MCP3461RT-E/NC - 16-Bit 153.6 kSPS Delta-Sigma ADC | Microchip
N.º da peça: MCP3461RT-E/NC ✓ AtivoMCP3461RT-E/NC Visão geral
A delta-sigma ADC is a data-converter category that uses oversampling and digital filtering to trade conversion speed for high resolution and noise performance. Within the broader hierarchy, it is an ADC, then a data converter, then an analog and mixed-signal semiconductor. The MCP3461R family is designed for precision measurement systems where a compact converter, serial interface, and integrated support functions can reduce external component count.
Key features include 16-bit resolution, a maximum conversion rate of 153.6 kSPS, and a 97.2 dB signal-to-noise plus distortion ratio. The device integrates an internal voltage reference, internal oscillator, temperature sensor, burnout detector, and multiplexers. Its SPI interface provides a straightforward connection to microcontrollers and digital signal processors, while the integrated reference and oscillator help reduce the number of external precision components.
The converter uses a delta-sigma architecture to support low-noise measurements of slowly changing analog signals. A programmable data rate allows designers to balance conversion speed, output rate, and noise performance. The listed operating temperature range of -40 °C to +125 °C supports applications across industrial and automotive temperature ranges, while the R suffix identifies the integrated-reference version preferred for new designs.
Typical uses include industrial process-control loops, automotive pressure and position sensing, battery-management monitoring, temperature measurement, and low-bandwidth sensor acquisition. The SPI output is particularly useful where a compact controller-based measurement node is required. Systems can use the integrated temperature sensor for local diagnostics and the burnout detector to identify sensors or external circuitry operating outside expected limits.
Careful layout and filtering remain important because delta-sigma performance depends on a quiet analog supply, a clean digital interface, and well-controlled input settling. Place input, reference, and decoupling connections according to the pin-description table and layout guidance in the Microchip Technology MCP3461/2/4R family datasheet, and evaluate digital return currents so they do not pass through the analog input return path.
This product page combines the manufacturer specification summary, package and ordering information, pricing references, and practical replacement guidance. It also distinguishes the UQFN automotive-temperature ordering option from TSSOP-package family members that cannot replace this part without a PCB footprint change.
Alternativas drop-in para MCP3461RT-E/NC — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
MCP3461R-E/NC
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
MCP3461T-E/NC
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →MCP3461RT-E/NC Classificações máximas e características elétricas
| ADC Type | Delta-sigma ADC |
| Resolução | 16 bit |
| Maximum Data Rate | 153.6 kSPS |
| Analog Input Channels | 1 channel |
| Input Configuration | 2 single-ended or 1 differential input channel |
| Analog Supply Voltage | 2.7 V to 3.6 V |
| Digital Interface | SPI |
| Internal Reference | Integrated voltage reference |
| Internal Oscillator | Integrated oscillator |
| Temperature Sensor | Built-in temperature sensor |
| Burnout Detection | Built-in burnout sensor detection |
| Multiplexer | Integrated multiplexer |
| Signal-to-Noise Plus Distortion Ratio | 97.2 dB |
| Faixa de temperatura de operação | -40 °C to +125 °C |
| Encapsulamento | 20-pin UQFN, 3 mm x 3 mm |
| Tipo de montagem | Surface mount |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do MCP3461RT-E/NC 20-pin uqfn, 3 mm x 3 mm
Configuração de pinos para MCP3461RT-E/NC (pacote 20-pin uqfn, 3 mm x 3 mm). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para MCP3461RT-E/NC.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MCP3461RT-E/NC é adequado para 6 aplicaçãos: Industrial Pressure Sensing, Automotive Position Sensing, Battery Management Monitoring, Temperature Measurement, Sensor Condition Monitoring, Test and Measurement Equipment.
Industrial Pressure Sensing
The MCP3461RT-E/NC fits industrial pressure and process-sensor nodes that require 16-bit resolution at up to 153.6 kSPS. Its 97.2 dB SNR plus distortion ratio supports accurate conversion of slow bridge or conditioned sensor signals, while the integrated voltage reference and oscillator reduce dependence on external precision components. The SPI interface connects directly to a controller, and burnout detection helps identify failed sensor wiring. Because the converter is packaged in a 20-pin 3 mm by 3 mm UQFN, it also supports compact field-mounted acquisition boards.
Recomendado
Automotive Position Sensing
The MCP3461RT-E/NC is appropriate for automotive position and resistive-sensor interfaces operating from -40 °C to +125 °C. Its 16-bit conversion resolution and 153.6 kSPS maximum data rate provide useful margin for slowly changing steering, pedal, or throttle information. The built-in temperature sensor supports local diagnostics, while burnout detection can flag open or shorted sensor paths. The integrated reference and compact 20-pin UQFN package help reduce component count where board area is constrained.
