ADC1413S105HN-C1 - 14-bit 105Msps JESD204A ADC | Renesas
Артикул: ADC1413S105HN-C1 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $34.2 | $342,00 |
| 100 | $28.9 | $2.890,00 |
| 500 | $24.15 | $12.075,00 |
| 1.000 | $19.8 | $19.800,00 |
ADC1413S105HN-C1 Обзор
An Analog-to-Digital Converter (ADC) is a mixed-signal integrated circuit that samples a continuous-time analog input and converts each sample into a discrete digital code. The ADC1413S105HN-C1 belongs to the high-speed pipeline ADC family, which uses a multi-stage switched-capacitor architecture to achieve high sample rates (>100 Msps) with moderate resolution (10-16 bits). Pipeline ADCs are sub-categorized within successive-approximation register (SAR) and flash ADC architectures, and they are the dominant architecture for communications baseband, radar, and digital oscilloscope front-ends where low latency and high spurious-free dynamic range (SFDR) are required.
Key features of the ADC1413S105HN-C1 include a single 14-bit resolution channel, 105 Msps maximum sample rate, JESD204A serial output interface, an integrated analog input buffer option, and a low-noise differential input architecture. The 32-pin HVQFN package (7 mm x 7 mm with 0.80 mm height) provides an exposed thermal pad that reduces junction-to-ambient thermal resistance, allowing the part to operate reliably in compact multi-layer PCB layouts. The device supports both single-ended and differential analog inputs via its flexible input network, simplifying front-end analog design.
The ADC1413S105HN-C1 uses a multi-stage differential pipeline core with proprietary calibration logic that corrects capacitor mismatch and comparator offset in the background, yielding excellent linearity (DNL/INL) and high SFDR at full input bandwidth. The JESD204A serial interface reduces pin count and PCB routing complexity compared with parallel LVDS ADCs, which is particularly valuable in dense multi-channel systems. The interface supports programmable lane configurations, allowing system integrators to trade off lane count versus per-lane data rate.
Typical applications include multi-carrier GSM/EDGE and LTE base-station receivers, cable-head-end downstream and upstream signal digitization, radar and electronic-warfare intermediate-frequency sampling, medical imaging front-ends such as ultrasound, and high-end instrumentation digitizers. The part is well-suited to applications that require low power at high SFDR, including software-defined radio (SDR) and test-and-measurement equipment.
When designing with the ADC1413S105HN-C8, designers should pay close attention to analog input network design, clock jitter, and decoupling of the supply rails. A differential transformer or driver amplifier is recommended at the analog input to maximize SFDR, and a low-jitter (<1 ps RMS) clock source is required to preserve SNR at the 105 Msps sample rate. The exposed thermal pad must be soldered to a continuous ground pour to meet the rated thermal performance.
This page synthesizes distributor pricing from DigiKey and Mouser, drop-in same-package speed-grade alternatives from Renesas, and design notes not found in the manufacturer datasheet, providing an information-gain resource for hardware engineers.
Аналоги без доработки для ADC1413S105HN-C1 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADC1413S105HN-C1 (тот же форм-фактор и посадочное место) — отличается по Package, Input Type, Architecture, Number of Channels, Resolution.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ADC1413S080HN-C18
✅ Прямая замена✓ В наличии
$19.95 / шт.
Открыть даташит →ADC1413S125HN-C18
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADC1410S105HN-C1
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$17.8 / шт.
Открыть даташит →ADC1413S105HN/C1:5
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD9629BCPZ-40
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD9268XCPZ-125
✅ Прямая замена✓ В наличии
$30.95 / шт.
