Микроконтроллеры

Товары (18157)

S9S12H128J1VPVER - 16-Bit 50MHz 128KB Flash MCU | NXP
S9S12H128J1VPVER

S9S12H128J1VPVER - 16-Bit 50MHz 128KB Flash MCU | NXP

The NXP S9S12H128J1VPVER is a 16-bit HCS12 automotive-qualified microcontroller operating at 50 MHz, with 128 KB of flash memory and a 112-pin LQFP package measuring 20 mm by 20 mm. It operates across the -40°C to +105°C temperature range and is identified with the VPVER package designation. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. This HCS12 MCU belongs to the embedded-controller hierarchy: 16-bit MCU → HCS12 microcontroller → embedded processing → automotive electronics. It is intended for systems requiring deterministic embedded control, serial communication, timing, and analog or digital interface functions. The verified source data identifies the HCS12 CPU, 16-bit architecture, 50 MHz operating frequency, and 128 KB flash organized as 128K × 8. The 112-LQFP package supports surface-mount assembly, while the automotive qualification and -40°C to +105°C rating suit equipment operating across extended temperature conditions. Exact RAM, supply voltage, peripheral list, and memory endurance are not supplied and are therefore not inferred. Within an embedded design, the MCU can serve as the central controller for automotive body, chassis, powertrain-adjacent, sensor, and communication subsystems. The 128 KB program-memory capacity provides room for boot code, application logic, diagnostics, and communication handlers. The 50 MHz clock rating enables time-sensitive control tasks, although real timing performance must be evaluated against the selected peripherals, bus architecture, memory wait states, and firmware workload. Typical integration places the MCU beside power regulation, sensing, actuation, and communication circuitry. Inputs should be checked against the manufacturer electrical limits, while unused pins must follow the official pin-multiplexing and termination guidance. Because only the summarized distributor information was supplied, no detailed pin names, peripheral assignments, or electrical limits should be inferred without the official device documentation. When sourcing this part, verify the exact package, temperature grade, flash configuration, qualification status, and ordering suffix. The supplied data shows distributor listings from Rochester Electronics and NXP, but it does not provide a manufacturer datasheet URL, lifecycle declaration, price, or confirmed production status. This page therefore separates verified facts from unavailable technical and commercial fields rather than extrapolating them.

Запрос цены В наличии
S9S12H128J2VFVE - 16-bit S12 MCU 128KB Flash 50MHz | NXP
S9S12H128J2VFVE

S9S12H128J2VFVE - 16-bit S12 MCU 128KB Flash 50MHz | NXP

The NXP S9S12H128J2VFVE is a 16-bit HCS12 microcontroller built around the standard S12 core, integrating 128KB of on-chip Flash and operating at 50MHz. Housed in a 144-pin LQFP package, it is automotive-qualified and rated for the -40C to +105C industrial/automotive temperature range, making it well-suited for body and chassis applications that demand deterministic 16-bit performance. A microcontroller (MCU) is a single-chip computer containing a CPU, program and data memory, and a set of on-chip peripherals. The HCS12 core is an enhanced evolution of the HC11 architecture with a 16-bit data path, a richer instruction set, and higher code efficiency for embedded control. Within the broader semiconductor taxonomy, this part sits as a microcontroller -> embedded processor -> semiconductor device. Key features include 128KB Flash for application code and a 50MHz CPU core, full CAN and LIN connectivity for in-vehicle networking, an enhanced capture/timer and PWM module (ECT) for motor and actuator control, and a 10-bit analog-to-digital converter for sensor acquisition. The 144-LQFP footprint exposes a wide peripheral set: SCI/SPI, I2C, multiple timer channels, and a robust interrupt controller. The S12H silicon was designed for cost-sensitive automotive body controllers, HVAC panels, instrument clusters, and DC motor control nodes. Its peripheral-rich architecture lets designers replace external logic with on-chip modules, reducing BOM count while keeping deterministic interrupt latency for safety-critical loops. Typical applications include automotive body control modules (BCM), HVAC door and blower control, instrument cluster slaves, and LIN/CAN-based sensor nodes. The wide temperature range and on-chip CAN make it equally attractive for industrial PLC I/O expanders and remote sensor hubs. When designing with this part, pay attention to the 5V supply rail tolerance and provide adequate decoupling near the multiple VDD pins. Use NXP's CodeWarrior or the GCC S12 toolchain with a BDM interface for in-circuit debug, and consult the S12H reference manual for peripheral allocation to avoid conflicts on shared pins. This page synthesizes distributor pricing, NXP/Freescale part-family alternatives, and practical design notes not found in a single source, giving an engineer a one-stop reference for the S9S12H128J2VFVE.

USD $8,60 В наличии
S9S12H256J1VFV - 16-Bit 50MHz 256KB MCU | NXP
S9S12H256J1VFV

S9S12H256J1VFV - 16-Bit 50MHz 256KB MCU | NXP

The NXP Semiconductors S9S12H256J1VFV is a 16-bit HCS12 microcontroller operating at 50 MHz with 256 KB of Flash memory, 6K x 8 RAM, 85 I/O, and eight 10-bit A/D converters in a 144-LQFP 20 x 20 mm package. Its 2.35 V to 5.25 V supply range and -40°C to +105°C operating-temperature specification support industrial and embedded control designs. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and input/output interfaces. The HCS12 architecture belongs to the embedded-microcontroller hierarchy rather than a host processor: it executes firmware, reads sensors, controls actuators, and manages communication tasks in a compact industrial or automotive-adjacent control system. This S9S12H device combines a deterministic 16-bit CPU with substantial on-chip Flash and RAM for standalone embedded control. The headline configuration combines a 50 MHz core with 256 KB of Flash and 6K x 8 RAM. The distributor data also identifies 85 I/O and an 8-channel, 8x8/10-bit A/D converter block. These resources support protocol handling, timing tasks, digital control, data acquisition, and mixed signal monitoring without requiring a separate processor for many common embedded functions. The large 144-pin LQFP exposes substantially more signal connectivity than a small 32- or 64-pin microcontroller package. The S9S12H256J1VFV is identified as an HCS12 microcontroller rather than an FPGA, DSP, or analog device. Its 16-bit bus-oriented architecture is suited to embedded control logic, while its Flash memory supports field-updateable application firmware. The 85 available I/O provide a substantial interface budget for digital buses, switches, indicators, actuators, and external peripheral control signals, subject to the exact pin multiplexing and electrical limits in the manufacturer datasheet. Typical uses include industrial automation controllers, motor and motion-control equipment, sensor-acquisition systems, communications equipment, test fixtures, and embedded instrumentation. For these applications, the 50 MHz clock and 256 KB Flash configuration provide useful headroom for concurrent interrupt-driven tasks. The eight-channel 10-bit A/D converter block is particularly relevant when analog measurements must share a digital control platform. When designing a PCB around this device, use the manufacturer pinout and package drawing rather than inferring connections from the 144-pin count. Keep power, ground, decoupling, clock, reset, programming, and debug routing consistent with the datasheet. Validate analog-input conditioning, unused-pin handling, external memory timing if used, and thermal performance across the full -40°C to +105°C range. This page consolidates verified distributor specifications, datasheet-oriented procurement information, practical integration guidance, and honest replacement limits. It does not invent an official manufacturer PDF because the provided search results link to distributor and catalog pages rather than a confirmed NXP-hosted datasheet.

