MAX3243EIDW - 3/5 RS-232 Transceiver | Texas Instruments
MPN: MAX3243EIDW ✓ 啟用中MAX3243EIDW 概覽
An RS-232 transceiver combines line drivers and line receivers in one interface circuit. The driver converts logic-level inputs into RS-232 bipolar levels, while the receiver converts differential, bipolar serial signals back into logic-compatible outputs. This MAX3243E device is positioned as a 3/5 transceiver for multichannel designs, allowing several RS-232 ports to share one package while reducing the number of external interface components.
Key characteristics include a 500 kbps maximum signaling rate, operation across a 3 V to 5.5 V supply range, and industrial-temperature identification in the MAX3243EIDW ordering code. The E suffix denotes the enhanced ESD-protection family, making the device preferable to standard MAX3243 variants when exposed cables, connector contacts, or industrial wiring can introduce electrostatic discharge transients. The 28-pin SOIC footprint supports conventional through-hole or surface-mount assembly and is convenient for designs migrating from discrete RS-232 driver and receiver pairs.
The MAX3243E is designed to meet the electrical requirements of the RS-232 standard while offering low-power operation from a single supply. The wide supply range permits use in systems with 3.3 V or 5 V logic rails, provided the interface is configured for the selected operating voltage. The transceiver architecture also allows designers to place receive and transmit functions close to a connector, reducing susceptibility to noise on long interconnects.
Typical applications include industrial control consoles, serial test equipment, barcode and scanning systems, laboratory instrumentation, data-logging equipment, and RS-232 ports in embedded systems. The device is particularly useful where a cable-mounted connector can be exposed to electrostatic discharge during maintenance, plugging, or operation in electrically noisy environments.
When laying out a board using the MAX3243EIDW, route each RS-232 driver and receiver connection directly to its connector and keep sensitive logic traces away from those protected connector pins. Confirm supply decoupling, grounding, and connector-return continuity in the manufacturer datasheet reference circuit. For systems requiring a different channel count or package, use the pin-configuration table and ordering information from the MAX3243E datasheet before selecting a substitute.
直接替換替代品,適用於 MAX3243EIDW — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3243EIDW (相同外形與佔位) — 差異在於 Package, Maximum Data Rate, ESD Protection, Product Type, Number of Receivers.
MAX3243IDW
✅ 直接替換聯絡詢價
查看資料表 →MAX3243EIDB
✅ 直接替換聯絡詢價
查看資料表 →MAX3243CWI-T
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3244EEWI+
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3243EIDW 規格
| Product Type | RS-232 line driver/receiver transceiver |
| Channel Configuration | 3/5 multichannel transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps |
| ESD Protection, IEC Air Gap | ±15 kV |
| ESD Protection, IEC Contact | ±8 kV |
| Number of Receivers | 5 |
| Duplex Operation | Full duplex |
| Interface Standard | RS-232 |
| 封裝 | 28-SOIC, 0.295 inch width, 7.50 mm |
| Package Type | Gull-wing surface-mount SOIC |
| Terminals | 28 |
| Temperature Grade | Industrial |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Unknown |
| REACH Status | Unknown |
| Lead-Free Status | Unknown |
| Halogen-Free Status | Unknown |
| Automotive AEC-Q100 Qualification | Not applicable |
MAX3243EIDW gull-wing surface-mount soic 腳位配置指南
MAX3243EIDW(gull-wing surface-mount soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3243EIDW.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3243EIDW 適用於 6 應用s: Industrial Serial Control Console, RS-232 Data-Acquisition Equipment, Barcode and Scanning Systems, Embedded Service and Diagnostic Ports, Test and Measurement Equipment, RS-232 Communication in Audio and Control Equipment.
Industrial Serial Control Console
The MAX3243EIDW fits an industrial console that combines several RS-232 links with a 3.3 V or 5 V controller. Its 3 V to 5.5 V operating range supports both supply arrangements, while the 500 kbps signaling rate provides headroom for command traffic and diagnostic data. The ±15 kV IEC air-gap and ±8 kV IEC contact ratings add useful transient tolerance on cables connected to service equipment. Place the transceiver near the serial connectors so protected pins connect through short, direct routes. Compared with a discrete driver/receiver approach, the multichannel package reduces footprint and assembly effort while centralizing ESD protection.
推薦
RS-232 Data-Acquisition Equipment
Laboratory and field data-acquisition equipment can use the MAX3243EIDW to connect several instruments or legacy peripherals to a control computer. The five-receiver arrangement supports multiple input channels, while the driver outputs handle outbound control commands at rates up to 500 kbps. Operation from 3 V to 5.5 V allows the interface to sit between a modern embedded processor and 5 V legacy equipment. Enhanced IEC ESD protection is especially valuable when instruments are frequently connected and disconnected by operators. Keep the connector-side traces isolated from sensitive analog measurement paths and provide a continuous ground reference between the board and the connected device.