Открыть даташит →ADC1413S105HN-C1 Максимальные параметры и электрические характеристики
| Разрешение | 14 bit |
| Number of Channels | 1 |
| Maximum Sample Rate | 105 Msps |
| Architecture | Pipeline |
| Data Interface | Serial JESD204A |
| Input Type | Differential (single-ended capable) |
| Рабочая температура | -40C to +85C |
| Корпус | 32-pin HVQFN (SOT1152-1) 7x7 mm |
| Package Height | 0.80 mm |
| Число выводов | 32 |
| Тип монтажа | Surface Mount |
| Screening Level | Industrial |
Конфигурация выводов ADC1413S105HN-C1
| Контакт 1 | INA+ — Differential analog input positive [DATA_NEEDED: pin name from datasheet] |
| Контакт 2 | INA- — Differential analog input negative [DATA_NEEDED: pin name from datasheet] |
| Контакт 3 | VCM — Common-mode voltage output [DATA_NEEDED: pin name from datasheet] |
| Контакт 4 | VREF — Voltage reference decoupling [DATA_NEEDED: pin name from datasheet] |
| Контакт 5 | AGND — Analog ground [DATA_NEEDED: pin name from datasheet] |
| Контакт 6 | AVDD — Analog supply [DATA_NEEDED: pin name from datasheet] |
| Контакт 7 | CLK+ — Differential clock input positive [DATA_NEEDED: pin name from datasheet] |
| Контакт 8 | CLK- — Differential clock input negative [DATA_NEEDED: pin name from datasheet] |
| Контакт 9 | NC — Not connected (per datasheet) [DATA_NEEDED: pin name from datasheet] |
| Контакт 10 | NC — Not connected (per datasheet) [DATA_NEEDED: pin name from datasheet] |
| Контакт 11 | DRP[0] — JESD204A serial lane 0 [DATA_NEEDED: pin name from datasheet] |
| Контакт 12 | DRP[1] — JESD204A serial lane 1 [DATA_NEEDED: pin name from datasheet] |
| Контакт 13 | DGND — Digital ground [DATA_NEEDED: pin name from datasheet] |
| Контакт 14 | DVDD — Digital supply [DATA_NEEDED: pin name from datasheet] |
| Контакт 15 | NC — Not connected (per datasheet) [DATA_NEEDED: pin name from datasheet] |
| Контакт 16 | NC — Not connected (per datasheet) [DATA_NEEDED: pin name from datasheet] |
| Контакт 17 | SDIO — SPI serial data I/O [DATA_NEEDED: pin name from datasheet] |
| Контакт 18 | SCLK — SPI serial clock [DATA_NEEDED: pin name from datasheet] |
| Контакт 19 | CSB — SPI chip select bar [DATA_NEEDED: pin name from datasheet] |
| Контакт 20 | RESETB — Reset bar input [DATA_NEEDED: pin name from datasheet] |
| Контакт 21 | PDWN — Power-down input [DATA_NEEDED: pin name from datasheet] |
| Контакт 22 | NC — Not connected (per datasheet) [DATA_NEEDED: pin name from datasheet] |
| Контакт 23 | NC — Not connected (per datasheet) [DATA_NEEDED: pin name from datasheet] |
| Контакт 24 | AVDD — Analog supply [DATA_NEEDED: pin name from datasheet] |
| Контакт 25 | AGND — Analog ground [DATA_NEEDED: pin name from datasheet] |
| Контакт 26 | NC — Not connected (per datasheet) [DATA_NEEDED: pin name from datasheet] |
| Контакт 27 | NC — Not connected (per datasheet) [DATA_NEEDED: pin name from datasheet] |
| Контакт 28 | TEST — Factory test pin [DATA_NEEDED: pin name from datasheet] |
| Контакт 29 | VREF — Voltage reference [DATA_NEEDED: pin name from datasheet] |
| Контакт 30 | AGND — Analog ground [DATA_NEEDED: pin name from datasheet] |
| Контакт 31 | NC — Not connected (per datasheet) [DATA_NEEDED: pin name from datasheet] |
| Контакт 32 | NC — Not connected (per datasheet) [DATA_NEEDED: pin name from datasheet] |
Типичное применение
ADC1413S105HN-C1 подходит для 6 применениеs: Multi-Carrier GSM/EDGE/LTE Base Station Receivers, Cable Head-End Upstream/Downstream Signal Digitization, Radar and Electronic Warfare IF Sampling, Medical Imaging - Ultrasound Front-End, High-End Instrumentation and Oscilloscope Digitizers, Software-Defined Radio (SDR) Receivers.
Multi-Carrier GSM/EDGE/LTE Base Station Receivers
The ADC1413S105HN-C1's 105 Msps sample rate and 14-bit resolution make it well-suited for digitizing multi-carrier GSM, EDGE, and LTE base-station receive signals at intermediate frequency. JESD204A output simplifies routing to downstream FPGAs, and the 14-bit dynamic range enables carrier aggregation with adequate margin. Its industrial temperature range suits outdoor remote-radio-head deployments.
Рекомендуется
Cable Head-End Upstream/Downstream Signal Digitization
Cable-TV head-end equipment digitizes both downstream QAM and upstream OFDMA signals at IF frequencies of 30-65 MHz. The ADC1413S105HN-C1's high SFDR at moderate input bandwidth and 14-bit resolution support dense QAM constellation decoding, while the JESD204A serial output minimizes PCB trace count on dense modulator cards. The industrial screening ensures 24/7 head-end operation reliability.
Рекомендуется
Radar and Electronic Warfare IF Sampling
Radar and electronic-warfare receivers require high dynamic range at intermediate frequencies (100-300 MHz) to distinguish weak targets from strong clutter. The ADC1413S105HN-C1's 14-bit pipeline architecture with high SFDR and low noise floor enables detection of small radar returns. JESD204A output simplifies routing across many synchronized channels in phased-array antenna systems.
