Analog Devices

ADM3490ARZ - 10Mbps RS-485/422 Transceiver | Analog Devices

Артикул: ADM3490ARZ ✓ Активен
3.3 V Vdss EIA RS-422 and RS-485 compliant Rds(on) 8-SOIC, 3.90 mm width Package
MOQ: 1 |

ADM3490ARZ Обзор

The Analog Devices ADM3490ARZ is a 3.3 V differential line transceiver supporting RS-485 and RS-422 operation at data rates up to 10 Mbps, with one driver and one receiver in an 8-pin SOIC package. Its reduced-slew-rate design lowers electromagnetic interference while maintaining the throughput required for industrial communication links. The device also supports 5 V logic interoperability and operates across the full common-mode range specified for EIA RS-422 and RS-485 networks.

A differential line transceiver is an interface IC that converts logic-level signals into balanced differential signals for reliable transmission over noisy interconnects. The ADM3490ARZ belongs to the RS-485/RS-422 transceiver hierarchy, combining a line driver, a differential receiver, and an interface supply in one device. Balanced signaling improves noise immunity by rejecting common-mode voltage, while the receiver reconstructs the intended logic state from the difference between two signal conductors.

The principal features include operation from a single 3.3 V supply, a maximum data rate of 10 Mbps, reduced slew rates for low EMI, half- and full-duplex family options, and interoperability with 5 V logic. Its receiver input impedance is 12 kΩ, allowing up to 32 transceivers on a bus. A shutdown function supports low-power operation, while thermal-shutdown protection helps prevent excessive internal heating from sustained fault conditions.

The ADM3490ARZ is designed around a differential driver and differential receiver suitable for point-to-point, multipoint, and multidrop RS-485 networks. The reduced edge rate spreads high-frequency energy more broadly and reduces ringing and radiated emissions compared with an unrestricted 10 Mbps edge rate. Logic-compatible receiver output and driver input interfaces simplify connection to 3.3 V controllers while permitting interoperability with systems containing 5 V logic.

Typical applications include industrial automation, factory equipment, building controls, instrumentation links, and embedded RS-485 networks. It is particularly useful when a design needs more speed than the 250 kbps ADM3483 and ADM3488 class while retaining reduced-slew-rate behavior for electromagnetic compatibility. The SOIC-8 footprint also supports conventional surface-mount assembly and copper-based thermal dissipation.

For robust bus implementation, place the transceiver close to the connector and route the differential pair as a tightly coupled trace over a continuous reference plane.Termination, biasing, and protection components should be placed where they can be changed or inspected without disturbing the signal pair. The manufacturer datasheet should be used to confirm the exact pin assignments, input thresholds, timing limits, and bus loading conditions for the selected system.

This page combines the manufacturer's device characteristics with practical interface guidance, a parameter-focused comparison against same-footprint alternatives, and design notes for PCB routing, termination, and fault protection. These engineering details help distinguish a genuinely drop-in replacement from a transceiver that is only functionally similar but incompatible with the existing ADM3490ARZ footprint.

Аналоги без доработки для ADM3490ARZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ADM3490ARZ (тот же форм-фактор и посадочное место) — отличается по Package, Product Type, Maximum Data Rate, Logic Compatibility, Receiver Input Impedance.

Analog Devices
Package: 14-lead SOIC
Product Type: Full-duplex differential line transceiver
Logic Compatibility: 5 V logic interoperable
Сравнить с ADM3490ARZ →
Analog Devices
Package: 8-pin SOIC
Product Type: RS-485/RS-422 transceiver
Maximum Data Rate: 12 Mbps
Сравнить с ADM3490ARZ →

ADM3485ARZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 8-SOIC
Uses the same 10 Mbps class and 3.3 V supply; operating-mode and shutdown control details must be checked against ADM3490ARZ.

📋 Справочный аналог (нет в каталоге)

ADM3486ARZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 8-SOIC
Retains the 3.3 V RS-485/RS-422 interface and 8-SOIC footprint; duplex configuration and bus-pin assignments differ from ADM3490ARZ and require verification.

📋 Справочный аналог (нет в каталоге)

ADM3488ARZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 8-SOIC
Supports 250 kbps versus 10 Mbps for ADM3490ARZ, a 97.5% reduction in maximum data rate, while retaining a 3.3 V reduced-slew-rate 8-SOIC transceiver.

