MAX3243EIDW - 3/5 RS-232 Transceiver | Texas Instruments
料号: MAX3243EIDW ✓ 量产中MAX3243EIDW 概述
An RS-232 transceiver combines line drivers and line receivers in one interface circuit. The driver converts logic-level inputs into RS-232 bipolar levels, while the receiver converts differential, bipolar serial signals back into logic-compatible outputs. This MAX3243E device is positioned as a 3/5 transceiver for multichannel designs, allowing several RS-232 ports to share one package while reducing the number of external interface components.
Key characteristics include a 500 kbps maximum signaling rate, operation across a 3 V to 5.5 V supply range, and industrial-temperature identification in the MAX3243EIDW ordering code. The E suffix denotes the enhanced ESD-protection family, making the device preferable to standard MAX3243 variants when exposed cables, connector contacts, or industrial wiring can introduce electrostatic discharge transients. The 28-pin SOIC footprint supports conventional through-hole or surface-mount assembly and is convenient for designs migrating from discrete RS-232 driver and receiver pairs.
The MAX3243E is designed to meet the electrical requirements of the RS-232 standard while offering low-power operation from a single supply. The wide supply range permits use in systems with 3.3 V or 5 V logic rails, provided the interface is configured for the selected operating voltage. The transceiver architecture also allows designers to place receive and transmit functions close to a connector, reducing susceptibility to noise on long interconnects.
Typical applications include industrial control consoles, serial test equipment, barcode and scanning systems, laboratory instrumentation, data-logging equipment, and RS-232 ports in embedded systems. The device is particularly useful where a cable-mounted connector can be exposed to electrostatic discharge during maintenance, plugging, or operation in electrically noisy environments.
When laying out a board using the MAX3243EIDW, route each RS-232 driver and receiver connection directly to its connector and keep sensitive logic traces away from those protected connector pins. Confirm supply decoupling, grounding, and connector-return continuity in the manufacturer datasheet reference circuit. For systems requiring a different channel count or package, use the pin-configuration table and ordering information from the MAX3243E datasheet before selecting a substitute.
直接替换替代料: MAX3243EIDW ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MAX3243EIDW (相同外形与封装尺寸) ——差异在于 Package, Maximum Data Rate, ESD Protection, Product Type, Number of Receivers.
MAX3243IDW
✅ 直接替换联系询价
查看数据手册 →MAX3243EIDB
✅ 直接替换联系询价
查看数据手册 →MAX3243CWI-T
✅ 直接替换📋 参考替代料(不在目录中)
MAX3244EEWI+
✅ 直接替换📋 参考替代料(不在目录中)
MAX3243EIDW 规格参数
| Product Type | RS-232 line driver/receiver transceiver |
| Channel Configuration | 3/5 multichannel transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps |
| ESD Protection, IEC Air Gap | ±15 kV |
| ESD Protection, IEC Contact | ±8 kV |
| Number of Receivers | 5 |
| Duplex Operation | Full duplex |
| Interface Standard | RS-232 |
| 封装 | 28-SOIC, 0.295 inch width, 7.50 mm |
| Package Type | Gull-wing surface-mount SOIC |
| Terminals | 28 |
| Temperature Grade | Industrial |
| 安装类型 | Surface mount |
| RoHS 状态 | Unknown |
| REACH Status | Unknown |
| Lead-Free Status | Unknown |
| Halogen-Free Status | Unknown |
| Automotive AEC-Q100 Qualification | Not applicable |
MAX3243EIDW gull-wing surface-mount soic 引脚配置指南
MAX3243EIDW(gull-wing surface-mount soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX3243EIDW.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX3243EIDW 适用于 6 应用s: Industrial Serial Control Console, RS-232 Data-Acquisition Equipment, Barcode and Scanning Systems, Embedded Service and Diagnostic Ports, Test and Measurement Equipment, RS-232 Communication in Audio and Control Equipment.
Industrial Serial Control Console
The MAX3243EIDW fits an industrial console that combines several RS-232 links with a 3.3 V or 5 V controller. Its 3 V to 5.5 V operating range supports both supply arrangements, while the 500 kbps signaling rate provides headroom for command traffic and diagnostic data. The ±15 kV IEC air-gap and ±8 kV IEC contact ratings add useful transient tolerance on cables connected to service equipment. Place the transceiver near the serial connectors so protected pins connect through short, direct routes. Compared with a discrete driver/receiver approach, the multichannel package reduces footprint and assembly effort while centralizing ESD protection.
