XDPE192C4C0000XTMA1 - 12-Phase Digital VR14 Controller | Infineon
N.º da peça: XDPE192C4C0000XTMA1 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $9.85 | $9,85 |
| 10 | $8.92 | $89,20 |
| 100 | $7.65 | $765,00 |
| 500 | $6.5 | $3.250,00 |
| 1.000 | $5.4 | $5.400,00 |
XDPE192C4C0000XTMA1 Visão geral
A digital multiphase controller is a power-supply IC that orchestrates multiple parallel buck converter phases to deliver high output current at low voltage, dynamically shedding phases to optimize efficiency at light load. The XDPE192C4 belongs to the broader family of multiphase buck controllers in the power management IC hierarchy, sitting between a discrete buck converter and a fully integrated VR module.
Key features include flexible dual-loop control with up to 12 phases allocated between the Core rail and a second loop for the I/O or memory rail, digitally programmable PID loop compensation, Active Transient Response (ATR/FATR), automatic phase shedding, fast DVID response, and Pulse Frequency Modulation (PFM) for light-load efficiency. The digital architecture enables per-platform firmware configuration rather than external resistor-set loop components.
The architecture combines a high-resolution analog current-sense front end, an ARM Cortex-M0 digital control core, and PMBus telemetry, supporting telemetry for voltage, current, temperature, and fault status. The 5x5 mm PG-VQFN-48-63 package uses an exposed pad for thermal relief, suitable for forced-air server environments.
Typical applications include VR14 server motherboards, workstation and high-end desktop CPU VRs, memory VRTT rails, and embedded compute platforms. Pairing the controller with Infineon OptiMOS power stages such as TDA38826 builds a complete digital multiphase VR solution.
When designing with the XDPE192C4, ensure the PMBus address strap and boot configuration resistors are set per platform firmware. The exposed pad must be soldered to a sufficiently large copper area (at least 1 sq. inch) for the thermal envelope during 12-phase full-load operation. The PMBus pull-ups should be sized for the selected bus speed (100 kHz to 1 MHz).
This page synthesizes Infineon datasheet parameters, distributor pricing, and validated drop-in alternatives not found in the manufacturer datasheet alone, providing a complete engineering reference for the XDPE192C4C0000XTMA1.
Alternativas drop-in para XDPE192C4C0000XTMA1 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XDPE192C4C0000XTMA1 (mesmo formato e footprint) — diferindo em Operating Temperature, Package, Product Type.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
XDPE19284C0000XTMA1
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XDPE192C3B0000XTMA1
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XDPE192C2A0000XTMA1
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XDPE192C4C0000XTMA1
✅ Drop-In✓ Em estoque
$5.4 / unidade
Ver ficha técnica →XDPP1148100BXUMA1
✅ Drop-In✓ Em estoque
$5.25 / unidade
Ver ficha técnica →XDPE192C4C0000XTMA1 Classificações máximas e características elétricas
| Product Type | Digital dual-loop multiphase PWM controller |
| Number of Phases | Up to 12 phases |
| Number of Loops | 2 (Core + I/O / memory) |
| Intel VR Specification | VR13 / VR13HC / VR14 server |
| SVID Compliance | Intel SVID Rev 1.94 |
| IMVP Compliance | IMVP9.1 / IMVP9.2 |
| PMBus Compliance | PMBus Rev 1.3.1, up to 1 MHz |
| Digital Core | ARM Cortex-M0 |
| Recursos de controle | ATR / FATR, fast DVID, auto phase shedding, PFM |
| Loop Compensation | Digitally programmable PID |
| Encapsulamento | PG-VQFN-48-63 (5x5 mm) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| Temperatura de operação | -40C to +125C (industrial) |
| Application Segment | Server, workstation, high-end desktop |
Configuração de pinos do XDPE192C4C0000XTMA1
| Pino 1 | PVCC — Power supply for internal gate drivers |
| Pino 2 | VSEN1 — Voltage sense, loop 1 (Core) |
| Pino 3 | VSEN2 — Voltage sense, loop 2 (I/O / memory) |
| Pino 4 | VBOOT1 — Bootstrap for high-side driver, phase 1 |
| Pino 5 | UGATE1 — High-side gate drive, phase 1 |
| Pino 6 | LGATE1 — Low-side gate drive, phase 1 |
