MC9S12DJ128MFUE - 16-bit HCS12 MCU, 128KB Flash, 80-LQFP | NXP
Référence : MC9S12DJ128MFUE ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $18.45 | $18,45 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1 385,00 |
| 500 | $12.1 | $6 050,00 |
| 1 000 | $10.75 | $10 750,00 |
MC9S12DJ128MFUE Présentation
A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and peripherals. The HCS12 family from NXP is a 16-bit CISC architecture widely used in automotive and industrial embedded systems because of its deterministic interrupt latency, robust on-chip peripherals, and broad ecosystem of development tools. MCUs sit at the top of the embedded hierarchy: MCU -> embedded controller -> semiconductor IC. The MC9S12DJ128 belongs to the S12XD sub-family, which adds an XGATE co-processor for offloading interrupt-driven tasks from the main CPU.
Key features include 128KB Flash, 8KB RAM, 2KB EEPROM, dual CAN 2.0A/B controllers, two SCI channels, two SPI channels, an 8-channel 10-bit ADC, an 8-channel PWM, and 59 I/O pins. The 50 MHz internal bus clock yields 25 MIPS of CPU throughput, while the integrated Background Debug Mode (BDM) and on-chip voltage regulator simplify in-system programming and field updates.
The architecture pairs the standard HCS12 CPU with a peripheral-rich bus matrix, hardware ECC for Flash integrity, and a clock-and-reset generator with PLL. Dual 5V-tolerant CAN controllers enable gateway and network-node applications where bus arbitration and message filtering are required at the silicon level rather than in driver software.
Typical applications include automotive body controllers, CAN gateway nodes, industrial PLCs, HVAC controllers, and sensor interface modules. The wide operating temperature range and dual CAN interfaces make it especially well-suited to vehicle network ECUs that must survive under-hood thermal stress.
When designing with this device, ensure the 2.35V-2.75V supply rail is well-decoupled and that the external crystal or resonator meets the datasheet's load-capacitance specification. The on-chip regulator requires an external pass transistor; refer to the reference schematic for component selection.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour MC9S12DJ128MFUE — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC9S12DJ128MFUE (même facteur de forme et même empreinte) — différant par Package, Supply Voltage, Core Architecture, ADC, Core Processor.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MC9S12DJ128VFUE
✅ Remplacement direct✓ En stock
$29.9635 / unité
Voir la fiche technique →MC9S12DJ128CFUE
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S12DG128CFUE
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S12DJ64MFUE
✅ Remplacement direct✓ En stock
$8.2 / unité
Voir la fiche technique →MC9S12A128CFUE
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S12DJ128MFUE Valeurs maximales et caractéristiques électriques
| Core Architecture | HCS12 (16-bit CISC) |
| Maximum Bus Clock | 50 MHz |
| Program Memory (Flash) | 128 KB (128K x 8) |
| RAM | 8 KB |
| EEPROM | 2 KB |
| Largeur du bus de données | 16 bit |
| Tension d'alimentation | 2.35 V to 2.75 V (5V-tolerant I/O) |
| I/O Pins | 59 |
| A/D Channels | 8 (10-bit) |
| PWM Channels | 8 |
| CAN Controllers | 2 (CAN 2.0A/B) |
| SCI/UART | 2 |
| SPI | 2 |
| Boîtier | 80-LQFP (14x14 mm) |
| Température de fonctionnement | -40C to +125C (automotive) |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de MC9S12DJ128MFUE
| Broche 1 | VDDR — Regulated power supply for internal logic |
| Broche 10 | PWM0 — Pulse-width modulator channel 0 |
| Broche 20 | PAD0 — Analog input / digital I/O channel 0 |
| Broche 30 | GND — Ground |
| Broche 40 | TXCAN0 — CAN0 transmit output |
| Broche 50 | RXCAN1 — CAN1 receive input |
| Broche 60 | SS — SPI slave select |
| Broche 70 | TCLK — Timer clock input |
| Broche 80 | RESET — Active-low reset input |
Applications typiques
MC9S12DJ128MFUE convient pour 6 applications: Automotive Body Control Module, Industrial CAN Gateway Node, HVAC Climate Controller, Sensor Interface Module, Battery Management Slave Node, Industrial PLC Logic Controller.
Automotive Body Control Module
The MC9S12DJ128MFUE's dual CAN 2.0 controllers and 128 KB Flash make it a fit for automotive body controllers that aggregate lighting, mirror, and door-lock sub-buses into the vehicle CAN backbone. The HCS12's deterministic interrupt latency and 50 MHz bus clock support real-time control of body electronics without jitter. Operating from 2.35 V to 2.75 V with 5 V-tolerant I/O, the part interfaces directly to 12 V body networks via external transceivers. The -40 C to +125 C automotive temperature grade supports under-hood deployment.
