5M160ZE64I4N - MAX V CPLD, 64-Pin EQFP | Intel
Артикул: 5M160ZE64I4N ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
5M160ZE64I4N Обзор
A CPLD, or complex programmable logic device, is a semiconductor in the programmable-logic hierarchy between fixed-function integrated circuits and larger FPGAs. Its configurable architecture implements Boolean logic, state machines, interface bridging, control sequencing, and glue logic. A MAX V CPLD is normally designed for applications requiring deterministic programmable behavior, low power consumption, and fast development through HDL-based design. The “Z,” “E64,” “I4,” and “N” markings may encode device, package, temperature, and shipping options, but their precise meanings must be confirmed from the manufacturer’s ordering-code documentation.
The principal verified feature is its position in the MAX V CPLD family. The available distributor information characterizes the family as low cost and low power while providing more density and I/Os per footprint than other CPLDs. That combination targets compact control and interface designs where board area, power budget, and logic integration matter. The part is supplied in a 64-pin EQFP package, making the land pattern, pin assignment, and package drawing essential pre-layout review items.
Architecturally, a CPLD implements programmed digital behavior through configurable logic resources and a programmable interconnect network. Engineers can use it to consolidate multiple small logic devices, generate precise timing and control sequences, or adapt board-level interfaces late in development. Because supplied sources do not expose the exact MAX V architecture details, designers should consult the manufacturer handbook before estimating speed, power, logic capacity, or I/O utilization.
Typical potential applications include industrial control logic, communications-interface adaptation, test equipment, embedded control, and compact systems requiring board-level glue logic. These are category-level use cases rather than guaranteed operating-condition claims. The device’s suitability for a specific design depends on the unverified electrical, timing, thermal, and I/O specifications in the manufacturer datasheet.
A key design consideration is footprint compatibility. Although several 5M160ZE64 ordering variants exist, only parts with an identical 64-pin package, matching pinout, acceptable temperature grade, compatible electrical specifications, and verified timing behavior should be considered drop-in candidates. This page does not treat reel-code or ordering-code variants as substitutes without that engineering evidence.
The information synthesized here combines the supplied distributor and manufacturer-source references, clearly separates verified attributes from missing specifications, and applies a strict evidence standard to pricing, lifecycle, and pin-to-pin alternative claims.
Аналоги без доработки для 5M160ZE64I4N — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с 5M160ZE64I4N (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, RoHS Status, Mounting Type, Configuration.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
Для этого товара нет аналогов без доработки.
Запросить аналоги5M160ZE64I4N Максимальные параметры и электрические характеристики
| Product Type | Complex Programmable Logic Device |
| Device Family | MAX V |
| Manufacturer | Altera Corporation |
| Корпус | 64-pin EQFP |
| Device Marking | 5M160ZE64I4N |
| Programmable Logic Technology | CPLD |
| Design Category | Low cost and low power |
| Integration Benefit | Greater density and I/Os per footprint |
| Тип монтажа | Surface Mount |
| Статус RoHS | RoHS Compliant |
| Lead-Free Status | Lead free |
| Programmability | In-system programmable device; methodology not verified |
Руководство по цоколевке 5M160ZE64I4N в корпусе 64-pin eqfp
Цоколевка для 5M160ZE64I4N (корпус 64-pin eqfp). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для 5M160ZE64I4N.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
5M160ZE64I4N подходит для 6 применениеs: Industrial Control Logic, Communications Interface Bridging, Embedded System Glue Logic, Test and Measurement Equipment, Legacy Board Replacement, Power-Conscious Logic Consolidation.
Industrial Control Logic
Intel 5M160ZE64I4N is a potential fit for industrial control logic because the MAX V family is positioned as a low-power CPLD platform with greater density and I/O availability per footprint. The device can consolidate glue logic, sequencing rules, and state-machine behavior around a processor or application-specific controller. Before implementation, confirm the exact logic capacity, user-I/O count, core voltage, propagation delay, and industrial temperature range from the manufacturer datasheet. Those critical values are absent from the verified snippets and must not be inferred. A 64-pin EQFP footprint can support compact control boards, but the final design also requires verification of Schmitt-trigger thresholds, output drive, clocking, and unused-pin handling.
Рекомендуется
Communications Interface Bridging
5M160ZE64I4N may serve as a bridge or glue-logic device between communications controllers, memories, sensors, and backplane interfaces. Its identification as a MAX V CPLD supports programmable state machines and signal-conditioning logic, while the family-level density-per-footprint claim may help compact interface boards. However, no verified I/O count, I/O standard, propagation delay, or supply-voltage range is supplied, so protocol timing and voltage compatibility cannot be guaranteed. Engineers should compare clock-to-output and setup timing, confirm supported electrical interfaces, and check whether level translation is required. A candidate with a different package or pinout would be a redesign rather than a drop-in replacement.
