10M25SAE144I7G - MAX 10 FPGA 25K LE 144-LQFP | Intel / Altera
Артикул: 10M25SAE144I7G ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $70.12 | $70,12 |
| 10 | $65.5 | $655,00 |
| 100 | $58 | $5.800,00 |
| 250 | $54.5 | $13.625,00 |
| 500 | $50.75 | $25.375,00 |
10M25SAE144I7G Обзор
A MAX 10 FPGA is a non-volatile, flash-based programmable logic device that combines look-up tables, embedded memory blocks, digital signal processing blocks, phase-locked loops, and on-chip analog-to-digital converters in a single die. Within the broader programmable logic taxonomy, MAX 10 sits below Cyclone 10 LP in cost and power, above CPLDs such as MAX V in density and DSP capability, and is the lowest-cost Intel FPGA family with integrated ADC and instant-on flash configuration.
Key features include 25,000 logic elements, 45 embedded 18x18 multipliers, four 12-bit 1 MSPS analog-to-digital converters, 1.2 V core voltage, and support for LVDS, LVCMOS, SSTL, and other single-ended I/O standards. The device also integrates user flash memory for non-volatile data storage, dual configuration flash for instant-on operation, and an on-chip temperature-sensing diode. The 144-LQFP exposed-pad package (E144) provides up to 101 general-purpose user I/O with a 22x22 mm body footprint suitable for industrial reflow assembly.
The MAX 10 architecture uses a logic-element fabric with adaptive logic modules, embedded SRAM blocks, and DSP blocks optimized for fixed- and floating-point operations. The integrated 12-bit ADC supports up to 17 analog input channels via the dedicated analog package pins, while the flash-based configuration memory eliminates external boot PROMs and enables sub-10 ms instant-on behavior in safety-critical industrial systems.
Typical applications include industrial control and motor drive, machine vision pre-processing, factory automation I/O expansion, video bridging and display controllers, low-cost ASIC/ASSP replacement, and distributed I/O aggregation at the edge of industrial Ethernet networks. The combination of non-volatile flash configuration, integrated 12-bit ADC, and industrial temperature grade makes it well suited for glue-logic designs with analog sensing and instant-on behavior.
When designing with this part, ensure the exposed pad is soldered to a sufficiently large copper pour for thermal dissipation and ground integrity, since high-utilization designs in the E144 package can dissipate 1-2 W. Use Intel Quartus Prime Lite for synthesis, place-and-route, and timing closure at no additional cost. Vertical migration between MAX 10 density grades within the same E144 footprint enables seamless design scaling.
This page synthesizes distributor pricing across DigiKey, Mouser, and Arrow, cross-references drop-in same-package MAX 10 alternatives, and consolidates practical design guidance not found in the manufacturer datasheet.
Аналоги без доработки для 10M25SAE144I7G — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с 10M25SAE144I7G (тот же форм-фактор и посадочное место) — отличается по Package, Core Voltage, Logic Elements (LE), Operating Temperature, User Flash Memory.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
10M16SAE144I7G
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
10M40SAE144I7G
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$57.1 / шт.
Открыть даташит →10M50SAE144I7G
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
10M25SAE144A7G
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
10M25SCE144A7G
✅ Прямая замена✓ В наличии
$47.21 / шт.
Открыть даташит →10M08SAE144I7G
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$6.8 / шт.
