Товары (44.000+)

ISL8325IB-T - Dual 60Ω SPST Analog Switch | Renesas Electronics
ISL8325IB-T

ISL8325IB-T - Dual 60Ω SPST Analog Switch | Renesas Electronics

Renesas Electronics ISL8325IB-T is a low-voltage, single-supply, dual SPST analog switch with a 60 Ω on-resistance and an 8-pin SOIC package. The device contains two independently controlled analog switches in a 1:1 signal topology and is designed for single-supply operation from 1.8 V to 12 V. Its surface-mount SOIC package supports compact analog routing in battery-powered and low-voltage electronic systems. An analog switch is a solid-state semiconductor device that connects or isolates circuit nodes using controlled voltage signals. The SPST configuration provides one normally open or normally closed conduction path, while a dual-switch package can route two independent signals. Within the broader hierarchy, this product is an analog switch IC, interface IC, and discrete-level signal-routing component used to build multiplexers, sample-and-hold paths, and configurable analog front ends. The key operating characteristics are the dual SPST architecture, 60 Ω nominal on-resistance, 1:1 switch topology, and single-supply range of 1.8 V to 12 V. The -T ordering suffix identifies the tape-and-reel shipping configuration. These characteristics make the ISL8325IB-T appropriate for low-voltage analog signal paths where two channels must be switched without adding a mechanically complex relay. The ISL8323 through ISL8325 family is designed for precision analog switching in single-supply systems. Renesas describes these devices for battery-powered equipment, where the combination of low-voltage operation and a compact surface-mount package helps conserve board area. Two switches in one package also reduce component count compared with two separate single-switch ICs. Because on-resistance can vary with supply voltage and signal amplitude, the application should verify the datasheet resistance curve against the actual signal range. Typical uses include battery-powered measurement systems, portable medical or industrial instruments, analog test equipment, signal routing between a sensor and an amplifier, and multiplexed low-voltage data-acquisition systems. In a multiplexed design, separate switches can bring different sensor outputs onto a common amplifier or converter input. The switch-control signals should remain within the logic thresholds specified for the selected supply voltage. The primary design consideration is ensuring that analog signals never exceed the device's absolute maximum ratings, particularly during power-down or when a control input remains high while the supply collapses. Place the IC close to the signals it routes, keep high-impedance nodes short, and provide a stable supply reference. The manufacturer pin description and electrical characteristics should be used when assigning PCB tracks and logic levels. This product page combines the device architecture, verified source links, application guidance, pinout status, and engineering-oriented selection information. It also distinguishes the required SOIC footprint from unsupported alternatives, helping designers avoid substitutions that look electrically similar but cannot be mounted pin-to-pin.

Запрос цены Контакты
ISL8325IBZ - Dual SPST Analog Switch, 60 Ohm, SOIC-8 | Renesas
ISL8325IBZ

ISL8325IBZ - Dual SPST Analog Switch, 60 Ohm, SOIC-8 | Renesas

The Renesas Electronics ISL8325IBZ is a low-voltage, single-supply, dual SPST analog switch with a 1:1 signal configuration and 60 ohm on-resistance, packaged in an 8-pin SOIC. It provides two independently controlled analog switches for routing low-voltage signals within test, measurement, communication, and control systems. The 1:1 configuration indicates one terminal connected to one common terminal when the corresponding switch is closed. An analog switch is an electronic semiconductor device that steers signals between circuit paths under digital control. The SPST designation means single-pole, single-throw: each switch has one common terminal and one selectable terminal rather than multiple throw positions. As a dual analog switch, the ISL8325IBZ contains two such elements in one package, allowing paired routing operations while reducing board area and control-component count. The key documented specifications are two switch circuits, a 1:1 configuration, 60 ohm on-resistance, single-supply operation, low-voltage operation, and an 8-pin SOIC package. The 60 ohm on-resistance identifies the resistance presented by a closed switch path and makes the device suitable for applications where moderate insertion resistance is acceptable. The SOIC-8 package is a surface-mount package suitable for automated assembly and conventional PCB layouts. The device combines analog signal routing with logic-level control in a compact integrated circuit. Each independent switch can isolate or connect a signal path, supporting multiplexing-style signal selection, source selection, test-point isolation, and straightforward circuit bypassing. Its dual-channel organization allows one control interface to manage related routing functions while keeping the analog paths physically separate. Typical uses include low-voltage sensor signal switching, data-acquisition input selection, instrumentation signal routing, communication-path isolation, and embedded control systems that need two compact SPST switches. In these applications, the 60 ohm path resistance and single-supply architecture simplify implementation where low-voltage analog signals must be redirected under firmware or logic control. For PCB design, use the pin-description table in the manufacturer datasheet when assigning control and analog nets. Keep analog traces short, provide a continuous ground reference, and place interface protection close to externally accessible connectors. Confirm the switch state during power-up if a default signal path is required, because the control logic and supply sequencing determine the initial routing condition. This page combines the manufacturer part identity, verified distributor specifications, package details, replacement guidance, and application-focused design guidance. It also distinguishes true drop-in options from related family members and provides practical considerations for using the ISL8325IBZ in low-voltage switching systems.

Запрос цены Контакты
ISL83483IB - 3.3V 250kbps RS-485/RS-422 Transceiver | Renesas
ISL83483IB

ISL83483IB - 3.3V 250kbps RS-485/RS-422 Transceiver | Renesas

The Renesas Electronics ISL83483IB is a 3.3 V, half-duplex RS-485 and RS-422 differential line transceiver operating at up to 250 kbps in an 8-pin SOIC package. It combines a low-power BiCMOS implementation with slew-rate-limited driver outputs, helping reduce electromagnetic interference and minimize reflections on improperly terminated cables. The device accepts a 3 V to 3.6 V supply and is intended for industrial balanced-communication systems. An RS-485/RS-422 transceiver is an interface IC that converts between logic-level signals and balanced differential signals used for robust data transmission. RS-422 supports point-to-point, full-duplex links, while RS-485 commonly supports multidrop half-duplex buses. The ISL83483IB multiplexes its driver and receiver paths for half-duplex communication, making it useful where one pair of bus conductors serves both directions. The principal feature of the ISL83483IB is its 250 kbps slew-rate-limited operation. Limiting the driver edge rate reduces high-frequency harmonics and associated EMI. The manufacturer also identifies the device as meeting both RS-485 and RS-422 requirements. Its 3 V to 3.6 V operating range accommodates regulated 3.3 V systems with the specified supply tolerance. In half-duplex operation, the transceiver changes direction between transmission and reception. The receiver provides a logic-level output for the host controller, while the driver sends complementary differential voltage onto the bus. Because a single device must manage both functions, interface timing and bus direction control remain important parts of the surrounding firmware and circuitry. Typical uses include industrial control links, factory automation equipment, building automation, instrumentation, and other balanced serial networks operating at modest data rates. The ISL83483IB is particularly suitable where low EMI is more important than maximum line rate, or where long cables and imperfect terminations can produce reflections. The PCB layout should preserve the differential pair as a continuous, impedance-controlled route from the transceiver to the connector. Place termination, protection, and bus-surge components close to the line interface, while keeping switching regulators and high-current return paths away from the receiver input. Use the manufacturer pin-description and recommended-circuit guidance when assigning traces and selecting bypass capacitance. This page combines the manufacturer interface description, package identification, operating limits, drop-in alternatives, and application guidance to support schematic capture, PCB design, sourcing, and lifecycle review of the ISL83483IB.

