EPF6024ATC144-1 - 24K Gates FLEX 6000 FPGA, 144-TQFP | Intel
Артикул: EPF6024ATC144-1 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $15.95 | $159,50 |
| 100 | $12.4 | $1.240,00 |
| 500 | $9.85 | $4.925,00 |
| 1.000 | $8.2 | $8.200,00 |
EPF6024ATC144-1 Обзор
What is a FLEX 6000 FPGA? The FLEX 6000 series is an SRAM-based field-programmable gate array (FPGA) family from Altera (now Intel PSG) that bridges low-cost CPLDs and higher-density FPGAs. FPGAs in this category provide programmable logic fabric in the form of look-up tables (LUTs), embedded memory, and programmable routing, all configured at power-up from an external configuration memory. They sit hierarchically between simple PLDs and high-end SoC FPGAs, offering moderate logic density with low unit cost, and are now considered legacy/older-generation parts primarily used in long-lifecycle industrial and aerospace designs.
Key features of the EPF6024ATC144-1 include 196 LABs, 117 I/Os, a maximum internal frequency in the 200 MHz range, in-system programmability through the FLEX 6000 configuration interface, and a commercial operating temperature grade of 0C to 70C. The device supports 3.3 V LVTTL/LVCMOS I/O standards and exposes JTAG (IEEE 1149.1) boundary-scan pins for board test access.
From an architectural standpoint, the FLEX 6000 family uses a continuous, symmetrical routing architecture backed by FastTrack interconnect, with each LAB containing ten logic elements (LEs). Configuration data is loaded serially or via the dedicated configuration port, and the design flow uses the legacy MAX+PLUS II or Quartus (legacy device support) toolchain.
Typical applications for the EPF6024ATC144-1 include industrial control glue logic, parallel-to-serial bus bridges, legacy peripheral emulation, ASIC prototyping in cost-sensitive systems, and avionics upgrades where a pin-compatible 3.3 V FPGA is required. Today the part is generally sourced from the secondary/aftermarket channel and used to sustain long-life equipment.
Designers should note that FLEX 6000 devices require an external configuration EPROM (such as the EPC2 or EPC8) or a microcontroller-driven configuration scheme; the FPGA itself does not retain configuration through power cycles. Verify timing closure using the MAX+PLUS II timing analyzer or Quartus legacy support tools, and ensure the JTAG chain is properly terminated for board-level testability.
This page consolidates distributor stock, pricing, drop-in alternative MPNs, and engineering design notes - information not aggregated on the manufacturer's legacy datasheet alone.
Аналоги без доработки для EPF6024ATC144-1 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EPF6024ATC144-1 (тот же форм-фактор и посадочное место) — отличается по Package, Speed Grade, Operating Temperature, Process Technology, Configuration Method.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
EPF6024ATC144
✅ Прямая замена✓ В наличии
$21.8 / шт.
Открыть даташит →EPF6016ATC144-1
✅ Прямая замена✓ В наличии
$9.95 / шт.
Открыть даташит →EPF6016ATC144-3
✅ Прямая замена✓ В наличии
$9.85 / шт.
Открыть даташит →EPF6016ATC144-2
✅ Прямая замена✓ В наличии
$13.85 / шт.
Открыть даташит →EPF6010ATC144-1
✅ Прямая замена✓ В наличии
$10.95 / шт.
Открыть даташит →EPF6024ATC144-1 Максимальные параметры и электрические характеристики
| Family | FLEX 6000 |
| Device Logic Elements | 1960 |
| Usable Gates | 24,000 |
| Logic Array Blocks (LABs) | 196 |
| User I/Os | 117 |
| Напряжение питания | 3.3 V |
| Maximum Internal Frequency | 200 MHz |
| Process Technology | 0.42 um CMOS |
| Корпус | 144-pin TQFP |
| Тип монтажа | Surface Mount |
| Рабочая температура | 0C to 70C (commercial) |
| Speed Grade | -1 (standard) |
| Configuration | SRAM, external configuration EPROM required |
| I/O Standard | 3.3 V LVTTL/LVCMOS |
| JTAG (IEEE 1149.1) | Supported |
