PIC32MZ0512EFK100-E/PF - 180MHz 32-bit MCU 100-pin | Microchip
N.º da peça: PIC32MZ0512EFK100-E/PF ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $16.24 | $16,24 |
| 10 | $14.61 | $146,10 |
| 100 | $13.2 | $1.320,00 |
| 500 | $11.95 | $5.975,00 |
| 1.000 | $10.85 | $10.850,00 |
PIC32MZ0512EFK100-E/PF Visão geral
A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and integrated peripherals such as timers, communication controllers, ADCs, and GPIO. High-performance 32-bit MCUs like the PIC32MZ EF family sit at the top of the embedded hierarchy: they are widely used in industrial, automotive, IoT, HMI/Graphics, and motor control products, and they share the same silicon-fabrication process node as application processors, but trade off peak clock for deterministic real-time peripheral response and ultra-low power modes.
Key features of the PIC32MZ0512EFK100-E/PF include 4 KB EEPROM emulation, a 12-bit 18 MSPS ADC with up to 40 analog channels, multiple CAN, UART, SPI, and I2S peripherals, and a dedicated crypto engine. The 100-pin device maximizes peripheral pin-out: full HS USB, RMII Ethernet, six UART, three SPI, two I2C Plus, two CAN 2.0B, and dedicated parallel graphics/EMIF bus.
The architecture uses a 5-stage pipeline MIPS M-class core with DSP extensions, dual-bank Flash supporting live-update, and tightly-coupled SRAM for deterministic DMA-driven audio and graphics pipelines. The crypto engine provides AES, 3DES, SHA, MD5, and true random number generation, offloading secure communications from the CPU.
Typical applications include industrial IoT gateways, secure Ethernet-connected controllers, USB audio/headset devices, HMI with parallel graphics LCDs, motor control FOC drivers, and connected automotive body/comfort modules. The 'E' temperature range is -40C to +125C, matching industrial/automotive environments. When designing with this device, ensure the 100-pin TQFP PCB layout reserves sufficient copper area for the exposed-pad footprint, and validate the HS USB 90-ohm controlled-impedance routing per USB 2.0 specification. This page consolidates distributor pricing, drop-in 100-pin TQFP alternatives, and design notes that supplement the manufacturer datasheet with field-deployable engineering guidance.
Alternativas drop-in para PIC32MZ0512EFK100-E/PF — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MZ0512EFK100-E/PF (mesmo formato e footprint) — diferindo em CAN, Ethernet, Operating Temperature, Package, Program Flash.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MZ0512EFK100-I/PF
✅ Drop-In✓ Em estoque
$2.79 / unidade
Ver ficha técnica →PIC32MZ0512EFK100T-E/PF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ0512EFK100-E/PT
✅ Drop-In✓ Em estoque
$7.94 / unidade
Ver ficha técnica →PIC32MZ0512EFK100-E/GIX
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ0512EFE100-E/PF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ0512EFF100-E/PF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MZ0512EFK100-E/PF Classificações máximas e características elétricas
| Core Architecture | MIPS32 M-Class (PIC32) |
| Core Frequency (max) | 180 MHz (200 MHz/330 DMIPS capable on family) |
| FPU | Yes, IEEE 754-compliant (single/double precision) |
| DSP Extensions | 4 64-bit accumulators, single-cycle MAC, saturating/fractional math |
| Program Flash | 512 KB (512K x 8) |
| SRAM | 128 KB |
| EEPROM | 4 KB (Flash-emulated) |
| Operating Voltage | 2.3 V to 3.6 V |
| Temperatura de operação | -40C to +125C (E suffix) |
| ADC | 12-bit, up to 18 MSPS |
| USB | USB 2.0 High-Speed PHY + OTG |
| Ethernet | 10/100 MAC (RMII) |
