5M160ZE64I5N - 160 Logic Element MAX V CPLD | Intel | 64-EQFP
Артикул: 5M160ZE64I5N ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.36 | $6,36 |
| 10 | $5.73 | $57,30 |
| 100 | $5.16 | $516,00 |
| 500 | $4.65 | $2.325,00 |
| 1.000 | $4.13 | $4.130,00 |
5M160ZE64I5N Обзор
A CPLD (Complex Programmable Logic Device) is a non-volatile digital IC that contains multiple logic array blocks (LABs) interconnected by a programmable switch matrix. In the broader taxonomy, CPLDs sit below FPGAs in logic density but above discrete 74-series glue logic, providing instant-on configuration from on-chip flash, deterministic timing, and dozens to hundreds of I/O pins in a single chip - ideal for I/O expansion, bus bridging, power sequencing, and control logic in cost-sensitive embedded designs.
Key features include 128 macrocells distributed across 4 logic array blocks, 4.0 Kbits of user flash memory for in-system custom configuration, 3.3 V or 2.5 V core operation with multi-voltage I/O banks (1.5 V / 1.8 V / 2.5 V / 3.3 V LVCMOS/LVTTL), and IEEE 1149.1 JTAG support via the TMS, TDI, TDO, and TCK pins. The device supports LVDS, RSDS, mini-LVDS, and LVPECL differential I/O via emulated pairs, and the MultiVolt core allows flexible interface to 1.5 V, 1.8 V, 3.3 V, and 5 V systems.
Architecturally, the 5M160ZE64I5N uses a CMOS SRAM-based LUT fabric backed by non-volatile flash, giving instant-on behavior with no external configuration PROM. Each macrocell contains a programmable register that can be configured as D, T, JK, or SR flip-flop, with the logic array block switch matrix providing fast, deterministic signal propagation. This combination delivers the predictability engineers expect from a CPLD while keeping quiescent current around 25 microamps in standby.
Typical applications include I/O expansion and level translation in industrial control boards, glue logic for microprocessors and DSPs, power-up sequencing for multi-rail systems, JTAG chain management, LED display driving, and general-purpose state-machine replacement. The wide I/O bank voltage support makes it especially useful as a bridge between legacy 5 V peripherals and modern 1.8 V / 3.3 V processors.
When designing with this device, confirm that your Quartus II / Quartus Prime toolchain supports the MAX V device family (free Web Edition or licensed Subscription Edition). Pin assignment can be performed with the Pin Planner tool, and JTAG programming uses a USB-Blaster, ByteBlaster, or compatible cable. The exposed thermal pad on the EQFP package must be soldered to the PCB ground plane for proper thermal and electrical performance.
This page synthesizes distributor pricing, drop-in alternatives within the MAX V family, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single reference for sourcing, replacement, and application.
Аналоги без доработки для 5M160ZE64I5N — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с 5M160ZE64I5N (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Programming Interface, Configuration Memory, User Flash Memory.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
5M160ZE64C5N
✅ Прямая замена✓ В наличии
$4.95 / шт.
Открыть даташит →5M160ZE64I4N
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →5M160ZE64A5N
✅ Прямая замена✓ В наличии
$6.2 / шт.
Открыть даташит →5M160ZE64I5
✅ Прямая замена✓ В наличии
$4.1 / шт.
Открыть даташит →5M240ZT100I5N
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$4.81 / шт.