Запрос цены Контакты
ISL83485IB - 3.3V 10Mbps RS-485/RS-422 | Renesas
ISL83485IB

ISL83485IB - 3.3V 10Mbps RS-485/RS-422 | Renesas

The Renesas Electronics ISL83485IB is a 3.3 V, half-duplex RS-485/RS-422 transceiver supporting data rates up to 10 Mbps in an 8-pin SOIC package. The device combines one driver and one receiver, multiplexing the bus driver and receiver connections to support economical half-duplex communication over a balanced twisted-pair interface. A transceiver converts digital logic-level signals into differential signals suitable for reliable data transmission over longer cable runs. In the broader semiconductor hierarchy, the ISL83485IB belongs to the interface IC class and specifically implements the RS-485/RS-422 physical-layer standard. Balanced differential signaling improves noise immunity and permits communication between equipment located at different ground potentials when implemented with suitable protection and grounding practices. Renesas describes the ISL83485 family as a BiCMOS, 3.3 V-powered product family specified for 3.0 V to 3.6 V supplies, allowing a 10% supply-voltage tolerance. Its advertised 10 Mbps maximum data rate makes it suitable for industrial control, instrumentation, factory automation, data acquisition and other balanced-bus systems requiring more bandwidth than conventional low-speed RS-485 links. The half-duplex architecture allows the same differential bus conductors to carry transmitted and received data at different times. This reduces the number of external bus connections compared with a full-duplex implementation, but the system must ensure that only one device transmits at a time. The driver's switching behavior, receiver thresholds, supply tolerances and external network termination remain central to dependable operation. Typical uses include PLC and sensor networks, industrial communication links, building-control equipment, test and measurement instruments, and embedded data-acquisition systems. The 8-pin SOIC package is also suitable for compact, surface-mounted equipment. Its package should be treated as SOIC-8 when planning a PCB footprint, while exact exposed-pad and thermal details should be checked in the manufacturer datasheet. Designers should pay close attention to bus termination, common-mode voltage, grounding, protection, and the timing of driver-enable control. Differential routing should use a balanced pair, avoid splits in the trunk, and be terminated only where required by the system topology. Decoupling capacitors should be placed close to the supply and ground pins, while external protection may be needed for exposed industrial cabling. This page combines the manufacturer's interface and supply information with practical package, replacement, comparison, and design guidance. It is intended to help engineers identify whether the ISL83485IB fits a 3.3 V, half-duplex RS-485/RS-422 design before completing footprint, signal-integrity, and protection reviews.

Запрос цены Контакты
ISL83485IBZ-T - 3.3V 10Mbps RS-485/422 Transceiver, 8-SOIC | Renesas
ISL83485IBZ-T

ISL83485IBZ-T - 3.3V 10Mbps RS-485/422 Transceiver, 8-SOIC | Renesas

The Renesas ISL83485IBZ-T is a 3.3V-powered, half-duplex, 10Mbps RS-485/RS-422 transceiver housed in an 8-pin SOIC package with a 1TX/1RX channel count and an integrated shutdown pin for low-power standby. It is built on a BiCMOS process that supports both the RS-485 differential multipoint standard and the RS-422 point-to-point standard, while delivering 10Mbps high-speed signaling for time-critical industrial links. Per the Renesas product page, this part is currently flagged as Last Time Buy, meaning new designs should plan for an alternative. A RS-485/RS-422 transceiver is a physical-layer (PHY) interface IC that converts the single-ended logic-level signals of a UART or microcontroller into the differential voltage swings required for balanced twisted-pair transmission. These transceivers are categorized under interface ICs and, more broadly, under wired-connectivity semiconductors, sitting beneath network controllers and above simple line drivers in the silicon hierarchy. They enable robust, noise-immune communication over long cable runs in electrically harsh environments. The key features of this part include a wide 3.0V to 3.6V supply range optimized for 3.3V logic systems, 1/8 unit-load receiver input impedance that allows up to 256 transceivers on a single bus, hot-plug circuitry that limits transient bus current during insertion, and a dedicated shutdown pin that drops quiescent current to microamp levels for power-sensitive applications. The 8-SOIC package supports a standard surface-mount footprint and is pin-compatible with industry-standard 3.3V RS-485 parts such as the MAX485 and SN75176B. The BiCMOS process combines bipolar drive strength on the bus side with CMOS low-power logic, achieving a balance of speed and quiescent consumption that pure-CMOS parts cannot match. With 10Mbps capability, the ISL83485IBZ-T fits high-speed sensor data links, while the part also survives ±15kV HBM ESD strikes per the datasheet, eliminating the need for external TVS protection in most field installations. Typical applications include industrial fieldbus networks, building automation gateways, security camera RS-485 control links, point-of-sale peripheral connections, and motor-drive feedback loops. In each of these scenarios, the ISL83485IBZ-T serves as the PHY layer between a UART-enabled host and the differential twisted-pair bus. When designing with this part, provision for a 120 ohm differential termination at each bus end and ensure the shutdown pin is tied high through a pull-up if unused, to avoid floating logic. A small 100nF decoupling capacitor placed within 5mm of the VCC pin is essential for hot-plug transient suppression. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer product page.

Запрос цены Контакты
ISL83485IP - 3.3V 10Mbps Half-Duplex RS-485/RS-422 | Renesas
ISL83485IP

ISL83485IP - 3.3V 10Mbps Half-Duplex RS-485/RS-422 | Renesas

The Renesas Electronics ISL83485IP is a 3.3 V, single-channel, half-duplex RS-485/RS-422 transceiver operating at up to 10 Mbps in an 8-pin PDIP package. It combines one driver and one receiver in a BiCMOS device designed for balanced industrial communication links. Its 3.3 V supply supports low-voltage systems that need high-speed differential signaling without requiring a 5 V transceiver. An RS-485/RS-422 transceiver is an interface IC that converts logic-level transmit and receive signals into balanced differential signals and back again. It belongs to the communication-interface hierarchy: transceiver > line driver and receiver > RS-485/RS-422 interface IC > semiconductor. This makes the ISL83485IP suitable for industrial control, data acquisition, instrumentation, and equipment interconnects where signal integrity and noise immunity are important. Key device characteristics include a 3.3 V power supply, half-duplex operation, a maximum data rate of 10 Mbps, and support for both RS-485 and RS-422 standards. The device also uses a low-power BiCMOS implementation. Half-duplex operation means the transmitter and receiver share the same bus pair, so the design must control driver enable and receiver enable states to avoid contention on the network. The receiver provides a differential input stage for noisy industrial environments, while the balanced bus reduces susceptibility to common-mode noise compared with a single-ended interface. RS-485 operation supports multidrop bus arrangements subject to the applicable termination and biasing rules, whereas RS-422 typically uses a point-to-point or one-driver topology. The exact driver-enable, receiver-enable, and fault-recovery behavior should be confirmed from the manufacturer datasheet before final schematic sign-off. Typical uses include PLC-to-sensor links, motor-control diagnostics, industrial test equipment, factory monitoring nodes, and embedded systems communicating with remote modules. The 10 Mbps capability is useful for burst-oriented protocols, while the 3.3 V supply simplifies interfacing with modern low-voltage controllers. For PCB implementation, keep the transceiver and any termination components close to the connector to minimize unbalanced stub length. Use a controlled-impedance differential pair for the balanced bus, provide a solid ground reference, and place the transceiver supply bypass capacitor directly beside its power pin. Avoid long point-to-point stubs because they can degrade signal integrity at the supported 10 Mbps data rate. This page combines manufacturer specifications, verified distributor availability information, package details, replacement guidance, and application-oriented design notes. It is intended to help engineers evaluate the ISL83485IP against same-package alternatives and plan a robust RS-485 or RS-422 interface implementation.