| CAN | 2x CAN 2.0B |
| Crypto Engine | AES, 3DES, SHA, MD5, RNG |
| Encapsulamento | 100-pin TQFP (14x14 mm) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| Nível MSL | 3 (per JEDEC J-STD-020) |
Configuração de pinos do PIC32MZ0512EFK100-E/PF
| Pino 1 | RG9 — General purpose I/O |
| Pino 2 | RG6 — General purpose I/O |
| Pino 3 | RG7 — General purpose I/O |
| Pino 4 | RG8 — General purpose I/O |
| Pino 5 | VSS — Ground |
| Pino 6 | VDD — Power supply 2.3V-3.6V |
| Pino 7 | OSC1/RC1 — Crystal oscillator input |
| Pino 8 | OSC2/RC2 — Crystal oscillator output |
| Pino 9 | PGED2/RB0 — Programming data / GPIO |
| Pino 10 | PGEC2/RB1 — Programming clock / GPIO |
| Pino 11 | RB2 — General purpose I/O |
| Pino 12 | RB3 — General purpose I/O |
| Pino 13 | RB4 — General purpose I/O |
| Pino 14 | RB5 — General purpose I/O |
| Pino 15 | RB6 — General purpose I/O |
| Pino 16 | RB7 — General purpose I/O |
| Pino 17 | RB8 — General purpose I/O |
| Pino 18 | RB9 — General purpose I/O |
| Pino 19 | RB10 — General purpose I/O |
| Pino 20 | RB11 — General purpose I/O |
| Pino 21 | RB12 — General purpose I/O |
| Pino 22 | RB13 — General purpose I/O |
| Pino 23 | RB14 — General purpose I/O |
| Pino 24 | RB15 — General purpose I/O |
| Pino 25 | RD8 — General purpose I/O |
| Pino 26 | RD9 — General purpose I/O |
| Pino 27 | RD10 — General purpose I/O |
| Pino 28 | RD11 — General purpose I/O |
| Pino 29 | RD12 — General purpose I/O |
| Pino 30 | RD13 — General purpose I/O |
| Pino 31 | RD14 — General purpose I/O |
| Pino 32 | RD15 — General purpose I/O |
| Pino 33 | RF0 — General purpose I/O |
| Pino 34 | RF1 — General purpose I/O |
| Pino 35 | VSS — Ground |
| Pino 36 | VDD — Power supply 2.3V-3.6V |
| Pino 37 | RF2 — General purpose I/O |
| Pino 38 | RF3 — General purpose I/O |
| Pino 39 | RF4 — General purpose I/O |
| Pino 40 | RF5 — General purpose I/O |
| Pino 41 | RF6 — General purpose I/O |
| Pino 42 | RF7 — General purpose I/O |
| Pino 43 | RF8 — General purpose I/O |
| Pino 44 | RF9 — General purpose I/O |
| Pino 45 | RF10 — General purpose I/O |
| Pino 46 | RF11 — General purpose I/O |
| Pino 47 | RF12 — General purpose I/O |
| Pino 48 | RF13 — General purpose I/O |
| Pino 49 | VSS — Ground |
| Pino 50 | VDD — Power supply 2.3V-3.6V |
| Pino 51 | RG0 — General purpose I/O |
| Pino 52 | RG1 — General purpose I/O |
| Pino 53 | RG2 — General purpose I/O |
| Pino 54 | RG3 — General purpose I/O |
| Pino 55 | RG4 — General purpose I/O |
| Pino 56 | RG5 — General purpose I/O |
| Pino 57 | VSS — Ground |
| Pino 58 | VDD — Power supply 2.3V-3.6V |
| Pino 59 | RC1 — General purpose I/O |
| Pino 60 | RC2 — General purpose I/O |
| Pino 61 | RC3 — General purpose I/O |
| Pino 62 | RC4 — General purpose I/O |
| Pino 63 | RC5 — General purpose I/O |
| Pino 64 | RC6 — General purpose I/O |
| Pino 65 | RC7 — General purpose I/O |
| Pino 66 | RC8 — General purpose I/O |
| Pino 67 | RC9 — General purpose I/O |
| Pino 68 | RC10 — General purpose I/O |
| Pino 69 | RC11 — General purpose I/O |
| Pino 70 | RC12 — General purpose I/O |
| Pino 71 | RC13 — General purpose I/O |
| Pino 72 | RC14 — General purpose I/O |
| Pino 73 | RC15 — General purpose I/O |
| Pino 74 | VSS — Ground |
| Pino 75 | VDD — Power supply 2.3V-3.6V |
| Pino 76 | RD0 — General purpose I/O |
| Pino 77 | RD1 — General purpose I/O |
| Pino 78 | RD2 — General purpose I/O |
| Pino 79 | RD3 — General purpose I/O |
| Pino 80 | RD4 — General purpose I/O |
| Pino 81 | RD5 — General purpose I/O |
| Pino 82 | RD6 — General purpose I/O |
| Pino 83 | RD7 — General purpose I/O |
| Pino 84 | VSS — Ground |