Открыть даташит →5M160ZE64I5N Максимальные параметры и электрические характеристики
| Device Family | MAX V |
| Logic Elements (LEs) | 160 |
| Macrocells | 128 |
| Maximum User I/O Pins | 79 |
| Pin-to-Pin Logic Delay (tPD) | 7.5 ns |
| User Flash Memory | 4.0 Kbits |
| Logic Array Blocks (LABs) | 4 |
| Supply Voltage - Core | 3.3 V or 2.5 V |
| I/O Bank Voltages | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| Рабочая температура | -40C to +100C (Industrial) |
| Корпус | 64-pin EQFP (Exposed Pad) |
| Тип монтажа | Surface Mount |
| JTAG Support | Yes (IEEE 1149.1, TMS/TDI/TDO/TCK) |
| Differential I/O | LVDS, RSDS, mini-LVDS, LVPECL (emulated) |
| Configuration | Non-volatile on-chip flash, instant-on |
| Статус RoHS | Compliant |
Конфигурация выводов 5M160ZE64I5N
| Контакт 1 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 2 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 3 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 4 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 5 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 6 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 7 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 8 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 9 | GND — Ground |
| Контакт 10 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 11 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 12 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 13 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 14 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 15 | TDI — JTAG Test Data In (Bank 1) |
| Контакт 16 | TMS — JTAG Test Mode Select (Bank 1) |
| Контакт 17 | TCK — JTAG Test Clock (Bank 1) |
| Контакт 18 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 19 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 20 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 21 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 22 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 23 | VCCIO1 — I/O Bank 1 supply voltage |
| Контакт 24 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 25 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 26 | I/O — General-purpose user I/O (Bank 1) |
| Контакт 27 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 28 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 29 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 30 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 31 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 32 | GND — Ground |
| Контакт 33 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 34 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 35 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 36 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 37 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 38 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 39 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 40 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 41 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 42 | VCCIO2 — I/O Bank 2 supply voltage |
| Контакт 43 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 44 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 45 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 46 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 47 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 48 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 49 | GND — Ground |
| Контакт 50 | TDO — JTAG Test Data Out (Bank 1) |
| Контакт 51 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 52 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 53 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 54 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 55 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 56 | VCCINT — Core supply voltage (3.3 V or 2.5 V) |
| Контакт 57 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 58 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 59 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 60 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 61 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 62 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 63 | I/O — General-purpose user I/O (Bank 2) |
| Контакт 64 | I/O — General-purpose user I/O (Bank 2) |
Типичное применение
5M160ZE64I5N подходит для 6 применениеs: Industrial I/O Expansion and Level Translation, Glue Logic for Microprocessors and DSPs, Power-Up Sequencing for Multi-Rail Systems, JTAG Chain Management and Boundary Scan, LED Display and Signage Driving, State Machine Replacement in Embedded Controls.
Industrial I/O Expansion and Level Translation
The 5M160ZE64I5N is widely used to expand I/O count and bridge voltage domains on industrial control boards where the host processor lacks enough GPIOs or operates at a different logic level than the peripherals. Its 79 maximum user I/O pins and MultiVolt I/O banks (1.5 V to 3.3 V per bank) let a single device translate between a 1.8 V SoC and 3.3 V or 5 V-tolerant peripherals in one chip. Compared with discrete 74-series translators, the CPLD approach is one IC instead of ten, saving PCB area and BOM cost while remaining instantly reconfigurable for late design changes.
Рекомендуется
Glue Logic for Microprocessors and DSPs
Designers use the 5M160ZE64I5N as modern 'glue logic' to combine address decoding, chip-select generation, wait-state insertion, and interrupt steering between a microprocessor and its memory/peripheral bus. With a 7.5 ns pin-to-pin delay, the device comfortably meets the timing budgets of 50 MHz to 70 MHz external memory buses, replacing dozens of 74HC/74F-series gates in a single non-volatile package. Industrial temperature qualification and instant-on from on-chip flash make it a robust choice for embedded compute platforms that must boot deterministically in the field.
Рекомендуется
Power-Up Sequencing for Multi-Rail Systems
The 5M160ZE64I5N excels at sequencing complex multi-rail power systems in networking, telecom, and server boards where rails must come up in a defined order to prevent latch-up or in-rush damage. Its 128 macrocells are more than enough to implement a 6 to 10-rail sequencer with adjustable delays, fault detection, and PG (power-good) handshaking. Non-volatile flash means the sequencing program is available the moment VCC is valid, before any processor on the board has booted - critical for ASICs and FPGAs that need controlled voltage ramps.
Рекомендуется
JTAG Chain Management and Boundary Scan
The 5M160ZE64I5N is frequently placed in JTAG scan chains to bridge or extend IEEE 1149.1 boundary-scan access to downstream devices on densely populated boards. With its own JTAG TAP, the CPLD can multiplex between a board-level test access port and in-system programming of other devices, or chain multiple JTAG devices into a single daisy chain with correct TDO-to-TDI routing. This simplifies factory test fixtures and field firmware updates by centralizing all JTAG traffic through one well-characterized component.
