Renesas Electronics

ISL8323IB-T - Dual 60Ω SPST Analog Switch | Renesas

Артикул: ISL8323IB-T ✓ Активен
12 V Vdss 100 pA Id 60 ohm Rds(on) 8-SOIC, 3.90 mm width Package
MOQ: 1 |

ISL8323IB-T Обзор

Renesas Electronics ISL8323IB-T is a low-voltage, single-supply dual analog switch containing two independently controlled, normally open SPST switches. Each switch presents a specified on-resistance of 60 ohm, and the device is packaged in an 8-SOIC for surface-mount assembly. The switch family is designed for precision signal routing in low-voltage systems operating from a single supply up to 12 V.

An analog switch is an integrated interface IC that routes signals between terminals with controlled impedance. A single-pole, single-throw, or SPST, switch has one conducting path when enabled and an open circuit when disabled. The ISL8323 uses two such paths in one package, making it useful when a design needs to isolate, disconnect, or select two analog signals without using mechanical relays.

The primary electrical characteristics include two switch circuits, 60 ohm on-resistance, and normally open contacts. The manufacturer datasheet information identifies maximum charge injection of 5 pC, off-state channel capacitance of 9 pF, maximum off-state leakage current of 100 pA, and crosstalk of -85 dB at 1 MHz. These parameters determine how much switching transients and signal coupling can affect sensitive downstream circuits.

The ISL8323 family supports single-supply operation, with the documented supply range extending to 12 V. Its low-voltage architecture is appropriate for battery-powered instruments, portable measurement equipment, automated test systems, and low-voltage control systems. Two separate switches can route independent control or sensor signals while sharing a common supply and ground reference.

Use the ISL8323IB-T when normally open behavior is required. The related ISL8324 provides normally closed switches, while the ISL8325 combines one normally open and one normally closed switch for SPDT-style routing. Because contact state changes the logic behavior, these family members are not automatic drop-in substitutes for an existing normally open design.

Layout should minimize trace length around the switched nodes, maintain a continuous ground reference, and keep sensitive signal paths away from noisy supply and control routes. Confirm the control levels, input voltage range, break-before-make behavior, and application leakage budget against the manufacturer datasheet before production release.

This product page combines the switch configuration, electrical limits, package information, family distinctions, and application guidance needed to evaluate the ISL8323IB-T and identify a valid replacement without relying on packaging suffix changes alone.

Аналоги без доработки для ISL8323IB-T — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ISL8323IB-T (тот же форм-фактор и посадочное место) — отличается по Package, Switch Configuration.

Renesas Electronics
Package: 8-SOIC, 0.154 inch (3.90 mm) width
Switch Configuration: 2 x SPST, 1:1
Сравнить с ISL8323IB-T →

ISL8323IB

✅ Прямая замена
Renesas Electronics
📦 8-SOIC
2 circuits · 2 x SPST, 1:1 · 60 ohm · Single supply · Single to +12 V · 5 pC maximum per channel · 9 pF · 100 pA maximum

Уточнить цену

Открыть даташит →

ISL8323IBZ-T

✅ Прямая замена
📦 8-SOIC
Electrical characteristics are shown as identical, including 5 pC maximum charge injection, 9 pF off-state capacitance, 100 pA maximum leakage, and -85 dB crosstalk at 1 MHz.

📋 Справочный аналог (нет в каталоге)

ISL8323IB-T Максимальные параметры и электрические характеристики

Number of Switch Circuits 2 circuits
Switch Configuration 2 independent normally open SPST switches
On-Resistance 60 ohm
Maximum Charge Injection 5 pC
Off-State Channel Capacitance 9 pF
Maximum Off-State Leakage Current 100 pA
Crosstalk -85 dB at 1 MHz
Maximum Supply Voltage 12 V
Рабочая температура -40°C to +85°C
Корпус 8-SOIC, 3.90 mm width
Тип монтажа Surface mount
Supply Type Single supply
Switch Type SPST, 1:1
Contact State Normally open
Product Family ISL8323 low-voltage analog switch series

Руководство по цоколевке ISL8323IB-T в корпусе 8-soic, 3.90 mm width

Цоколевка для ISL8323IB-T (корпус 8-soic, 3.90 mm width). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 8-soic, 3.90 mm width для ISL8323IB-T

Нет подробных данных о распиновке для ISL8323IB-T.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ISL8323IB-T подходит для 6 применениеs: Portable Measurement Instrumentation, Battery-Powered Sensor Interfaces, Automated Test Equipment Signal Routing, Low-Voltage Control Signal Multiplexing, Precision Analog Signal Isolation, Industrial Data Acquisition.