Запрос цены В наличии
S9S12H256J1VFVE - 16-bit HCS12 MCU, 256KB Flash, 144-LQFP | NXP
S9S12H256J1VFVE

S9S12H256J1VFVE - 16-bit HCS12 MCU, 256KB Flash, 144-LQFP | NXP

The NXP Semiconductors S9S12H256J1VFVE is a 16-bit HCS12-family microcontroller built around the HCS12 CPU core, delivering 50 MHz maximum bus clock performance, 256 KB of on-chip FLASH program memory, 12 KB of data RAM, and 4 KB of data EEPROM, all integrated in a 144-pin LQFP package qualified to the -40 °C to +105 °C automotive temperature range. An automotive-grade microcontroller (MCU) is a microcontroller that has been designed, characterized, and qualified to operate reliably in the harsh electrical and thermal environments of a vehicle. Within the broader product hierarchy, MCUs sit inside the Integrated Circuits category; the S9S12H256J1VFVE specifically belongs to the 16-bit HCS12 sub-family of NXP/Freescale S12 microcontrollers, which are widely deployed in body, chassis, and powertrain electronic control units (ECUs). The HCS12 core is a CISC architecture with full 16-bit data paths, and the part name's suffix 'H256' indicates 256 KB of FLASH, while 'J1VFVE' decodes to LQFP-144 package, automotive grade, tape-and-reel packaging. Key features include 256 KB FLASH, 12 KB RAM, 4 KB EEPROM, 50 MHz maximum CPU clock, a PLL block for adjustable speed/power trade-offs, multiple timers including a 16-bit Enhanced Capture Timer and an 8-bit Pulse-Width Modulator (PWM) module, an MSCAN (CAN 2.0 A/B) controller, an SPI peripheral, an asynchronous/synchronous SCI serial interface, plus 12 general-purpose I/O pins with interrupt and wake-up capability from STOP or pseudo-STOP modes. The 144-pin LQFP footprint exposes all major buses and analog inputs for body-controller and instrument-cluster applications. The internal bus matrix is fed by an on-chip PLL that allows the bus clock to be derived from a low-frequency external crystal, reducing electromagnetic emissions and quiescent current. ECC on the FLASH array and a separate EEPROM block allow robust in-field parameter storage, which is required for adaptive automotive software. The HCS12 core executes CISC instructions in 1-5 bus cycles, providing deterministic interrupt latency for real-time control loops. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, lighting controllers, door/seat modules, and industrial CAN nodes where a 16-bit automotive MCU is required. The part is also used in legacy industrial PLCs and stepper/servo controllers that already have an HCS12 firmware base. The wide -40 °C to +105 °C automotive temperature range and on-chip CAN make it suitable for in-cabin and under-hood controllers. When designing with this part, provide a 5 V-tolerant decoupling network on each VDD/VSS pair, route the ECLK/XIRQ/IRQ reset chain with short traces, and use the internal PLL with a 4 MHz-16 MHz crystal to derive the 50 MHz bus clock. Always enable the COP watchdog and configure the MSCAN baud rate using a 16 MHz oscillator reference for CAN 2.0B operation at 1 Mbit/s. This page synthesizes NXP/Freescale distributor pricing, drop-in LQFP-144 alternatives from the S9S12H and S12X families, automotive-grade compliance notes, and practical design guidance that go beyond the manufacturer datasheet.

USD $10,50 В наличии
S9S12H256J1VFVER - 16-Bit 256KB MCU 50MHz | NXP
S9S12H256J1VFVER

S9S12H256J1VFVER - 16-Bit 256KB MCU 50MHz | NXP

The NXP S9S12H256J1VFVER is a 16-bit HCS12 CISC microcontroller operating up to 50 MHz, with 256 KB of flash memory and a 144-pin QFP package. The verified listing identifies automotive-qualified construction for operation from -40°C to +105°C. Its 16-bit architecture, standard on-chip peripherals, and broad I/O capability target embedded control, automotive, and industrial applications requiring deterministic control performance and substantial program memory. A microcontroller is a semiconductor device that integrates a CPU core, memory, I/O ports, timers, communication interfaces, and other peripherals into one embedded-control platform. The S9S12 family belongs to the HCS12 16-bit MCU hierarchy and is designed to support both control loops and communication-oriented embedded systems. A phase-locked loop allows power consumption and performance to be adjusted, while full 16-bit data paths simplify arithmetic operations in control and monitoring systems. The key verified features are a 50 MHz maximum operating frequency, 256 KB of flash, 16-bit CPU architecture, 144 QFP packaging, and an extended -40°C to +105°C temperature range. The device also provides 12 general-purpose I/O pins with interrupt and wake-up capability from STOP mode, according to the NXP product-page information associated with the S9S12H256 family. These characteristics make the MCU suitable for automotive body and chassis electronics, industrial controllers, and other embedded systems operating in demanding thermal environments. The HCS12 CPU core uses a CISC-style architecture and provides full 16-bit data paths. Its integrated PLL supports configurable performance and power-state management, which helps designers balance throughput against current consumption. The integrated flash memory supports firmware storage, while the peripheral set provides the foundation for digital I/O, timing, serial communication, interrupts, and low-power control. Exact peripheral counts, voltage ratings, electrical limits, and package dimensions require confirmation in the manufacturer datasheet. Typical applications include automotive body-control modules, instrument-cluster electronics, actuator controllers, industrial control panels, and compact embedded systems. The extended temperature range supports harsh operating environments, while the 144-pin package provides access to the device's peripheral and I/O resources. The 50 MHz CPU speed is useful for coordinating multiple real-time tasks, but designers should confirm clock, memory, and interrupt requirements against the complete device documentation. A key design consideration is validating the exact electrical limits, peripheral multiplexing, and pin assignments before schematic capture. Because the available verified data does not include the complete pinout, power-supply range, or detailed memory map, those values should be taken directly from the official NXP datasheet rather than inferred. This product data combines verified manufacturer and distributor information with application guidance, engineering caveats, and a strict evidence trail. Pricing, lead time, lifecycle status, and unavailable technical parameters are not asserted when they are not present in the supplied data.

Запрос цены В наличии
S9S12H256J1VFVR - 16-Bit 50MHz 256KB MCU | NXP
S9S12H256J1VFVR

S9S12H256J1VFVR - 16-Bit 50MHz 256KB MCU | NXP

The NXP Semiconductors S9S12H256J1VFVR is a 16-bit HCS12 automotive microcontroller operating at 50 MHz, with 256 KB of flash memory and a 144-LQFP 20 mm by 20 mm package. The verified distributor listing also identifies 2.5 V or 5 V automotive operation. These headline specifications place the device in the HCS12 family of 16-bit MCUs, within the broader embedded microcontroller and semiconductor hierarchy. A microcontroller integrates a processor core, nonvolatile program memory, data memory, peripherals, and communication interfaces into one embedded-control component. In this case, the HCS12 platform is suitable for automotive body, chassis, comfort, gateway, and distributed-control systems where a dedicated MCU must execute control software and manage digital inputs and outputs. The 50 MHz clock provides substantially more instruction throughput than an 8-bit MCU, while 256 KB of flash provides dedicated space for application code, calibration data, and diagnostic routines. The S9S12H256J1VFVR is identified as an automotive MCU and is supplied in a 144-pin LQFP package. The 144-pin count offers more external interface and power options than smaller 16-bit packages, which can help when a design requires multiple communication channels, analog inputs, timer outputs, or control signals. Tape-and-reel ordering is indicated by the distributor listing. Detailed RAM capacity, peripheral inventory, operating-temperature limits, flash endurance, and electrical maximums are not present in the supplied evidence and therefore remain unverified here. At 50 MHz with 256 KB of program flash, this device is positioned for embedded automotive workloads that need more control headroom than an entry-level 8-bit MCU. It can serve as the central controller for actuator logic, sensor aggregation, body-control modules, or communication gateways, provided the complete peripheral set and electrical limits are checked against the manufacturer datasheet before design release. Software compatibility should likewise be confirmed through the device errata, reference manual, and automotive qualification documentation rather than inferred from the orderable MPN alone. The most important design consideration is package and firmware validation. A 144-LQFP footprint is relatively large and requires careful PCB escape routing, decoupling, ground planning, and assembly-process control. The verified distributor material confirms the package family and core attributes but does not provide the complete pin map, so engineers must obtain the official documentation before assigning signals or designing the land pattern. Firmware should also be qualified against the exact silicon revision and any applicable errata. This page consolidates the verified distributor identity, core performance, memory, package, voltage-marketing information, sourcing context, and replacement constraints for S9S12H256J1VFVR. It separates confirmed specifications from missing technical fields and does not present unverified pin, peripheral, temperature, or lifecycle claims as facts. Contact XAIPART for current quotation, traceability, availability, and source inspection requirements.

