XC7A75T-1CSG324I - 75,520-Cell Artix-7 FPGA | AMD
N.º da peça: XC7A75T-1CSG324I ✓ AtivoXC7A75T-1CSG324I Visão geral
An FPGA is a configurable semiconductor containing programmable logic blocks, routing networks, memory, and dedicated processing resources. Within the semiconductor hierarchy, the XC7A75T belongs to the Artix-7 family of 7 series FPGAs, a low-power platform positioned below Kintex-7 and Virtex-7 devices. Its combination of logic density, signal-processing capability, and package size supports embedded systems that need parallel processing without a large discrete processor or custom ASIC.
Key features include 75,520 logic cells and 210 available I/Os in the CSG324 package. The -1 performance designation identifies its speed grade, while the industrial suffix supports operation from -40°C to +100°C. The device is manufactured on a 28 nm CMOS process according to the family comparison data, providing a modern balance of switching performance, power efficiency, and integration. Its 1 V operating class is relevant to core-rail and I/O planning.
The Artix-7 architecture supports parallel logic operations, DSP processing, embedded memory, and mixed-signal functions. This makes the XC7A75T suitable for deterministic control, image processing, sensor aggregation, communication preprocessing, and programmable logic accelerators. Designers can consolidate multiple fixed-function peripherals into one device, shorten development cycles, and update field behavior by reconfiguring the FPGA bitstream.
Typical uses include industrial automation and PLC logic, motor-control systems, machine-vision preprocessing, sensor-fusion nodes, video processing, and software-defined radio equipment. Its 210 I/Os provide interfaces for control signals, memory, communications, and high-speed parallel data. For designs requiring bonded high-speed transceivers, however, the package choice must be checked because CSG324 does not provide the same transceiver access as FGG484.
PCB design should follow AMD package drawings and the CSG324 pinout files. Decoupling, power-plane integrity, ball-grid-array assembly, thermal management, and I/O voltage selection are critical. Because this is a BGA device, adequate via access beneath the device and process-specific assembly controls are necessary for reliable manufacturing.
This page combines the verified device identity, package information, operating limits, comparison data, application guidance, and practical migration considerations in one engineering-focused reference. It also highlights the distinction between electrically related Artix-7 options and a genuine pin-for-pin replacement, helping designers avoid assuming that similar family membership guarantees interchangeability.
Alternativas drop-in para XC7A75T-1CSG324I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC7A75T-1CSG324I (mesmo formato e footprint) — diferindo em Package, Logic Cells, Mounting Type, Speed Grade, Device Type.
XC7A75T-1CSG324C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC7A75T-L1CSG324I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC7A100T-1CSG324C
✅ Drop-In✗ Fora de estoque
$59.9 / unidade
Ver ficha técnica →XC7A100T-1CSG324I
✅ Drop-In✗ Fora de estoque
$59.9 / unidade
Ver ficha técnica →XC7A100T-L1CSG324I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC7A75T-1CSG324I Classificações máximas e características elétricas
| Device Type | Artix-7 field-programmable gate array |
| Logic Cells | 75,520 cells |
| User I/O | 210 I/Os |
| Encapsulamento | 324-terminal CSPBGA |
| Package Type | 324-LFBGA |
| Package Dimensions | 15 mm × 15 mm |
| Ball Pitch | 0.8 mm |
| Faixa de temperatura de operação | -40°C to +100°C |
| Speed Grade | -1 |
| Technology Process | 28 nm CMOS |
| Operating Voltage Class | 1 V |
| Tipo de montagem | Surface-mount ball grid array |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Guia de Configuração de Pinos do XC7A75T-1CSG324I 15 mm × 15 mm
Configuração de pinos para XC7A75T-1CSG324I (pacote 15 mm × 15 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC7A75T-1CSG324I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC7A75T-1CSG324I é adequado para 6 aplicaçãos: Industrial Automation and PLC Control, Motor Control and Power Electronics, Machine Vision and Image Preprocessing, Sensor Fusion and Industrial IoT, Software-Defined Radio, Video Processing and Display Interfaces.
Industrial Automation and PLC Control
The XC7A75T-1CSG324I fits industrial PLC and automation controllers because its 75,520 logic cells can implement parallel sequencing, interlocks, counters, communications bridges, and machine-control logic in one programmable device. Its 210 user I/Os provide connections for sensors, actuators, encoders, and discrete control signals, while the -40°C to +100°C range supports temperature-controlled factory equipment. Parallel hardware execution can reduce interrupt overhead and improve deterministic control-loop timing compared with a general-purpose processor approach. Engineers should allocate pins and levels through the CSG324 package files and validate timing, power, and I/O standards for the specific machine.
Recomendado
Motor Control and Power Electronics
The XC7A75T-1CSG324I is suitable for digital motor-control front ends where deterministic pulse generation, current sampling, fault handling, and supervisory logic must operate concurrently. Its 75,520 logic cells and 210 I/Os support encoder interfaces, gate-driver control, protection status inputs, and communication with a host controller. Parallel execution allows the FPGA to sample multiple control signals and update outputs without relying on software scheduling. The CSG324 package supports compact industrial designs, but engineers must review voltage tolerances and edge rates against external power-device requirements. A heat-spreader and careful plane design may be needed where switching losses drive high FPGA activity.