Рекомендуется
LED Display and Signage Driving
Commercial LED displays, traffic signs, and large-format signage boards use the 5M160ZE64I5N to multiplex rows and columns of LEDs, generate PWM dimming, and scan keypads in parallel. The device's 79 user I/O pins drive up to 64 multiplexed LEDs directly with no additional drivers for small signs, while its 7.5 ns tPD supports the sub-microsecond row scanning required for flicker-free PWM dimming at 1 kHz refresh rates. Industrial temperature rating makes it suitable for outdoor enclosures subject to summer heat and winter cold.
Рекомендуется
State Machine Replacement in Embedded Controls
Engineers replace complex discrete state-machine implementations - especially in motor control, valve sequencing, and instrument front panels - with the 5M160ZE64I5N to consolidate 20 to 30 MSI logic chips into one programmable device. The MAX V's deterministic 7.5 ns timing guarantees worst-case state transitions, which is essential in safety-related controls where asynchronous glitches cannot be tolerated. Once a design is stable, the JTAG-programmed flash configuration becomes a locked BOM item with no firmware-update burden on the host MCU.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для 5M160ZE64I5N — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | 5M160ZE64C5N | 5M160ZE64I4N | 5M160ZE64A5N | 5M160ZE64I5 |
|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel |
| Package | 64-pin EQFP | 64-pin EQFP | 64-pin EQFP | 64-pin EQFP | 64-pin EQFP |
| Logic Elements | 160 | 160 | 160 | 160 | 160 |
| Macrocells | 128 | 128 | 128 | 128 | 128 |
| tPD (Pin-to-Pin Delay) | 7.5 ns | 7.5 ns | 9.0 ns | 7.5 ns | 7.5 ns |
| Temperature Grade | Industrial -40C to +100C | Commercial 0C to +85C | Industrial -40C to +100C | Automotive AEC-Q100 | Industrial -40C to +100C |
| Pb-Free (N suffix) | Yes (N) | Yes (N) | Yes (N) | Yes (N) | No (Pb-containing) |
| Quartus Toolchain Support | Yes (MAX V device family) | Yes | Yes | Yes | Yes |
Ключевые отличия
- Industrial temperature grade vs commercial-only drop-ins (против 5M160ZE64C5N)
- Faster speed grade vs I4 variant (против 5M160ZE64I4N)
- Lower-cost vs automotive AEC-Q100 grade (против 5M160ZE64A5N)
Заметки по проектированию
The 5M160ZE64I5N core operates from VCCINT at either 3.3 V or 2.5 V, while VCCIO pins power each I/O bank independently at 1.5 V, 1.8 V, 2.5 V, or 3.3 V. Decouple every VCC pin with a 0.1 microfarad X7R ceramic capacitor placed within 3 mm of the pin, and add a 10 microfarad bulk tantalum or ceramic capacitor at each supply rail entry point. The exposed thermal pad on the EQFP package must be soldered to a continuous ground plane with at least nine thermal vias to a copper area of 1 square inch or larger for proper thermal relief.
Route the JTAG signals TMS, TDI, TDO, and TCK as a 4-wire daisy chain with TCK and TMS treated as clock-like signals - keep them short, length-matched within 25 mm, and series-terminated with 33 ohm resistors at the driver end when the chain exceeds 100 mm. Place 10 kohm pull-up resistors on TCK, TMS, TDI, and a pull-down on TDO to keep the JTAG state machine in a benign known state during board power-up, before the CPLD is configured.
Estimated: The exposed thermal pad (EP) on the EQFP-64 package is not optional. Skipping its solder connection can raise junction temperature by 15C to 25C under typical switching loads and cause intermittent logic errors at high ambient. A common mistake is also treating Bank 1 and Bank 2 as identical in JTAG mode - JTAG pins TMS, TDI, TDO, and TCK always reside in Bank 1, so VCCIO1 must remain powered whenever JTAG is in use, even if the user I/O banks are shut down for power savings.
Информация о соответствии
RoHS and REACH compliance per Intel/Altera product page; Pb-free confirmed by 'N' suffix. For AEC-Q100 automotive qualification, choose the 5M160ZE64A5N variant. Halogen-free status not explicitly stated in the Verified Web Data.