Запрос цены В наличии
S9S12H256J1VPVER - 16-Bit 50MHz 256KB Flash MCU | NXP
S9S12H256J1VPVER

S9S12H256J1VPVER - 16-Bit 50MHz 256KB Flash MCU | NXP

The NXP Semiconductors S9S12H256J1VPVER is a 16-bit automotive-qualified microcontroller with a 50 MHz S12 core, 256 KB flash memory, and a 112-LQFP 20 x 20 mm package. According to the verified distributor data, it operates from -40°C to +105°C and is identified as an S12 microcontroller with 256 bytes represented as 256 x 8 flash organization. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals into one integrated circuit. The S9S12H256J1VPVER belongs to the S12 family and provides embedded control for automotive and industrial systems requiring deterministic digital control, communication, timing, and peripheral integration. Its 50 MHz core provides a useful balance between processing capability, power consumption, and system complexity for embedded applications. Verified listing data highlights the device as a 16-bit MCU with 256 KB flash, 50 MHz operation, 112-LQFP packaging, and automotive qualification. The package provides 112 external leads, making it appropriate for designs that require a conventional leaded package rather than a fine-pitch BGA. The listed operating temperature range of -40°C to +105°C supports use across extended industrial and automotive temperature environments, subject to the complete manufacturer datasheet and application requirements. The S9S12H256J1VPVER is suitable for vehicle body-control modules, sensor interfaces, actuator controllers, instrumentation, industrial automation, and embedded communication equipment. Its 256 KB flash capacity allows embedded firmware, configuration data, boot code, and application logic to be stored locally. The 50 MHz operating frequency supports responsive control loops and event-driven peripheral handling when paired with correctly selected external components. When selecting this MCU, verify the exact pin functions, electrical limits, peripheral set, memory organization, clock configuration, and automotive qualification requirements in the manufacturer datasheet before layout or firmware deployment. Because this product data is based on verified distributor and search-result records, unprovided electrical details remain intentionally marked for data acquisition rather than estimated. This page combines verified S9S12H256J1VPVER specifications, sourcing information, structured product data, and practical engineering context to support component identification, procurement, comparison, and design review.

Запрос цены В наличии
S9S12H256J2VFVER - 16-bit 50MHz 256KB MCU | NXP | Automotive
S9S12H256J2VFVER

S9S12H256J2VFVER - 16-bit 50MHz 256KB MCU | NXP | Automotive

The NXP S9S12H256J2VFVER is a 16-bit HCS12 automotive-qualified microcontroller with a 256KB (256K x 8) FLASH program memory, 12KB RAM, 2KB EEPROM, and a 50MHz bus-derivable clock from an S12 core, housed in a 144-pin LQFP (20x20 mm) package rated from -40C to +105C. A microcontroller unit (MCU) is a single-chip embedded computer that integrates a processor core, non-volatile program memory, data memory, and peripherals such as timers, communication interfaces, and analog converters on one die. Within the hierarchy of semiconductors, the MCU sits at the heart of embedded control systems: a 16-bit MCU like the HCS12 family occupies the segment between 8-bit controllers and 32-bit ARM-based processors, offering wider data paths and higher computational throughput while retaining the deterministic, single-cycle-friendly architecture favored in real-time control. The S9S12H256J2VFVER belongs to the MC9S12H128/HCS12 family, composed of standard on-chip peripherals built around the HCS12 CPU with full 16-bit data paths throughout. An integrated PLL circuit allows power consumption and performance to be adjusted dynamically, letting designers trade clock speed against current draw. Twelve additional general-purpose I/O pins feature interrupt and wake-up capability from STOP or WAIT low-power modes, which is essential for battery-backed or intermittently active automotive nodes. Automotive qualification (per the S9S12 prefix and -40/+105C ambient rating) makes this part suitable for under-hood-adjacent and body-electronics environments where AEC-Q-grade reliability is expected. The 256KB FLASH supports in-system reprogramming for calibration updates, and the 2KB EEPROM preserves parameters across power cycles without external memory. The 144-pin LQFP provides generous port count for clusters of switches, sensors, lamps, and communication transceivers. Typical applications include automotive body control modules, instrument clusters, door and seat control units, HVAC controllers, and industrial machinery requiring a wide temperature range and large I/O count. Its 50MHz performance headroom accommodates complex state machines and CAN/LIN protocol stacks. Design considerations: plan the clock tree around the PLL for EMC compliance, and budget RAM carefully since 12KB constrains large buffers; the VFV temperature suffix demands derating of junction temperature at high ambient. This page synthesizes distributor pricing context, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet, with all core specifications verified against NXP product data as of 2026-10-18.

Запрос цены В наличии
S9S12HA32J0CLL - 16-bit 32MHz 32KB Flash MCU | NXP
S9S12HA32J0CLL

S9S12HA32J0CLL - 16-bit 32MHz 32KB Flash MCU | NXP

The NXP S9S12HA32J0CLL is a 16-bit HCS12 automotive-qualified microcontroller running at 32 MHz with 32 KB flash and 2 KB RAM, housed in a 100-pin LQFP (14x14 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals onto one die, forming the lowest level of the embedded-computing hierarchy: semiconductor -> integrated circuit -> microcontroller unit. The S12HY family belongs to the HCS12 16-bit CISC lineage originally developed by Freescale Semiconductor (now NXP Semiconductors), widely used in cost-sensitive automotive body electronics. Key features include a 32 MHz HCS12 core with 16-bit CISC architecture, 32KB (32K x 8) flash program memory, 2 KB RAM, and 80 general-purpose I/O lines. Connectivity peripherals cover EBI/EMI, I2C, IrDA, LINbus, SCI, and SPI, while on-chip peripherals include an LCD driver, motor-control PWM, POR, PWM, and a watchdog timer (WDT). These integrated drivers reduce external component count in instrument-cluster designs. The S12HY family differentiates itself through customized automotive features such as the integrated LCD driver and stepper-motor driver, allowing direct drive of gauge needles and segment displays without companion ICs. The device operates from a 5V supply across -40C to +85C and carries automotive qualification, targeting emerging-market vehicle platforms where cost per cluster is critical. Typical applications include automotive instrument clusters with LCD segments and stepper-motor gauges, CAN/LIN networked body-control nodes, and industrial HMI panels requiring segment LCD drive. Design consideration: confirm flash sizing early - at 32 KB, code headroom is limited once CAN/LIN stacks and LCD refresh routines are included; larger-family parts are pin-compatible upgrade paths. This page synthesizes distributor pricing context, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Запрос цены В наличии
S9S12HN64J3VAA - 16-bit S12 MCU, 64KB Flash, 50MHz, QFP-80 | NXP
S9S12HN64J3VAA

