MC9S12DJ128MFUE - 16-bit HCS12 MCU, 128KB Flash, 80-LQFP | NXP
N.º da peça: MC9S12DJ128MFUE ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $18.45 | $18,45 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1.385,00 |
| 500 | $12.1 | $6.050,00 |
| 1.000 | $10.75 | $10.750,00 |
MC9S12DJ128MFUE Visão geral
A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and peripherals. The HCS12 family from NXP is a 16-bit CISC architecture widely used in automotive and industrial embedded systems because of its deterministic interrupt latency, robust on-chip peripherals, and broad ecosystem of development tools. MCUs sit at the top of the embedded hierarchy: MCU -> embedded controller -> semiconductor IC. The MC9S12DJ128 belongs to the S12XD sub-family, which adds an XGATE co-processor for offloading interrupt-driven tasks from the main CPU.
Key features include 128KB Flash, 8KB RAM, 2KB EEPROM, dual CAN 2.0A/B controllers, two SCI channels, two SPI channels, an 8-channel 10-bit ADC, an 8-channel PWM, and 59 I/O pins. The 50 MHz internal bus clock yields 25 MIPS of CPU throughput, while the integrated Background Debug Mode (BDM) and on-chip voltage regulator simplify in-system programming and field updates.
The architecture pairs the standard HCS12 CPU with a peripheral-rich bus matrix, hardware ECC for Flash integrity, and a clock-and-reset generator with PLL. Dual 5V-tolerant CAN controllers enable gateway and network-node applications where bus arbitration and message filtering are required at the silicon level rather than in driver software.
Typical applications include automotive body controllers, CAN gateway nodes, industrial PLCs, HVAC controllers, and sensor interface modules. The wide operating temperature range and dual CAN interfaces make it especially well-suited to vehicle network ECUs that must survive under-hood thermal stress.
When designing with this device, ensure the 2.35V-2.75V supply rail is well-decoupled and that the external crystal or resonator meets the datasheet's load-capacitance specification. The on-chip regulator requires an external pass transistor; refer to the reference schematic for component selection.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternativas drop-in para MC9S12DJ128MFUE — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MC9S12DJ128MFUE (mesmo formato e footprint) — diferindo em Package, Supply Voltage, Core Architecture, ADC, Core Processor.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MC9S12DJ128VFUE
✅ Drop-In✓ Em estoque
$29.9635 / unidade
Ver ficha técnica →MC9S12DJ128CFUE
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC9S12DG128CFUE
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC9S12DJ64MFUE
✅ Drop-In✓ Em estoque
$8.2 / unidade
Ver ficha técnica →MC9S12A128CFUE
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC9S12DJ128MFUE Classificações máximas e características elétricas
| Core Architecture | HCS12 (16-bit CISC) |
| Maximum Bus Clock | 50 MHz |
| Program Memory (Flash) | 128 KB (128K x 8) |
| RAM | 8 KB |
| EEPROM | 2 KB |
| Largura do barramento de dados | 16 bit |
| Tensão de alimentação | 2.35 V to 2.75 V (5V-tolerant I/O) |
| I/O Pins | 59 |
| A/D Channels | 8 (10-bit) |
| PWM Channels | 8 |
| CAN Controllers | 2 (CAN 2.0A/B) |
| SCI/UART | 2 |
| SPI | 2 |
| Encapsulamento | 80-LQFP (14x14 mm) |
| Temperatura de operação | -40C to +125C (automotive) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
Configuração de pinos do MC9S12DJ128MFUE
| Pino 1 | VDDR — Regulated power supply for internal logic |
| Pino 10 | PWM0 — Pulse-width modulator channel 0 |
| Pino 20 | PAD0 — Analog input / digital I/O channel 0 |
| Pino 30 | GND — Ground |
| Pino 40 | TXCAN0 — CAN0 transmit output |
| Pino 50 | RXCAN1 — CAN1 receive input |
| Pino 60 | SS — SPI slave select |
| Pino 70 | TCLK — Timer clock input |
| Pino 80 | RESET — Active-low reset input |
Aplicações típicas
MC9S12DJ128MFUE é adequado para 6 aplicaçãos: Automotive Body Control Module, Industrial CAN Gateway Node, HVAC Climate Controller, Sensor Interface Module, Battery Management Slave Node, Industrial PLC Logic Controller.
Automotive Body Control Module
The MC9S12DJ128MFUE's dual CAN 2.0 controllers and 128 KB Flash make it a fit for automotive body controllers that aggregate lighting, mirror, and door-lock sub-buses into the vehicle CAN backbone. The HCS12's deterministic interrupt latency and 50 MHz bus clock support real-time control of body electronics without jitter. Operating from 2.35 V to 2.75 V with 5 V-tolerant I/O, the part interfaces directly to 12 V body networks via external transceivers. The -40 C to +125 C automotive temperature grade supports under-hood deployment.