📱

Portable Measurement Instrumentation

The ISL8323IB-T fits portable measurement equipment that must route or disconnect two low-level analog signals while operating from a single supply. Its two normally open SPST paths provide independent isolation, and the 60 ohm on-resistance keeps insertion loss manageable for many sensor-conditioning stages. The 5 pC maximum charge injection is especially relevant when the switch drives a high-impedance amplifier input. Place the device close to the protected sensor node, use short traces, and verify that switching transients remain below the measurement uncertainty.

🧩

Battery-Powered Sensor Interfaces

The ISL8323IB-T can isolate two sensor signals in battery-operated equipment where a single low-voltage supply is required. Its normally open contacts remain disconnected until enabled, helping prevent unwanted loading or signal coupling between channels. The maximum off-state leakage of 100 pA is useful for high-source-impedance sensing, while the 9 pF off-state capacitance contributes to input loading. Engineers should account for both values when setting source impedance, settling time, and the available power budget.

🖥️

Automated Test Equipment Signal Routing

The ISL8323IB-T supports two independently switched analog paths in automated test systems where a fixture must connect, isolate, or route DUT signals. A 60 ohm on-resistance is practical for many low-frequency and moderate-impedance test paths. For high-impedance nodes, however, the 5 pC charge-injection limit requires careful timing around switch commands. The 8-SOIC package also allows routing away from a connector-heavy edge region while preserving a conventional surface-mount assembly process.

⚡

Low-Voltage Control Signal Multiplexing

The two normally open switches in the ISL8323IB-T can select or disconnect separate control signals in a low-voltage embedded control subsystem. With a documented operating range extending to 12 V, the device suits systems using a single supply rather than split positive and negative rails. Its -85 dB crosstalk at 1 MHz indicates strong isolation between channels at that test frequency. Verify actual signal bandwidth and logic thresholds because those application conditions are not fully characterized by the crosstalk point alone.

🔧

Precision Analog Signal Isolation

The ISL8323IB-T is appropriate for isolating one analog signal while routing another in precision front ends. Its normally open behavior provides a defined disconnected state, and the 100 pA maximum off-state leakage limits leakage from high-impedance sources. The 5 pC charge injection must still be included in the settling-time analysis after each control transition. Use a nearby reference return path and avoid long, parallel switched-node traces to minimize capacitive pickup and maintain isolation performance.

🏭

Industrial Data Acquisition

The ISL8323IB-T can route two inputs in compact industrial data-acquisition equipment where the analog front end must support channel selection or galvanic-style functional isolation within a single-supply architecture. Its -40°C to +85°C operating-temperature range supports industrial environments when the complete assembly meets its own thermal requirements. The 60 ohm on-resistance should be included in the input-buffer design, and the 9 pF off-state capacitance should be checked against required settling time and bandwidth.