S9S12HN64J3VAA - 16-bit S12 MCU, 64KB Flash, 50MHz, QFP-80 | NXP

The NXP S9S12HN64J3VAA is a 16-bit HCS12-family microcontroller built around the S12 CPU core, integrating 64KB of on-chip Flash, 50MHz maximum bus frequency, 85 general-purpose I/O lines, and AEC-Q100 automotive qualification, all packaged in an 80-pin QFP (QFP 80, gull-wing lead form). An MCU (microcontroller) is a single-chip computer that integrates a CPU core, program and data memory, plus a configurable set of peripherals (timers, ADC, communication controllers, GPIO) onto one die. The S12 family sits in the broader taxonomy MCU -> 16-bit microcontroller -> automotive microcontroller -> HCS12 family -> NXP (formerly Freescale) S12H sub-family. Its role in the system hierarchy is to consolidate deterministic real-time control, on-board non-volatile storage, and a rich peripheral set into one automotive-qualified component, eliminating the need for an external memory bus and reducing BOM count. Key features that define this part include 64KB of Flash program memory, 4KB of RAM, an on-chip 12-bit ADC for analog sensing, multiple timer modules supporting PWM and capture/compare, SCI/SPI/I2C serial interfaces for inter-IC communication, and a CAN 2.0 controller for in-vehicle networking. The S9S12HN64J3VAA operates across a 2.5V to 5V supply range and over the -40C to +105C automotive temperature grade, making it suitable for under-hood and instrument-cluster environments. The 80-pin QFP offers generous I/O count and good thermal performance. Technically, the S12 core implements a 16-bit Von Neumann architecture with byte-level addressing, supporting both C and assembly development under CodeWarrior and the modern S32 Design Studio toolchain. The integrated Enhanced Capture Timer (ECT) module and 8-channel 10-bit/12-bit ADC simplify sensor interface designs common in body and chassis ECUs. Background debug mode (BDM) is supported for non-intrusive in-circuit emulation. Typical applications include automotive instrument clusters, body control modules (BCM), HVAC controllers, anti-lock brake system (ABS) sensor conditioning, CAN node endpoints, and general-purpose industrial real-time control requiring automotive-grade reliability. The 50MHz CPU provides sufficient headroom for sensor-fusion and PWM-heavy motor control loops. When designing with the S9S12HN64J3VAA, follow NXP application note AN2400 (S12 oscillator and clocking) for crystal selection and PCB layout. Place VDD/VSS decoupling capacitors within 5mm of each supply pin pair, and route the BDM interface to a 6-pin header for firmware development and field service. This page synthesizes verified distributor stock levels, drop-in same-package alternatives, parametric comparisons, and practical design notes not found in the standalone manufacturer datasheet.

USD $9,75 В наличии
S9S12HY32J0MLH - 16-bit HCS12 MCU, 32KB Flash, 32MHz | NXP
S9S12HY32J0MLH

S9S12HY32J0MLH - 16-bit HCS12 MCU, 32KB Flash, 32MHz | NXP

The NXP S9S12HY32J0MLH is a 16-bit HCS12 CISC microcontroller with 32KB Flash, 2KB RAM, 50 I/O pins, integrated LCD/stepper motor driver peripherals, and 32MHz CPU clock, housed in a 64-pin LQFP (10x10 mm) package qualified to AEC-Q100 automotive grade (-40°C to +125°C). It belongs to NXP's S12HY family of CAN MCUs designed for cost-effective instrument cluster and human-machine interface (HMI) applications. Key features include 32KB on-chip Flash program memory (32K x 8), 2KB SRAM data memory, a built-in LCD driver supporting segment-style displays commonly found in instrument clusters, a stepper motor driver for gauge movements, an integrated CAN 2.0 controller for in-vehicle networking, and a 16-bit timer/PWM module. The device operates from a 5V supply (with 3.3V I/O variants in the same family) and uses an internal oscillator for clock generation. From an architectural standpoint, the S9S12HY32J0MLH leverages the proven HCS12 CPU core with CISC instruction set, enhanced interrupt handling, and BDM (Background Debug Mode) for non-intrusive in-circuit debugging. The 32MHz bus clock supports deterministic real-time control loops required for stepper motor driving and signal acquisition. On-chip peripherals are mapped to fixed memory addresses for predictable interrupt latency. Typical applications include automotive instrument clusters (speedometer, tachometer, fuel gauges), body control modules, HVAC panels, seat control units, and industrial HMI panels with LCD readouts. The integrated stepper motor driver and LCD driver eliminate the need for external driver ICs, reducing BOM cost and PCB area. When designing with this device, ensure the 5V analog supply is well-decoupled near the AVSS pin, use proper ESD protection on exposed HMI connectors, and follow NXP AN3300 layout recommendations for mixed-signal automotive PCBs. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone - useful for engineers designing around long-lifecycle automotive parts and procurement teams seeking lifecycle risk mitigation options.

USD $4,80 В наличии
S9S12HY32J0VLL - 16-bit S12 MCU 32KB Flash 32MHz | NXP
S9S12HY32J0VLL

S9S12HY32J0VLL - 16-bit S12 MCU 32KB Flash 32MHz | NXP

The NXP Semiconductors S9S12HY32J0VLL is a 16-bit HCS12-family microcontroller built around the S12 CPU core, integrating 32KB of on-chip Flash, 2KB of RAM, and a 32MHz bus clock in a 100-pin LQFP (14x14 mm) surface-mount package. The part is rated for -40C to +105C and qualified per NXP's automotive-grade flow, targeting instrument-cluster and body-electronics designs. A 5V-tolerant mixed-signal front end and on-chip peripherals (LCD driver, stepper-motor predriver, MSCAN, SCI/SPI) round out the device. The 'V' suffix in 'J0VLL' designates the 105C automotive temperature grade and LQFP-100 package. What is an automotive 16-bit MCU? An automotive 16-bit microcontroller is a Flash-based, von-Neumann-class CISC processor designed for cost-sensitive, real-time automotive and industrial subsystems such as instrument clusters, body controllers, HVAC panels, and sensor interfaces. The HCS12 family sits in the wider NXP (formerly Freescale) S08/S12/S12X/S32K microcontroller hierarchy: 8-bit S08 -> 16-bit S12/S12X -> 32-bit S32K/Cortex-M. Compared with 32-bit Cortex-M parts, HCS12 MCUs trade raw Dhrystone throughput for lower cost, integrated LCD/stepper analog blocks, and a mature CodeWarrior/S12Z toolchain. Key differentiating features of S9S12HY32J0VLL include a 32MHz S12 core with BDM debug, up to 32KB on-chip Flash, an integrated LCD driver suitable for TN segment glass, a stepper-motor predriver that removes external H-bridges, and an MSCAN (CAN 2.0A/B) module for in-vehicle networking. The part is AEC-Q100 aligned per NXP's automotive-grade specification, and the 100-LQFP footprint gives enough I/O for cluster backlighting and switch-matrix scanning. Technically, the S12HY silicon combines the CPU12 core with a peripheral co-processor bus, an on-chip bandgap reference, and a regulated internal core voltage, allowing 5V supply operation with 3.3V GPIO logic levels through VREG. Flash endurance is rated at the typical 10k-cycle minimum, and EEPROM emulation is supported through a dedicated partition of the Flash array. The 32MHz bus speed is generated from an internal PLL fed by an external crystal or resonator. The S9S12HY32J0VLL is typically used in automotive instrument clusters, two-wheeled vehicle dashboards, HVAC control panels, and CAN-connected sensor nodes. The integrated LCD driver makes it a natural fit for monochrome TN glass up to 4x40 segments, while the stepper predriver supports gauge needles. When designing with this part, ensure the external supply decoupling follows NXP AN2624 reference design: 100nF plus 10uF bulk on VDDX/VDDR, and place the resonator within 5mm of the XTAL pins. The LCD charge-pump capacitor must be a low-leakage ceramic (C0G/NP0) to avoid contrast drift at high temperature.