Открыть даташит →10M25SAE144I7G Максимальные параметры и электрические характеристики
| Series | MAX 10 |
| Family | MAX 10 FPGA |
| Logic Elements (LE) | 25,000 |
| Embedded Memory | 1,728 Kbits (691,200 bits) |
| Embedded Multipliers (18x18) | 45 |
| User I/O Pins | 101 |
| ADC Channels | 4 (12-bit, 1 MSPS) |
| User Flash Memory | Up to 1.6 Mbits |
| Process Node | 55 nm |
| Core Voltage | 1.2 V |
| Supply Voltage (Rails) | 3.0 V / 3.3 V |
| Рабочая температура | -40C to +100C (industrial, I7G grade) |
| Корпус | 144-LQFP Exposed Pad (E144), 22x22 mm |
| Тип монтажа | Surface Mount |
| Configuration Memory | Internal flash (non-volatile, instant-on) |
| Статус RoHS | Compliant |
| I/O Standards Supported | LVDS, LVCMOS, SSTL |
Конфигурация выводов 10M25SAE144I7G
| Контакт 1 | I/O — General-purpose user I/O (bank 1) |
| Контакт 2 | I/O — General-purpose user I/O (bank 1) |
| Контакт 3 | I/O — General-purpose user I/O (bank 1) |
| Контакт 4 | I/O — General-purpose user I/O (bank 1) |
| Контакт 5 | I/O — General-purpose user I/O (bank 1) |
| Контакт 6 | I/O — General-purpose user I/O (bank 1) |
| Контакт 7 | I/O — General-purpose user I/O (bank 1) |
| Контакт 8 | I/O — General-purpose user I/O (bank 1) |
| Контакт 9 | I/O — General-purpose user I/O (bank 1) |
| Контакт 10 | I/O — General-purpose user I/O (bank 1) |
| Контакт 11 | I/O — General-purpose user I/O (bank 1) |
| Контакт 12 | I/O — General-purpose user I/O (bank 1) |
| Контакт 13 | VCCIO1 — I/O bank 1 supply voltage |
| Контакт 14 | I/O — General-purpose user I/O (bank 1) |
| Контакт 15 | I/O — General-purpose user I/O (bank 1) |
| Контакт 16 | I/O — General-purpose user I/O (bank 1) |
| Контакт 17 | I/O — General-purpose user I/O (bank 1) |
| Контакт 18 | I/O — General-purpose user I/O (bank 1) |
| Контакт 19 | I/O — General-purpose user I/O (bank 1) |
| Контакт 20 | I/O — General-purpose user I/O (bank 1) |
| Контакт 21 | I/O — General-purpose user I/O (bank 1) |
| Контакт 22 | I/O — General-purpose user I/O (bank 1) |
| Контакт 23 | I/O — General-purpose user I/O (bank 1) |
| Контакт 24 | I/O — General-purpose user I/O (bank 1) |
| Контакт 25 | GND — Ground |
| Контакт 26 | I/O — General-purpose user I/O (bank 2) |
| Контакт 27 | I/O — General-purpose user I/O (bank 2) |
| Контакт 28 | I/O — General-purpose user I/O (bank 2) |
| Контакт 29 | I/O — General-purpose user I/O (bank 2) |
| Контакт 30 | I/O — General-purpose user I/O (bank 2) |
| Контакт 31 | I/O — General-purpose user I/O (bank 2) |
| Контакт 32 | I/O — General-purpose user I/O (bank 2) |
| Контакт 33 | I/O — General-purpose user I/O (bank 2) |
| Контакт 34 | I/O — General-purpose user I/O (bank 2) |
| Контакт 35 | I/O — General-purpose user I/O (bank 2) |
| Контакт 36 | I/O — General-purpose user I/O (bank 2) |
| Контакт 37 | VCCIO2 — I/O bank 2 supply voltage |
| Контакт 38 | I/O — General-purpose user I/O (bank 2) |
| Контакт 39 | I/O — General-purpose user I/O (bank 2) |
| Контакт 40 | I/O — General-purpose user I/O (bank 2) |
| Контакт 41 | I/O — General-purpose user I/O (bank 2) |
| Контакт 42 | I/O — General-purpose user I/O (bank 2) |
| Контакт 43 | I/O — General-purpose user I/O (bank 2) |
| Контакт 44 | I/O — General-purpose user I/O (bank 2) |
| Контакт 45 | I/O — General-purpose user I/O (bank 2) |
