MCP3461RT-E/NC - 16-Bit 153.6 kSPS Delta-Sigma ADC | Microchip
MPN: MCP3461RT-E/NC ✓ 啟用中MCP3461RT-E/NC 概覽
A delta-sigma ADC is a data-converter category that uses oversampling and digital filtering to trade conversion speed for high resolution and noise performance. Within the broader hierarchy, it is an ADC, then a data converter, then an analog and mixed-signal semiconductor. The MCP3461R family is designed for precision measurement systems where a compact converter, serial interface, and integrated support functions can reduce external component count.
Key features include 16-bit resolution, a maximum conversion rate of 153.6 kSPS, and a 97.2 dB signal-to-noise plus distortion ratio. The device integrates an internal voltage reference, internal oscillator, temperature sensor, burnout detector, and multiplexers. Its SPI interface provides a straightforward connection to microcontrollers and digital signal processors, while the integrated reference and oscillator help reduce the number of external precision components.
The converter uses a delta-sigma architecture to support low-noise measurements of slowly changing analog signals. A programmable data rate allows designers to balance conversion speed, output rate, and noise performance. The listed operating temperature range of -40 °C to +125 °C supports applications across industrial and automotive temperature ranges, while the R suffix identifies the integrated-reference version preferred for new designs.
Typical uses include industrial process-control loops, automotive pressure and position sensing, battery-management monitoring, temperature measurement, and low-bandwidth sensor acquisition. The SPI output is particularly useful where a compact controller-based measurement node is required. Systems can use the integrated temperature sensor for local diagnostics and the burnout detector to identify sensors or external circuitry operating outside expected limits.
Careful layout and filtering remain important because delta-sigma performance depends on a quiet analog supply, a clean digital interface, and well-controlled input settling. Place input, reference, and decoupling connections according to the pin-description table and layout guidance in the Microchip Technology MCP3461/2/4R family datasheet, and evaluate digital return currents so they do not pass through the analog input return path.
This product page combines the manufacturer specification summary, package and ordering information, pricing references, and practical replacement guidance. It also distinguishes the UQFN automotive-temperature ordering option from TSSOP-package family members that cannot replace this part without a PCB footprint change.
直接替換替代品,適用於 MCP3461RT-E/NC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
MCP3461R-E/NC
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MCP3461T-E/NC
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MCP3461RT-E/NC 最大額定值與電氣特性
| ADC Type | Delta-sigma ADC |
| 解析度 | 16 bit |
| Maximum Data Rate | 153.6 kSPS |
| Analog Input Channels | 1 channel |
| Input Configuration | 2 single-ended or 1 differential input channel |
| Analog Supply Voltage | 2.7 V to 3.6 V |
| Digital Interface | SPI |
| Internal Reference | Integrated voltage reference |
| Internal Oscillator | Integrated oscillator |
| Temperature Sensor | Built-in temperature sensor |
| Burnout Detection | Built-in burnout sensor detection |
| Multiplexer | Integrated multiplexer |
| Signal-to-Noise Plus Distortion Ratio | 97.2 dB |
| 工作溫度範圍 | -40 °C to +125 °C |
| 封裝 | 20-pin UQFN, 3 mm x 3 mm |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Compliant |
MCP3461RT-E/NC 20-pin uqfn, 3 mm x 3 mm 腳位配置指南
MCP3461RT-E/NC(20-pin uqfn, 3 mm x 3 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: MCP3461RT-E/NC.
請參閱 資料表 以查看完整腳位配置。
典型應用
MCP3461RT-E/NC 適用於 6 應用s: Industrial Pressure Sensing, Automotive Position Sensing, Battery Management Monitoring, Temperature Measurement, Sensor Condition Monitoring, Test and Measurement Equipment.
Industrial Pressure Sensing
The MCP3461RT-E/NC fits industrial pressure and process-sensor nodes that require 16-bit resolution at up to 153.6 kSPS. Its 97.2 dB SNR plus distortion ratio supports accurate conversion of slow bridge or conditioned sensor signals, while the integrated voltage reference and oscillator reduce dependence on external precision components. The SPI interface connects directly to a controller, and burnout detection helps identify failed sensor wiring. Because the converter is packaged in a 20-pin 3 mm by 3 mm UQFN, it also supports compact field-mounted acquisition boards.
推薦
Automotive Position Sensing
The MCP3461RT-E/NC is appropriate for automotive position and resistive-sensor interfaces operating from -40 °C to +125 °C. Its 16-bit conversion resolution and 153.6 kSPS maximum data rate provide useful margin for slowly changing steering, pedal, or throttle information. The built-in temperature sensor supports local diagnostics, while burnout detection can flag open or shorted sensor paths. The integrated reference and compact 20-pin UQFN package help reduce component count where board area is constrained.