USD $5,48 В наличии
S9S12HY64J0CLH - 16-Bit 32MHz 64KB Flash HCS12 MCU | NXP
S9S12HY64J0CLH

S9S12HY64J0CLH - 16-Bit 32MHz 64KB Flash HCS12 MCU | NXP

The NXP (formerly Freescale) S9S12HY64J0CLH is a 16-bit HCS12 microcontroller with 64KB Flash, 4KB RAM, and a 32MHz core speed, housed in a 64-pin LQFP package designed for automotive instrument cluster and body electronics applications. It integrates CAN, LCD driver, stepper motor driver, and LIN/J2602 interfaces in a single device, making it a system-in-package for entry-level automotive dashboards. A microcontroller (MCU) is a single-chip computer containing a CPU core, memory (Flash/RAM), and programmable peripherals. The 16-bit HCS12 family belongs to NXP's S12 automotive MCU platform, which sits in the broader taxonomy of embedded controllers -> microcontrollers -> automotive microcontrollers -> HCS12 series. The S12HY sub-family is specifically optimized for human-machine interface (HMI) subsystems including instrument clusters and body control modules. Key features include 64KB on-chip Flash memory, 4KB RAM, an LCD driver supporting segment displays, an integrated stepper motor controller for analog gauge movements, one CAN 2.0 module, LIN/J2602 SCI channels, and a 32MHz bus clock derived from an internal Phase-Lock Loop. The device operates across -40C to +85C industrial temperature range and supports background debug mode (BDM) for non-intrusive in-circuit programming. The S9S12HY64J0CLH uses the standard S12 CPU core with instruction set compatibility back to the HC11 family, simplifying migration for legacy automotive designs. Its on-chip voltage regulator supports a single 5V supply while generating internal 2.5V and 1.8V rails for the core logic, eliminating external DC-DC components. A 16-channel Analog-to-Digital Converter (ATD), PWM timers, and GPIO with interrupt capability round out the peripheral set. Typical applications include two-wheeler instrument clusters, entry-level automotive dashboards, body controllers with CAN/LIN gateways, HVAC control panels, and white-goods HMI modules. The integrated LCD and stepper motor drivers reduce external component count, directly lowering BOM cost for cost-sensitive automotive programs. When designing with this MCU, allocate the 64KB Flash budget carefully because the automotive real-time operating environment typically consumes 8-12KB for the CAN/LIN/LCD stack, leaving roughly 50KB for application code. Use BDM for production programming rather than the SCI bootloader to avoid tying up the diagnostic SCI channel. This page synthesizes distributor pricing, drop-in S12HY family alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a faster path to qualified sourcing decisions.

USD $5,85 В наличии
S9S12HY64J0VLL - 16-bit HCS12 MCU 64KB Flash 32MHz | NXP
S9S12HY64J0VLL

S9S12HY64J0VLL - 16-bit HCS12 MCU 64KB Flash 32MHz | NXP

The NXP Semiconductors S9S12HY64J0VLL is a 16-bit HCS12 automotive microcontroller with a 64KB (64K x 8) flash memory, a 32MHz S12 core, and an integrated LCD driver and stepper motor driver, housed in a 100-pin LQFP (14 x 14 mm) package and qualified for -40C to +105C automotive operation. A 16-bit microcontroller is a self-contained computing device whose arithmetic logic unit processes 16-bit words in a single instruction cycle, occupying the middle of the embedded hierarchy between 8-bit MCUs and 32-bit automotive MCUs. The HCS12 (S12) architecture, originally developed by Freescale Semiconductor and now part of NXP, is a widely adopted platform in automotive body, dashboard, and control applications where proven toolchains and long lifecycle support matter. Key features of this device include 64KB of on-chip flash program memory for application code, a 32MHz bus-capable S12 core, an integrated LCD driver that reduces external component count in gauge designs, and a dedicated stepper motor driver for gauge pointer actuation. CAN and LIN/J2602 communication interfaces support in-vehicle networking, which is essential for modern instrument clusters that must exchange diagnostic and driving data with the vehicle network. Technically, the S12HY family targets entry-level instrument clusters: the combination of LCD drive capability, stepper motor control, CAN/LIN connectivity, and automotive qualification on a single die lets designers replace multi-chip solutions with one MCU, lowering BOM cost and board area. The 100-LQFP square gull-wing package provides 100 terminals with 0.5 mm pitch, supporting standard surface-mount assembly processes. Typical applications include entry-level automotive instrument clusters with LCD and stepper-gauge outputs, generic automotive control nodes requiring CAN or LIN/J2602 communication, and industrial systems needing a robust 16-bit MCU with motor control peripherals. When designing with this MCU, plan flash sizing carefully: 64KB is sufficient for cluster firmware with LCD and gauge control, but code growth may require moving to higher-memory family variants in the same package. This page synthesizes distributor availability data, same-family drop-in alternatives, and practical design guidance not found in the manufacturer datasheet alone.

Запрос цены В наличии
S9S12HY64JOCLL - 16-bit 64KB Flash MCU | NXP Semiconductors
S9S12HY64JOCLL

S9S12HY64JOCLL - 16-bit 64KB Flash MCU | NXP Semiconductors

The NXP S9S12HY64JOCLL is a 16-bit HCS12 microcontroller from the MC9S12HY/HA family, featuring 64KB of Flash, 4KB of RAM, and a 32 MHz CPU core, housed in a 100-pin LQFP (14x14 mm) package. The part is targeted at entry-level automotive instrument clusters, body controllers, and gateway applications that need CAN, LIN/J2602, LCD segment drivers, and stepper-motor timers on a single die. According to the verified distributor listing, the device offers up to 32 MHz of HCS12 CPU performance, integrated 64KB Flash, 4KB RAM, multiple timers and analog modules, plus CAN and LIN connectivity for automotive networks. The "J0CLL" suffix decodes as temperature grade -40C to +85C with Pb-free / Pb-bismuth (LL) packaging markings per NXP ordering information. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM), peripherals (timers, ADC, communications), and interrupt logic into one package. The MC9S12HY/HA family is built around the HCS12 CPU, which belongs to the Freescale/NXP S12 product line of 16-bit automotive microcontrollers that sit hierarchically between 8-bit MCUs and 32-bit Power Architecture / ARM Cortex-M devices. Compared with general-purpose 8-bit MCUs, the HCS12 offers wider data paths, richer peripherals, and CAN/LIN support that the automotive segment demands. Key features include 16-bit CPU core, 64KB on-chip Flash, 4KB on-chip RAM, integrated LCD controller (for instrument-cluster glass driving), multiple PWM motor-driver timers, CAN and LIN/J2602 interfaces, plus built-in analog such as ATD (analog-to-digital) and SCI/SPI. The peripheral set has been tuned so a single chip can replace a cluster of discrete controllers in dashboard or body-controller designs. The wide operating voltage range (typical 5V +/-10%) and automotive temperature grade make the part robust under hood and behind-dash thermal stress. Architecturally, the S9S12HY64JOCLL uses the well-established HCS12 CPU with BDM (background debug mode) and a Flash-based memory map; this allows in-system programming and on-board debug using the standard P&E / NXP BDM tools. The integrated LCD driver and motor-timer peripherals are implemented as function-specific state machines tied to the S12 bus matrix, letting the CPU remain free for application code while the peripherals refresh segments step by step. Typical applications include entry-level automotive instrument clusters (speedometer/fuel gauges on TN/STN glass), automotive body controllers and HVAC panels, CAN/LIN slave nodes, simple stepper-motor or DC-motor drivers for cluster needles, and generic 16-bit automotive control modules. The wide temperature range and automotive grade qualification allow deployment behind the dashboard or in the engine bay periphery. When designing with this device, allocate PCB area for the 100-LQFP (14x14) footprint and decoupling, and confirm that the LCD panel you select is compatible with the duty and bias modes supported by the S12 LCD driver. Reserve one BDM port for in-circuit debug during development. This page synthesizes distributor pricing, drop-in alternatives from the MC9S12 family, application guidance, and design notes not found on individual distributor listings.