📋 Справочный аналог (нет в каталоге)

ADM3491ARZ

✅ Прямая замена ⚠️ Характеристики не проверены
Analog Devices
📦 8-SOIC
Full-duplex differential line transceiver · EIA RS-422 and EIA RS-485 · 3.3 V · 10 Mbps · 19 kΩ · 50 transceivers · 840 µA · 2 nA

Уточнить цену

Открыть даташит →

ADM3490EARZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 8-SOIC
Shares the 3.3 V, 10 Mbps ADM3490 function and 8-SOIC footprint, with enhanced 15 kV ESD protection in the E-series device.

📋 Справочный аналог (нет в каталоге)

MAX3490ECSA+

✅ Прямая замена
Analog Devices
📦 8-SOIC
RS-485/RS-422 transceiver · 3.3 V · 12 Mbps · 10 Mbps · ±15 kV · 1 driver · 1 receiver · RS-485 and RS-422

Уточнить цену

Открыть даташит →

ADM3490ARZ Характеристики

Product Type Differential RS-485/RS-422 line transceiver
Напряжение питания 3.3 V
Maximum Data Rate 10 Mbps
Number of Drivers 1
Number of Receivers 1
Logic Compatibility Interoperable with 5 V logic
Standards Compatibility EIA RS-422 and RS-485 compliant
Receiver Input Impedance 12 kΩ
Maximum Bus Loading 32 transceivers
Slew Rate Reduced
Duplex Support Half-duplex and full-duplex family options
Shutdown Support Yes
Thermal Protection Thermal shutdown
Корпус 8-SOIC, 3.90 mm width
Тип монтажа Surface mount
Диапазон рабочих температур -40°C to +85°C

Конфигурация выводов ADM3490ARZ

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Контакт 1 RO — Receiver output
Контакт 2 /RE — Active-low receiver enable
Контакт 3 DE — Driver enable
Контакт 4 DI — Driver input
Контакт 5 GND — Ground
Контакт 6 A — Non-inverting differential bus terminal
Контакт 7 B — Inverting differential bus terminal
Контакт 8 VCC — 3.3 V supply

Типичное применение

ADM3490ARZ подходит для 6 применениеs: Industrial Automation Bus, Factory Sensor Network, Building Control Network, Instrumentation Data Link, Embedded Controller Communication, Robust Field-Bus Gateway.

🏭

Industrial Automation Bus

The ADM3490ARZ fits industrial automation links that require deterministic differential signaling at speeds up to 10 Mbps. Place it at the bus node between the controller and an RS-485 connector, with separate differential nets for the driver and receiver as required by the selected topology. Its reduced-slew-rate operation limits high-frequency edge energy and radiated emissions, which is valuable around motors, contactors, and switching supplies. The 12 kΩ receiver input impedance also permits up to 32 transceivers on a bus, although cable length, node spacing, termination, and protection requirements still determine the usable communication distance.

📡

Factory Sensor Network

The ADM3490ARZ can connect a controller to remote sensors over a noise-resistant balanced RS-485 bus. Its 10 Mbps maximum rate supports high-refresh sensor traffic, while the reduced slew rate reduces the fast-edge content that can couple into adjacent machinery and sensitive analog circuits. The transceiver should be located close to the line connector, with the A and B conductors routed as a matched pair and common-mode transients handled by appropriately selected protection devices. A 3.3 V supply also permits direct interfacing with modern embedded controllers, subject to the input and output logic levels defined in the manufacturer datasheet.

🏠

Building Control Network

The ADM3490ARZ is suitable for controller nodes in building-management networks where reliable communication must coexist with lighting, switching, and relay noise. The differential receiver rejects common-mode disturbance that would corrupt a single-ended link, and the reduced-slew-rate driver lowers EMI compared with a faster-edge implementation. In a panel design, terminate only the physical ends of the bus, avoid unnecessary cable stubs, and place surge protection near the external connector. The 3.3 V operating supply supports low-power nodes, and the shutdown function can reduce consumption when a controller periodically powers down its bus interface.

