SP3232EBEP-L - 250kbps RS-232 Transceiver | MaxLinear
N.º da peça: SP3232EBEP-L ✓ AtivoSP3232EBEP-L Visão geral
An RS-232 transceiver is an interface IC that translates between complementary logic-level signals used by digital equipment and the positive and negative voltage levels used by RS-232 links. The SP3232EB belongs to the broader interface IC hierarchy, where it sits between a host controller or UART and an external serial connector. This integration reduces the number of external level-shifting and charge-pump components required in compact portable equipment.
Key features include a 2/2 transceiver arrangement, true RS-232 operation from +3.0V to +5.5V, and a maximum data rate of 250kbps when fully loaded. The high-efficiency on-board charge pump produces approximately ±5.5V from one supply. This makes the device applicable to 3.3V-only, mixed 3.3V-to-5.5V, and 5.0V-only systems. The device is intended specifically for portable and hand-held equipment such as notebook and laptop computers.
The SP3232EB family combines charge-pump generation, RS-232 drivers, and RS-232 receivers in one package. Its dual-channel architecture allows two serial data paths to be implemented without duplicating the interface circuitry. The 16-pin PDIP package also supports conventional through-hole PCB assembly and prototyping. Because RS-232 is a single-ended, bipolar interface, correct grounding, cable routing, and protection remain important in systems exposed to electrostatic discharge or long cables.
Typical uses include portable computer serial ports, industrial control links, embedded equipment, point-of-sale terminals, and service interfaces. The device is particularly useful when the system logic operates at 3.3V but the attached peripheral requires true RS-232 signal levels. Its 250kbps capability is suitable for moderate-speed data transfer while consuming less board area than a discrete driver and receiver implementation.
Designers should place the required charge-pump capacitors close to their associated pins and provide the input and output bypassing specified by the manufacturer datasheet. Keep protected RS-232 traces away from sensitive clock, audio, and sensor paths. Confirm connector pin assignments and logic polarity during system integration, since transmitter and receiver signal inversions can differ from UART logic conventions.
This product page combines manufacturer specifications, application guidance, package details, and verified drop-in replacement information to support faster component selection. It also distinguishes electrically similar devices from replacements that are truly pin-compatible, helping engineers preserve the existing 16-pin PDIP footprint and validate interface behavior before releasing a new board.
Alternativas drop-in para SP3232EBEP-L — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com SP3232EBEP-L (mesmo formato e footprint) — diferindo em Charge-Pump Capacitor Requirement, Package, Mounting Type, Product Type, Maximum Data Rate.
SP3232EBEP
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SP3232EEA-L
✅ Drop-InConsulte o preço
Ver ficha técnica →SP3232EUEA-L/TR
✅ Drop-InConsulte o preço
Ver ficha técnica →SP3232EBEP-L Especificações
| Product Type | RS-232 transceiver IC |
| Number of Transmitters | 2 |
| Number of Receivers | 2 |
| Supply Voltage Range | +3.0V to +5.5V |
| Maximum Data Rate | 250kbps |
| Charge-Pump Output | ±5.5V |
| Charge-Pump Capacitor Requirement | 0.1uF in 3.3V operation |
| Transceiver Configuration | 2/2 full RS-232 |
| Encapsulamento | 16-pin PDIP |
| Tipo de montagem | Through-hole |
| Power-Supply Architecture | On-board charge-pump supply |
| Supported Logic Supply | 3.3V and 5.0V systems |
Guia de Configuração de Pinos do SP3232EBEP-L 16-pin pdip
Configuração de pinos para SP3232EBEP-L (pacote 16-pin pdip). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para SP3232EBEP-L.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
SP3232EBEP-L é adequado para 6 aplicaçãos: Portable Computer Serial Interface, Industrial Serial Control Link, Point-of-Sale Terminal Interface, Embedded Equipment Service Port, Data Acquisition and Test Equipment, Network and Communication Equipment.
Portable Computer Serial Interface
The SP3232EBEP-L fits a portable or hand-held computer that needs a true RS-232 port while operating from a 3.3V logic supply. Its integrated charge pump generates approximately ±5.5V from +3.0V to +5.5V and requires only 0.1uF capacitors in 3.3V operation, reducing external power circuitry. Two transmitters and two receivers support two serial paths through the 16-pin PDIP interface. The 250kbps rate is appropriate for moderate-speed peripheral communication, while the through-hole package simplifies prototype assembly and repair.