| Контакт 46 | I/O — General-purpose user I/O (bank 2) |
| Контакт 47 | I/O — General-purpose user I/O (bank 2) |
| Контакт 48 | I/O — General-purpose user I/O (bank 2) |
| Контакт 49 | I/O — General-purpose user I/O (bank 2) |
| Контакт 50 | GND — Ground |
| Контакт 51 | I/O — General-purpose user I/O (bank 3) |
| Контакт 52 | I/O — General-purpose user I/O (bank 3) |
| Контакт 53 | I/O — General-purpose user I/O (bank 3) |
| Контакт 54 | I/O — General-purpose user I/O (bank 3) |
| Контакт 55 | I/O — General-purpose user I/O (bank 3) |
| Контакт 56 | I/O — General-purpose user I/O (bank 3) |
| Контакт 57 | I/O — General-purpose user I/O (bank 3) |
| Контакт 58 | I/O — General-purpose user I/O (bank 3) |
| Контакт 59 | I/O — General-purpose user I/O (bank 3) |
| Контакт 60 | I/O — General-purpose user I/O (bank 3) |
| Контакт 61 | VCCIO3 — I/O bank 3 supply voltage |
| Контакт 62 | I/O — General-purpose user I/O (bank 3) |
| Контакт 63 | I/O — General-purpose user I/O (bank 3) |
| Контакт 64 | I/O — General-purpose user I/O (bank 3) |
| Контакт 65 | I/O — General-purpose user I/O (bank 3) |
| Контакт 66 | I/O — General-purpose user I/O (bank 3) |
| Контакт 67 | I/O — General-purpose user I/O (bank 3) |
| Контакт 68 | I/O — General-purpose user I/O (bank 3) |
| Контакт 69 | I/O — General-purpose user I/O (bank 3) |
| Контакт 70 | I/O — General-purpose user I/O (bank 3) |
| Контакт 71 | I/O — General-purpose user I/O (bank 3) |
| Контакт 72 | I/O — General-purpose user I/O (bank 3) |
| Контакт 73 | I/O — General-purpose user I/O (bank 3) |
| Контакт 74 | GND — Ground |
| Контакт 75 | I/O — General-purpose user I/O (bank 4) |
| Контакт 76 | I/O — General-purpose user I/O (bank 4) |
| Контакт 77 | I/O — General-purpose user I/O (bank 4) |
| Контакт 78 | I/O — General-purpose user I/O (bank 4) |
| Контакт 79 | I/O — General-purpose user I/O (bank 4) |
| Контакт 80 | I/O — General-purpose user I/O (bank 4) |
| Контакт 81 | I/O — General-purpose user I/O (bank 4) |
| Контакт 82 | I/O — General-purpose user I/O (bank 4) |
| Контакт 83 | I/O — General-purpose user I/O (bank 4) |
| Контакт 84 | I/O — General-purpose user I/O (bank 4) |
| Контакт 85 | VCCIO4 — I/O bank 4 supply voltage |
| Контакт 86 | I/O — General-purpose user I/O (bank 4) |
| Контакт 87 | I/O — General-purpose user I/O (bank 4) |
| Контакт 88 | I/O — General-purpose user I/O (bank 4) |
| Контакт 89 | I/O — General-purpose user I/O (bank 4) |
| Контакт 90 | I/O — General-purpose user I/O (bank 4) |
| Контакт 91 | I/O — General-purpose user I/O (bank 4) |
| Контакт 92 | I/O — General-purpose user I/O (bank 4) |
| Контакт 93 | I/O — General-purpose user I/O (bank 4) |
| Контакт 94 | I/O — General-purpose user I/O (bank 4) |
| Контакт 95 | I/O — General-purpose user I/O (bank 4) |
| Контакт 96 | I/O — General-purpose user I/O (bank 4) |
| Контакт 97 | I/O — General-purpose user I/O (bank 4) |
| Контакт 98 | GND — Ground |
| Контакт 99 | I/O — General-purpose user I/O (bank 5) |
| Контакт 100 | I/O — General-purpose user I/O (bank 5) |
| Контакт 101 | I/O — General-purpose user I/O (bank 5) |
| Контакт 102 | I/O — General-purpose user I/O (bank 5) |
| Контакт 103 | I/O — General-purpose user I/O (bank 5) |
| Контакт 104 | I/O — General-purpose user I/O (bank 5) |
| Контакт 105 | I/O — General-purpose user I/O (bank 5) |