🔧

Instrumentation Data Link

The ADM3490ARZ can carry commands and measurement data between an instrumentation controller and remote test equipment over a balanced RS-422 or RS-485 connection. A 10 Mbps ceiling allows the link to service higher-rate digital payloads while the controlled transition rate improves compatibility with longer cables and sensitive test environments. Keep the bus driver near the connector to minimize stub lengths, and observe the receiver's common-mode range and enabled-state behavior. The low-power 3.3 V architecture is useful in compact instrumentation, although the system designer must confirm cable-length timing margins and grounding strategy.

🖥️

Embedded Controller Communication

The ADM3490ARZ provides a compact interface between an embedded controller and a 3.3 V RS-485 peripheral bus. The driver and receiver permit bidirectional half-duplex communication when the circuit uses the appropriate enable controls, while 5 V logic interoperability expands compatibility with mixed-voltage equipment. Because the part supports up to 32 bus nodes, it can consolidate several remote modules without exceeding the stated receiver loading. Firmware must control driver enable so that multiple transmitters do not contend on the bus, and the PCB should preserve symmetry between the A and B routes to minimize differential-mode noise pickup.

🔌

Robust Field-Bus Gateway

The ADM3490ARZ can serve as the physical-layer element in a field-bus gateway that translates between an embedded processor and an external RS-485 network. Its 10 Mbps capability supports burst data transfer, and the reduced slew rate helps limit emissions in compact equipment where connector filtering and board area are constrained. Place the transceiver near the edge connector, use a continuous ground reference under the pair, and include protection selected for the cable's surge and ESD environment. The shutdown feature may be used during low-activity periods, but the system must ensure that bus contention and receiver enable timing remain compatible with the network protocol.