Запрос цены Контакты
ISL83488IB - 3.3V 250kbps RS-485/RS-422 Transceiver | Renesas
ISL83488IB

ISL83488IB - 3.3V 250kbps RS-485/RS-422 Transceiver | Renesas

The Renesas Electronics ISL83488IB is a 3.3V, 250kbps, full-duplex RS-485/RS-422 transceiver in an 8-lead SOIC package. It combines one differential driver and one differential receiver, allowing a balanced communication link to transmit and receive simultaneously through separate driver and receiver pins. Its 3.3V supply operation, BiCMOS implementation, and slew-rate-limited 250kbps data rate suit low-speed industrial, instrumentation, and point-to-point serial links. An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals into balanced differential signals for reliable communication over cables or PCB interconnects. RS-485 supports multipoint bus networks with driver-enable control, while RS-422 generally describes a point-to-point differential interface. The ISL83488 family supports both standards, and its full-duplex configuration avoids multiplexing the transmitter and receiver through a shared bus. The primary operating characteristics are a 3.3V power supply, a maximum data rate of 250kbps, and one transmit and one receive channel in an 8-SOIC package. Slew-rate limiting reduces the high-frequency content of the driver output, which can help limit EMI and reflections on longer interconnects. The receiver converts the differential bus voltage into a single-ended logic output for the host controller. Technically, the ISL83488 is a BiCMOS interface device optimized for low-power, 3.3V balanced communication. The ISL83488 and related ISL83490 devices use separate receive and transmit paths, while the ISL83488 configuration is intended for applications that do not require independent receiver and transmitter output-disable functions. Its 250kbps rate favors noise-limited data links over high-speed differential communication. Typical uses include industrial control links, test and measurement systems, building automation equipment, point-to-point sensor interfaces, and embedded serial networks. The full-duplex arrangement is particularly useful where the master must receive a response while transmitting a command, or where a node communicates over a dedicated balanced pair rather than a shared multidrop bus. PCB design should preserve the differential signal path, connect the transceiver ground reference close to the device, and provide controlled termination appropriate to the cable length and topology. Disable functions and bus direction control must be handled by the host circuitry when the selected family member does not provide dedicated enable pins. Confirm the exact pin assignments and termination strategy against the manufacturer datasheet before layout release. This product record combines the device function, package and operating characteristics with practical interface-design guidance, verified replacement analysis, and an engineering-focused comparison of directly related ISL83488-family transceivers.

Запрос цены Контакты
ISL83488IP - 3.3V 250kbps Full-Duplex RS-485 Transceiver | Renesas
ISL83488IP

ISL83488IP - 3.3V 250kbps Full-Duplex RS-485 Transceiver | Renesas

Renesas Electronics ISL83488IP is a 3.3 V, full-duplex RS-485 and RS-422 transceiver operating at up to 250 kbps. It uses a slew-rate-limited BiCMOS output stage and is packaged in an 8-pin plastic dual in-line package identified by the IP suffix. The device provides separate receiver inputs and transmitter outputs for balanced point-to-point communication. A differential line transceiver is the interface between a logic-level controller and a balanced, noise-resistant communications bus. The ISL83488IP combines a transmit channel, receive channel, bus driver, and differential receiver in one package. RS-485 is commonly used for longer, multipoint industrial networks, while RS-422 is generally associated with dedicated driver and receiver connections. Slew-rate limiting reduces edge speed and electromagnetic interference, making this device especially useful where 250 kbps is sufficient. The principal operating characteristics are a 3.3 V power requirement, a maximum signaling rate of 250 kbps, full-duplex operation, and support for both RS-485 and RS-422 interfaces. Separate transmit and receive paths allow the node to send and receive simultaneously. The 8-PDIP format supports conventional through-hole PCB layouts, prototyping, and repair of legacy industrial equipment where a surface-mount package would be inconvenient. Because the transmitter edges are deliberately slew-rate limited, the ISL83488IP favors controlled bus transitions and reduced high-frequency EMI over maximum data throughput. This characteristic makes it suitable for point-to-point RS-422 links, industrial instrumentation, factory equipment, and low-to-moderate-speed RS-485 networks. Designers should still preserve the recommended termination and fail-safe biasing network around the balanced bus. Typical uses include isolated and non-isolated industrial control links, sensor interfaces, data acquisition systems, motor controllers, and communications between test equipment and peripheral modules. The full-duplex configuration avoids sharing a driver and receiver on the same pair, which simplifies bus topology in point-to-point designs. In a multipoint RS-485 installation, however, only one driver should be active at a time, and the receiver must tolerate an inactive or shorted bus. For PCB implementation, route the balanced pair together, keep the transceiver close to the connector, and provide a solid ground reference. Decoupling capacitors should connect directly to the supply and ground pins, while surge protection should be placed near the external connector. Verify that cable length, termination, node count, and grounding remain compatible with the intended RS-485 or RS-422 topology. This product page combines the manufacturer specification, verified package and interface characteristics, compatible family context, practical layout guidance, and a structured replacement comparison. It is intended to help engineers identify the correct electrical function, package, data rate, and board-level integration requirements before committing the ISL83488IP to a new or legacy design.

Запрос цены Контакты
ISL83490IB - 3.3V 10Mbps RS-485/RS-422 Transceiver | Renesas
ISL83490IB

ISL83490IB - 3.3V 10Mbps RS-485/RS-422 Transceiver | Renesas

The Renesas Electronics ISL83490IB is a 3.3 V, full-duplex RS-485/RS-422 interface transceiver capable of operation at 10 Mbps in an 8-pin SOIC package. It integrates one driver and one receiver for bidirectional point-to-point communication, providing a compact interface between differential bus wiring and a 3.3 V digital system. The operating temperature range is -40°C to +85°C, and the surface-mount package supports automated PCB assembly. A differential transceiver is an interface IC that translates logic-level signals into balanced differential voltage pairs and converts received differential signals back into CMOS-compatible outputs. The RS-485 and RS-422 standards define the physical signaling method rather than the data protocol. This distinction allows ISL83490IB to carry data generated by UARTs, microcontrollers, industrial controllers, or other serial equipment while leaving packet framing and higher-layer control to the connected system. The ISL83490IB provides one transmit driver and one receive channel, supports 3.3 V operation, and is specified for data rates up to 10 Mbps. Its full-duplex configuration permits simultaneous transmission and reception on separate differential pairs. This is advantageous for point-to-point links, industrial equipment connections, test systems, and embedded control networks where half-duplex bus arbitration would add unnecessary application complexity. The SOIC-8 package also keeps the interface compact while providing adequate pin spacing for conventional board assembly. Renesas identifies the ISL83490 family as a low-power, high-speed RS-485/RS-422 transceiver family with operating variants described as high-speed or slew-rate-limited. The exact drive strength, receiver thresholds, bus loading, and propagation-delay limits should be taken from the pin-specific manufacturer datasheet before assigning a cable length or termination network. For long cables, incorrect termination, excessive stub lengths, or incompatible grounding can increase reflections even when the transceiver operates within its rated data rate. Typical uses include industrial control links, factory equipment connections, building automation equipment, instrumentation, and embedded serial links. In these systems, the transceiver converts the controller's UART logic into a balanced differential signal and receives the remote signal with common-mode rejection. Board-level protection, isolation, surge handling, and ground strategy remain application-level concerns because the ISL83490IB is primarily a signal interface rather than a surge-protection device. A robust layout should route the differential driver and receiver traces as a closely coupled pair with continuous reference planes, keep the driver output path short, and place any termination components near the appropriate connector or transceiver pin. Decoupling capacitors should connect directly to the device supply and ground pins with minimal loop area. Avoid adding large test pads or long stub branches to the bus traces, because such structures can degrade edge response at the supported 10 Mbps signaling rate. This page combines lifecycle information, interface-family positioning, compatible ordering variants, package guidance, and application-oriented design considerations. It is intended to accelerate component selection and PCB planning while keeping the manufacturer datasheet authoritative for pin assignments, electrical limits, recommended operating conditions, and ordering information.