| Контакт 106 | I/O — General-purpose user I/O (bank 5) |
| Контакт 107 | I/O — General-purpose user I/O (bank 5) |
| Контакт 108 | I/O — General-purpose user I/O (bank 5) |
| Контакт 109 | VCCIO5 — I/O bank 5 supply voltage |
| Контакт 110 | I/O — General-purpose user I/O (bank 5) |
| Контакт 111 | I/O — General-purpose user I/O (bank 5) |
| Контакт 112 | I/O — General-purpose user I/O (bank 5) |
| Контакт 113 | I/O — General-purpose user I/O (bank 5) |
| Контакт 114 | I/O — General-purpose user I/O (bank 5) |
| Контакт 115 | I/O — General-purpose user I/O (bank 5) |
| Контакт 116 | I/O — General-purpose user I/O (bank 5) |
| Контакт 117 | I/O — General-purpose user I/O (bank 5) |
| Контакт 118 | I/O — General-purpose user I/O (bank 5) |
| Контакт 119 | I/O — General-purpose user I/O (bank 5) |
| Контакт 120 | I/O — General-purpose user I/O (bank 5) |
| Контакт 121 | I/O — General-purpose user I/O (bank 5) |
| Контакт 122 | GND — Ground |
| Контакт 123 | I/O — General-purpose user I/O (bank 6) |
| Контакт 124 | I/O — General-purpose user I/O (bank 6) |
| Контакт 125 | I/O — General-purpose user I/O (bank 6) |
| Контакт 126 | I/O — General-purpose user I/O (bank 6) |
| Контакт 127 | I/O — General-purpose user I/O (bank 6) |
| Контакт 128 | I/O — General-purpose user I/O (bank 6) |
| Контакт 129 | I/O — General-purpose user I/O (bank 6) |
| Контакт 130 | I/O — General-purpose user I/O (bank 6) |
| Контакт 131 | I/O — General-purpose user I/O (bank 6) |
| Контакт 132 | I/O — General-purpose user I/O (bank 6) |
| Контакт 133 | VCCIO6 — I/O bank 6 supply voltage |
| Контакт 134 | I/O — General-purpose user I/O (bank 6) |
| Контакт 135 | I/O — General-purpose user I/O (bank 6) |
| Контакт 136 | I/O — General-purpose user I/O (bank 6) |
| Контакт 137 | I/O — General-purpose user I/O (bank 6) |
| Контакт 138 | I/O — General-purpose user I/O (bank 6) |
| Контакт 139 | I/O — General-purpose user I/O (bank 6) |
| Контакт 140 | I/O — General-purpose user I/O (bank 6) |
| Контакт 141 | I/O — General-purpose user I/O (bank 6) |
| Контакт 142 | I/O — General-purpose user I/O (bank 6) |
| Контакт 143 | I/O — General-purpose user I/O (bank 6) |
| Контакт 144 | I/O — General-purpose user I/O (bank 6) |
| Контакт EPAD | GND/thermal — Exposed thermal pad - must be soldered to ground plane |
Типичное применение
10M25SAE144I7G подходит для 6 применениеs: Industrial Motor Drive Controller, Machine Vision Pre-Processing Bridge, Factory Automation I/O Expansion, Video Bridging and Display Controller, Low-Cost ASIC/ASSP Replacement, Distributed Industrial Ethernet I/O Aggregation.
Industrial Motor Drive Controller
The 10M25SAE144I7G is well suited to industrial motor-drive controllers because its 25K logic elements can host encoder interfaces, PWM generation, and field-oriented control state machines while the integrated 12-bit ADC samples motor current and back-EMF without an external ADC IC. The non-volatile flash configuration delivers sub-10 ms instant-on, eliminating the boot delay typical of SRAM-based FPGAs in safety-critical drives. The industrial temperature grade (-40C to +100C for I7G) handles cabinet-side ambient swings near inverters. With 101 user I/O, designers can parallel several SPI encoder channels plus isolated UART/CAN links to a host PLC within the same device.