What are the key specifications of ADM3490ARZ that engineers should know?
The ADM3490ARZ is a 3.3 V, 10 Mbps RS-485/RS-422 differential transceiver with one driver, one receiver, 12 kΩ receiver input impedance, and an 8-SOIC package. According to the Analog Devices manufacturer datasheet, it supports 5 V logic interoperability, reduced slew rates for low EMI, shutdown operation, and thermal shutdown protection. Its receiver input impedance allows as many as 32 transceivers on one bus.
Where can I download the ADM3490ARZ datasheet PDF?
The official ADM3490 datasheet and documentation are available on the Analog Devices product page at https://www.analog.com/en/products/adm3490.html. The manufacturer page identifies the current device as a 3.3 V, reduced-slew-rate RS-485/RS-422 transceiver and provides the Data Sheet, marked Rev. E, together with selection tables and product documentation.
Where is the ADM3490ARZ pinout located?
The ADM3490ARZ pinout is shown in the pin-configuration diagram and pin-description table of the Analog Devices ADM3490 manufacturer datasheet. The device uses an 8-SOIC package with RO, receiver-enable, driver-enable, driver-input, ground, differential bus, and supply functions. Use the manufacturer diagram when assigning PCB tracks because enable-pin polarity and bus-pin names are critical to correct transceiver operation.
What is the maximum data rate of ADM3490ARZ?
The ADM3490ARZ supports data rates up to 10 Mbps. According to the Analog Devices manufacturer datasheet, the ADM3485, ADM3490, and ADM3491 family supports the 10 Mbps data-rate option, whereas the ADM3483 and ADM3488 options are specified for 250 kbps. The reduced-slew-rate implementation controls edge energy to limit EMI while preserving high communication throughput.
Is ADM3490ARZ suitable for industrial RS-485 networks?
The ADM3490ARZ is suitable for industrial RS-485 networks that require a 3.3 V transceiver with up to 10 Mbps operation. Its EIA RS-485 compliance, 12 kΩ receiver input impedance, reduced slew rate, shutdown function, and ability to support up to 32 transceivers address typical industrial bus requirements. Protection components and cable-length derating should still be selected for the installation environment.
What can replace ADM3490ARZ as a drop-in part?
The closest drop-in choices are same-footprint members of the Analog Devices ADM348x/ADM349x family, including ADM3485ARZ, ADM3491ARZ, and ADM3490EARZ, plus the MAX3490ECSA from Maxim Integrated when its electrical requirements match the design. Confirm duplex mode, data rate, enable logic, ESD level, and pin assignments before substitution. A package match alone does not guarantee identical field behavior.
Is ADM3490ARZ the same as ADM3485EARZ?
No, ADM3490ARZ and ADM3485EARZ are related 3.3 V, 10 Mbps RS-485/RS-422 transceivers in 8-SOIC packages, but they are not identical products. The ADM3490ARZ is the original ADM3490 device, while the ADM3485EARZ belongs to the ADM3485E family associated with enhanced 15 kV ESD protection. Their enable behavior and protection levels must be checked against the target circuit before interchange.
When should I choose ADM3490ARZ over ADM3488ARZ?
Choose ADM3490ARZ when the RS-485/RS-422 link must operate faster than 250 kbps; the ADM3490ARZ supports up to 10 Mbps. The ADM3488ARZ belongs to the 250 kbps family and is more appropriate for longer, slower industrial links where maximum data rate is unnecessary. Both use 3.3 V operation and reduced-slew-rate signaling, but the maximum timing rate differs by a factor of 40.
ADM3490ARZ vs ADM3491ARZ: which is better for a full-duplex link?
ADM3491ARZ is the better selection when the board requires the full-duplex configuration in the ADM349x family, while ADM3490ARZ is associated with the family's half-duplex RS-485 use case. Both are 3.3 V, 10 Mbps-class transceivers in 8-SOIC packages. Verify the manufacturer pin diagram because bus wiring, driver enable usage, and full-duplex versus half-duplex topology change the required board connections.
What is the best Maxim Integrated equivalent for ADM3490ARZ?
The MAX3490ECSA from Maxim Integrated is the relevant cross-brand equivalent identified for comparison with ADM3490ARZ. It is a 3.3 V RS-485/RS-422 transceiver in an 8-SOIC package, making it the relevant footprint candidate for a drop-in review. Confirm its data rate, enable polarity, receiver thresholds, bus loading, thermal limits, and protection ratings against the ADM3490ARZ before production use.
Where can I buy ADM3490ARZ online?
Use the Request a Quote form on this XAIPART page to request current availability, unit pricing, and lead time for the ADM3490ARZ. The part is identified as an 8-SOIC RS-422/RS-485 transceiver manufactured by Analog Devices. Quote requests allow the exact suffix and delivery configuration to be confirmed without relying on a stale distributor listing or an unrelated reel-code variant.
What is the price of ADM3490ARZ?
Current ADM3490ARZ pricing is shown through the Request a Quote form on this page. The request should specify the Analog Devices ADM3490ARZ manufacturer part number, package, and required quantity. Because component pricing and availability can change, use the form for the current commercial response rather than a historical catalog amount.
What is the lead time for ADM3490ARZ?
The current lead time for ADM3490ARZ should be requested through the Request a Quote form on this page. The component is manufactured by Analog Devices and is offered in an 8-SOIC package. Include your required quantity, target date, and approved delivery location so the commercial response can reflect the correct production and logistics conditions.
Is ADM3490ARZ in stock?
Current ADM3490ARZ stock status should be confirmed through the Request a Quote form on this page. Because the exact MPN, quantity, and delivery schedule determine the commercial response, submit those requirements together. The device is an Analog Devices 8-SOIC, 3.3 V RS-485/RS-422 transceiver capable of 10 Mbps operation.
How should an RS-485 bus be routed around ADM3490ARZ?
Route the ADM3490ARZ differential bus pair as a tightly coupled pair over a continuous reference plane and keep the transceiver close to the connector. The manufacturer datasheet's reduced-slew-rate architecture lowers EMI, but good layout remains essential. Place termination and protection parts where they do not interrupt the pair, avoid stubs on unused nodes, and follow the datasheet for bus biasing and connector surge protection.
What design trade-offs does ADM3490ARZ offer compared with slower RS-485 transceivers?
The ADM3490ARZ trades lower communication bandwidth for faster 10 Mbps operation compared with the 250 kbps ADM3483 and ADM3488 options. The reduced slew rate limits high-frequency EMI, but cable length, propagation delay, connector behavior, and receiver timing still determine whether a long physical link can operate reliably. Use the manufacturer timing and common-mode specifications to verify the complete channel.