推薦
Battery Management Monitoring
The MCP3461RT-E/NC can measure low-bandwidth battery-cell or pack signals through its single differential input or two single-ended inputs. A programmable rate up to 153.6 kSPS supports supervisory and balancing functions, while 16-bit resolution improves representation of small voltage changes. The integrated reference, multiplexers, and SPI interface simplify a compact measurement front end. Designers should still add the input filtering and protection appropriate for battery packs and follow the datasheet layout guidance to preserve converter performance.
推薦
Temperature Measurement
The MCP3461RT-E/NC supports precision temperature-acquisition systems with its 16-bit delta-sigma conversion core and built-in temperature sensor. The external analog input can measure a conditioned thermocouple, RTD, or temperature-sensor signal, while the internal sensor provides useful device-level diagnostics. A maximum output rate of 153.6 kSPS is suitable for many thermal-control loops, and the 2.7 V to 3.6 V supply range aligns with common 3.3 V embedded systems. The SPI interface enables periodic readings without continuous processor polling.
推薦
Sensor Condition Monitoring
The MCP3461RT-E/NC is well suited to diagnostics that verify resistive or bridge-based sensors over time. Its burnout detection circuitry can identify invalid sensor conditions, while the 16-bit resolution and 97.2 dB SNR plus distortion ratio provide a precise baseline for detecting gradual drift. The internal reference and oscillator support repeatable measurements, and the SPI interface allows a controller to log diagnostic data. In systems with multiple sensed quantities, the integrated multiplexer can help reduce measurement-node complexity.
推薦
Test and Measurement Equipment
The MCP3461RT-E/NC can serve as the measurement engine in compact instrumentation that converts low-bandwidth external signals for digital analysis. Its 16-bit resolution, programmable operation up to 153.6 kSPS, and integrated reference support laboratory-style data acquisition, while the SPI interface provides a direct path to a digital engine. The 3 mm by 3 mm UQFN package limits board footprint, and the -40 °C to +125 °C range supports industrial test equipment. Input protection and filtering remain external design responsibilities.
推薦
推薦產品摘要
工程參考資料,適用於 MCP3461RT-E/NC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MCP3461R-E/NC | MCP3461T-E/NC |
|---|---|---|---|
| Package | 20-pin UQFN (3x3) | 20-pin UQFN (3x3) | 20-pin UQFN (3x3) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| ADC Architecture | Delta-sigma ADC | Delta-sigma ADC | Delta-sigma ADC |
| Resolution | 16 bit | 16 bit | 16 bit |
| Maximum Data Rate | 153.6 kSPS | 153.6 kSPS | 153.6 kSPS |
| Analog Supply Voltage | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Interface | SPI | SPI | SPI |
| Integrated Reference | Yes | Yes | Yes |
| Signal-to-Noise Plus Distortion Ratio | 97.2 dB | 97.2 dB | 97.2 dB |
主要差異化特點
- Maintains the key conversion specifications of the preferred R-family architecture (對比MCP3461R-E/NC)
- Combines precision conversion with integrated diagnostics (對比MCP3461T-E/NC)
- Combines compact placement with multiple integrated support functions (對比MCP3461R-E/NC)
設計說明
Route the analog input directly to the converter and place the manufacturer-recommended input and bypass capacitors at the associated package pins. Keep the SPI traces away from the analog input and reference paths, use a continuous ground reference where practical, and place the exposed pad connection according to the land pattern and thermal guidance in the MCP3461/2/4R family datasheet.
A delta-sigma ADC can suppress high-frequency noise, but the input must still settle correctly before conversion. Use the datasheet's input-capacitance and digital-filter timing information to select the source impedance and any external filtering. Excessive source impedance, long traces, or an incorrectly sized antialiasing network can increase conversion error even when the converter itself has adequate resolution.
Decouple the analog and digital supplies close to their pins using the capacitance and layout values specified by Microchip Technology. Keep switching-regulator and high-current return paths away from the reference and analog-input nodes. Verify startup and supply sequencing at the system level, particularly when the converter shares a rail with sensors, actuators, or communication equipment.
Do not substitute the ST suffix for the NC suffix without checking the package drawing: ST identifies a TSSOP configuration, whereas NC identifies the 20-pin 3 mm by 3 mm UQFN option. Also avoid confusing the original MCP3461 with MCP3461R because the R version adds the onboard voltage reference. Confirm the complete ordering code, pin table, temperature grade, and reel configuration before reuse.
合規資訊
The component listing identifies the MCP3461RT-E/NC as RoHS compliant. The automotive-temperature grade is identified by ordering information, but explicit AEC-Q100 qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals declarations are not stated.