推荐
RS-232 Data-Acquisition Equipment
Laboratory and field data-acquisition equipment can use the MAX3243EIDW to connect several instruments or legacy peripherals to a control computer. The five-receiver arrangement supports multiple input channels, while the driver outputs handle outbound control commands at rates up to 500 kbps. Operation from 3 V to 5.5 V allows the interface to sit between a modern embedded processor and 5 V legacy equipment. Enhanced IEC ESD protection is especially valuable when instruments are frequently connected and disconnected by operators. Keep the connector-side traces isolated from sensitive analog measurement paths and provide a continuous ground reference between the board and the connected device.
推荐
Barcode and Scanning Systems
The MAX3243EIDW is appropriate for barcode readers, scanners, and weighing systems that expose an RS-232 connector to repeated plugging and unplugging. Its enhanced E-version transient ratings are stronger than those of a standard MAX3243, which helps preserve receiver operation when a scanner cable experiences electrostatic discharge. The 500 kbps maximum rate is more than adequate for conventional scanner character streams and short status frames. Mount the device close to the DB9 or equivalent connector, keep input and output routing separated where possible, and follow the datasheet bypass network. This arrangement improves protection without adding a separate external TVS on every connection.
推荐
Embedded Service and Diagnostic Ports
Embedded systems often retain an RS-232 service port even when primary communication uses USB or Ethernet. The MAX3243EIDW provides a 3 V to 5.5 V interface that can bridge a 3.3 V processor to legacy service equipment and provide multiple diagnostic channels. Its 500 kbps capability supports firmware logs, boot traces, and configuration exchanges. Because service connectors are frequently touched during maintenance, the ±15 kV IEC air-gap and ±8 kV IEC contact protection ratings add resilience. Use the manufacturer reference network and place the transceiver adjacent to the connector. Separate the RS-232 traces from high-speed clocks and switching-supply nodes to minimize coupling.
推荐
Test and Measurement Equipment
Test instruments with several remote RS-232 commands benefit from the MAX3243EIDW's multichannel arrangement. Five receiver inputs can monitor multiple peripherals, and the driver outputs can send setup and trigger commands at up to 500 kbps. The single 3 V to 5.5 V supply operation simplifies mixed-voltage test systems compared with older dual-supply RS-232 implementations. For benchtop instruments that may be connected to grounded laboratory equipment, maintain a low-impedance ground connection and route the serial lines directly away from sensitive front-end circuitry. Enhanced ESD protection is helpful for portable instruments, but it does not replace correct connector grounding and cable management.
推荐
RS-232 Communication in Audio and Control Equipment
Professional audio racks, remote-control units, and equipment controllers can use the MAX3243EIDW for auxiliary RS-232 control rather than audio signal transmission. The device handles low-speed command and status traffic up to 500 kbps while operating from the same 3 V to 5.5 V range commonly used in control boards. Keeping the transceiver close to the external connector shortens unprotected board-trace exposure and helps the integrated ESD protection perform as intended. Route these command interfaces away from microphone preamplifiers, clock lines, and switching regulators. The interface is suited to control and supervisory links, not for balanced audio or high-bandwidth data transport.
推荐
推荐产品汇总
工程参考数据: MAX3243EIDW ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX3243IDW | MAX3243EIDB | MAX3243CWI-T | MAX3244EEWI+ |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Package | 28-SOIC, 0.295 inch width | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC |
| Device Type | 3/5 multichannel RS-232 transceiver | 3/5 RS-232 transceiver | 3/5 RS-232 transceiver | 3/5 RS-232 transceiver | Multichannel RS-232 transceiver |
关键差异点
- Enhanced connector-pin ESD protection (对比 MAX3243IDW)
- Multichannel integration in one 28-SOIC package (对比 MAX3232ECDR)
- Single-supply 3 V to 5.5 V operation (对比 MAX3244EEWI+)
设计说明
Place the MAX3243EIDW adjacent to the RS-232 connector and route connector-facing pins directly to it. Keep logic-side nets away from these traces, use a continuous ground plane, and avoid long stubs. The enhanced ESD ratings depend on a short return path and correct bypass-capacitor placement; review the pin-configuration table and reference circuit in the manufacturer datasheet before routing.
Decouple the 3 V to 5.5 V supply at the device with the recommended ceramic bypass network from the datasheet. Keep the capacitor connection to the power and ground pins as short as possible, and avoid sharing a narrow return-current path with switching nodes or relay coils. This reduces supply transients that could disturb receiver thresholds or driver outputs.
Do not substitute a 28-TSSOP version for the 28-SOIC MAX3243EIDW without a PCB footprint change. Likewise, do not treat the MAX3243IPWR as a board-level drop-in replacement. For second sourcing, confirm pin names, enable-pin logic, channel assignments, supply-current behavior, and ESD ratings against both datasheets. The E-version protection advantage should be preserved for exposed connectors.
合规信息
The MAX3243EIDW is identified as an industrial-temperature-grade interface IC. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements require confirmation on the current manufacturer product or material-declaration documentation.