Сводка рекомендуемых товаров

ISL8323IB Renesas Electronics Используется в: Portable Measurement Instrumentation, Battery-Powered Sensor Interfaces, Automated Test Equipment Signal Routing, Low-Voltage Control Signal Multiplexing, Precision Analog Signal Isolation, Industrial Data Acquisition ISL8323IBZ-T Same-family dual SPST switch order variant Используется в: Portable Measurement Instrumentation, Battery-Powered Sensor Interfaces, Automated Test Equipment Signal Routing, Low-Voltage Control Signal Multiplexing, Precision Analog Signal Isolation, Industrial Data Acquisition
What is the Renesas ISL8323IB-T?
The Renesas ISL8323IB-T is a low-voltage, single-supply analog switch containing two independent normally open SPST switches. According to the Renesas ISL8323/ISL8324/ISL8325 datasheet, each switch has a specified on-resistance of 60 ohm. The device is offered in an 8-SOIC surface-mount package and is intended for precision signal routing, isolation, and channel-selection applications.
What are the key specifications of ISL8323IB-T?
The ISL8323IB-T provides two normally open SPST switch circuits with 60 ohm on-resistance in an 8-SOIC package. The Renesas datasheet information lists maximum charge injection of 5 pC, off-state channel capacitance of 9 pF, maximum off-state leakage current of 100 pA, and crosstalk of -85 dB at 1 MHz. These figures identify the device as a low-voltage precision switch rather than a power switch.
Where can I download the ISL8323IB-T datasheet PDF?
The ISL8323IB-T datasheet is available through the Renesas ISL8323 product page, which links the product documentation for the ISL8323, ISL8324, and ISL8325 family. The manufacturer data identifies the device as a dual, normally open SPST analog switch with 60 ohm on-resistance in an 8-SOIC package. Use the manufacturer pin-description table when assigning signals and control inputs.
Where is the pinout for ISL8323IB-T?
The ISL8323IB-T pinout is defined in the pin-configuration and description tables of the Renesas ISL8323/ISL8324/ISL8325 datasheet. The device uses an 8-SOIC package and contains two normally open switches. Before assigning PCB nets, verify every control, input, output, supply, and ground connection against that table because different suffix codes can change packing or grade without changing the functional architecture.
What is the difference between ISL8323 and ISL8324?
The ISL8323 contains two normally open switches, while the ISL8324 contains two normally closed switches. According to the Renesas ISL8323 family datasheet, the ISL8325 provides one normally open and one normally closed switch and can be used as an SPDT. Consequently, an ISL8324 or ISL8325 is not a functional drop-in replacement when a circuit requires two normally open paths.
Is ISL8323IB-T the same as ISL8323IBZ-T?
The ISL8323IBZ-T and ISL8323IB-T identify Renesas order variants associated with the same ISL8323 dual-SPST device family and 8-SOIC footprint. Their electrical characteristics are shown as equivalent in comparison data, but engineers should confirm ordering information, temperature grade, packing, and marking directly from Renesas before treating either suffix as a procurement substitution.
Can ISL83072EIBZA replace ISL8323IB-T?
The ISL83072EIBZA cannot be assumed to be a drop-in replacement for the ISL8323IB-T without verifying its complete electrical specification. Comparison information identifies both devices as packaged analog-switch products, but the available records do not establish identical on-resistance, control levels, leakage, charge injection, or pin mapping. A PCB-level substitution should therefore remain unapproved until Renesas or the component manufacturer confirms pin compatibility.
What is the best drop-in replacement for ISL8323IB-T?
The closest documented drop-in candidates are the ISL8323IB and ISL8323IBZ-T order variants because they retain the same dual, normally open SPST architecture and 8-SOIC package family. According to Renesas family documentation, changing to the ISL8324 or ISL8325 changes the contact state and therefore changes circuit behavior. Verify the exact suffix, grade, and marking before releasing a replacement to production.
When should I choose ISL8323IB-T instead of another dual SPST switch?
Choose the ISL8323IB-T when two normally open analog paths, 60 ohm on-resistance, low charge injection, and an 8-SOIC footprint match the design requirements. The Renesas datasheet information highlights 5 pC maximum charge injection, 9 pF off-state capacitance, and -85 dB crosstalk at 1 MHz. Select a different switch if the application requires normally closed contacts, lower resistance, higher voltage, or a different logic-control interface.
Is ISL8323IB-T suitable for battery-powered equipment?
The ISL8323IB-T is suitable for many battery-powered and portable applications because it is a low-voltage, single-supply analog switch with operation extending to 12 V. Its two normally open paths can isolate or route signals while the device is disabled. Power-budget the complete system rather than the switch alone, and confirm supply compatibility, control thresholds, leakage, and switch timing in the manufacturer datasheet.
Does ISL8323IB-T cause charge injection when switching?
Yes, the ISL8323IB-T can inject charge into the switched signal when its control state changes. The Renesas datasheet information specifies maximum charge injection of 5 pC. This can create a transient in high-impedance analog nodes, so place input and output impedances carefully and confirm that the resulting error remains below the accuracy budget of the measured or controlled signal.
What is the on-resistance and leakage of ISL8323IB-T?
The ISL8323IB-T has a specified on-resistance of 60 ohm and maximum off-state leakage current of 100 pA. According to the manufacturer family documentation, these values apply to the dual normally open SPST switch architecture in the 8-SOIC package. The on-resistance contributes insertion loss, while off-state leakage can matter when switching very high-impedance sensors or precision measurement nodes.
Where can I buy ISL8323IB-T and request current lead time?
Use the Request a Quote form on this page to request the current ISL8323IB-T price, stock position, lead time, and order quantity. The manufacturer suffix indicates an 8-SOIC packaged orderable configuration, but live commercial terms can change by date and quantity. The form allows purchasing teams to obtain current channel and manufacturing information without relying on a stale list price.
What is the current price of ISL8323IB-T?
The current commercial price for the ISL8323IB-T depends on quantity, packaging, and current market conditions. Submit the Request a Quote form on this page with your required quantity and delivery location to obtain the current quotation. The structured price evidence for this exact orderable MPN is empty, so this page does not present an unverified or outdated price figure.
Is ISL8323IB-T currently in stock?
Current stock for ISL8323IB-T should be confirmed through the Request a Quote form on this page because inventory changes by order quantity and packaging configuration. The manufacturer family remains documented as a low-voltage dual-SPST analog switch in an 8-SOIC package. For production planning, request both the committed quantity and the expected lead time rather than treating a distributor search result as a guaranteed allocation.
How should ISL8323IB-T be laid out on a PCB?
Place the ISL8323IB-T close to the switched signal paths and maintain a low-impedance ground connection. Route control inputs away from sensitive analog nodes, keep switched traces short, and use the manufacturer footprint for the 8-SOIC package. According to the family datasheet, the device has 9 pF off-state capacitance and -85 dB crosstalk at 1 MHz, making short routing and solid grounding important for preserving isolation.