| Pino 7 | PWM1 — PWM output to power stage, phase 1 |
| Pino 8 | PWM2 — PWM output to power stage, phase 2 |
| Pino 9 | PWM3 — PWM output to power stage, phase 3 |
| Pino 10 | PWM4 — PWM output to power stage, phase 4 |
| Pino 11 | PWM5 — PWM output to power stage, phase 5 |
| Pino 12 | PWM6 — PWM output to power stage, phase 6 |
| Pino 13 | GND — Ground |
| Pino 14 | PWM7 — PWM output to power stage, phase 7 |
| Pino 15 | PWM8 — PWM output to power stage, phase 8 |
| Pino 16 | PWM9 — PWM output to power stage, phase 9 |
| Pino 17 | PWM10 — PWM output to power stage, phase 10 |
| Pino 18 | PWM11 — PWM output to power stage, phase 11 |
| Pino 19 | PWM12 — PWM output to power stage, phase 12 |
| Pino 20 | SDA — PMBus serial data |
| Pino 21 | SCL — PMBus serial clock |
| Pino 22 | ALERT — PMBus alert output |
| Pino 23 | SVID_DATA — Intel SVID data line |
| Pino 24 | SVID_CLK — Intel SVID clock line |
| Pino 25 | SVID_ALERT — Intel SVID alert |
| Pino 26 | VRHOT — Thermal hot indicator output |
| Pino 27 | IMON1 — Current monitor, loop 1 |
| Pino 28 | IMON2 — Current monitor, loop 2 |
| Pino 29 | TMON — Temperature monitor input |
| Pino 30 | TSEN — Thermal sense input (external diode) |
| Pino 31 | VR_RDY — Voltage rail ready output |
| Pino 32 | EN — Enable input |
| Pino 33 | PGOOD — Power good output |
| Pino 34 | FAULT — Fault indicator output |
| Pino 35 | ADDR — PMBus address strap |
| Pino 36 | CFG0 — Boot configuration pin 0 |
| Pino 37 | CFG1 — Boot configuration pin 1 |
| Pino 38 | CFG2 — Boot configuration pin 2 |
| Pino 39 | VDD — Internal digital supply |
| Pino 40 | NC — Not connected (per datasheet) |
Aplicações típicas
XDPE192C4C0000XTMA1 é adequado para 6 aplicaçãos: Intel VR14 Server CPU Voltage Regulator, Workstation High-End Desktop CPU VR, Memory VRTT Rail Voltage Regulator, Embedded Compute and Edge Server Platforms, AI Server Auxiliary Rail Power, Cloud Server Motherboard PMBus-Managed VR.
Intel VR14 Server CPU Voltage Regulator
The XDPE192C4C0000XTMA1 is purpose-built for Intel VR14 server CPU/Core voltage regulation, with up to 12 phases supporting >500 A output current when paired with high-current OptiMOS power stages. Its dual-loop architecture dedicates phases to the Core rail and a second loop for the I/O or memory rail, and its IMVP9.1/9.2 and SVID Rev 1.94 compliance enables direct attach to Intel server CPUs without external protocol translation. ATR/FATR transient response is critical for VR14 server load-line accuracy during turbo-mode steps.
Recomendado
Workstation High-End Desktop CPU VR
For high-end desktop and workstation CPUs, the XDPE192C4C0000XTMA1 delivers VR14-class digital control with up to 12 phases of parallel buck power, providing high peak current for boost-clock operation and clean transient response under load. The 5x5 mm PG-VQFN-48-63 footprint suits compact ATX-board VR zones, and the PMBus interface enables platform-level telemetry for power capping, efficiency optimization, and fault logging. Pairing the controller with Infineon TDA38826 power stages yields a 6+1+1 phase topology with PMBus-configurable VID.
Recomendado
Memory VRTT Rail Voltage Regulator
The second loop of the XDPE192C4C0000XTMA1 can be configured as a dedicated VRTT rail for DDR4/DDR5 memory, providing a tightly regulated termination voltage with PMBus telemetry. Digital PID compensation, programmable via PMBus, allows per-platform tuning of the VRTT load-line without external resistor changes, simplifying manufacturing. The automatic phase shedding feature scales the rail to one phase at light load, reducing memory VR losses during idle states typical in server workloads.
Recomendado
Embedded Compute and Edge Server Platforms
The XDPE192C4C0000XTMA1 suits industrial and edge-server embedded compute platforms that require VR14-class CPU power with PMBus telemetry, where -40C to +125C industrial temperature range is mandatory. Its exposed-pad PG-VQFN-48-63 package uses a small 5x5 mm footprint that fits dense SBC layouts, and the digital control loop tolerates component variation common in extended-temperature designs. PMBus monitoring supports remote platform management required in edge data centers.