Рекомендуется
Embedded System Glue Logic
5M160ZE64I4N can be evaluated for embedded glue logic that requires programmable combinational and sequential behavior without the larger power and resource profile of an FPGA. The MAX V family’s low-power positioning is relevant to power-constrained embedded equipment, while a CPLD can implement decode logic, reset sequencing, interrupt handling, and peripheral adaptation. Exact current consumption and speed are not present in the verified data, so designers must retrieve the MAX V handbook and perform timing analysis. The 64-pin EQFP package also imposes board-space and escape-routing constraints. Validate I/O bank rules, configuration behavior, decoupling guidance, and unused-pin recommendations before selecting the part for a new embedded platform.
Рекомендуется
Test and Measurement Equipment
5M160ZE64I4N is a possible logic platform for test and measurement equipment where programmable control, repeatable sequencing, and interface adaptation are required. The device can potentially implement measurement timing, trigger routing, relay control, and communication handshaking, while its MAX V classification identifies it as a CPLD rather than a conventional fixed-function IC. The supplied evidence does not verify propagation delay, toggle rate, logic capacity, or I/O electrical standards, so high-speed measurement performance cannot be claimed. Engineers should check worst-case timing rather than relying on nominal logic behavior, and should account for clock distribution, output loading, signal integrity, and test-point access in the PCB design.
Рекомендуется
Legacy Board Replacement
5M160ZE64I4N is directly relevant when maintaining a legacy board that already specifies the same MAX V device. The complete MPN, including the 5M160ZE64I4N ordering suffix, is the strongest available identity signal, and procurement pages identify it as a low-cost, low-power CPLD. For replacement planning, obtain the original board’s exact part marking and compare it with incoming labels. Do not substitute another 5M160ZE64 suffix based only on similarity. The verified data lacks pin-level and electrical compatibility evidence, so every pin, voltage, timing limit, temperature grade, and package dimension must be checked. If the original configuration is available, preserve the programmed image and validate it in a controlled engineering build.
Рекомендуется
Power-Conscious Logic Consolidation
5M160ZE64I4N may help consolidate discrete logic functions into one programmable device, potentially reducing component count and board-level routing. The verified source positions MAX V as a low-cost, low-power CPLD family with improved density and I/O availability per footprint, which is useful when a design needs moderate programmable logic in a compact surface-mount package. Actual suitability depends on logic utilization, toggle rate, output loading, and thermal conditions, none of which are fully supplied. Estimate the resource budget from the manufacturer datasheet, simulate critical paths, and calculate current demand across operating modes. Confirm the required decoupling network and preserve signal-integrity margins when replacing multiple combinational devices.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для 5M160ZE64I4N — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Brand | Intel / Altera Corporation |
| Package | 64-pin EQFP |
| Device Family | MAX V |
| Product Type | CPLD |
| Power Positioning | Low power |
| Density Positioning | Greater density per footprint |
| RoHS Status | RoHS Compliant |
Ключевые отличия
- Family-level density and I/O positioning (против 5M160ZE64C5N)
- Low-power family positioning (против 5M160ZE64A5N)
- Specific ordering identity (против 5M160ZE64I5N)
Заметки по проектированию
Treat the family-level low-power description as a positioning statement, not a substitute for a numeric power budget. Retrieve core-voltage, standby-current, active-current, and inrush specifications from the manufacturer handbook. Estimated: actual dissipation depends on logic depth, toggle rate, clock frequency, I/O loading, and the number of powered I/O banks, so no numerical dissipation value is calculated here. Place local decoupling capacitors at the supply pins, keep each power loop compact, and provide a stable rail that remains within the datasheet tolerance during simultaneous output switching.
Use the official 64-pin EQFP package drawing before routing. The verified snippets confirm the package family but not dimensions, lead shape, pin numbering, or exposed-pad arrangement. Follow the manufacturer land-pattern recommendation, account for package orientation and pin-1 identification, and verify all 64 signal positions against the actual device datasheet. Preserve room for decoupling near power pins, provide a continuous reference plane, and avoid routing high-speed or noisy signals beneath programmable I/O areas unless the stack-up and design rules explicitly permit it.
Do not infer electrical or pin compatibility from the first six characters of an ordering code. The supplied data does not decode the 5M160ZE64I4N suffix or confirm that variants such as 5M160ZE64C5N, 5M160ZE64C4N, or 5M160ZE64A5N share the same temperature grade, speed grade, electrical limits, and pinout. A suffix change can also alter shipping, tray, or reel options without changing the underlying device. For any replacement, compare the complete manufacturer ordering table, datasheet limits, package drawing, qualification status, and programmed design requirements; otherwise classify the candidate as unverified rather than drop-in.
Clock, reset, and high-fanout output paths should be planned before PCB placement. Although exact timing values are missing, programmable-logic timing must be evaluated with the final route, load, and I/O-standard assumptions. Keep clock traces short, provide a low-impedance ground path, separate noisy interfaces where practical, and use controlled-impedance routing when rise time or clock frequency requires it. Confirm permitted pin configurations and unused-pin states in the device handbook. Validate timing with post-fit or post-route simulation, including setup, hold, clock-to-output, and recovery/removal checks where applicable.
Информация о соответствии
The supplied Alibaba result states Lead Free Status / RoHS Status as lead free / RoHS Compliant. REACH, AEC-Q100, halogen-free, and conflict-minerals data are not provided and are therefore unknown.