Запрос цены Контакты
ISL83490IP - 3.3V Full-Duplex RS-485 Transceiver | Renesas
ISL83490IP

ISL83490IP - 3.3V Full-Duplex RS-485 Transceiver | Renesas

Renesas Electronics ISL83490IP is a 3.3 V low-power RS-485/RS-422 interface transceiver with one driver and one receiver in an 8-pin DIP package. It operates from a 3 V to 3.6 V supply, supports full-duplex communication, and is designed for industrial and instrumentation links where low-voltage logic, compact size, and through-hole assembly are useful. The package is an 8-DIP measuring 0.300 inch, or 7.62 mm, across the lead span. An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals into differential bus voltages and converts differential bus signals back into receiver-compatible logic. The ISL83490IP combines both functions in one package, placing it within the hierarchy of interface transceivers, wired-communication ICs, and semiconductors. Separate transmit and receive paths support full-duplex systems, allowing a controller to transmit and receive data simultaneously over two differential pairs. Key characteristics include a 3 V to 3.6 V supply range, one driver and one receiver, full-duplex operation, and support for both RS-485 and RS-422 communication protocols. Its 3.3 V supply operation suits modern embedded systems where 5 V interface devices may be undesirable. The through-hole 8-DIP construction also makes it practical for prototypes, industrial control equipment, legacy systems, and repair assemblies that favor socketed or leaded parts over fine-pitch surface-mount packages. The ISL83490IP is intended for high-speed or slew-rate-limited differential communication. Controlled slew behavior helps limit unwanted transitions on the bus, while the low-power 3.3 V design can simplify interface design around low-voltage controllers. The transceiver architecture requires correct termination, biasing, grounding, and isolation practices to achieve reliable operation in multi-node RS-485 networks. Typical uses include industrial serial controllers, factory automation equipment, building-control interfaces, test and measurement systems, motor-control diagnostics, and embedded communications modules. In each application, the IC can bridge a controller's UART or logic signals to a differential RS-485 or RS-422 bus, reducing wiring susceptibility to common-mode noise compared with single-ended signaling. Designers should follow the pin-description table in the manufacturer datasheet when assigning PCB tracks and should preserve the specified supply decoupling arrangement. Cable length, topology, data rate, termination resistance, common-mode range, and grounding determine whether the complete communications link is reliable; successful transceiver selection alone does not guarantee standards-compliant operation. This page combines interface classification, package and supply characteristics, application guidance, comparison parameters, and practical design notes to support evaluation of the ISL83490IP in low-voltage RS-485 and RS-422 systems.

Запрос цены Контакты
ISL83491IB - 3.3V 10Mbps RS-485/RS-422 Transceiver | Renesas
ISL83491IB

ISL83491IB - 3.3V 10Mbps RS-485/RS-422 Transceiver | Renesas

Renesas Electronics ISL83491IB is a 3.3V, low-power, single-channel RS-485/RS-422 transceiver with integrated driver and receiver in a 14-pin SOIC package. The device supports full-duplex balanced communication and is specified for operation up to 10 Mbps, making it suitable for industrial control links, instrumentation, and communication equipment. Its BiCMOS architecture is designed to combine low supply current with controlled driver slew rate, helping reduce electromagnetic interference and ringing on transmitted signals. The manufacturer describes the ISL83491 family as meeting both RS-485 and RS-422 communication requirements. An RS-485/RS-422 transceiver is an interface IC that converts between digital logic-level signals and balanced differential lines. RS-422 is commonly associated with point-to-point, full-duplex links, while RS-485 supports multipoint buses with an enable-controlled driver. The ISL83491IB combines these functions in one device and includes separate transmit and receive control in its interface arrangement. This makes it useful when a system needs flexible line-driver enable control, galvanic distance between noisy equipment, and communication over cables longer or more exposed than ordinary TTL interconnects. The ISL83491IB is identified as a 3.3V device. The verified manufacturer product-page result identifies the family as a 3.3V, full-duplex, 10 Mbps RS-485/RS-422 transceiver with enable, while distributor records identify ISL83491IB as a 14-SOIC device. The part uses a BiCMOS implementation and a slew-rate-limited driver according to the family description. These features are significant in systems where transmitted edge rate, bus reflections, and power consumption need to be balanced rather than optimized only for maximum throughput. Typical uses include industrial sensor and actuator networks, factory automation equipment, building-control systems, test and measurement instruments, and embedded communication modules. The 3.3V supply operation integrates directly with modern microcontroller and digital-logic rails. Designers should still verify the complete electrical limits, receiver thresholds, driver timing, and recommended external components in the manufacturer datasheet before releasing a production design. This page combines the manufacturer family description with the available distributor records for ISL83491IB and provides practical guidance for package selection, enable control, cabling, and PCB implementation. The ISL83491IB is intended for designers who need a compact, low-power, high-speed balanced-interface solution rather than a general-purpose TTL transceiver. A key design consideration is preserving the intended RS-485/RS-422 topology. Driver enable polarity, termination placement, common-mode behavior, and connector grounding must be checked against the system wiring. The 10 Mbps capability does not remove the need for controlled-impedance cabling, proper topology, and correct termination strategy.

Запрос цены Контакты
ISL83491IP - 3.3V RS-485/422 Transceiver | Renesas
ISL83491IP

ISL83491IP - 3.3V RS-485/422 Transceiver | Renesas

The Renesas Electronics ISL83491IP is a 3.3 V, low-power, single RS-485/RS-422 transceiver designed for balanced serial-data communication in a 14-pin through-hole Dual Inline Package. The ISL83491IP combines one driver and one receiver, supports full-duplex RS-422 and half-duplex RS-485 networks, and operates from a 3 V to 3.6 V supply according to the product information. An RS-485/RS-422 transceiver is an interface IC that converts logic-level transmit and receive signals into differential, balanced line signals. Differential signaling improves noise immunity by rejecting common-mode voltage, while the RS-485 standard supports multipoint buses and the RS-422 standard supports point-to-point or multidrop balanced links. The ISL83491IP belongs to the broader transceiver hierarchy within interface ICs and industrial communication semiconductors. The device is described as a 3.3 V low-power BiCMOS part that can operate as either a high-speed transceiver or a slew-rate-limited device. This flexibility allows the same pinout and interface architecture to address data rates where low EMI is more important than maximum throughput. The single-driver, single-receiver arrangement also reduces component count in full-duplex RS-422 links, while the driver-enable and receiver-enable functions support controlled bus operation. The 14-pin DIP package is intended for through-hole PCB assembly and is useful in industrial control equipment, instrumentation, communications adapters, and legacy or leaded systems. A DIP footprint offers generous spacing between leads, which can simplify manual inspection, prototyping, and rework. Designers should still evaluate connector spacing, insulation requirements, grounding, and high-voltage creepage when the transceiver is used in an industrial enclosure. Typical applications include industrial RS-485 field buses, factory automation links, building-control networks, telemetry equipment, and data-acquisition systems. In an RS-485 network, the transceiver converts the controller's UART logic into a differential bus signal and converts differential bus data back into UART-compatible receive logic. In an RS-422 design, the driver and receiver can support separate point-to-point differential links. The primary design consideration is bus termination. Long or high-noise RS-485 cables generally use termination at both ends of the bus, while RS-422 commonly places termination at the receiver. The selected data-rate mode, cable length, topology, grounding method, and transceiver count should be evaluated together because excessive loading or incorrect termination can produce reflections and unstable differential voltage. This product summary consolidates the device function, interface standards, supply range, package details, verified comparison behavior, and practical implementation guidance into one engineering-focused reference for evaluating the ISL83491IP in new and existing through-hole designs.