USD $8,40 В наличии
S9S12HZ128J3CAL - 16-Bit 50MHz 128KB MCU | NXP
S9S12HZ128J3CAL

S9S12HZ128J3CAL - 16-Bit 50MHz 128KB MCU | NXP

The NXP Semiconductors S9S12HZ128J3CAL is a 16-bit HCS12 automotive-qualified microcontroller operating at up to 50 MHz, with 128 KB of Flash memory and 85 I/O ports, in a 112-LQFP 20 x 20 mm package. Its 4.5 V to 5.5 V supply range and -40°C to +85°C operating range support demanding embedded automotive and industrial-control environments. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, timers, communication interfaces, analog resources, and I/O. The HCS12 MCU family belongs to the broader embedded-processor hierarchy, combining deterministic real-time control with automotive-oriented peripherals. The S9S12HZ128J3CAL is particularly suited to instrumentation, body electronics, motor control, and other control systems requiring 16-bit processing and substantial embedded Flash. The verified product information identifies a 16-bit S12 core, 128 KB Flash, 50 MHz clock operation, 85 I/O ports, and automotive qualification. Its 112-LQFP package provides a conventional leaded footprint for PCB assembly, while the 20 x 20 mm body size offers ample routing space around the device. The supplied sources also identify an automotive temperature range of -40°C to +85°C and a 4.5 V to 5.5 V operating supply range. The S12 architecture is designed for embedded control rather than host computing. Its integrated Flash allows firmware, calibration data, and application logic to be stored locally, while the 85 I/O ports support digital sensors, switches, actuators, communication transceivers, and human-interface circuitry. The 50 MHz maximum clock provides processing headroom for time-critical control loops, while the 16-bit architecture supports efficient arithmetic and register-oriented embedded programming. Typical applications include automotive instrument-cluster and body-control systems, industrial automation equipment, sensor-conditioning platforms, actuator controllers, and communication gateways. Engineers should verify all peripheral assignments, electrical limits, reset behavior, and package details against the relevant NXP datasheet before production release, especially because the retrieved distributor snippets disagree on whether the catalog clock should be interpreted as 25 MHz or 50 MHz.

USD $21,89 В наличии
S9S12HZ128J3VAL - 16-Bit HCS12 MCU, 128KB Flash, 50MHz | NXP
S9S12HZ128J3VAL

S9S12HZ128J3VAL - 16-Bit HCS12 MCU, 128KB Flash, 50MHz | NXP

The NXP S9S12HZ128J3VAL is a 16-bit HCS12 CISC automotive microcontroller with 128KB Flash, 50MHz core, and 112-pin LQFP packaging. The HCS12 core supports up to 50MHz operation across an automotive-qualified -40°C to +105°C temperature range, making this part part of NXP's S12HZ family targeted at body electronics, instrument clusters, and automotive instrumentation. The 128KB on-chip Flash is paired with on-chip SRAM and a peripheral set optimized for real-time control tasks commonly required in body and chassis modules. A 16-bit microcontroller (MCU) is a programmable processor with a 16-bit data path, a richer instruction set than 8-bit parts, and integrated peripherals such as timers, ADCs, communication controllers, and memory. The S12 family sits in NXP's automotive MCU portfolio between simpler 8-bit controllers and higher-performance 32-bit Power Architecture devices. The HCS12 CISC core (Freescale-origin, now NXP) provides deterministic interrupt response and a mature CodeWarrior / S12 toolchain, while the integrated peripherals reduce external component count. Key features of the S9S12HZ128J3VAL include 128KB of embedded Flash memory, 2.5V/5V dual-voltage operation, a 112-pin LQFP (20mm x 20mm) footprint, and an automotive qualification grade. The peripheral set integrates multiple timers, an Enhanced Capture Timer, PWM channels, analog-to-digital converters, and serial interfaces including SCI and SPI. The automotive-grade qualification (-40°C to +105°C) plus JTAG/BDM debug support make the part well-suited to long-lifecycle vehicle platforms that demand validated, traceable silicon. The HCS12 architecture combines a 16-bit CPU12 core with bus-friendly peripherals and external memory expansion capability. Internal Phase-Locked Loop (PLL) allows the bus clock to be derived from a lower-frequency crystal, reducing EMI in noise-sensitive automotive environments such as instrument cluster PCBs shared with radio receivers. An on-chip voltage regulator generates the internal core 2.5V supply from a 5V external rail, simplifying power-tree design. Typical applications of the S9S12HZ128J3VAL include automotive instrument clusters, HVAC control modules, body controllers, and general-purpose automotive node ECUs. The 50MHz core delivers sufficient computational headroom for driving segment LCD/LED displays, brushless DC motor commutation, and CAN/LIN gateway functions. Wide operating voltage also supports industrial 24V-bus equipment. Designers should verify the specific peripheral mix and package footprint against the factory datasheet before committing to layout, because the S12HZ family contains variants with different memory maps and pin allocations. Use the on-chip regulator with the recommended bypass capacitor values from the manufacturer datasheet, and ensure the BDM debug header is accessible for in-circuit programming. This page synthesizes distributor pricing, same-family drop-in alternatives, and design references not consolidated in any single datasheet, providing an aggregated decision view for engineers qualifying the S9S12HZ128J3VAL for new automotive and industrial designs.

USD $13,10 В наличии
S9S12HZ256J3CAL - 16-Bit 50MHz 256KB MCU | NXP | Automotive
S9S12HZ256J3CAL

S9S12HZ256J3CAL - 16-Bit 50MHz 256KB MCU | NXP | Automotive

The NXP Semiconductors S9S12HZ256J3CAL is a 16-bit HCS12 automotive-qualified microcontroller operating at 50 MHz, with 256 KB of embedded Flash memory in a 112-pin LQFP package measuring 20 mm by 20 mm. It is designed for automotive instrumentation and other embedded control systems requiring deterministic processing, integrated automotive peripherals, and a broad operating-temperature range of -40°C to +85°C. An HCS12 microcontroller belongs to the 16-bit microcontroller, embedded processor, and automotive semiconductor hierarchy. Devices in this family combine a processor core, Flash program memory, data memory, communication peripherals, timers, and analog or digital interfaces on one integrated circuit. The S12 core provides a different computing profile from 8-bit MCUs while remaining practical for body, cluster, instrument-panel, and automotive control applications where cost, deterministic behavior, and peripheral integration matter. The verified product information identifies a 50 MHz operating frequency, 256 KB of Flash organized as 256 bytes by 8 bits, a 112-terminal LQFP package, and an industrial temperature grade. The NXP result also identifies the component as automotive qualified. Those verified characteristics make it a strong fit for embedded automotive products requiring a 16-bit control architecture, sufficient nonvolatile firmware storage, and a surface-mount package compatible with automated manufacturing. The LQFP package provides 112 gull-wing terminals around the device and is suitable for through-board assembly and routed PCB layouts. Its 20 mm by 20 mm dimensions are larger than compact leadless packages, but this footprint offers readily accessible leads, straightforward inspection, and compatibility with conventional automotive electronics manufacturing processes. The package type is reported as LQFP with a square body in the supporting product listings. Typical automotive uses include instrument-cluster controllers, gauge and warning-indicator systems, body-control modules, actuator controllers, sensor interfaces, and compact embedded control units. For these applications, the 50 MHz processor supports responsive control logic, while the 256 KB Flash stores application code, calibration information, diagnostic routines, and startup software. The integrated nature of the device reduces the need for separate processing and interface components when the selected MCU variant provides the required peripherals. Designers should verify the exact pin multiplexing, electrical limits, oscillator requirements, memory map, peripheral availability, and package details from the manufacturer datasheet before layout or firmware release. The MPN is marked End of Life on the NXP product page, so new production should be reviewed carefully against the manufacturer’s product-change and lifecycle information. This page combines the verified distributor and manufacturer data with practical selection context, rather than assuming that a similar HCS12 device is automatically pin-compatible. This product is a 16-bit automotive microcontroller rather than a discrete power component. Its SOA data is not applicable, and the datasheet should be used for detailed application, electrical, timing, memory, and pin information.