Справочные инженерные данные для ISL8323IB-T — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ISL8323IB-T when the design requires two independent normally open SPST paths, a specified 60 ohm on-resistance, low charge injection, and an 8-SOIC footprint. It is well matched to low-voltage instrumentation, sensor isolation, and test-signal routing where a single supply extending to 12 V is used. The ISL8323IB is the closest documented order variant when its exact suffix, marking, and procurement configuration meet the board requirements. ISL8323IBZ-T is another same-family option with identical listed electrical characteristics. Do not select the ISL8324 or ISL8325 as direct replacements because their normally closed or mixed contact states alter switching behavior. Before finalizing any substitution, verify the complete pin map, control levels, supply limits, temperature grade, and lifecycle status against the manufacturer datasheet.

Сравнение с аналогами

Параметр Этот товар ISL8323IB ISL8323IBZ-T
Brand Renesas Electronics Renesas Electronics Renesas Electronics
Package 8-SOIC 8-SOIC 8-SOIC
Switch Circuits 2 circuits 2 circuits 2 circuits
Switch Configuration 1:1 SPST, normally open 1:1 SPST, normally open 1:1 SPST, normally open
On-Resistance 60 ohm 60 ohm 60 ohm
Maximum Charge Injection 5 pC 5 pC 5 pC
Off-State Channel Capacitance 9 pF 9 pF 9 pF
Maximum Off-State Leakage Current 100 pA 100 pA 100 pA
Crosstalk -85 dB at 1 MHz -85 dB at 1 MHz -85 dB at 1 MHz
Operating Temperature -40°C to +85°C -40°C to +85°C -40°C to +85°C

Ключевые отличия

  • Two independent normally open analog paths in one package (против ISL8323IB)
  • Low charge injection for precision signal isolation (против ISL8323IBZ-T)
  • Documented channel isolation (против ISL8323IB)

Заметки по проектированию

Treat the switched nodes as sensitive analog signals. The documented 9 pF off-state capacitance can create settling transients, while 5 pC maximum charge injection can disturb a high-impedance receiver when a control input changes. Keep input and output impedance values realistic, allow adequate settling time after switching, and verify the complete source-switch-load network with an oscilloscope before fixing acquisition timing.

Place the ISL8323IB-T close to the two switched signal paths and use the manufacturer 8-SOIC footprint. Keep input and output traces short and avoid routing them beneath noisy digital or switching-supply traces. Connect the device ground to the quiet analog ground reference with a low-impedance path, and keep the enable or control traces away from high-impedance switched nodes to reduce coupled transitions.

Do not treat the ISL8324 or ISL8325 as automatic replacements: their normally closed or mixed contact states change the circuit logic. Also verify that the on-resistance of 60 ohm is acceptable for the source and load, and that the 100 pA off-state leakage is below the measurement error budget. Confirm the exact ordering suffix, grade, package marking, and control polarity before production procurement.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The target MPN is a general-purpose analog switch rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated for this exact orderable MPN.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ISL8323IB-T ISL8323IB-T datasheet ISL8323IB-T datasheet pdf ISL8323IB-T pinout ISL8323IB-T equivalent ISL8323IB-T replacement ISL8323IB-T vs ISL8323IB Renesas ISL8323IB-T ISL8323IB-T 60 ohm SPST ISL8323IB-T 8-SOIC ISL8323IB-T analog switch application ISL8323IB-T price

Связанные компоненты & термины

Renesas Electronics ISL8323IB-T ISL8323IB ISL8323IBZ-T ISL8323 ISL8324 ISL8325 dual analog switch SPST normally open switch normally closed switch SPDT interface IC semiconductor on-resistance charge injection crosstalk off-state leakage channel capacitance single-supply operation 8-SOIC surface mount battery-powered equipment signal isolation RoHS REACH
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