Recommandé
Industrial CAN Gateway Node
Industrial CAN-to-CAN gateway designs benefit from the MC9S12DJ128MFUE's dual CAN controllers, allowing simultaneous bridging between two independent CAN buses at different bit rates. The 128 KB Flash accommodates full CANopen or DeviceNet stack implementations, while the XGATE co-processor offloads CAN message filtering from the CPU for deterministic throughput. With 59 I/O pins and an 8-channel 10-bit ADC, the same MCU can also handle local sensor aggregation and digital I/O expansion.
Recommandé
HVAC Climate Controller
The MC9S12DJ128MFUE's 8-channel 10-bit ADC and 8-channel PWM provide the analog and motor-control peripherals required for HVAC climate controllers. The ADC reads thermistor temperature sensors and pressure transducers while the PWM channels drive brushless DC fan motors and damper actuators. The 128 KB Flash holds the closed-loop PID control algorithm and user-interface state machine. AEC-Q100-style automotive temperature grade ensures reliable operation behind the dashboard.
Recommandé
Sensor Interface Module
Sensor interface modules that aggregate analog and digital sensor data onto a CAN bus can leverage the MC9S12DJ128MFUE's 8-channel ADC, dual SCI, and dual SPI peripherals. The 8 KB RAM buffers sensor samples at high acquisition rates, while 128 KB Flash stores calibration tables and linearization coefficients. The Background Debug Mode enables in-field firmware updates for sensor-module recalibration without removing the unit from service.
Recommandé
Battery Management Slave Node
Distributed battery management systems use MC9S12DJ128MFUE as a slave node that monitors individual cell voltages and temperatures and reports them over CAN to a master BMS controller. The 10-bit ADC samples up to 8 cell voltages per chip, and the dual CAN allows redundant bus paths for fail-safe operation. The 2 KB EEPROM stores lifetime cycle-count data and cell-balancing history that survives power-down events.
Recommandé
Industrial PLC Logic Controller
Compact industrial PLCs use the MC9S12DJ128MFUE as the central logic controller for small-footprint automation cells with mixed digital and analog I/O. The 59 I/O pins support up to four 16-bit counters or a combination of digital inputs, digital outputs, and PWM channels. The dual SCI provides dual RS-232/RS-485 ports for HMI panel and field-bus communication. The HCS12's deterministic interrupt latency simplifies IEC 61131-3 logic execution.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC9S12DJ128MFUE — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC9S12DJ128VFUE | MC9S12DJ128CFUE | MC9S12DG128CFUE | MC9S12DJ64MFUE | MC9S12A128CFUE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-LQFP (14x14 mm) | 80-LQFP - same | 80-LQFP - same | 80-LQFP - same | 80-LQFP - same | 80-LQFP - same |
| Flash | 128 KB | 128 KB | 128 KB | 128 KB | 64 KB | 128 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 4 KB | 8 KB |
| CAN Controllers | 2 (CAN 2.0A/B) | 2 | 2 | 2 | 2 | 0 |
| XGATE Co-processor | Yes | Yes | Yes | No | Yes | No |
| Max Bus Clock | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Operating Temperature | -40C to +125C | -40C to +105C | -40C to +85C | -40C to +85C | -40C to +125C | -40C to +85C |
Principaux différenciateurs
- Dual CAN 2.0A/B controllers integrated (vs MC9S12A128CFUE)
- XGATE co-processor for DMA-style peripheral offload (vs MC9S12DG128CFUE)
- Full 128 KB Flash with ECC (vs MC9S12DJ64MFUE)
Notes de conception
The MC9S12DJ128MFUE integrates a voltage regulator that requires an external NPN ballast transistor (typically a BC847C) on the VREG pin. Decouple VDDA, VDDR, and VDDX pins with separate 0.1 uF and 4.7 uF ceramic capacitors placed within 5 mm of the package. According to NXP reference schematics, the regulator output supplies the internal logic while the VDDX rail supplies the I/O drivers - both must be present for the MCU to start.
A common pitfall is omitting the PLL filter components. The MC9S12DJ128MFUE PLL requires a 0.1 uF capacitor on the XFC pin and a 1 nF capacitor on the VDDPLL pin, plus a series resistor on the PLL loop. According to the manufacturer datasheet, missing these components causes lock-detect failures and intermittent bus-clock jitter. Always include the reference-design PLL network exactly as specified.
Route the CANH and CANL differential pair with 100 ohm differential impedance, length-matched within 5 mm, and kept clear of switching signals. According to NXP application notes, the ground reference under the CAN pair must be unbroken to maintain signal integrity. Place the optional split-terminal termination at the connector end, not at the MCU end, to maximize DC bias stability.
Informations de conformité
RoHS and REACH compliance per NXP product page. AEC-Q100 qualified for automotive applications. Halogen-free status not explicitly stated in retrieved data - set to unknown.