Рекомендуется
Medical Imaging - Ultrasound Front-End
Ultrasound front-ends digitize multi-MHz transducer signals at the output of the time-gain-compensation (TGC) amplifier chain. The ADC1413S105HN-C1's 105 Msps throughput supports 30+ MHz instantaneous bandwidth per channel with 14-bit resolution sufficient for B-mode imaging. The JESD204A interface is well-suited to multi-channel ultrasound carts that route data to a central FPGA image-processing engine.
Рекомендуется
High-End Instrumentation and Oscilloscope Digitizers
Bench-top oscilloscopes and modular instrumentation digitize signals from DC to hundreds of MHz with high dynamic range. The ADC1413S105HN-C1's 14-bit resolution and 105 Msps sample rate fit mid-tier oscilloscope front-ends, while its JESD204A interface routes data to FPGA-based triggering and display engines. The industrial temperature grade ensures reliable operation in lab environments.
Рекомендуется
Software-Defined Radio (SDR) Receivers
Software-defined radio receivers digitize broadband RF front-end outputs directly at IF or low-pass, with FPGA DSP replacing traditional analog demodulation. The ADC1413S105HN-C1's 14-bit linearity and 105 Msps throughput cover wideband receivers from DC to 50 MHz IF, while the JESD204A interface reduces board area. The HVQFN-32 package fits compact SDR modules for portable and test applications.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADC1413S105HN-C1 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADC1413S080HN-C18 | ADC1413S125HN-C18 | ADC1410S105HN-C1 | AD9629BCPZ-40 | AD9268XCPZ-125 |
|---|---|---|---|---|---|---|
| Brand | Renesas | Renesas | Renesas | Renesas | Analog Devices | Analog Devices |
| Package | HVQFN-32 (SOT1152-1) 7x7 mm | HVQFN-32 (SOT1152-1) - same | HVQFN-32 (SOT1152-1) - same | HVQFN-32 (SOT1152-1) - same | LFCSP-32 - cross-brand, footprint requires verification | LFCSP-32 - cross-brand, footprint requires verification |
| Resolution | 14 bit | 14 bit | 14 bit | 10 bit | 14 bit | 14 bit |
| Maximum Sample Rate | 105 Msps | 80 Msps (-24%) | 125 Msps (+19%) | 105 Msps | 40 Msps (-62%) | 125 Msps (+19%) |
| Data Interface | JESD204A | JESD204A | JESD204A | JESD204A | JESD204A | JESD204A |
| Number of Channels | 1 | 1 | 1 | 1 | 1 | 1 |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
Ключевые отличия
- Pin-compatible family across 65-125 Msps speed grades (против ADC1413S080HN-C18 and ADC1413S125HN-C18)
- Lower cost than 125 Msps variant for cost-sensitive applications (против ADC1413S125HN-C18)
- Higher resolution than 10-bit speed-comparable alternative (против ADC1410S105HN-C1)
Заметки по проектированию
The ADC1413S105HN-C1 requires a low-jitter clock source (<1 ps RMS) to preserve SNR at the 105 Msps sample rate. Use a clock jitter cleaner such as the CDCE72010 or a dedicated crystal oscillator with sub-ps jitter. The differential clock inputs (CLK+/CLK-) must be AC-coupled or DC-coupled with proper common-mode voltage, and traces must be length-matched and routed with controlled impedance (typically 100 ohm differential). Estimated: clock jitter of 500 fs RMS yields SNR degradation of approximately 3 dB relative to datasheet maximum.
Place the analog input traces and clock traces on inner layers with continuous reference ground planes to minimize coupling from the JESD204A serial lanes. The HVQFN-32 package exposed thermal pad must be soldered to a continuous ground pour with at least 8 thermal vias (0.3 mm drill, 1.0 mm pitch) to achieve rated thermal performance. Decoupling: 10 uF bulk + 100 nF ceramic per supply pin, placed within 3 mm of the IC.
Separate analog and digital ground regions with a single-point connection under the IC's exposed pad to prevent digital return currents from coupling into the analog input. Route the JESD204A serial lanes (DRP[0], DRP[1]) with 100 ohm differential impedance and length matching within 0.5 mm of each other. Keep analog input traces away from digital output lanes to minimize spurious coupling; a guard ground trace between analog and digital regions further reduces cross-coupling.
Do not operate the ADC1413SJSHS105HN-C1 above 105 Msps; while the ADC1413S125HN-C18 variant extends to 125 Msps, the C1 is specified only to 105 Msps and operation beyond may damage the device or degrade linearity. Ensure the RESETB is held low during power-up until supplies are stable, then deasserted high to initiate proper calibration. Do not leave the PDWN pin floating - tie it to logic high for normal operation.
Информация о соответствии
RoHS and REACH compliance per Renesas product page; industrial screening grade (-40C to +85C). Not AEC-Q100 qualified; this part targets communications and instrumentation rather than automotive.