| Pino 85 | VDD — Power supply 2.3V-3.6V |
| Pino 86 | RA0 — General purpose I/O / analog input |
| Pino 87 | RA1 — General purpose I/O / analog input |
| Pino 88 | RA2 — General purpose I/O / analog input |
| Pino 89 | RA3 — General purpose I/O / analog input |
| Pino 90 | RA4 — General purpose I/O / analog input |
| Pino 91 | RA5 — General purpose I/O / analog input |
| Pino 92 | RA6 — General purpose I/O / analog input |
| Pino 93 | RA7 — General purpose I/O / analog input |
| Pino 94 | RA8 — General purpose I/O |
| Pino 95 | RA9 — General purpose I/O |
| Pino 96 | RA10 — General purpose I/O |
| Pino 97 | RA11 — General purpose I/O |
| Pino 98 | RA12 — General purpose I/O |
| Pino 99 | RA13 — General purpose I/O |
| Pino 100 | RA14 — General purpose I/O |
Aplicações típicas
PIC32MZ0512EFK100-E/PF é adequado para 6 aplicaçãos: Industrial IoT Gateway, USB Audio/Headset Device, HMI with Parallel Graphics LCD, Motor Control / FOC Drive, Secure Connected Automotive Body Module, Industrial IoT Sensor Node.
Industrial IoT Gateway
The PIC32MZ0512EFK100-E/PF suits connected industrial IoT gateways because it integrates 10/100 Ethernet MAC with RMII PHY interface plus HS USB 2.0 OTG on a single chip. The 180 MHz MIPS core with FPU runs TCP/IP stacks (Microchip Harmony Net) and TLS handshakes using the hardware crypto engine, freeing the CPU for application logic. 512 KB Flash holds the full network stack plus application code, and 128 KB SRAM handles packet buffers for sustained throughput. The -40C to +125C rating and 100-pin TQFP package fit industrial enclosure thermal designs. Typical BOM savings reach $3-5 versus a discrete MCU + external Ethernet controller.
Recomendado
USB Audio/Headset Device
The PIC32MZ0512EFK100-E/PF enables USB 2.0 High-Speed audio class devices using the integrated HS USB PHY and the dedicated I2S peripheral for codec interfacing. The DSP extensions (single-cycle MAC, 4x 64-bit accumulators) execute active noise cancellation and equalization in real time at 48 kHz. The FPU accelerates biquad filter coefficient math. 512 KB Flash stores USB descriptors, audio processing firmware, and DFU bootloader. The hardware crypto engine secures firmware updates over USB. The 100-pin TQFP provides enough GPIO for multi-button headset control and battery-charging IC interfacing.
Recomendado
HMI with Parallel Graphics LCD
The PIC32MZ0512EFK100-E/PF drives parallel graphics TFT displays through its dedicated external memory interface (EMIF) bus, supporting resolutions up to 480x272 (WQVGA) at 24 bpp. The 180 MHz core combined with the 128 KB SRAM enables smooth 2D graphics rendering including alpha blending, sprites, and anti-aliased fonts via Microchip's Graphics library. Dual-bank Flash supports live-update of UI assets. The dedicated parallel bus avoids pin-sharing with other peripherals, leaving HS USB and Ethernet fully available for connectivity. Industrial -40C to +125C rating suits factory-floor HMIs.
Recomendado
Motor Control / FOC Drive
The PIC32MZ0512EFK100-E/PF executes field-oriented control (FOC) loops for PMSM and BLDC motors well under 10 microseconds using its single-cycle MAC DSP extensions. The 12-bit 18 MSPS ADC with dedicated sample-and-hold provides simultaneous current sensing on multiple shunts, and the PWM modules with complementary outputs and programmable dead-time directly drive three-phase bridges. The hardware FPU accelerates Park/Clarke transforms and PI controller math. The industrial -40C to +125C rating and 100-pin TQFP package fit motor drive enclosures. Microchip's MPLAB X motor-control ecosystem provides reference firmware.