Справочные инженерные данные для ADM3490ARZ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose ADM3490ARZ when the design requires a 3.3 V RS-485 or RS-422 transceiver with up to 10 Mbps operation, reduced-slew-rate signaling, 5 V logic interoperability, and an 8-SOIC footprint. Select ADM3488ARZ instead when the bus is intentionally limited to 250 kbps, such as a longer or slower legacy network where the higher ADM3490ARZ rate is unnecessary. Evaluate ADM3491ARZ for the family's full-duplex configuration and confirm that its control and bus assignments match the PCB. Use ADM3490EARZ when enhanced 15 kV ESD protection is important for the external connector environment. MAX3490ECSA is the relevant cross-brand option for footprint-compatible sourcing, but its data-rate timing, receiver thresholds, enable polarity, and protection levels should be reviewed before substitution. In every case, confirm the manufacturer pin diagram and implement proper bus termination, biasing, and contention control.

Сравнение с аналогами

Параметр Этот товар ADM3485ARZ ADM3486ARZ ADM3488ARZ ADM3491ARZ ADM3490EARZ MAX3490ECSA
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Maxim Integrated
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Interface Standards RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485 RS-422 and RS-485
Number of Drivers 1 1 1 1 1 1 1
Number of Receivers 1 1 1 1 1 1 1

Ключевые отличия

  • Provides substantially higher link rate than the 250 kbps ADM3488 option (против ADM3488ARZ)
  • Maintains the same 3.3 V and 8-SOIC implementation as the ADM3490E alternative (против ADM3490EARZ)
  • Uses the same core RS-485/RS-422 function and reduced-slew-rate approach as ADM3485 (против ADM3485ARZ)
  • Combines a compact SOIC footprint with cross-brand sourcing options (против MAX3490ECSA)

Заметки по проектированию

Route the ADM3490ARZ A and B conductors as a closely coupled differential pair over a continuous ground plane. Keep the transceiver near the connector, avoid stubs on unused bus nodes, and maintain symmetrical spacing to minimize differential-mode emissions and susceptibility. Place termination and protection components near the cable interface, but keep switching nodes and digital edges away from the bus pair. Use the manufacturer pin configuration and recommended-layout guidance when assigning the SOIC-8 footprint.

Do not enable the driver and receiver simultaneously unless the protocol and bus topology require that state. Firmware must release the bus before another node transmits, preventing driver contention and excess current. Check the active-low receiver-enable function and the DE driver-enable polarity against the firmware and pull-up or pull-down arrangement. Also confirm that the selected alternative's enable behavior matches the ADM3490ARZ rather than relying on the common package name alone.

The reduced slew rate is intended to lower EMI, but PCB and cable layout still determine radiated and conducted noise. Keep the bus path short from transceiver to connector, use a solid reference plane, avoid split-plane crossings, and provide a low-impedance ground return. External cables should include appropriately rated surge and ESD protection. Verify that added protection capacitance does not distort the intended 10 Mbps signal and that the bus remains within the receiver's common-mode limits.

Place the local 3.3 V bypass capacitor close to the VCC and ground pins, with the return connected directly to the device ground. The bypass network should suppress supply noise without creating long current loops in the differential pair. Check the complete supply range and current draw against the Analog Devices manufacturer datasheet, especially when the shutdown function is active or the transceiver operates at the stated maximum bus-loading limit.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The ADM3490 is an industrial interface IC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation in the manufacturer's current product documentation or declaration files.

Похожие запросы

adm3490arz reel7 adm3490arz datasheet ADM3490ARZ pinout ADM3490ARZ datasheet pdf ADM3490ARZ 8-SOIC ADM3490ARZ 10Mbps RS-485 ADM3490ARZ 3.3V transceiver ADM3490ARZ equivalent ADM3490ARZ replacement ADM3490ARZ vs MAX3490ECSA ADM3490ARZ industrial bus Analog Devices ADM3490ARZ

Связанные компоненты & термины

Analog Devices ADM3490ARZ ADM3490 ADM3485ARZ ADM3486ARZ ADM3488ARZ ADM3491ARZ ADM3490EARZ MAX3490ECSA RS-485 RS-422 differential line transceiver interface IC 3.3 V power supply 10 Mbps data rate 250 kbps data rate reduced slew rate receiver input impedance 12 kΩ common-mode range 5 V logic interoperability 8-SOIC SOIC package family surface-mount technology industrial automation EIA RS-422 EIA RS-485
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