Запрос цены Контакты
ISL83699IR - Low-Voltage Quad SPDT Analog Switch | Renesas
ISL83699IR

ISL83699IR - Low-Voltage Quad SPDT Analog Switch | Renesas

Renesas ISL83699IR is a low-voltage, ultra-low on-resistance, bidirectional quad SPDT analog switch designed for single-supply operation from 1.65 V to 3.6 V. The device provides four 2:1 switch circuits in a 16-QFN package measuring 3 x 3 mm, making it suitable for compact, battery-powered equipment and low-voltage signal-routing systems. An analog switch is a semiconductor device that connects or disconnects analog signal paths under digital control. A quad SPDT configuration provides four independent selectors, each able to choose between two signal paths. This makes the ISL83699IR useful in applications such as battery-powered instrumentation, mobile equipment, communication interfaces, and test systems where low-voltage logic compatibility, fast switching, and low on-resistance are important. Key features include an on-resistance of 0.26 ohm, switching times of tON = 10 ns and tOFF = 7 ns, and compatibility with 1.8 V digital logic when operated from a single 3 V supply. The low-voltage operating range allows the switch to operate directly from energy-efficient system rails. The 3 x 3 mm 16-QFN package reduces board area while supporting dense analog and mixed-signal layouts. The switch is bidirectional, so signal paths can be routed in either direction. Bidirectional operation is valuable when a shared line must connect a peripheral, test point, or alternate signal source without requiring a directional multiplexer. The 2:1 architecture supports source selection, signal swapping, isolation, and bus-sharing functions in compact systems. Typical applications include mobile-phone accessory routing, portable measurement equipment, battery-powered sensor interfaces, communication modules, and general-purpose analog signal routing. Designers should confirm that signal amplitudes remain within the device’s operating limits and that control logic levels meet the datasheet requirements. Adequate input and output decoupling, short analog traces, and careful grounding help preserve switching performance. The principal design trade-off is the very low supply-voltage range. The ISL83699IR is optimized for 1.65 V to 3.6 V systems rather than higher-voltage rails. Designers using the same package in another design should verify control thresholds, signal swing, switching timing, and the exposed-pad connection before committing to a footprint. This product page combines the manufacturer’s operating limits and switching characteristics with package information, application guidance, comparison data, and practical design notes. It is intended to accelerate engineering selection while keeping the final circuit decisions tied to the manufacturer datasheet and board-level requirements.

Запрос цены Контакты
ISL83699IV - Quad SPDT Analog Switch, 450mOhm, 16-TSSOP
ISL83699IV

ISL83699IV - Quad SPDT Analog Switch, 450mOhm, 16-TSSOP

Renesas Electronics ISL83699IV is a low-voltage, bidirectional quad SPDT analog switch with four independently controlled 2:1 channels, an on-resistance of 450 mOhm, and a 16-pin TSSOP package. The device operates from a single +1.65 V to +3.6 V supply and supports 1.8 V-compatible control inputs when operated from a single +3 V supply. An analog switch is a semiconductor interface that routes electrical signals between circuit nodes under digital control. The ISL83699 belongs to the SPDT analog-switch hierarchy, combining four bidirectional SPDT switches, also described as a dual DPDT configuration. This product type supports signal routing in compact, low-voltage electronic systems where fewer GPIO pins, limited board area, and faster switching are important. The quad-channel architecture provides four selectable signal paths in one package. Each switch has a specified 450 mOhm on-resistance and supports fast switching, with the manufacturer documentation reporting 10 ns tON and 7 ns tOFF. Bidirectional operation allows the same analog path to carry signals in either direction, making the device suitable for shared test, measurement, communication, and signal-routing interfaces. The ISL83699IV is designed for single-supply operation from +1.65 V to +3.6 V, covering common low-voltage system rails. Its control interface is compatible with 1.8 V logic when the device uses a single +3 V supply. This combination allows a system designer to connect low-voltage digital control signals directly to the switch while maintaining operation from a compact power source. Typical uses include battery-powered portable equipment, mobile-phone and portable-device signal routing, test-and-measurement systems, and other applications that need to multiplex analog signals through a limited number of external pins. The 16-pin TSSOP package supports surface-mount assembly, while the four-switch configuration consolidates routing functions into one component. Designers should verify the complete logic levels, signal amplitude, channel configuration, and timing requirements in the Renesas ISL83699 datasheet. Care is especially important when a switched node carries signals near the supply limits, when break-before-make behavior matters, or when control inputs remain active during power sequencing. This page organizes the switch function, electrical limits, package details, application guidance, verified specifications, and engineering design considerations. It also distinguishes the IV ordering code from related tube, reel, and QFN packaging options so engineers can select the correct orderable configuration without confusing electrical compatibility with mechanical interchangeability.

Запрос цены Контакты
ISL8391IB - 4-Channel 35Ω SPST Analog Switch | Renesas
ISL8391IB

ISL8391IB - 4-Channel 35Ω SPST Analog Switch | Renesas

The Renesas Electronics ISL8391IB is a low-voltage, single- and dual-supply, quad SPST CMOS analog switch with four independent 1:1 circuits, 35 Ω on-resistance, and a 16-SOIC package. It accepts a single +2 V to +12 V supply or a dual ±2 V to ±6 V supply, making it suitable for low-voltage signal routing. The verified product data identifies low power consumption below 1 µW, leakage current up to 2.5 nA, and fast switching as key application characteristics. An analog switch is an electronically controlled interface that connects or disconnects an analog signal path. The SPST designation means each channel has one pole and one throw, while quad indicates four switching elements in one package. This device sits between sensors, amplifiers, data converters, test equipment, and other signal-chain circuits where a control signal must route a voltage without continuously conducting it. Its CMOS implementation supports low static power and high input impedance. Key features include four independent channels, 35 Ω on-resistance, low leakage, and operation from either single or dual supplies. The single-supply range is +2 V to +12 V, while the dual-supply range is ±2 V to ±6 V. These values allow use in battery-powered equipment and low-voltage instrumentation. The device is identified as a 16-SOIC, surface-mount interface IC. The four-channel architecture reduces the number of discrete switch components required in multiplexed or reconfigurable analog paths. Its low power consumption is useful when battery life is important, while low leakage helps preserve signal amplitude in high-impedance nodes. Fast switching makes the device relevant to measurement, control, and signal-routing systems, although exact switching-time limits and logic thresholds require confirmation from the manufacturer datasheet. Typical applications include battery-powered instrumentation, automated test equipment, data acquisition, sensor interfaces, audio and communications signal routing, and industrial control systems. The ISL8391IB is especially relevant when a designer needs four SPST paths in one 16-SOIC package and can operate the device from a low-voltage single or dual supply. Designers should verify the control-pin polarity, allowable analog signal range, absolute maximum ratings, and switching-time parameters against the manufacturer datasheet before layout. Keep routing short, provide a solid ground reference, and account for the 35 Ω on-resistance when designing source and load impedances. This page combines verified manufacturer-product information, distributor identification, package data, and practical selection guidance. It distinguishes documented values from parameters requiring verification and avoids presenting unreferenced electrical or timing specifications as established facts.

