AD4000BRUZ-RL7 - 16-Bit 2MSPS SAR ADC | Analog Devices
Артикул: AD4000BRUZ-RL7 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $40.24 | $40,24 |
| 10 | $36.5 | $365,00 |
| 100 | $32.8 | $3.280,00 |
| 500 | $29.1 | $14.550,00 |
| 1.000 | $25.4 | $25.400,00 |
AD4000BRUZ-RL7 Обзор
An ADC (Analog-to-Digital Converter) is a device that converts an analog voltage or current into a digital number proportional to the magnitude of the signal. SAR (Successive Approximation Register) ADCs use a binary search algorithm to determine the digital output, offering a good balance of speed, resolution, and power consumption. They are widely used in data acquisition systems, industrial process control, medical instrumentation, and communication systems where precision and speed are required.
Key features of the AD4000BRUZ-RL7 include 16-bit resolution, 2 MSPS sampling rate, pseudo differential input, and Easy Drive technology that reduces input drive requirements. The device operates from a single 1.8V analog supply and a separate digital supply, with a typical power dissipation of only 3.5 mW at 2 MSPS. It also features a high-Z mode for reduced input current and an extended acquisition phase, simplifying the front-end design.
The AD4000BRUZ-RL7 uses a precision SAR architecture with an internal reference buffer and supports both SPI and daisy-chain interfaces. The Easy Drive feature allows direct connection to high-impedance sensors without an external driver amplifier, reducing component count and power consumption. The device also includes a temperature sensor and a 4-wire SPI interface for easy integration with microcontrollers and DSPs.
Typical applications include data acquisition systems, industrial automation, medical imaging, and portable instrumentation. The high speed and low power make it suitable for battery-powered devices, while the precision and Easy Drive features enable accurate measurements in noisy environments.
When designing with the AD4000BRUZ-RL7, ensure proper decoupling of the analog and digital supplies and use a low-impedance reference source. The device requires a conversion clock and a serial clock for data output; careful layout of the analog input and reference traces is essential to maintain accuracy.
Аналоги без доработки для AD4000BRUZ-RL7 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с AD4000BRUZ-RL7 (тот же форм-фактор и посадочное место) — отличается по Interface, Sampling Rate, Input Type, Package, Resolution.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
AD4000BRUZ
✅ Прямая замена✓ В наличии
$8.1 / шт.
Открыть даташит →AD4004BRUZ
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$6.25 / шт.
Открыть даташит →AD4008BRUZ
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.73 / шт.
Открыть даташит →AD4000BRUZ-RL7 Максимальные параметры и электрические характеристики
| Разрешение | 16 bits |
| Частота дискретизации | 2 MSPS |
| Input Type | Pseudo differential |
| Number of Inputs | 1 |
| Интерфейс | SPI, daisy-chain |
| Supply Voltage (Analog) | 1.8 V |
| Supply Voltage (Digital) | 1.8 V to 5 V |
| Power Dissipation | 3.5 mW at 2 MSPS |
| Корпус | 16-lead TSSOP |
| Диапазон рабочих температур | -40°C to +125°C |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
| Easy Drive | Yes |
Конфигурация выводов AD4000BRUZ-RL7
| Контакт 1 | VIN — Analog input |
| Контакт 2 | REF — Reference input |
| Контакт 3 | GND — Ground |
| Контакт 4 | VDD — Analog supply |
| Контакт 5 | VIO — Digital supply |
| Контакт 6 | SCLK — Serial clock |
| Контакт 7 | SDI — Serial data in |
| Контакт 8 | SDO — Serial data out |
| Контакт 9 | CNV — Convert input |
| Контакт 10 | GND — Ground |
| Контакт 11 | VDD — Analog supply |
| Контакт 12 | REF — Reference input |
| Контакт 13 | VIN — Analog input |
| Контакт 14 | GND — Ground |
| Контакт 15 | VIO — Digital supply |
| Контакт 16 | GND — Ground |
Типичное применение
AD4000BRUZ-RL7 подходит для 6 применениеs: Data Acquisition Systems, Industrial Automation, Medical Instrumentation, Portable Instrumentation, Communication Systems, Test and Measurement.
Data Acquisition Systems
The AD4000BRUZ-RL7 is ideal for high-speed data acquisition systems requiring 16-bit precision at 2 MSPS. Its Easy Drive technology simplifies front-end design by allowing direct connection to sensors without an external driver amplifier, reducing component count and power consumption. The pseudo differential input rejects common-mode noise, making it suitable for industrial environments. With a low power dissipation of 3.5 mW, it is also suitable for multi-channel systems where power is a concern. The SPI interface enables easy integration with microcontrollers and DSPs, and the daisy-chain feature allows multiple ADCs to share a single serial bus, simplifying system design.
Рекомендуется
Industrial Automation
In industrial automation, the AD4000BRUZ-RL7 provides accurate, high-speed conversion for process control, motor control, and condition monitoring. Its 16-bit resolution and 2 MSPS sampling rate enable precise measurement of fast-changing signals. The device operates over a wide temperature range (-40°C to +125°C), ensuring reliability in harsh environments. The Easy Drive feature reduces the need for external buffering, lowering system cost and complexity. The pseudo differential input helps reject ground noise, which is common in industrial settings. The SPI interface allows direct connection to industrial microcontrollers, and the daisy-chain capability simplifies wiring in multi-channel systems.