推薦
Barcode and Scanning Systems
The MAX3243EIDW is appropriate for barcode readers, scanners, and weighing systems that expose an RS-232 connector to repeated plugging and unplugging. Its enhanced E-version transient ratings are stronger than those of a standard MAX3243, which helps preserve receiver operation when a scanner cable experiences electrostatic discharge. The 500 kbps maximum rate is more than adequate for conventional scanner character streams and short status frames. Mount the device close to the DB9 or equivalent connector, keep input and output routing separated where possible, and follow the datasheet bypass network. This arrangement improves protection without adding a separate external TVS on every connection.
推薦
Embedded Service and Diagnostic Ports
Embedded systems often retain an RS-232 service port even when primary communication uses USB or Ethernet. The MAX3243EIDW provides a 3 V to 5.5 V interface that can bridge a 3.3 V processor to legacy service equipment and provide multiple diagnostic channels. Its 500 kbps capability supports firmware logs, boot traces, and configuration exchanges. Because service connectors are frequently touched during maintenance, the ±15 kV IEC air-gap and ±8 kV IEC contact protection ratings add resilience. Use the manufacturer reference network and place the transceiver adjacent to the connector. Separate the RS-232 traces from high-speed clocks and switching-supply nodes to minimize coupling.
推薦
Test and Measurement Equipment
Test instruments with several remote RS-232 commands benefit from the MAX3243EIDW's multichannel arrangement. Five receiver inputs can monitor multiple peripherals, and the driver outputs can send setup and trigger commands at up to 500 kbps. The single 3 V to 5.5 V supply operation simplifies mixed-voltage test systems compared with older dual-supply RS-232 implementations. For benchtop instruments that may be connected to grounded laboratory equipment, maintain a low-impedance ground connection and route the serial lines directly away from sensitive front-end circuitry. Enhanced ESD protection is helpful for portable instruments, but it does not replace correct connector grounding and cable management.
推薦
RS-232 Communication in Audio and Control Equipment
Professional audio racks, remote-control units, and equipment controllers can use the MAX3243EIDW for auxiliary RS-232 control rather than audio signal transmission. The device handles low-speed command and status traffic up to 500 kbps while operating from the same 3 V to 5.5 V range commonly used in control boards. Keeping the transceiver close to the external connector shortens unprotected board-trace exposure and helps the integrated ESD protection perform as intended. Route these command interfaces away from microphone preamplifiers, clock lines, and switching regulators. The interface is suited to control and supervisory links, not for balanced audio or high-bandwidth data transport.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3243EIDW — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3243IDW | MAX3243EIDB | MAX3243CWI-T | MAX3244EEWI+ |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Package | 28-SOIC, 0.295 inch width | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC |
| Device Type | 3/5 multichannel RS-232 transceiver | 3/5 RS-232 transceiver | 3/5 RS-232 transceiver | 3/5 RS-232 transceiver | Multichannel RS-232 transceiver |
主要差異化特點
- Enhanced connector-pin ESD protection (對比MAX3243IDW)
- Multichannel integration in one 28-SOIC package (對比MAX3232ECDR)
- Single-supply 3 V to 5.5 V operation (對比MAX3244EEWI+)
設計說明
Place the MAX3243EIDW adjacent to the RS-232 connector and route connector-facing pins directly to it. Keep logic-side nets away from these traces, use a continuous ground plane, and avoid long stubs. The enhanced ESD ratings depend on a short return path and correct bypass-capacitor placement; review the pin-configuration table and reference circuit in the manufacturer datasheet before routing.
Decouple the 3 V to 5.5 V supply at the device with the recommended ceramic bypass network from the datasheet. Keep the capacitor connection to the power and ground pins as short as possible, and avoid sharing a narrow return-current path with switching nodes or relay coils. This reduces supply transients that could disturb receiver thresholds or driver outputs.
Do not substitute a 28-TSSOP version for the 28-SOIC MAX3243EIDW without a PCB footprint change. Likewise, do not treat the MAX3243IPWR as a board-level drop-in replacement. For second sourcing, confirm pin names, enable-pin logic, channel assignments, supply-current behavior, and ESD ratings against both datasheets. The E-version protection advantage should be preserved for exposed connectors.
合規資訊
The MAX3243EIDW is identified as an industrial-temperature-grade interface IC. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation on the current manufacturer product or material-declaration documentation.