Recomendado
Industrial CAN Gateway Node
Industrial CAN-to-CAN gateway designs benefit from the MC9S12DJ128MFUE's dual CAN controllers, allowing simultaneous bridging between two independent CAN buses at different bit rates. The 128 KB Flash accommodates full CANopen or DeviceNet stack implementations, while the XGATE co-processor offloads CAN message filtering from the CPU for deterministic throughput. With 59 I/O pins and an 8-channel 10-bit ADC, the same MCU can also handle local sensor aggregation and digital I/O expansion.
Recomendado
HVAC Climate Controller
The MC9S12DJ128MFUE's 8-channel 10-bit ADC and 8-channel PWM provide the analog and motor-control peripherals required for HVAC climate controllers. The ADC reads thermistor temperature sensors and pressure transducers while the PWM channels drive brushless DC fan motors and damper actuators. The 128 KB Flash holds the closed-loop PID control algorithm and user-interface state machine. AEC-Q100-style automotive temperature grade ensures reliable operation behind the dashboard.
Recomendado
Sensor Interface Module
Sensor interface modules that aggregate analog and digital sensor data onto a CAN bus can leverage the MC9S12DJ128MFUE's 8-channel ADC, dual SCI, and dual SPI peripherals. The 8 KB RAM buffers sensor samples at high acquisition rates, while 128 KB Flash stores calibration tables and linearization coefficients. The Background Debug Mode enables in-field firmware updates for sensor-module recalibration without removing the unit from service.
Recomendado
Battery Management Slave Node
Distributed battery management systems use MC9S12DJ128MFUE as a slave node that monitors individual cell voltages and temperatures and reports them over CAN to a master BMS controller. The 10-bit ADC samples up to 8 cell voltages per chip, and the dual CAN allows redundant bus paths for fail-safe operation. The 2 KB EEPROM stores lifetime cycle-count data and cell-balancing history that survives power-down events.
Recomendado
Industrial PLC Logic Controller
Compact industrial PLCs use the MC9S12DJ128MFUE as the central logic controller for small-footprint automation cells with mixed digital and analog I/O. The 59 I/O pins support up to four 16-bit counters or a combination of digital inputs, digital outputs, and PWM channels. The dual SCI provides dual RS-232/RS-485 ports for HMI panel and field-bus communication. The HCS12's deterministic interrupt latency simplifies IEC 61131-3 logic execution.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MC9S12DJ128MFUE — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MC9S12DJ128VFUE | MC9S12DJ128CFUE | MC9S12DG128CFUE | MC9S12DJ64MFUE | MC9S12A128CFUE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-LQFP (14x14 mm) | 80-LQFP - same | 80-LQFP - same | 80-LQFP - same | 80-LQFP - same | 80-LQFP - same |
| Flash | 128 KB | 128 KB | 128 KB | 128 KB | 64 KB | 128 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 4 KB | 8 KB |
| CAN Controllers | 2 (CAN 2.0A/B) | 2 | 2 | 2 | 2 | 0 |
| XGATE Co-processor | Yes | Yes | Yes | No | Yes | No |
| Max Bus Clock | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Operating Temperature | -40C to +125C | -40C to +105C | -40C to +85C | -40C to +85C | -40C to +125C | -40C to +85C |
Principais diferenciais
- Dual CAN 2.0A/B controllers integrated (vs MC9S12A128CFUE)
- XGATE co-processor for DMA-style peripheral offload (vs MC9S12DG128CFUE)
- Full 128 KB Flash with ECC (vs MC9S12DJ64MFUE)
Notas de projeto
The MC9S12DJ128MFUE integrates a voltage regulator that requires an external NPN ballast transistor (typically a BC847C) on the VREG pin. Decouple VDDA, VDDR, and VDDX pins with separate 0.1 uF and 4.7 uF ceramic capacitors placed within 5 mm of the package. According to NXP reference schematics, the regulator output supplies the internal logic while the VDDX rail supplies the I/O drivers - both must be present for the MCU to start.
A common pitfall is omitting the PLL filter components. The MC9S12DJ128MFUE PLL requires a 0.1 uF capacitor on the XFC pin and a 1 nF capacitor on the VDDPLL pin, plus a series resistor on the PLL loop. According to the manufacturer datasheet, missing these components causes lock-detect failures and intermittent bus-clock jitter. Always include the reference-design PLL network exactly as specified.
Route the CANH and CANL differential pair with 100 ohm differential impedance, length-matched within 5 mm, and kept clear of switching signals. According to NXP application notes, the ground reference under the CAN pair must be unbroken to maintain signal integrity. Place the optional split-terminal termination at the connector end, not at the MCU end, to maximize DC bias stability.
Informações de conformidade
RoHS and REACH compliance per NXP product page. AEC-Q100 qualified for automotive applications. Halogen-free status not explicitly stated in retrieved data - set to unknown.