Рекомендуется
Machine Vision Pre-Processing Bridge
In machine vision pre-processing, the 10M25SAE144I7G bridges parallel image sensors to host SoCs while performing thresholding, ROI cropping, and line-buffer management. The 45 embedded 18x18 multipliers accelerate small convolutional kernels for edge detection at line rate, and the 1,728 Kbits of embedded memory hold line buffers without external SRAM. LVDS support enables direct connection to high-speed image sensors, while the 144-LQFP exposed-pad package fits in compact 22x22 mm camera modules. Quartus Prime Lite provides a free toolchain for designers prototyping vision pipelines.
Рекомендуется
Factory Automation I/O Expansion
Factory automation I/O expansion modules use the 10M25SAE144I7G to aggregate discrete sensors, opto-isolated inputs, and relay outputs onto a single fieldbus link. The 101 user I/O accommodate dozens of 24V-tolerant channels when paired with external level shifters, while the 12-bit ADC monitors supply rails and analog sensor outputs. Non-volatile instant-on behavior ensures deterministic startup when cabinets are power-cycled, which simplifies IEC 61131 PLC integration. The device pairs naturally with industrial Ethernet PHYs to form distributed I/O slices at sub-station granularity.
Рекомендуется
Video Bridging and Display Controller
Video bridging applications such as LVDS-to-RGB or MIPI-to-LVDS conversion leverage the 10M25SAE144I7G's LVDS support, 25K logic elements for protocol conversion, and 1,728 Kbits of embedded memory for line buffering. The exposed-pad 144-LQFP package mounts on cost-sensitive display controller boards where BGA packages would inflate assembly cost. Designers can prototype format converters, scalers, and timing generators in Quartus Prime Lite, then migrate the same firmware to higher-density MAX 10 or Cyclone devices without changing the PCB footprint.
Рекомендуется
Low-Cost ASIC/ASSP Replacement
The 10M25SAE144I7G is frequently used as a low-cost ASIC/ASSP replacement for low-to-mid volume products where a custom mask set is uneconomical. Its 25K logic elements, 45 multipliers, four ADCs, and non-volatile configuration let designers consolidate what would otherwise require a microcontroller, external ADC, configuration EEPROM, and discrete glue logic into a single 22x22 mm package. Quartus Prime Lite is free, eliminating per-seat toolchain licensing fees. Vertical migration to 10M40 or 10M50 within the same footprint lets the same PCB scale from prototype to feature-rich derivative.
Рекомендуется
Distributed Industrial Ethernet I/O Aggregation
At the edge of industrial Ethernet networks, the 10M25SAE144I7G aggregates sensor data from multiple field-side nodes and forwards it over EtherCAT, PROFINET, or Modbus TCP links. The 12-bit ADC integrates analog sensor sampling into the same device that runs the industrial protocol stack in soft logic. Non-volatile flash configuration eliminates boot delay concerns when the node is power-cycled by the upstream switch. With 101 user I/O and an industrial temperature grade, the device fits compact IP67 field-mount enclosures typical of modern smart-factory deployments.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для 10M25SAE144I7G — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | 10M16SAE144I7G | 10M40SAE144I7G | 10M50SAE144I7G | 10M25SAE144A7G | 10M25SCE144A7G | 10M08SAE144I7G |
|---|---|---|---|---|---|---|---|