Recomendado
Machine Vision and Image Preprocessing
The XC7A75T-1CSG324I can implement parallel image-preprocessing pipelines for industrial machine vision, including pixel classification, thresholding, morphology, line detection, and sensor-format conversion. Parallel fabric operations distribute across programmable logic and DSP resources, enabling predictable throughput without a software-only bottleneck. Its 210 I/Os are valuable for camera interfaces, capture timing, and coordination with downstream image-processing hardware. The device should be paired with a sensor whose supported data rates match the selected I/O standards and board-level timing budget. Designers should use AMD's package files to assign banks correctly and should verify whether the CSG324 package exposes every high-speed interface required by the camera link.
Recomendado
Sensor Fusion and Industrial IoT
The XC7A75T-1CSG324I fits industrial IoT edge nodes that must combine data from multiple sensors before network transmission. Its 75,520 logic cells can normalize inputs, maintain time alignment, perform filtering, and execute protocol conversion concurrently, while 210 I/Os accommodate digital sensors, status indicators, and communications peripherals. The -40°C to +100°C industrial range supports deployment near machinery and process equipment. Configurable logic also allows firmware-like updates when sensing requirements change. Designers should partition deterministic acquisition from less critical networking tasks, use the recommended decoupling network, and validate watchdog and recovery behavior so communications faults cannot compromise safety-related acquisition.
Recomendado
Software-Defined Radio
The XC7A75T-1CSG324I can support software-defined radio workloads that perform digital filtering, modulation, demodulation, packet processing, or waveform generation in parallel. The Artix-7 architecture combines programmable logic with DSP resources, allowing a compact implementation of digital signal-processing chains and control functions. However, the CSG324 package does not expose the same bonded transceiver access as FGG484, so the design must use an external radio-frequency transceiver or another accessible interface. The 210 I/Os are suitable for parallel data, clocks, configuration, and control paths. Engineers should verify clocking resources, supported I/O standards, memory interfaces, and the timing margin required by the selected sample rate.
Recomendado
Video Processing and Display Interfaces
The XC7A75T-1CSG324I supports compact video-processing modules that combine pixel timing, color conversion, scaling, overlay, test-pattern generation, and interface control. Its 75,520 logic cells allow parallel datapaths to operate concurrently, and the 210 I/Os provide sufficient connectivity for low-resolution or multi-format video pipelines. The industrial temperature range is useful in factory inspection, monitoring, and embedded display equipment. Engineers should match external display interfaces to supported I/O standards, account for synchronization and clock-generation resources, and avoid assuming that CSG324 has the same high-speed transceiver access as larger Artix-7 packages. Timing closure and memory bandwidth should be verified before committing to a particular video resolution.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC7A75T-1CSG324I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC7A75T-1CSG324C | XC7A75T-L1CSG324I | XC7A100T-1CSG324C | XC7A100T-1CSG324I | XC7A100T-L1CSG324I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-terminal CSPBGA | 324-terminal CSPBGA | 324-terminal CSPBGA | 324-terminal CSPBGA | 324-terminal CSPBGA | 324-terminal CSPBGA |
| Logic Cells | 75,520 cells | 75,520 cells | 75,520 cells | 101,440 cells | 101,440 cells | 101,440 cells |
| Speed Grade | -1 | -1 | -L | -1 | -1 | -L |
Principais diferenciais
- Industrial temperature coverage (vs XC7A75T-1CSG324C)
- Same-density footprint retention (vs XC7A75T-L1CSG324I)
- Direct speed-grade continuity (vs XC7A100T-1CSG324C)
Notas de projeto
Assign the CSG324 BGA exclusively from AMD's package pinout files for XC7A75T-1CSG324I, not from a generic CSG324 drawing used for another density. Confirm every bank, power ball, configuration pin, and user I/O against the package-combo table. Place decoupling capacitors close to their assigned supply balls and provide uninterrupted return paths beneath high-speed nets. Because the package uses a 0.8 mm ball pitch in a 15 mm × 15 mm outline, escape-routing and via-in-pad choices should be evaluated against the board-builder's assembly capability before layout release.
Build the power tree from the device-specific AMD data sheet rather than assuming that every XC7A75T CSG324 variant has identical supply pins. Verify core, auxiliary, bank, and I/O voltage requirements, startup sequencing, current limits, and decoupling values for the selected ordering code. If the design changes to XC7A100T-L1CSG324I, re-evaluate the stated 0.95 V operating class against the 1 V class of XC7A75T-1CSG324I; do not copy regulators, bias resistors, or sequencing settings without checking the replacement device.
Estimate FPGA junction temperature from actual fabric activity, I/O loading, core voltage, and the PCB thermal path rather than using a nominal room-temperature assumption. Estimated: power dissipation equals the sum of core and I/O power; junction rise equals that dissipation multiplied by the effective board-level thermal resistance. Add the resulting rise to the maximum ambient temperature and compare it with the device limit. For compact industrial products, use exposed-package copper, controlled airflow, and thermal vias that follow assembly and reliability requirements.
Do not treat Artix-7 family membership as proof of interchangeability. The CSG324 package may not expose the high-speed transceiver resources available in FGG484, and related Artix-7 densities can differ in bonded user I/Os, configuration behavior, power requirements, and timing margin. Before approving a replacement, compare the AMD package-combo table, device data sheet, pinout file, bitstream constraints, and timing report. A PCB may accept the same footprint while still requiring schematic, firmware, and placement changes.
Informações de conformidade
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. The industrial temperature suffix and -1 speed grade describe environmental and performance grades, not an automotive qualification.