Recomendado
Industrial Serial Control Link
The SP3232EBEP-L can bridge a 3.3V or 5V controller to equipment that requires true RS-232 levels. Its two-channel transceiver arrangement provides dedicated transmit and receive paths, while the integrated charge pump avoids a separate negative-voltage supply. At rates up to 250kbps, it is suitable for configuration links, service ports, and moderate-speed equipment control. Designers should assess cable length, grounding, and connector protection because the transceiver rating alone does not define the complete industrial-port withstand rating.
Recomendado
Point-of-Sale Terminal Interface
A point-of-sale terminal or peripheral using RS-232 can benefit from the SP3232EBEP-L because the transceiver supports both 3.3V-only and 5.0V-only systems. The single-supply charge pump supplies the bipolar RS-232 levels, while the 0.1uF 3.3V capacitor requirement helps conserve board area. Two transmitters and two receivers allow compact multi-port designs. The 250kbps rate is suitable for transaction peripherals that exchange commands and short data records rather than continuous high-bandwidth streams.
Recomendado
Embedded Equipment Service Port
The SP3232EBEP-L is useful for manufacturing and field-service access on embedded equipment that retains a legacy RS-232 console. A 3.3V system can obtain true RS-232 levels without adding a negative rail, and the 16-pin PDIP package is convenient for through-hole service boards. The dual transmitter and dual receiver arrangement supports two channels. Keep the port disabled or appropriately configured when unused, and verify connector wiring against the datasheet pin table to avoid logic-polarity errors during maintenance.
Recomendado
Data Acquisition and Test Equipment
The SP3232EBEP-L can serve as the RS-232 interface in data-acquisition and test equipment that uses a 3.3V controller but must communicate with a true RS-232 instrument. The integrated charge pump provides approximately ±5.5V output levels, and the maximum 250kbps rate supports moderate-speed command and result transfers. Use controlled grounding and short, shielded cabling where appropriate. The 16-pin PDIP package is also practical for instrument-control boards that favor conventional through-hole assembly.
Recomendado
Network and Communication Equipment
The SP3232EBEP-L can provide legacy RS-232 connectivity in network or communication equipment with a modern 3.3V supply. Its two transmitters and two receivers support independent RS-232 channels, and the integrated charge pump simplifies system power design by avoiding a separate negative supply. The 250kbps capability is adequate for management interfaces and low-rate data links. Designers should separate the RS-232 routing from Ethernet or radio sections to prevent charge-pump noise and cable transients from affecting sensitive circuitry.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para SP3232EBEP-L — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | SP3232EBEP | SP3232EEA-L | SP3232EUEA-L |
|---|---|---|---|---|
| Brand | MaxLinear | MaxLinear | MaxLinear | MaxLinear |
| Package | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP |
| Device Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Number of Transmitters | 2 | 2 | 2 | 2 |
| Number of Receivers | 2 | 2 | 2 | 2 |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole |
Principais diferenciais
- True RS-232 operation from a modern 3.3V supply (vs SP3232EBEP)
- Compact integrated charge-pump implementation (vs SP3232EEA-L)
- Two-channel RS-232 interface in a 16-pin PDIP (vs SP3232EUEA-L)
Notas de projeto
Place the 0.1uF charge-pump capacitors close to the pins and capacitor connections identified in the manufacturer datasheet. Keep these high-current switched paths compact and away from UART, crystal, analog, and sensor traces. Use the manufacturer layout as the starting point, and verify the physical pin numbering against the 16-pin PDIP footprint before fabrication.
Decouple the supply near the device with the capacitance and connection arrangement specified in the datasheet. The SP3232EBEP-L can operate from +3.0V to +5.5V and produces approximately ±5.5V through its charge pump. Do not power the RS-232 interface from a rail that can exceed +5.5V, and include local bulk capacitance where the source impedance could otherwise disturb the charge pump.
Confirm transmit and receive logic polarity against the UART and connector schematic; RS-232 transmitter inputs and receiver outputs are not always identified using the same active-level convention as the host logic. Also verify whether the unused driver input and receiver output must be left unconnected or biased according to the manufacturer pin table. Avoid selecting a replacement solely by the 16-pin outline.
Route RS-232 traces away from clocks, reset lines, sensitive analog inputs, and other high-impedance nodes. For external cables, use the shortest practical ground reference and consider connector-side transient protection. The IC's 250kbps capability is a device rating, while usable cable distance also depends on baud rate, capacitance, loading, shielding, and the grounding arrangement.
Informações de conformidade
The manufacturer datasheet confirms the electrical and package family characteristics, but the available product information does not explicitly establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this exact ordering code.