| Package | 144-LQFP Exposed Pad (E144), 22x22 mm | 144-LQFP Exposed Pad (E144) - same | 144-LQFP Exposed Pad (E144) - same | 144-LQFP Exposed Pad (E144) - same | 144-LQFP Exposed Pad (E144) - same | 144-LQFP Exposed Pad (E144) - same | 144-LQFP Exposed Pad (E144) - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 25,000 | 16,000 (-36%) | 40,000 (+60%) | 50,000 (+100%) | 25,000 (same) | 25,000 (same) | 8,000 (-68%) |
| Embedded Memory (Kbits) | 1,728 | 1,152 (-33%) | 1,260 (-27%) | 1,638 (-5%) | 1,728 (same) | 1,728 (same) | 378 (-78%) |
| 18x18 Multipliers | 45 | 32 (-29%) | 70 (+56%) | 144 (+220%) | 45 (same) | 45 (same) | 16 (-64%) |
| Operating Temperature | -40C to +100C (industrial) | -40C to +100C | -40C to +100C | -40C to +100C | 0C to +85C (commercial) | 0C to +85C (commercial) | -40C to +100C |
| Speed Grade | I7G | I7G | I7G | I7G | A7G (commercial) | A7G (commercial) | I7G |
| Integrated ADC | 4 (12-bit, 1 MSPS) | 4 (12-bit, 1 MSPS) | 4 (12-bit, 1 MSPS) | 4 (12-bit, 1 MSPS) | 4 (12-bit, 1 MSPS) | 4 (12-bit, 1 MSPS) | 4 (12-bit, 1 MSPS) |
| Configuration Memory | Internal flash (non-volatile) | Internal flash | Internal flash | Internal flash | Internal flash | Internal flash | Internal flash |
Ключевые отличия
- Non-volatile flash configuration with integrated 12-bit ADC (против Lattice ECP5 LFE5U-25F)
- 144-LQFP exposed-pad package with vertical migration (против Lattice MachXO3-4300)
- Free Quartus Prime Lite toolchain (против Xilinx Spartan-6)
Заметки по проектированию
Solder the exposed pad (EPAD) of the 144-LQFP package to a continuous ground copper pour of at least 1 square inch to dissipate 1-2 W typical and avoid thermal shutdown. Without a continuous ground pour the junction-to-ambient thermal resistance rises sharply and the device may throttle. Estimated: at 1.5 W dissipation, a 25x25 mm 4-layer 1 oz copper pour keeps theta_JA below 25 C/W, supporting industrial-temperature operation without active cooling.
Decouple each VCCIO bank pin with a 0.1 uF ceramic capacitor placed within 5 mm of the pin, and add a bulk 10 uF tantalum or ceramic capacitor near the VCCINT/VCCIO cluster. The MAX 10 device is sensitive to rail noise during configuration; insufficient decoupling can cause configuration failure or CRC errors on flash memory. Estimated: budget 20 decoupling capacitors total for the 144-LQFP package power pins.
Route LVDS pairs with 100 ohm differential impedance and matched trace lengths within 150 mils to avoid skew on high-speed LVDS channels. Use 4-layer stackup with continuous reference planes; the 22x22 mm LQFP body has long lead spans, so signal-via antipad clearance must be respected to maintain impedance. Refer to the Intel MAX 10 handbook pin connection guidelines for bank-by-bank VREF and VCCIO routing.
Keep analog input pins to the dedicated ANA pins separate from digital I/O traces, and guard the analog section with a ground ring to isolate ADC sampling noise. The four integrated 12-bit ADCs sample at 1 MSPS and will couple switching noise from nearby digital lines if layout is careless. Estimated: maintain at least 5 mm between analog input traces and any switching signal traces.
Do not confuse the I7G speed grade with the C7G commercial-temperature speed grade - the I7G part is industrial-temperature qualified while A7G is commercial-only. Also note that the MAX 10 E144 package uses identical pinouts across density grades (10M02, 10M04, 10M08, 10M16, 10M25, 10M40, 10M50), enabling vertical migration within the same PCB footprint if Quartus Prime recompilation is acceptable.
Информация о соответствии
RoHS and REACH compliant per Intel MAX 10 product family documentation. AEC-Q100 not applicable - this is a non-automotive-grade industrial FPGA. Lead-free assembly process supported; halogen-free status not explicitly stated in provided data.