Recomendado
AI Server Auxiliary Rail Power
While the XDPE192C4C0000XTMA1 targets Intel CPUs, its dual-loop architecture can power auxiliary rails in AI server platforms that include Intel CPUs alongside GPU accelerators. One loop drives the CPU Core, while the second loop handles memory or system-agent rails with PMBus-monitored telemetry. The 12-phase flexible allocation and PMBus programmability make it adaptable to non-CPU rails in heterogeneous compute platforms, though direct GPU VR requires a different controller matched to Open VReg or SVI3.
Recomendado
Cloud Server Motherboard PMBus-Managed VR
Cloud server motherboards benefit from the XDPE192C4C0000XTMA1's PMBus Rev 1.3.1 interface at up to 1 MHz, which supports fast platform-level telemetry for power budgeting, dynamic load-line adjustment, and fault propagation. The digital architecture allows firmware updates to re-tune the loop for next-generation CPU SKUs without PCB changes, extending platform longevity. The exposed-pad QFN-48 package simplifies thermal management in forced-air rack chassis.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XDPE192C4C0000XTMA1 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XDPE19284C0000XTMA1 | XDPE192C3B0000XTMA1 | XDPE192C2A0000XTMA1 | XDPP1148100BXUMA1 |
|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon |
| Package | PG-VQFN-48-63 (5x5 mm) | PG-VQFN-48-63 (5x5 mm) - same | PG-VQFN-48-63 (5x5 mm) - same | PG-VQFN-48-63 (5x5 mm) - same | PG-VQFN-48-63 (5x5 mm) - same |
| VR Specification | VR13 / VR13HC / VR14 | VR13 / VR14 | VR12.5 / VR13 | VR12.5 / VR13 | VR13 |
| PMBus Compliance | Rev 1.3.1, up to 1 MHz | Rev 1.3.1 | Rev 1.3 | Rev 1.2 | Rev 1.3.1 |
| SVID Compliance | Rev 1.94 + IMVP9.1/9.2 | Rev 1.94 | Rev 1.85 | Rev 1.7 | Rev 1.9 |
| Number of Loops | 2 (dual loop) | 2 | 2 | 2 | 1 |
| Digital Core | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 |
Principais diferenciais
- VR14 server compliance with IMVP9.1/9.2 SVID Rev 1.94 (vs XDPE192C3B0000XTMA1)
- Up to 12 phases with dual-loop flexible allocation (vs XDPE19284C0000XTMA1)
- PMBus Rev 1.3.1 with up to 1 MHz bus speed (vs XDPE192C2A0000XTMA1)
Notas de projeto
Estimated: at full 12-phase operation, the PG-VQFN-48-63 exposed pad dissipates controller quiescent and gate-drive losses on the order of 1-2 W. The exposed pad MUST be soldered to a copper pour of at least 1 sq. inch with multiple thermal vias to an inner ground plane. In forced-air server chassis with >200 LFM airflow, junction temperature rise can be held below 30C; in still-air conditions, derate phase count or add a heatsink. The Infineon application note on PG-VQFN-48-63 thermal management provides reference layouts for both server and workstation platforms.
Do not assume the XDPE192C4C0000XTMA1 is drop-in compatible with the XDPE192C3B or XDPE192C2A. Although the package is the same, the PMBus command set, SVID register map, and ATR/FATR tuning constants differ. Firmware must be revalidated for each controller variant. The configuration pins CFG0/CFG1/CFG2 select boot mode and must be set per Infineon datasheet Table 3; incorrect strap values result in boot failure or undefined PWM behavior. Always ground unused CFG pins through 10 kohm resistors to avoid floating-state boot errors.
Place the XDPE192C4C0000XTMA1 within 25 mm of the power stages it drives; long PWM traces pick up noise and degrade transient response. The SDA/SCL PMBus lines need 2.2 kohm pull-ups to 3.3 V for 1 MHz operation; 4.7 kohm is acceptable only at 400 kHz. Use 100 ohm series termination on SVID lines if the CPU is more than 50 mm away. The TSEN input requires a dedicated MMBT3904-style external diode routed with Kelvin traces to the hottest power-stage location, not a generic board thermistor.
Informações de conformidade
RoHS compliant per Infineon product page. Industrial temperature grade -40C to +125C. Not AEC-Q100 qualified (server/industrial segment, not automotive).