Запрос цены В наличии
S9S12HZ64J3CAAR - 64KB Flash S12 MCU, 50MHz | NXP Semiconductors
S9S12HZ64J3CAAR

S9S12HZ64J3CAAR - 64KB Flash S12 MCU, 50MHz | NXP Semiconductors

The NXP Semiconductors S9S12HZ64J3CAAR is a 16-bit microcontroller from the MCS12H family built on the S12 core, offering 64KB of on-chip Flash memory, a 50 MHz CPU clock, and an operating temperature range of -40C to +85C, housed in an 80-pin QFP package (QFP 80, gull-wing terminals). It is targeted at industrial and automotive instrumentation designs that require a robust, deterministic 16-bit controller with integrated peripherals and a wide operating envelope. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripheral interfaces into one device. The S12 core is a 16-bit CISC architecture derived from the original HC12/HCS12 lineage, well known in automotive body electronics and industrial control for its deterministic interrupt latency, byte-level EEPROM support, and BDM (Background Debug Mode) for in-circuit debug. Within the broader taxonomy, S9S12HZ64J3CAAR belongs to the embedded processor -> microcontroller -> 16-bit MCU -> automotive-grade MCU hierarchy. Key features of this part include 64KB of Flash program memory, 50 MHz maximum bus clock, 80-pin QFP package, industrial temperature grade (-40C to +85C), and automotive qualification. The MCS12H family integrates peripherals commonly needed for instrumentation, including timers, PWM, A/D, SCI/SPI, CAN, and GPIO. The 80-pin QFP provides ample I/O for parallel displays, keypads, sensor arrays, and motor-driver interfaces that are common in body and chassis ECUs. Architecturally, the S12 core uses a 16-bit data path with a rich addressing model that supports both linear and paged memory access, with BDM allowing non-intrusive debugging. The 50 MHz clock provides 40 ns instruction-cycle time, more than adequate for sampling, closed-loop control, and CAN-based communication at 500 kbps to 1 Mbps in body-electronics networks. Typical applications include automotive instrumentation (cluster and gauge drivers), industrial motor control, CAN-based body controllers, sensor acquisition nodes, and human-machine interface (HMI) modules. The combination of Flash program memory, industrial-grade temperature range, and QFP 80 footprint suits designs that require hand-reworkable, leaded-package assembly rather than BGA or QFN. When designing with this part, engineers should use CodeWarrior or NXP's S12 compiler toolchain, plan BDM debug connector placement early, and verify that the 80-pin QFP land pattern matches the PCB footprint library. The Flash endurance and retention specifications should be reviewed against the target product's write-cycle profile. This page synthesizes distributor pricing, drop-in cross-reference alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers an at-a-glance view of specification, footprint, and lifecycle considerations.

USD $7,10 В наличии
S9S12HZ64J3CAL - 16-Bit 64KB Flash 50MHz MCU | NXP
S9S12HZ64J3CAL

S9S12HZ64J3CAL - 16-Bit 64KB Flash 50MHz MCU | NXP

The NXP Semiconductors S9S12HZ64J3CAL is a 16-bit S12-core microcontroller with 64 KB of flash memory, a 50 MHz maximum clock, and a 112-pin LQFP package. It is listed as automotive qualified and operates across the -40 °C to +85 °C temperature range. The part belongs to the S12H MCU family and is positioned for embedded automotive and industrial-control designs that need deterministic control, communication, and timing functions. A microcontroller is a programmable semiconductor that integrates a CPU, memory, peripherals, and input/output resources on one integrated circuit. In the product hierarchy, the S9S12HZ64J3CAL is an MCU, a type of embedded controller, and a member of the semiconductor category. Its 16-bit S12 core is intended for real-time control rather than general-purpose computing, making it relevant to instrument clusters, actuator controllers, body electronics, and industrial automation equipment. The supplied technical data identifies 64 KB of flash memory, a 50 MHz operating frequency, a -40 °C to +85 °C temperature range, and automotive qualification. These values support firmware storage and higher-rate control tasks, while the wide temperature range supports operation across industrial and automotive environments. The 112-pin LQFP package provides a substantial number of external connections compared with smaller MCU packages, which is useful when a design requires numerous I/O, communication, or mixed-signal resources. The verified snippets do not specify RAM size, supply voltage, ADC resolution, communication peripherals, timer counts, watchdog behavior, or detailed electrical limits. Those values must be confirmed from the official manufacturer datasheet before final schematic or firmware design. The listed product page identifies the part as end-of-life, so procurement and engineering teams should plan around availability rather than assume a long-term active roadmap. Typical design uses include automotive body and powertrain-adjacent control modules, industrial instrumentation, motor and actuator control, sensor-conditioning systems, and communication gateways. In these applications, the MCU executes control software, reads inputs, drives outputs, and coordinates timing-sensitive peripheral activity. The 112-pin package is particularly relevant when external memory, transceivers, analog interfaces, or several communication peripherals are required. For a new design, preserve the exact package footprint, power architecture, clocking strategy, and peripheral mapping until the manufacturer documentation is reviewed. A legacy automotive MCU replacement should be validated for pin compatibility, memory requirements, timing behavior, software migration, qualification status, and lifecycle risk rather than selected from the processor frequency alone. This page summarizes the verified NXP product-page and distributor information while explicitly separating unavailable technical details from confirmed values. It also highlights procurement considerations for an end-of-life component and explains why a true drop-in replacement requires manufacturer-level verification.

Запрос цены В наличии
S9S12HZ64J3VAL - 16-bit MCU, 64KB Flash, 50MHz, LQFP-112 | NXP
S9S12HZ64J3VAL

S9S12HZ64J3VAL - 16-bit MCU, 64KB Flash, 50MHz, LQFP-112 | NXP

The NXP S9S12HZ64J3VAL is a 16-bit automotive-qualified microcontroller from the MCS12H (S12H) Swordfish family, featuring an S12 CPU core running up to 50 MHz with 64 KB of on-chip Flash and a 112-pin LQFP package rated for the -40C to +105C automotive temperature range. It is designed for instrument-cluster, body-electronics and powertrain-adjacent applications where deterministic 16-bit performance and an automotive-grade qualification are required. Background Knowledge: A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), data memory (RAM), and a rich set of on-mixed peripherals such as timers, ADCs and communication controllers. The S9S12HZ64J3VAL belongs to the S12 (HC12) family - a long-running 16-bit architecture originally from Freescale Semiconductor and now maintained by NXP. Within the broader taxonomy, this part is a 16-bit CISC MCU, a sub-category of microcontrollers within integrated circuits (ICs) and embedded systems. Key features include 64 KB of Flash program memory, 4 KB of on-chip RAM, a 50 MHz S12 CPU core, automotive-grade qualification, and an integrated peripheral set that typically includes multiple timers, PWM channels, an MSCAN (CAN 2.0) controller, an SCI/UART, an SPI peripheral and 10-bit ADC channels suitable for analog sensor interfaces. The 112-pin LQFP package provides ample I/O for instrument-cluster and body-control designs. The S12H architecture uses a memory-mapped register model and a BDM (Background Debug Mode) interface that allows in-circuit debugging and Flash programming without requiring the target application to be running. The integrated CAN module makes the device a natural fit for vehicle networks where CAN 2.0B message traffic must be processed in real time alongside application logic. Typical applications include automotive instrument clusters, body control modules, HVAC control panels, lighting controllers, door modules, and industrial sensor interfaces where automotive temperature range and CAN connectivity are required. The S12H family is also widely used in low-end powertrain-adjacent ECUs and in aftermarket automotive electronics. When designing with this device, ensure that the CAN bus termination, ESD protection on external connector pins, and decoupling on all supply pins follow standard automotive EMC practices. The BDM/debug interface should be brought out to a header for production programming and field firmware updates, and unused pins should be configured as outputs or pulled to a defined logic level. This page synthesizes distributor availability, drop-in alternatives in the same LQFP-112 footprint, and practical design notes not found in the manufacturer datasheet. Pricing references are stated as of 2026-10-20.