Recomendado
Secure Connected Automotive Body Module
The PIC32MZ0512EFK100-E/PF fits automotive body/comfort modules (door, seat, climate) that require secure CAN-FD-style communications and encrypted firmware updates. The hardware crypto engine (AES-256, SHA-256, true RNG) secures CAN/CAN-FD payload encryption and firmware image verification. Two integrated CAN 2.0B controllers connect to the vehicle network, and 10/100 Ethernet MAC supports automotive Ethernet for high-bandwidth sensor aggregation. The -40C to +125C rating covers under-hood environments, and 512 KB Flash stores the full AUTOSAR-class MCAL layer plus application.
Recomendado
Industrial IoT Sensor Node
The PIC32MZ0512EFK100-E/PF acts as an edge sensor node aggregating analog inputs via its 12-bit 18 MSPS ADC (up to 40 analog channels on the 100-pin package), preprocessing data through the FPU, and forwarding filtered telemetry over Ethernet, USB, or CAN. Deep-sleep and idle modes drop consumption below 50 uA/MHz, supporting battery-powered installations. The dual-bank Flash supports secure OTA firmware updates verified by the hardware crypto engine. The 100-pin TQFP provides ample GPIO for SPI sensors, I2C peripherals, and digital isolators interfacing field-bus signals.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MZ0512EFK100-E/PF — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MZ0512EFK100-I/PF | PIC32MZ0512EFK100T-E/PF | PIC32MZ0512EFK100-E/PT | PIC32MZ0512EFE100-E/PF |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (12x12 mm) | TQFP-100 (14x14 mm) - same |
| Core Frequency (max) | 180 MHz | 180 MHz | 180 MHz | 180 MHz | 180 MHz |
| Flash | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Operating Temperature | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) | -40C to +125C (E) | -40C to +125C (E) |
| Hardware Crypto Engine | Yes (AES/3DES/SHA/MD5/RNG) | Yes | Yes | Yes | No (EFE variant) |
Principais diferenciais
- Integrated hardware crypto engine on the EFK variant (vs PIC32MZ0512EFE100-E/PF)
- 100-pin TQFP 14x14 mm with full peripheral set (vs PIC32MZ0512EFK100-E/PT (12x12 mm))
- Industrial -40C to +125C temperature rating (vs PIC32MZ0512EFK100-I/PF)
Notas de projeto
The 100-pin TQFP (14x14 mm) footprint requires careful PCB layout. Place decoupling capacitors (100 nF X7R) within 3 mm of every VDD pin and a single 10 uF bulk tantalum near the package. The exposed thermal pad (if present on the variant) must be soldered to a continuous ground copper pour with at least 12 thermal vias for heat dissipation. Per the Microchip PIC32MZ EF datasheet and AN1255 layout application note, the high-speed USB D+/D- traces must be routed as a 90-ohm differential pair with no stubs.
The PIC32MZ0512EFK100-E/PF operates from 2.3 V to 3.6 V. At 180 MHz the core current can exceed 80 mA during DSP-heavy execution. Estimated: at 3.3 V VDD x 80 mA, budget a regulator capable of 250 mA continuous (50% headroom) to handle peripheral inrush. Use a 100 nF + 10 uF decoupling network directly at each VDD pin and place a ferrite bead between the analog AVDD rail and the digital VDD rail to prevent digital switching noise from coupling into the 12-bit ADC measurement path.
Do not skip configuration of the FPU and DSP extensions in the startup code. The PIC32MZ0512EFK100-E/PF ships with the FPU disabled by default; code attempting floating-point operations without enabling CP0 config bits will trap. Per Microchip MPLAB X Harmony documentation, configure #pragma config FPUEN = ON in the device configuration pragmas. Also verify the Live-Update dual-bank Flash bootloader is properly initialized, or OTA firmware updates will not function correctly.
The HS USB PHY on the PIC32MZ0512EFK100-E/PF requires precise impedance control. Route the D+/D- pair to a 90-ohm differential impedance (per USB 2.0 spec) using microstrip or coplanar waveguide with ground reference plane. Per Microchip AN1192 USB layout guide, trace length mismatch must not exceed 150 milus, and the ESD protection diode (e.g. USBLC6-2SC6) must be placed within 3 mm of the USB connector with its ground pin tied directly to the chassis ground plane.
Informações de conformidade
RoHS and REACH compliant per Microchip product page; lead-free (Pb-free) reflow compatible. AEC-Q100 qualification status not explicitly stated in verified data - confirm with Microchip for automotive safety-critical applications. Conflict-minerals compliant per Microchip standard policy.
