MAX3243EIDW - 3/5 RS-232 Transceiver | Texas Instruments
MPN: MAX3243EIDW ✓ Hoạt độngMAX3243EIDW Tóm tắt
An RS-232 transceiver combines line drivers and line receivers in one interface circuit. The driver converts logic-level inputs into RS-232 bipolar levels, while the receiver converts differential, bipolar serial signals back into logic-compatible outputs. This MAX3243E device is positioned as a 3/5 transceiver for multichannel designs, allowing several RS-232 ports to share one package while reducing the number of external interface components.
Key characteristics include a 500 kbps maximum signaling rate, operation across a 3 V to 5.5 V supply range, and industrial-temperature identification in the MAX3243EIDW ordering code. The E suffix denotes the enhanced ESD-protection family, making the device preferable to standard MAX3243 variants when exposed cables, connector contacts, or industrial wiring can introduce electrostatic discharge transients. The 28-pin SOIC footprint supports conventional through-hole or surface-mount assembly and is convenient for designs migrating from discrete RS-232 driver and receiver pairs.
The MAX3243E is designed to meet the electrical requirements of the RS-232 standard while offering low-power operation from a single supply. The wide supply range permits use in systems with 3.3 V or 5 V logic rails, provided the interface is configured for the selected operating voltage. The transceiver architecture also allows designers to place receive and transmit functions close to a connector, reducing susceptibility to noise on long interconnects.
Typical applications include industrial control consoles, serial test equipment, barcode and scanning systems, laboratory instrumentation, data-logging equipment, and RS-232 ports in embedded systems. The device is particularly useful where a cable-mounted connector can be exposed to electrostatic discharge during maintenance, plugging, or operation in electrically noisy environments.
When laying out a board using the MAX3243EIDW, route each RS-232 driver and receiver connection directly to its connector and keep sensitive logic traces away from those protected connector pins. Confirm supply decoupling, grounding, and connector-return continuity in the manufacturer datasheet reference circuit. For systems requiring a different channel count or package, use the pin-configuration table and ordering information from the MAX3243E datasheet before selecting a substitute.
Bộ thay thế dễ dàng lắp đặt cho MAX3243EIDW — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3243EIDW (cùng hình factor và footprint) — khác nhau ở Package, Maximum Data Rate, ESD Protection, Product Type, Number of Receivers.
MAX3243IDW
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243EIDB
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243CWI-T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3244EEWI+
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3243EIDW Thông số kỹ thuật
| Product Type | RS-232 line driver/receiver transceiver |
| Channel Configuration | 3/5 multichannel transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps |
| ESD Protection, IEC Air Gap | ±15 kV |
| ESD Protection, IEC Contact | ±8 kV |
| Number of Receivers | 5 |
| Duplex Operation | Full duplex |
| Interface Standard | RS-232 |
| Hộp | 28-SOIC, 0.295 inch width, 7.50 mm |
| Package Type | Gull-wing surface-mount SOIC |
| Terminals | 28 |
| Temperature Grade | Industrial |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | Unknown |
| REACH Status | Unknown |
| Lead-Free Status | Unknown |
| Halogen-Free Status | Unknown |
| Automotive AEC-Q100 Qualification | Not applicable |
Hướng dẫn cấu hình chân MAX3243EIDW gull-wing surface-mount soic
Cấu hình chân cho MAX3243EIDW (gull-wing surface-mount soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3243EIDW.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3243EIDW phù hợp cho 6 Áp dụngs: Industrial Serial Control Console, RS-232 Data-Acquisition Equipment, Barcode and Scanning Systems, Embedded Service and Diagnostic Ports, Test and Measurement Equipment, RS-232 Communication in Audio and Control Equipment.
Industrial Serial Control Console
The MAX3243EIDW fits an industrial console that combines several RS-232 links with a 3.3 V or 5 V controller. Its 3 V to 5.5 V operating range supports both supply arrangements, while the 500 kbps signaling rate provides headroom for command traffic and diagnostic data. The ±15 kV IEC air-gap and ±8 kV IEC contact ratings add useful transient tolerance on cables connected to service equipment. Place the transceiver near the serial connectors so protected pins connect through short, direct routes. Compared with a discrete driver/receiver approach, the multichannel package reduces footprint and assembly effort while centralizing ESD protection.
Được đề xuất
RS-232 Data-Acquisition Equipment
Laboratory and field data-acquisition equipment can use the MAX3243EIDW to connect several instruments or legacy peripherals to a control computer. The five-receiver arrangement supports multiple input channels, while the driver outputs handle outbound control commands at rates up to 500 kbps. Operation from 3 V to 5.5 V allows the interface to sit between a modern embedded processor and 5 V legacy equipment. Enhanced IEC ESD protection is especially valuable when instruments are frequently connected and disconnected by operators. Keep the connector-side traces isolated from sensitive analog measurement paths and provide a continuous ground reference between the board and the connected device.