Запрос цены Контакты
ISL8391IB-T - Quad SPST Analog Switch, 35Ω, 16-SOIC
ISL8391IB-T

ISL8391IB-T - Quad SPST Analog Switch, 35Ω, 16-SOIC

Renesas Electronics ISL8391IB-T is a precision quad SPST analog switch with a 1:1 configuration and 35 Ω on-resistance, housed in a 16-pin SOIC package. The device operates from a single +2 V to +12 V supply or a dual ±2 V to ±6 V supply, making it suitable for low-voltage signal routing, battery-powered systems, instrumentation, and communication equipment. Its four independent switches provide selectable connection paths between analog input and output terminals. An analog switch is a semiconductor device that routes low-frequency electrical signals with minimal distortion. The SPST designation means each of the four channels has a single-pole, single-throw configuration, giving it one signal path per switch. As part of the broader interface-IC hierarchy, the ISL8391 combines CMOS switching circuitry, low power consumption, low leakage, and fast switching behavior in a standard surface-mount package. Key characteristics include 35 Ω on-resistance, operation from +2 V to +12 V in single-supply mode, operation from ±2 V to ±6 V in dual-supply mode, and low power consumption of approximately 1 µW in the intended low-power application condition. Maximum leakage current is listed as 2.5 nA. These characteristics help preserve signal integrity when the device handles external measurement, control, or sensor signals rather than high-speed data lanes. The four SPST channels allow a system to connect one source to one destination per channel, making the device useful for sample-and-hold routing, test-point multiplexing, signal isolation, and peripheral selection. Its CMOS implementation supports compact, low-power designs where supply current, off-state leakage, and predictable off-state behavior are important. The 16-pin SOIC footprint supports conventional surface-mount assembly and PCB routing patterns. Typical applications include battery-operated measurement equipment, portable test systems, data-acquisition modules, industrial control interfaces, and low-voltage analog signal conditioning. In these systems, the device can isolate inactive sensors, route a selected source to an amplifier or converter, or protect downstream circuitry by disconnecting external nodes. Supply selection depends on the signal swing and system grounding arrangement. When designing around the ISL8391IB-T, verify signal levels against the permitted input and output voltage ranges, account for 35 Ω on-resistance in the signal-path budget, and use a common ground reference when operating from dual supplies. Place bypass capacitance close to the supply pins and route high-impedance signal traces away from noisy switching nodes. The manufacturer datasheet pin-description table should be used directly when assigning PCB functions. This product overview combines the electrical characteristics, package information, application guidance, replacement considerations, and design notes engineers need when evaluating the ISL8391IB-T for a new analog-routing design. Use the Request a Quote form on this page for current commercial availability, lead time, and sourcing support.

Запрос цены Контакты
ISL8391IBZ - 4-Channel SPST Analog Switch | Renesas
ISL8391IBZ

ISL8391IBZ - 4-Channel SPST Analog Switch | Renesas

The Renesas Electronics ISL8391IBZ is a low-voltage CMOS quad analog switch with four independently controlled SPST channels, a maximum on-resistance of 35 ohms, and a 16-pin SOIC package. It operates from a single +2 V to +12 V supply or a dual ±2 V to ±6 V supply, making it suitable for low-voltage signal-routing systems. An analog switch is an integrated semiconductor that connects or disects analog signal paths under digital control. The ISL8391IBZ belongs to the analog switch and multiplexer hierarchy within interface ICs. Its low-voltage operation, low power consumption, low leakage, and fast switching make it appropriate for battery-powered instrumentation, precision measurement, communications, and test systems where signal integrity must be preserved while control signals remain CMOS-compatible. The device provides four SPST switch functions, 20 ohms typical and 35 ohms maximum on-resistance, and 1 ohm channel-to-channel on-resistance matching. Maximum leakage current is 2.5 nA, while switching times are 60 ns for turn-on and 30 ns for turn-off. Typical power consumption is approximately 1 microwatt, and the input interfaces support TTL- and CMOS-compatible control levels. The ISL8391IBZ can use either one supply rail or positive and negative rails, which allows the same switching architecture to handle unipolar or bipolar signals. Its 1:1 configuration provides straightforward signal isolation without changing the signal level. Minimum 2000 V ESD protection is specified using Method 3015.7, improving handling robustness in systems where exposed connectors and test leads may introduce electrostatic discharge transients. Typical applications include battery-powered data-acquisition equipment, automated test systems, communications equipment, sample-and-hold circuits, and precision signal routing. The 16-pin SOIC package supports conventional surface-mount assembly, while the low leakage and low power characteristics help preserve weak signals and conserve energy in portable systems. When designing a circuit around the ISL8391IBZ, verify the control-logic levels and supply configuration against the manufacturer datasheet. Keep analog traces short, provide a stable supply reference, and account for charge injection and off-state leakage when switching high-impedance or very low-amplitude sources. This product page combines the manufacturer electrical characteristics, package information, pin-compatible alternatives, application guidance, and practical design notes to support faster component selection and board-level implementation.

Запрос цены Контакты
ISL8392IB - 4-Channel 35Ω SPST Analog Switch | Renesas
ISL8392IB

ISL8392IB - 4-Channel 35Ω SPST Analog Switch | Renesas

The Renesas Electronics ISL8392IB is a four-channel, 1:1 SPST CMOS analog switch with a typical on-resistance of 35 Ω, housed in a 16-SOIC package. It supports low-voltage single-supply operation from +2 V to +12 V or dual-supply operation from ±2 V to ±6 V. Four independent switches provide flexible signal routing for precision analog, measurement, test, and battery-powered equipment. An analog switch is a semiconductor-controlled pass element that connects or isolates circuit nodes under digital control. The ISL8392 family belongs to the interface IC hierarchy: analog switch → switch/multiplexer IC → interface integrated circuit. Its SPST configuration provides one conducting path per switch rather than a multi-channel multiplexer, making it useful when each signal requires independent routing. Verified device features include a maximum charge injection of 5 pC, on-resistance matching of 300 mΩ, and crosstalk of -89 dB at 1 MHz. The family data also identifies low power consumption of 1 µW, leakage current up to 2.5 nA, turn-on time of 60 ns, turn-off time of 30 ns, and maximum on-resistance flatness of 4 Ω. These characteristics suit signal paths where fast transitions, low leakage, and controlled charge injection are important. The switch architecture is designed for low-voltage precision routing rather than high-voltage power switching. Signal amplitude, supply range, input capacitance, control-logic levels, and switched leakage must all remain within device limits. Because ISL8392IB is listed as obsolete by GlobalSpec, new production designs should account for lifecycle risk and contact Renesas regarding supported sourcing before committing an active BOM. Typical uses include battery-powered sensor acquisition, multimeter and test-equipment input routing, sample-and-hold systems, data-acquisition modules, and low-power analog signal multiplexing. The 60 ns turn-on and 30 ns turn-off values can limit settling intervals, while 2.5 nA maximum leakage helps preserve weak-source measurements between switching events. Use the 16-SOIC footprint exactly as shown in the manufacturer pinout, and observe all control pins during unused channels. Do not infer the complete pin map or absolute maximum ratings from distributor snippets alone. Validate signal integrity, supply sequencing, and injected charge in the final analog channel because package parasitics and PCB capacitance can materially affect precision measurements. This page consolidates verified lifecycle, electrical, package, cross-reference, and sourcing information with engineering guidance that extends beyond a distributor listing. It also clearly separates confirmed data from parameters that still require datasheet or internal-inventory confirmation.

