XC7Z020-1CLG484CES - 85K Logic Cell Zynq SoC | AMD
N.º da peça: XC7Z020-1CLG484CES ✓ AtivoXC7Z020-1CLG484CES Visão geral
A Zynq system-on-chip is a heterogeneous embedded platform that combines an ARM microprocessor system with an FPGA fabric, memory controllers, and high-speed programmable I/O. It belongs to the FPGA and CPLD category while also functioning as a processor-based SoC. This architecture allows hardware acceleration, parallel control, interface adaptation, and software-controlled application processing to share one package and interconnect.
The target MPN provides 85K logic cells, 667 MHz processor performance, dual ARM Cortex-A9 cores, and CoreSight debugging in the CLG484 package. Its integrated processor supports programmable real-time I/O alongside the FPGA fabric, making the device useful for demanding control systems rather than simple fixed-function logic. The CLG484 package offers substantially more balls than smaller Zynq packages, supporting a broader set of programmable I/O and power connections.
The Zynq-7000 architecture separates the processing system from the programmable logic while allowing shared access to DDR memory and peripherals. This separation supports hard real-time control tasks in hardware while the ARM processor handles operating systems, networking, data processing, and user applications. Exact resource counts, memory capacity, voltage requirements, and package dimensions beyond those identified for this device should be confirmed in AMD data sheet DS187 before final design release.
Typical uses include industrial Ethernet gateways, machine vision, industrial automation, embedded networking, camera processing, communications equipment, and test systems. The 667 MHz dual-core processor provides useful control bandwidth, while 85K logic cells allow parallel datapaths, protocol bridges, and hardware accelerators to be implemented alongside software. In a camera system, for example, programmable logic can perform image pre-processing before the ARM subsystem handles network management or higher-level analysis.
PCB implementation requires careful treatment of the 484-ball BGA footprint, power sequencing, decoupling, and high-speed routing. Confirm the complete ball map, voltage rails, and differential I/O constraints from the AMD package pinout files and DS187. Treat the processor, memory interface, and programmable I/O requirements as separate design domains so each rail, reference plane, and high-speed route is validated for its intended signal class.
This product summary combines the verified device identity, package information, processor configuration, and architectural role with engineering guidance for evaluating the XC7Z020-1CLG484CES in embedded FPGA, industrial, networking, and machine-vision systems. It also distinguishes the device from speed- and temperature-code variants while preserving the strict CLG484 footprint requirement for drop-in comparisons.
Alternativas drop-in para XC7Z020-1CLG484CES — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC7Z020-1CLG484CES (mesmo formato e footprint) — diferindo em Mounting Type, Logic Cells, Package, FPGA Family, Device Type.
XC7Z020-1CLG484C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7Z020-1CLG484I
✅ Drop-In✓ Em estoque
$45.9375 / unidade
Ver ficha técnica →XC7Z020-2CLG484C
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC7Z020-2CLG484I
✅ Drop-In✓ Em estoque
$49 / unidade
Ver ficha técnica →XC7Z020-3CLG484I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC7Z020-1CLG484CES Classificações máximas e características elétricas
| Device Type | Zynq-7000 Artix-7 FPGA SoC |
| Architecture | Dual-core heterogeneous ARM Cortex-A9 MPCore and FPGA SoC |
| Processor Core | 2 x ARM Cortex-A9 |
| Maximum Processor Frequency | 667 MHz |
| Logic Cells | 85K |
| On-Chip Memory | 256 KB |
| Debug Support | CoreSight |
| Package Type | 484-CSPBGA |
| Package Dimensions | 19 mm x 19 mm |
| Ball Count | 484 balls |
| Tipo de montagem | Surface-mount BGA |
| Device Family | Zynq-7000 |
| FPGA Family | Artix-7 |
| Temperature Grade Code | Extended-temperature code E |
| Speed Grade Code | 1 |
Guia de Configuração de Pinos do XC7Z020-1CLG484CES 19 mm x 19 mm
Configuração de pinos para XC7Z020-1CLG484CES (pacote 19 mm x 19 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC7Z020-1CLG484CES.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC7Z020-1CLG484CES é adequado para 6 aplicaçãos: Industrial Automation Controller, Industrial Ethernet Gateway, Machine-Vision Image Processor, Camera and Video Edge Device, Communications Protocol Bridge, Test and Measurement Instrument.
Industrial Automation Controller
The XC7Z020-1CLG484CES fits industrial automation systems that need both deterministic hardware control and a higher-level operating system. Its dual ARM Cortex-A9 cores can run up to 667 MHz for communications, diagnostics, and sequencing, while 85K logic cells can implement motor-control timing, encoder capture, I/O expansion, and fault handling in parallel. The CLG484 package provides a large I/O ball array for isolated digital interfaces, industrial Ethernet, and external memory. Designers should partition time-critical functions into the programmable logic and reserve the processor subsystem for supervisory control. Power sequencing, ground-plane continuity, and high-speed differential routing must follow the CLG484 reference design.
Recomendado
Industrial Ethernet Gateway
The XC7Z020-1CLG484CES can serve as an embedded networking gateway when a design combines protocol software with hardware-assisted packet handling. The ARM subsystem provides up to 667 MHz of processing capacity for routing, management interfaces, and application protocols, while the 85K logic-cell fabric can accelerate framing, checksums, filtering, or interface bridging. Its 484-CSPBGA package supports the numerous power and I/O connections expected in a multi-interface gateway. Select PHY and magnetics according to the required Ethernet rates and isolation targets. Validate signal integrity, reference-clock routing, power integrity, and external DDR topology against the selected AMD device and board constraints.