Được đề xuất
Barcode and Scanning Systems
The MAX3243EIDW is appropriate for barcode readers, scanners, and weighing systems that expose an RS-232 connector to repeated plugging and unplugging. Its enhanced E-version transient ratings are stronger than those of a standard MAX3243, which helps preserve receiver operation when a scanner cable experiences electrostatic discharge. The 500 kbps maximum rate is more than adequate for conventional scanner character streams and short status frames. Mount the device close to the DB9 or equivalent connector, keep input and output routing separated where possible, and follow the datasheet bypass network. This arrangement improves protection without adding a separate external TVS on every connection.
Được đề xuất
Embedded Service and Diagnostic Ports
Embedded systems often retain an RS-232 service port even when primary communication uses USB or Ethernet. The MAX3243EIDW provides a 3 V to 5.5 V interface that can bridge a 3.3 V processor to legacy service equipment and provide multiple diagnostic channels. Its 500 kbps capability supports firmware logs, boot traces, and configuration exchanges. Because service connectors are frequently touched during maintenance, the ±15 kV IEC air-gap and ±8 kV IEC contact protection ratings add resilience. Use the manufacturer reference network and place the transceiver adjacent to the connector. Separate the RS-232 traces from high-speed clocks and switching-supply nodes to minimize coupling.
Được đề xuất
Test and Measurement Equipment
Test instruments with several remote RS-232 commands benefit from the MAX3243EIDW's multichannel arrangement. Five receiver inputs can monitor multiple peripherals, and the driver outputs can send setup and trigger commands at up to 500 kbps. The single 3 V to 5.5 V supply operation simplifies mixed-voltage test systems compared with older dual-supply RS-232 implementations. For benchtop instruments that may be connected to grounded laboratory equipment, maintain a low-impedance ground connection and route the serial lines directly away from sensitive front-end circuitry. Enhanced ESD protection is helpful for portable instruments, but it does not replace correct connector grounding and cable management.
Được đề xuất
RS-232 Communication in Audio and Control Equipment
Professional audio racks, remote-control units, and equipment controllers can use the MAX3243EIDW for auxiliary RS-232 control rather than audio signal transmission. The device handles low-speed command and status traffic up to 500 kbps while operating from the same 3 V to 5.5 V range commonly used in control boards. Keeping the transceiver close to the external connector shortens unprotected board-trace exposure and helps the integrated ESD protection perform as intended. Route these command interfaces away from microphone preamplifiers, clock lines, and switching regulators. The interface is suited to control and supervisory links, not for balanced audio or high-bandwidth data transport.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3243EIDW — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3243IDW | MAX3243EIDB | MAX3243CWI-T | MAX3244EEWI+ |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Package | 28-SOIC, 0.295 inch width | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC |
| Device Type | 3/5 multichannel RS-232 transceiver | 3/5 RS-232 transceiver | 3/5 RS-232 transceiver | 3/5 RS-232 transceiver | Multichannel RS-232 transceiver |
Bảo phân biệt quan trọng
- Enhanced connector-pin ESD protection (vsMAX3243IDW)
- Multichannel integration in one 28-SOIC package (vsMAX3232ECDR)
- Single-supply 3 V to 5.5 V operation (vsMAX3244EEWI+)
Ghi chú thiết kế
Place the MAX3243EIDW adjacent to the RS-232 connector and route connector-facing pins directly to it. Keep logic-side nets away from these traces, use a continuous ground plane, and avoid long stubs. The enhanced ESD ratings depend on a short return path and correct bypass-capacitor placement; review the pin-configuration table and reference circuit in the manufacturer datasheet before routing.
Decouple the 3 V to 5.5 V supply at the device with the recommended ceramic bypass network from the datasheet. Keep the capacitor connection to the power and ground pins as short as possible, and avoid sharing a narrow return-current path with switching nodes or relay coils. This reduces supply transients that could disturb receiver thresholds or driver outputs.
Do not substitute a 28-TSSOP version for the 28-SOIC MAX3243EIDW without a PCB footprint change. Likewise, do not treat the MAX3243IPWR as a board-level drop-in replacement. For second sourcing, confirm pin names, enable-pin logic, channel assignments, supply-current behavior, and ESD ratings against both datasheets. The E-version protection advantage should be preserved for exposed connectors.
Thông tin tuân thủ
The MAX3243EIDW is identified as an industrial-temperature-grade interface IC. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation on the current manufacturer product or material-declaration documentation.