Запрос цены Контакты
ISL8392IB-T - 4-Channel SPST Analog Switch | Renesas
ISL8392IB-T

ISL8392IB-T - 4-Channel SPST Analog Switch | Renesas

The Renesas Electronics ISL8392IB-T is a CMOS quad analog switch with four independent single-pole single-throw channels in a 16-SOIC package. Each channel provides a 1:1 signal configuration, operates from a single +2 V to +12 V supply or a dual ±2 V to ±6 V supply, and has a maximum specified on-resistance of 35 ohms. The device is optimized for low-power signal routing in battery-powered and space-constrained equipment. An analog switch is an integrated semiconductor that routes electrical signals between circuit nodes under digital control. The ISL8392IB-T belongs to the analog switch, multiplexer and demultiplexer hierarchy, where it functions as four independent SPST switches. Compared with mechanical relays, it can switch faster, consume less power, and occupy less circuit-board area. Unlike a multiplexer that combines several inputs onto one output, its 1:1 configuration preserves a separate signal path for every channel. Low power consumption is a principal feature of the ISL8392IB-T. The manufacturer specifies approximately 1 µW power consumption for battery-powered applications, with maximum leakage current of 2.5 nA. This low leakage helps preserve battery capacity when a switched node is inactive. The four switch channels also provide on-resistance flatness of up to 4 ohms, helping maintain consistent signal behavior across the operating range. Fast switching makes the part suitable for time-sensitive signal paths. The specified turn-on time is 60 ns and turn-off time is 30 ns. These values are especially useful when the device selects between sensors, measurement channels, communication paths, or test points under digital control. Because analog switches conduct rather than regenerate signals, input bandwidth, on-resistance, capacitance, leakage, and off-state isolation remain important system-level considerations. Typical uses include battery-powered instrumentation, portable measurement equipment, automated test systems, sample-and-hold front ends, sensor selection circuits, and communication routing. The device can operate from a single supply for low-voltage systems or from dual supplies when bipolar signals must be switched. Its 16-SOIC package supports conventional surface-mount assembly while providing four independently controlled switches in a modest board area. A practical design should verify the signal amplitude against the selected supply configuration, place decoupling capacitance close to the supply pins, and keep high-speed routes short to minimize parasitic capacitance. Control inputs should be driven only with levels compatible with the operating supply. Check the datasheet pin-description and switching tables before assigning control states or routing a signal through an inactive channel.

Запрос цены Контакты
ISL8392IBZ - Quad SPST Analog Switch | Renesas Electronics
ISL8392IBZ

ISL8392IBZ - Quad SPST Analog Switch | Renesas Electronics

Renesas Electronics ISL8392IBZ is a low-voltage CMOS analog switch containing four independent single-pole single-throw channels in a 16-SOIC package. Designed for single-supply operation from +2 V to +12 V, it also supports dual-supply operation from ±2 V to ±6 V. Key switching characteristics include 60 ns tON, 30 ns tOFF, 2.5 nA maximum leakage current, and 4 Ω maximum on-resistance flatness. These characteristics make the device suitable for routing low-voltage analog signals where low power consumption, fast transitions, and compact implementation are important. An analog switch is an integrated semiconductor device that connects or disconnects an analog signal path under digital control. The ISL8392IBZ belongs to the broader hierarchy of analog switches, multiplexers, interface ICs, and signal-routing semiconductors. Unlike a mechanical relay, it can operate rapidly with low control power and without mechanical contact wear. Its four SPST channels can route signals independently, making the device useful in battery-powered instrumentation, test systems, sample-and-hold circuits, and peripheral-selection networks. The switch's CMOS construction supports low power consumption of approximately 1 µW and maximum leakage of 2.5 nA. Fast 60 ns turn-on and 30 ns turn-off times reduce the dead time when changing signal paths. Maximum on-resistance flatness of 4 Ω helps limit gain or timing variation across the operating voltage range. The single- and dual-supply flexibility also allows the same device to be used in grounded positive-rail systems or bipolar-style signal environments, subject to the absolute maximum ratings and logic-level requirements in the datasheet. The ISL8392 family uses CMOS circuitry to achieve low on-state resistance and low off-state leakage. Its four channels are designed for precision signal routing, where the control inputs determine whether each common terminal is connected to its corresponding input. Because an analog switch can introduce resistance, capacitance, charge injection, and off-state leakage into a signal path, the application must account for source impedance, settling time, control timing, and the voltage range applied to each terminal. Typical uses include battery-powered test equipment, automated measurement systems, signal multiplexing, audio path routing, data acquisition modules, and industrial control circuits. The device is particularly useful when several low-level signals must be selected electronically without using multiple discrete relay packages. For dual-rail designs, the ±2 V to ±6 V operating range provides compatibility with bipolar analog signals, while single-supply designs support systems operating between +2 V and +12 V. Design the input and control pins so that every voltage remains within the limits specified by the manufacturer datasheet. Keep sensitive signal traces short, provide a stable return path, and account for control-pin timing when the selected channel must settle before measurement. The 16-SOIC package supports conventional surface-mount assembly, but pin-compatible substitution still requires verification of electrical limits, logic thresholds, control polarity, and switching behavior. This product page combines the manufacturer specifications, package information, functional guidance, comparison criteria, and design considerations needed to evaluate the ISL8392IBZ. It also distinguishes verified same-family options from unsupported substitutes, helping engineers make a replacement decision without assuming that similar switch counts or package names guarantee pin-to-pin compatibility.

Запрос цены Контакты
ISL8393IB - 4-Channel SPST Analog Switch | Renesas
ISL8393IB

ISL8393IB - 4-Channel SPST Analog Switch | Renesas

Renesas Electronics ISL8393IB is a low-voltage, precision quad SPST analog switch with four independently controlled channels, low on-resistance, low leakage, and fast switching. It operates from a single +2 V to +12 V supply or from a dual ±2 V to ±6 V supply. The device is supplied in a 16-pin SOIC package, and the family specification identifies 35 ohm maximum on-resistance, 1 micro watt power consumption, 2.5 nA maximum low leakage, 60 ns typical turn-on time, and 30 ns typical turn-off time. An analog switch is an electronic routing component that connects or disconnects analog signals under digital control. A single-pole single-throw, or SPST, switch provides one controlled signal path. The ISL8393 combines four such paths in one package, making it useful for signal routing, test and measurement systems, data acquisition equipment, battery-powered instruments, and communication equipment. In the component hierarchy, it is an analog switch, also described as a CMOS analog switch or interface IC. The four separately controlled channels provide independent signal-path selection. The Renesas family page identifies pin-compatible replacements for the Maxim MAX391 through MAX393 family and for the DG411, DG412, and DG413 families. Its low 1 micro watt power consumption is particularly valuable in battery-operated equipment, while the 2.5 nA maximum leakage specification helps preserve sensor and measurement accuracy when a channel is disconnected. Switching performance is optimized for short transition intervals: the family specification lists 60 ns typical turn-on time and 30 ns typical turn-off time. The 35 ohm maximum on-resistance is suitable for general low-voltage signal-routing applications where resistance variation and leakage are more important than very low ohmic values. A 1 ohm channel-to-channel resistance-matching specification helps preserve balance between channels in matched systems. Typical uses include battery-powered test equipment, portable measurement systems, communication equipment, and analog signal multiplexing arrangements. The wide single- and dual-supply ranges allow the same device family to operate from low single-cell or dual-rail systems. Control signals should be compatible with the selected supply configuration, and unused control or signal pins must follow the manufacturer datasheet guidance. The principal design trade-off is on-resistance versus power and leakage performance. The ISL8393 prioritizes low power, low leakage, compact integration, and fast switching rather than ultra-low resistance. Designers should verify signal amplitude, bandwidth, charge injection, off isolation, and supply compatibility against the manufacturer datasheet before finalizing a high-precision application. This page consolidates verified family specifications, manufacturer-supported pin-compatible references, procurement data, comparison parameters, and practical engineering guidance. It distinguishes documented values from parameters that require confirmation from the full datasheet, providing a practical starting point for schematic capture, footprint selection, and replacement planning.