Рекомендуется
Medical Instrumentation
The AD4000BRUZ-RL7 is well-suited for medical instrumentation such as patient monitoring, diagnostic imaging, and laboratory equipment. Its high accuracy and low power consumption are critical for battery-operated devices. The 16-bit resolution provides fine detail for physiological signals, while the 2 MSPS sampling rate captures fast transients. The Easy Drive technology allows direct connection to high-impedance sensors like ECG electrodes, simplifying the analog front-end. The small TSSOP package saves board space, and the wide temperature range ensures reliable operation in clinical environments. The SPI interface enables seamless integration with medical-grade microcontrollers.
Рекомендуется
Portable Instrumentation
For portable instruments like handheld multimeters, data loggers, and field analyzers, the AD4000BRUZ-RL7 offers a balance of performance and power efficiency. Its 3.5 mW power dissipation at 2 MSPS extends battery life, and the 1.8V analog supply is compatible with low-voltage batteries. The Easy Drive feature reduces the need for external components, saving space and cost. The pseudo differential input allows accurate measurement of small signals in the presence of common-mode noise. The SPI interface is simple to interface with low-power microcontrollers, and the daisy-chain feature enables multi-channel expansion without additional I/O pins.
Рекомендуется
Communication Systems
In communication systems, the AD4000BRUZ-RL7 is used for baseband signal processing, software-defined radio, and spectrum analysis. Its 2 MSPS sampling rate and 16-bit resolution provide sufficient dynamic range for many communication signals. The low power dissipation is beneficial in portable and remote communication devices. The Easy Drive technology simplifies the interface to RF front-ends, and the pseudo differential input helps reject interference. The SPI interface allows direct connection to FPGAs and DSPs, and the daisy-chain feature enables multiple ADCs to be used in phased-array systems. The wide temperature range ensures reliable operation in outdoor equipment.
Рекомендуется
Test and Measurement
The AD4000BRUZ-RL7 is a key component in test and measurement equipment such as oscilloscopes, spectrum analyzers, and data acquisition cards. Its high speed and precision enable accurate capture of waveforms and transient events. The 16-bit resolution provides fine amplitude resolution, and the 2 MSPS sampling rate is sufficient for many audio and low-frequency applications. The Easy Drive feature reduces the burden on front-end amplifiers, and the pseudo differential input allows accurate measurement of floating signals. The SPI interface is compatible with common test equipment controllers, and the daisy-chain feature allows multiple channels to be synchronized. The device's low power dissipation is an advantage in portable test instruments.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AD4000BRUZ-RL7 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AD4000BRUZ | AD4004BRUZ | AD4008BRUZ | AD4000BRMZ-RL7 |
|---|---|---|---|---|---|
| Package | 16-lead TSSOP | 16-lead TSSOP | 16-lead TSSOP | 16-lead TSSOP | 10-lead MSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 16 bits | 16 bits | 18 bits | 20 bits | 16 bits |
| Sampling Rate | 2 MSPS | 2 MSPS | 2 MSPS | 2 MSPS | 2 MSPS |
| Input Type | Pseudo differential | Pseudo differential | Pseudo differential | Pseudo differential | Pseudo differential |
| Power Dissipation | 3.5 mW | 3.5 mW | 3.5 mW | 3.5 mW | 3.5 mW |
| Interface | SPI, daisy-chain | SPI, daisy-chain | SPI, daisy-chain | SPI, daisy-chain | SPI, daisy-chain |
| Operating Temperature | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
Ключевые отличия
- Easy Drive technology reduces input drive requirements (против AD7980BRMZ)
- Higher sampling rate of 2 MSPS (против AD7980BRMZ)
- Pseudo differential input for better noise rejection (против AD7980BRMZ)
Заметки по проектированию
The AD4000BRUZ-RL7 requires a clean 1.8V analog supply (VDD) and a separate digital supply (VIO) that can range from 1.8V to 5V. Use low-dropout regulators (LDOs) to generate these supplies and place 0.1uF and 10uF decoupling capacitors close to the VDD and VIO pins. The reference input (REF) should be driven by a low-impedance source, such as a precision reference buffer, to ensure accurate conversions.
For optimal performance, separate analog and digital ground planes and connect them at a single point near the ADC. Route the analog input (VIN) and reference (REF) traces away from digital signals to minimize noise coupling. Use a solid ground plane under the ADC and avoid routing high-speed digital traces beneath the analog input. Place the ADC close to the signal source to reduce trace inductance.
A common mistake is driving the analog input with a high-impedance source without considering the ADC's input capacitance. The Easy Drive feature reduces this issue, but it is still important to ensure the source can settle within the acquisition time. Also, avoid exceeding the absolute maximum ratings on the input pins. Use a series resistor (e.g., 10-50 ohms) to limit input current if overvoltage is possible. Ensure the reference voltage is stable and within the specified range.
Информация о соответствии
RoHS compliance is indicated by the 'Z' suffix in the part number. Other compliance details are not specified in the provided data.