Recomendado
Battery Management Monitoring
The MCP3461RT-E/NC can measure low-bandwidth battery-cell or pack signals through its single differential input or two single-ended inputs. A programmable rate up to 153.6 kSPS supports supervisory and balancing functions, while 16-bit resolution improves representation of small voltage changes. The integrated reference, multiplexers, and SPI interface simplify a compact measurement front end. Designers should still add the input filtering and protection appropriate for battery packs and follow the datasheet layout guidance to preserve converter performance.
Recomendado
Temperature Measurement
The MCP3461RT-E/NC supports precision temperature-acquisition systems with its 16-bit delta-sigma conversion core and built-in temperature sensor. The external analog input can measure a conditioned thermocouple, RTD, or temperature-sensor signal, while the internal sensor provides useful device-level diagnostics. A maximum output rate of 153.6 kSPS is suitable for many thermal-control loops, and the 2.7 V to 3.6 V supply range aligns with common 3.3 V embedded systems. The SPI interface enables periodic readings without continuous processor polling.
Recomendado
Sensor Condition Monitoring
The MCP3461RT-E/NC is well suited to diagnostics that verify resistive or bridge-based sensors over time. Its burnout detection circuitry can identify invalid sensor conditions, while the 16-bit resolution and 97.2 dB SNR plus distortion ratio provide a precise baseline for detecting gradual drift. The internal reference and oscillator support repeatable measurements, and the SPI interface allows a controller to log diagnostic data. In systems with multiple sensed quantities, the integrated multiplexer can help reduce measurement-node complexity.
Recomendado
Test and Measurement Equipment
The MCP3461RT-E/NC can serve as the measurement engine in compact instrumentation that converts low-bandwidth external signals for digital analysis. Its 16-bit resolution, programmable operation up to 153.6 kSPS, and integrated reference support laboratory-style data acquisition, while the SPI interface provides a direct path to a digital engine. The 3 mm by 3 mm UQFN package limits board footprint, and the -40 °C to +125 °C range supports industrial test equipment. Input protection and filtering remain external design responsibilities.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MCP3461RT-E/NC — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MCP3461R-E/NC | MCP3461T-E/NC |
|---|---|---|---|
| Package | 20-pin UQFN (3x3) | 20-pin UQFN (3x3) | 20-pin UQFN (3x3) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| ADC Architecture | Delta-sigma ADC | Delta-sigma ADC | Delta-sigma ADC |
| Resolution | 16 bit | 16 bit | 16 bit |
| Maximum Data Rate | 153.6 kSPS | 153.6 kSPS | 153.6 kSPS |
| Analog Supply Voltage | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Interface | SPI | SPI | SPI |
| Integrated Reference | Yes | Yes | Yes |
| Signal-to-Noise Plus Distortion Ratio | 97.2 dB | 97.2 dB | 97.2 dB |
Principais diferenciais
- Maintains the key conversion specifications of the preferred R-family architecture (vs MCP3461R-E/NC)
- Combines precision conversion with integrated diagnostics (vs MCP3461T-E/NC)
- Combines compact placement with multiple integrated support functions (vs MCP3461R-E/NC)
Notas de projeto
Route the analog input directly to the converter and place the manufacturer-recommended input and bypass capacitors at the associated package pins. Keep the SPI traces away from the analog input and reference paths, use a continuous ground reference where practical, and place the exposed pad connection according to the land pattern and thermal guidance in the MCP3461/2/4R family datasheet.
A delta-sigma ADC can suppress high-frequency noise, but the input must still settle correctly before conversion. Use the datasheet's input-capacitance and digital-filter timing information to select the source impedance and any external filtering. Excessive source impedance, long traces, or an incorrectly sized antialiasing network can increase conversion error even when the converter itself has adequate resolution.
Decouple the analog and digital supplies close to their pins using the capacitance and layout values specified by Microchip Technology. Keep switching-regulator and high-current return paths away from the reference and analog-input nodes. Verify startup and supply sequencing at the system level, particularly when the converter shares a rail with sensors, actuators, or communication equipment.
Do not substitute the ST suffix for the NC suffix without checking the package drawing: ST identifies a TSSOP configuration, whereas NC identifies the 20-pin 3 mm by 3 mm UQFN option. Also avoid confusing the original MCP3461 with MCP3461R because the R version adds the onboard voltage reference. Confirm the complete ordering code, pin table, temperature grade, and reel configuration before reuse.
Informações de conformidade
The component listing identifies the MCP3461RT-E/NC as RoHS compliant. The automotive-temperature grade is identified by ordering information, but explicit AEC-Q100 qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals declarations are not stated.