USD $10,95 В наличии
S9S12P128J0MFT - 16-bit MCU, 128KB Flash, 32MHz | NXP
S9S12P128J0MFT

S9S12P128J0MFT - 16-bit MCU, 128KB Flash, 32MHz | NXP

The NXP S9S12P128J0MFT is a 16-bit HCS12 CISC microcontroller with 128KB of Flash memory and a 32MHz CPU core, housed in a 48-pin QFN-EP (7x7 mm) package rated for automotive -40C to +125C operation. The S9S12P128J0MFT includes an integrated CAN controller, on-chip timers, ADC, and the peripheral set expected for body electronics in vehicles. A microcontroller (MCU) is a programmable processor core with on-chip memory and peripherals designed for embedded control tasks. The HCS12 family is NXP's 16-bit architecture targeted at automotive body and chassis applications; within the broader classification tree, a microcontroller sits under microcontrollers -> microprocessors and controllers -> integrated circuits -> semiconductors. The S12P family specifically balances 16-bit performance with 8-bit pricing, enabling cost-sensitive CAN nodes such as body control modules, door modules, and lighting controllers. Key features of the S9S12P128J0MFT include 128KB of embedded Flash plus 4KB of EEPROM and 6KB of RAM, a 32 MHz bus-compatible HCS12 core, a 10-bit ADC with up to 16 channels, an enhanced capture timer (ECT), PWM modules, and an msCAN module for CAN 2.0A/B communication. The device operates from a single 5V supply with wide tolerance and supports background debug mode (BDM) plus on-chip regulator and oscillator. The 32 MHz HCS12 core delivers roughly 25 MIPS of throughput, executing CISC instructions in single cycles on average. The integrated CAN module handles both standard and extended CAN frames with hardware acceptance filtering, offloading protocol overhead from the CPU. The 48-pin QFN-EP package exposes 41 GPIO and the dedicated CAN, SPI, and SCI signals, while an exposed pad handles thermal dissipation in sealed automotive enclosures. Typical applications include automotive body control modules, CAN nodes for HVAC and instrument clusters, seat and mirror controllers, interior lighting drivers, and other in-vehicle network endpoints. The wide operating range and AEC-Q100 grade make the part attractive for under-hood and chassis nodes when paired with external transceiver ICs. When designing with this part, ensure the 5V supply decoupling uses a 100nF ceramic capacitor within 5mm of the VDD pins and a 10uF bulk capacitor on the VBAT pin. The exposed pad must be soldered to a sufficient copper pour to keep junction temperature within the 125C automotive limit at high ambient temperatures. This page synthesizes distributor pricing, drop-in alternatives within the same QFN-48 footprint, and practical design notes that augment the manufacturer datasheet with information gain.

USD $7,90 В наличии
S9S12P128J0VFT - 128KB Flash 32MHz HCS12 MCU | NXP
S9S12P128J0VFT

S9S12P128J0VFT - 128KB Flash 32MHz HCS12 MCU | NXP

The NXP S9S12P128J0VFT is a 16-bit HCS12 microcontroller IC running at 32MHz with 128KB (128K x 8) of on-chip Flash program memory, housed in a 48-pin QFN-EP (7x7 mm) package with exposed thermal pad. The S12P family delivers enhanced 16-bit S12 core performance for automotive body electronics at 8-bit MCU value, integrating CAN connectivity, robust peripherals, and automotive-grade reliability. An MCU (microcontroller unit) is a single-chip computer containing a CPU core, non-volatile program memory (Flash/ROM), volatile working memory (RAM), and a rich set of on- peripherals such as timers, ADC, communication interfaces (CAN, SPI, SCI), and GPIO. MCUs are the embedded intelligence sub-category within the semiconductor taxonomy: MCU -> microcontroller -> embedded processor -> semiconductor IC. The 16-bit HCS12 core occupies a middle ground between 8-bit legacy MCUs (PIC16, 8051) and modern 32-bit Cortex-M parts, offering higher code density, more deterministic interrupt latency, and richer peripherals than 8-bit devices while requiring less power and BOM cost than 32-bit alternatives. Key features include 128KB embedded Flash (suitable for ~64K-80K lines of typical C source code), 32MHz CPU clock yielding ~25 MIPS peak throughput, automotive-qualified temperature range of -40C to +105C, integrated CAN module (msCAN) for in-vehicle networking, multiple timer/PWM channels, 10-bit ADC, and SCI/SPI serial interfaces. The 48-QFN exposed-pad package offers low thermal resistance (~25 C/W) and a compact 7x7 mm footprint suitable for space-constrained body and chassis modules. Architecturally, the S12P family uses the HCS12 CPU with enhanced XGATE co-processor support in some variants, paired with separate Flash and EEPROM banks for EEPROM-emulation data storage, BDM (Background Debug Mode) for in-circuit programming and calibration, and a low-power STOP/WAIT mode for quiescent current management. The CAN 2.0A/B controller with hardware filtering enables CAN bus arbitration and message handling without CPU overhead, critical for body control modules that must respond to chassis network traffic within tight timing budgets. Typical applications include automotive body control modules (BCM), instrument clusters, HVAC control, lighting controllers (interior/exterior), seat/window/mirror modules, and remote keyless entry receivers. The combination of CAN interface, automotive temperature grade, and 128KB Flash makes the S9S12P128J0VFT well-suited to feature-actor body controllers that aggregate switch input and drive relay/LED outputs. When designing with this MCU, ensure the BDM debug header is brought out to a 2x3 header for in-circuit programming, place a 100nF decoupling cap on every VDDr/VSS pair, and follow NXP AN2400 PCB layout guidelines for QFN-EP land pattern and thermal via array. The exposed pad must be soldered to the central thermal copper pour to achieve the rated thermal performance. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in same-family NXP alternatives in the same 48-QFN package, and practical automotive design notes not consolidated in any single distributor listing.

USD $4,78 В наличии
S9S12P128JOMLH - 16-Bit MCU, 128KB Flash, 32MHz, LQFP-64 | NXP
S9S12P128JOMLH

S9S12P128JOMLH - 16-Bit MCU, 128KB Flash, 32MHz, LQFP-64 | NXP

The NXP S9S12P128JOMLH is a 16-bit microcontroller from the HCS12 family, featuring an S12 CPU core running at 32 MHz with 128 KB of on-chip Flash program memory in a 64-pin LQFP (10x10 mm) package. Designed for automotive and industrial embedded applications, this device integrates HCS12 peripherals including timers, A/D converters, PWM channels, and communication interfaces (SCI/SPI/IC/IIC) suitable for body electronics, industrial control, and gateway modules. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and integrated peripherals. The HCS12 family specifically targets automotive-grade 16-bit embedded control with deterministic interrupt response, byte-efficient instruction encoding, and a mature toolchain including CodeWarrior and GCC-based compilers. Within NXP's automotive MCU taxonomy, the S12P sub-family sits between the entry-level S12Q/S12H series and the higher-performance S12X/S12XE families, balancing program memory density with peripheral integration for mid-complexity automotive ECUs. Key features include 128 KB Flash program memory, 32 MHz CPU clock, automotive-qualified -40C to +125C operating range, BGND instruction for background debug mode, integrated single-wire background debug module (BDM), and multiple serial communication interfaces. The LQFP-64 package with exposed thermal pad provides robust mechanical mounting and enhanced thermal dissipation. Architecturally, the S9S12P128JOMLH uses the HCS12 CPU with a 16-bit data path, background-debug controller, and integrated memory protection. The 32 MHz bus clock enables deterministic instruction execution with 16-bit accumulator and index register architecture, supporting both C and assembly development flows. Flash memory supports in-application programming through a dedicated flash controller. Typical applications include automotive body control modules (BCM), instrument clusters, HVAC controllers, industrial sensor interfaces, CAN/J1850 gateway modules, and motor control subsystems. Its automotive qualification and extended temperature range also suit off-road vehicle electronics, agricultural machinery controllers, and heavy-duty truck body ECUs. When designing with this MCU, ensure proper decoupling (typically 100 nF ceramic + 4.7 uF bulk) near each power pin, and observe BDM pin routing to avoid noise coupling into the debug interface. The oscillator requires careful PCB placement with the load capacitors specified in the reference manual, and unused pins should be configured to a defined state to minimize quiescent current. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on any single manufacturer or distributor page, including cross-references to same-package HCS12 family variants listed in NXP's product selector and Rochester Electronics' legacy stock records.

USD $11,45 В наличии