasheet MAX3243EIDW pinout MAX3243EIDW datasheet pdf MAX3243EIDW equivalent MAX3243EIDW replacement MAX3243EIDW cross reference MAX3243EIDW vs MAX3243IDW MAX3243EIDW 28-SOIC footprint MAX3243EIDW RS-232 schematic MAX3243EIDW price MAX3243EIDW stock Texas Instruments MAX3243EIDW MAX3243EIDW ESD protection MAX3243EIDW industrial RS-232 28-SOIC RS-232 500 kbps transceiver

Componentes & termos relacionados

Texas Instruments MAX3243EIDW MAX3243E MAX3243IDW MAX3243EIDB MAX3243CWI-T MAX3244EEWI+ Analog Devices RS-232 line driver line receiver multichannel transceiver interface IC semiconductor 3.3 V logic 5 V logic 500 kbps IEC ESD protection HBM ESD protection surface mount 28-SOIC SOIC package family industrial control test and measurement
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