Recomendado
Machine-Vision Image Processor
The XC7Z020-1CLG484CES is well matched to machine-vision controllers that separate high-throughput pixel operations from higher-level image analysis. Programmable logic can perform capture formatting, thresholding, line scan, color conversion, or filtering at line rate, while the dual-core ARM processor manages image buffers, configuration, diagnostics, and communication. With 85K logic cells, the design can combine multiple image-processing blocks instead of relying exclusively on software. The CLG484 footprint exposes a substantial I/O and memory interface, but camera timing, sensor data rates, and external memory bandwidth must be evaluated early. Use controlled impedance routing and solid ground planes for high-speed sensor and memory links.
Recomendado
Camera and Video Edge Device
The XC7Z020-1CLG484CES supports edge camera systems that need local image processing without sending every frame to a remote processor. The 667 MHz ARM subsystem can run control software and network services, while the FPGA fabric can compress, crop, filter, or frame video data in parallel. This division of labor reduces the processing load reaching memory and software while maintaining deterministic latency. The 19 mm by 19 mm 484-CSPBGA package also supports external DDR and multiple sensor or network interfaces when the board and power design can accommodate them. Designers should establish sensor clocking, video standards, memory bandwidth, and thermal conditions before assigning functions to logic or software.
Recomendado
Communications Protocol Bridge
The XC7Z020-1CLG484CES can implement a communications bridge that combines software protocol management with dedicated hardware conversion. The processor subsystem handles configuration, routing tables, diagnostics, and non-deterministic protocol tasks, while the programmable logic can adapt bus widths, buffer data, detect framing errors, or execute fixed timing sequences. Its 85K logic cells allow several narrow interfaces and accelerator blocks to coexist. The CLG484 package offers many I/O balls, although every interface consumes routing and power resources that must be checked for the exact design. Use the AMD package pinout files to confirm bank assignments and implement each interface with the prescribed voltage, impedance, and decoupling requirements.
Recomendado
Test and Measurement Instrument
The XC7Z020-1CLG484CES is applicable to compact test and measurement equipment that benefits from deterministic acquisition and flexible control. FPGA logic can manage counters, capture timing, trigger logic, and data packing while the dual-core ARM subsystem executes control software, calibration, and communications. The combination can reduce reliance on external fixed-function logic and allows acquisition pipelines to be adapted for multiple test formats. Its 85K logic cells and 667 MHz processor provide substantial processing headroom, but the design must account for memory bandwidth, clock-jitter limits, analog-interface isolation, and thermal dissipation. Separate noisy analog circuitry from high-speed digital routing and follow the manufacturer reference layout.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC7Z020-1CLG484CES — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC7Z020-1CLG484C | XC7Z020-1CLG484I | XC7Z020-2CLG484C | XC7Z020-2CLG484I | XC7Z020-3CLG484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-CSPBGA (19 mm x 19 mm) | 484-CSPBGA (19 mm x 19 mm) | 484-CSPBGA (19 mm x 19 mm) | 484-CSPBGA (19 mm x 19 mm) | 484-CSPBGA (19 mm x 19 mm) | 484-CSPBGA (19 mm x 19 mm) |
| Device Family | Zynq-7000 Artix-7 | Zynq-7000 Artix-7 | Zynq-7000 Artix-7 | Zynq-7000 Artix-7 | Zynq-7000 Artix-7 | Zynq-7000 Artix-7 |
| Logic Cells | 85K | 85K | 85K | 85K | 85K | 85K |
| Speed Grade Code | 1 | 1 | 1 | 2 | 2 | 3 |
| Temperature Code | E | C | I | C | I | I |
Principais diferenciais
- Combines an 85K-logic-cell FPGA with a 667 MHz dual-core ARM subsystem (vs XC7Z020-1CLG484C)
- Uses the established CLG484 footprint for direct family-level migration (vs XC7Z020-1CLG484I)
- Retains 85K logic cells across speed-grade alternatives (vs XC7Z020-2CLG484C)
- Provides CoreSight debugging in the same heterogeneous SoC (vs XC7Z020-3CLG484I)
Notas de projeto
Implement the processing-system, programmable-logic, I/O, and auxiliary supplies as separate power domains and follow the decoupling and sequencing requirements in AMD data sheet DS187. Place the required bypass capacitors close to the associated CLG484 power balls with short return paths into the ground plane. Do not combine rails merely because they share a package; their voltage, tolerance, startup order, and current limits must be validated independently.
Use the official AMD CLG484 package pinout files for land patterns and ball assignments before routing the board. Preserve the BGA escape geometry, maintain recommended pad and mask dimensions, and provide appropriate via-in-pad or via-array options according to the chosen PCB technology. Check drill-to-copper and solder-mask requirements with the assembler because BGA assembly yield depends heavily on package geometry and thermal conditions.
Separate high-speed memory and programmable-I/O routes from sensitive clock, reset, and configuration paths. Use continuous reference planes, controlled impedance, length matching where required, and avoid splits beneath high-speed nets. Keep switching power stages away from clock inputs and sensitive analog sections. AMD's Zynq-7000 package pinout and reference-design guidance should control ball selection and layer transitions.
Estimated: junction temperature depends on total device dissipation, ambient temperature, board construction, airflow, and the package-to-board thermal path, so no fixed rise can be stated without those inputs. For a preliminary estimate, use P_est = sum(Vrail × Irail) plus FPGA dynamic power, then apply the selected package and board thermal model. Verify the result with a worst-case processing load, sustained I/O activity, elevated ambient temperature, and the selected speed grade.
Informações de conformidade
No explicit environmental-compliance statement for the exact XC7Z020-1CLG484CES ordering code was established. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification status with AMD before procurement.