Запрос цены Контакты
ISL8393IB-T - Quad SPST Analog Switch | Renesas
ISL8393IB-T

ISL8393IB-T - Quad SPST Analog Switch | Renesas

Renesas Electronics ISL8393IB-T is a CMOS precision quad analog switch containing four independent single-pole single-throw channels, with a 1:1 signal configuration, 35 ohm on-resistance, and a 16-lead SOIC package. The device operates from a single +2 V to +12 V supply or from dual ±2 V to ±6 V supplies. An analog switch is an integrated circuit that routes low-frequency analog or digital signals between circuit nodes under digital control. The ISL8393IB-T belongs to the analog-switch and multiplexer hierarchy, where it sits between sensors, test points, amplifiers, converters, and system controllers. Its four SPST channels can isolate test paths, select signal sources, route instrumentation, or implement compact switching networks without using discrete mechanical relays. Key characteristics include 1 microwatt low-power operation, maximum leakage current of 2.5 nA, and a 35 ohm on-resistance. Single-supply operation simplifies systems that only provide one positive rail, while dual-supply operation allows symmetric signal routing around ground. The 1:1 configuration indicates that each channel provides direct signal connectivity rather than converting signal polarity or multiplexing unequal impedance networks. The ISL8393 series uses CMOS circuitry to provide low power consumption and low leakage. These characteristics suit battery-powered equipment, portable measurement systems, automated test equipment, and control systems where switched nodes should not draw substantial standby current. Maximum leakage of 2.5 nA helps preserve high-impedance sensor signals when a channel is disconnected, although exact signal integrity and switching-time limits should be confirmed from the manufacturer datasheet before high-speed or precision impedance designs are released. Typical applications include battery-powered sensor acquisition, automated test equipment, analog signal isolation, sample-and-hold subsystems, and instrumentation routed by a microcontroller or other digital controller. A single-supply implementation can use the IC directly from a +2 V to +12 V rail, while a ±5 V system provides headroom for bipolar signals when the device is operated within the specified ±2 V to ±6 V range. Layout should keep the analog signal traces short and provide a solid ground reference. The unused control inputs must be driven to defined logic levels so that no switch remains partially on, while supply bypassing should be placed close to the device. Signal traces should avoid routing alongside noisy switching or digital return paths, especially where the selected channel drives a high-impedance sensor. This page combines the manufacturer family specifications, package information, sourcing context, replacement analysis, comparison tables, and application guidance into one engineering-oriented reference for evaluating the ISL8393IB-T.

Запрос цены Контакты
ISL8394IB - Quad SPDT Analog Switch | Renesas Electronics
ISL8394IB

ISL8394IB - Quad SPDT Analog Switch | Renesas Electronics

Renesas Electronics ISL8394IB is a precision quad SPDT analog switch with four independently controlled switches, a 35 ohm maximum on-resistance, and a 20-pin SOIC package. It operates from a single +2V to +12V supply or from a ±2V to ±6V dual supply. Typical on-resistance is 17 ohms, while on-resistance matching between channels is 1 ohm. The device supports TTL- and CMOS-compatible control signals. An analog switch is an integrated semiconductor that routes analog signals between circuit nodes under digital control. The ISL8394 belongs to the analog-switch and multiplexer hierarchy, where an SPDT switch selects one of two signal paths per common terminal. Four separately controlled SPDT circuits provide flexible signal routing for test, measurement, communication, and battery-powered equipment. This makes the ISL8394 more useful than a single fixed multiplexer when several independent connections must be switched. Key performance characteristics include fast transition times of 50 ns for turn-on and 30 ns for turn-off. Charge injection is limited to 10 pC, helping control timing errors when the device switches low-level or high-impedance signals. Maximum leakage current at 85°C is 2.5 nA, and typical power consumption is 5 microwatts. The manufacturer also specifies a maximum on-resistance flatness of 4 ohms, providing more consistent channel resistance across the operating signal range. The device accepts single or dual power rails, which supports both conventional positive-supply designs and bipolar signal paths. Each SPDT switch has a separate control input, allowing independent routing decisions. Break-before-make operation is guaranteed, while minimum 2,000 V ESD protection per Method 3015.7 improves robustness against electrostatic discharge encountered during handling or testing. Typical uses include battery-powered instrumentation, signal-path multiplexing, automated test equipment, communication interfaces, and portable measurement systems. The low 5 microwatt power consumption and 2.5 nA maximum leakage are especially useful when preserving battery life or measuring high-impedance sources. The 20-SOIC package also supports conventional surface-mount assembly methods. Designers should account for the 35 ohm maximum on-resistance, 10 pC maximum charge injection, and control-signal timing when selecting capacitors, amplifiers, or downstream circuits. Designers should also verify the exact pin functions, supply sequence, and operating limits against the manufacturer datasheet before layout because the public web data provided for this page does not include a complete pin table. This page consolidates the verified manufacturer and distributor data for the ISL8394IB, adds application-focused engineering context, and distinguishes verified drop-in references from package or sourcing variants that should not be treated as PCB drop-in replacements.

Запрос цены Контакты
ISL8394IB-T - Quad SPDT Analog Switch, 20-SOIC | Renesas
ISL8394IB-T

ISL8394IB-T - Quad SPDT Analog Switch, 20-SOIC | Renesas

Renesas ISL8394IB-T is a precision, quad SPDT analog switch with four independently controlled 2:1 switch circuits, 17 ohm typical on-resistance, 35 ohm maximum on-resistance, and a 20-pin SOIC package. It supports single-supply operation from +2 V to +12 V and dual-supply operation from ±2 V to ±6 V. An analog switch is a semiconductor interface that routes signals between input and output terminals under digital control. The quad SPDT architecture places four independent single-pole, double-throw switches in one package, making the ISL8394IB-T suitable for signal-routing, sampling, test, measurement, and communication systems. Its wider supply range allows the same design to operate from low-voltage battery rails or split analog supplies. Key electrical characteristics include 1 ohm maximum on-resistance matching between channels, 10 pC maximum charge injection, 5 microwatt power consumption, and 2.5 nA maximum leakage current at 85 degrees Celsius. The switching times are 50 ns maximum turn-on and 30 ns maximum turn-off, while guaranteed break-before-make operation helps prevent incorrect path overlap during transitions. The device also provides 2000 V ESD protection using Method 3015.7 and is compatible with TTL and CMOS control signals. These characteristics make it especially useful when a system must switch low-level analog signals without introducing substantial resistance imbalance, charge disturbance, or excessive supply power. The manufacturer identifies the ISL8394 family as a drop-in replacement for the MAX394 family of four separately controlled SPDT switches. Typical uses include battery-powered instrumentation, multimeter and test-equipment input routing, data-acquisition systems, sample-and-hold networks, and communication interfaces. In a dual-supply analog circuit, the negative supply allows bipolar signals to be switched without shifting their reference level. In single-supply systems, the device simplifies designs that require multiple routed signal paths under microcontroller or logic-controller control. Designers should verify signal amplitude, control-logic levels, supply sequencing, and the maximum switched voltage before finalizing a board layout. Keep high-impedance traces short, provide a stable return path, and place the device so switching transients do not couple into sensitive analog nodes. Its low power consumption and low leakage are valuable in battery-operated equipment, although ESD protection and signal-path isolation remain essential in exposed applications. This product page combines the ISL8394 family electrical characteristics, supply limits, package information, and switching specifications with application guidance, comparison parameters, and practical design notes. It also distinguishes verified drop-in options from generic cross-reference results, helping engineers evaluate PCB compatibility without confusing a similar part with a guaranteed pin-to-pin replacement.

Запрос цены Контакты