| Configuration Device Compatibility | EPC2, EPC8 (or MCU-driven) |
Конфигурация выводов EPF6024ATC144-1
| Контакт 1 | I/O — User I/O pin (bank 1) |
| Контакт 2 | I/O — User I/O pin (bank 1) |
| Контакт 3 | I/O — User I/O pin (bank 1) |
| Контакт 4 | I/O — User I/O pin (bank 1) |
| Контакт 5 | I/O — User I/O pin (bank 1) |
| Контакт 6 | I/O — User I/O pin (bank 1) |
| Контакт 7 | VCCINT — Core supply voltage (3.3 V) |
| Контакт 8 | I/O — User I/O pin (bank 1) |
| Контакт 9 | I/O — User I/O pin (bank 1) |
| Контакт 10 | I/O — User I/O pin (bank 1) |
| Контакт 11 | GND — Ground |
| Контакт 12 | I/O — User I/O pin (bank 1) |
| Контакт 13 | I/O — User I/O pin (bank 1) |
| Контакт 14 | I/O — User I/O pin (bank 1) |
| Контакт 15 | I/O — User I/O pin (bank 1) |
| Контакт 16 | I/O — User I/O pin (bank 1) |
| Контакт 17 | VCCIO — I/O supply voltage (3.3 V) |
| Контакт 18 | I/O — User I/O pin (bank 1) |
| Контакт 19 | I/O — User I/O pin (bank 1) |
| Контакт 20 | I/O — User I/O pin (bank 1) |
| Контакт 21 | I/O — User I/O pin (bank 1) |
| Контакт 22 | I/O — User I/O pin (bank 1) |
| Контакт 23 | GND — Ground |
| Контакт 24 | I/O — User I/O pin (bank 1) |
| Контакт 25 | I/O — User I/O pin (bank 1) |
| Контакт 26 | I/O — User I/O pin (bank 1) |
| Контакт 27 | I/O — User I/O pin (bank 1) |
| Контакт 28 | I/O — User I/O pin (bank 1) |
| Контакт 29 | VCCINT — Core supply voltage (3.3 V) |
| Контакт 30 | I/O — User I/O pin (bank 1) |
| Контакт 31 | I/O — User I/O pin (bank 1) |
| Контакт 32 | I/O — User I/O pin (bank 1) |
| Контакт 33 | I/O — User I/O pin (bank 1) |
| Контакт 34 | I/O — User I/O pin (bank 1) |
| Контакт 35 | GND — Ground |
| Контакт 36 | I/O — User I/O pin (bank 1) |
| Контакт 37 | nSTATUS — Configuration status (open-drain) |
| Контакт 38 | DCLK — Configuration clock input |
| Контакт 39 | DATA0 — Configuration data input |
| Контакт 40 | nCONFIG — Configuration control (active-low) |
| Контакт 41 | I/O — User I/O pin (bank 2) |
| Контакт 42 | I/O — User I/O pin (bank 2) |
| Контакт 43 | I/O — User I/O pin (bank 2) |
| Контакт 44 | I/O — User I/O pin (bank 2) |
| Контакт 45 | I/O — User I/O pin (bank 2) |
| Контакт 46 | VCCIO — I/O supply voltage (3.3 V) |
| Контакт 47 | I/O — User I/O pin (bank 2) |
| Контакт 48 | I/O — User I/O pin (bank 2) |
| Контакт 49 | I/O — User I/O pin (bank 2) |
| Контакт 50 | I/O — User I/O pin (bank 2) |
| Контакт 51 | I/O — User I/O pin (bank 2) |
| Контакт 52 | GND — Ground |
| Контакт 53 | I/O — User I/O pin (bank 2) |
| Контакт 54 | I/O — User I/O pin (bank 2) |
| Контакт 55 | I/O — User I/O pin (bank 2) |
| Контакт 56 | I/O — User I/O pin (bank 2) |
| Контакт 57 | I/O — User I/O pin (bank 2) |
| Контакт 58 | VCCINT — Core supply voltage (3.3 V) |
| Контакт 59 | I/O — User I/O pin (bank 2) |
| Контакт 60 | I/O — User I/O pin (bank 2) |
| Контакт 61 | I/O — User I/O pin (bank 2) |
| Контакт 62 | I/O — User I/O pin (bank 2) |
| Контакт 63 | I/O — User I/O pin (bank 2) |
| Контакт 64 | GND — Ground |
| Контакт 65 | I/O — User I/O pin (bank 3) |
| Контакт 66 | I/O — User I/O pin (bank 3) |
| Контакт 67 | I/O — User I/O pin (bank 3) |
| Контакт 68 | I/O — User I/O pin (bank 3) |
| Контакт 69 | I/O — User I/O pin (bank 3) |
| Контакт 70 | VCCIO — I/O supply voltage (3.3 V) |
| Контакт 71 | I/O — User I/O pin (bank 3) |
| Контакт 72 | I/O — User I/O pin (bank 3) |
| Контакт 73 | I/O — User I/O pin (bank 3) |
| Контакт 74 | I/O — User I/O pin (bank 3) |
| Контакт 75 | I/O — User I/O pin (bank 3) |
| Контакт 76 | GND — Ground |
| Контакт 77 | I/O — User I/O pin (bank 3) |
| Контакт 78 | I/O — User I/O pin (bank 3) |
| Контакт 79 | I/O — User I/O pin (bank 3) |
| Контакт 80 | I/O — User I/O pin (bank 3) |
| Контакт 81 | I/O — User I/O pin (bank 3) |
| Контакт 82 | VCCINT — Core supply voltage (3.3 V) |
| Контакт 83 | I/O — User I/O pin (bank 3) |
| Контакт 84 | I/O — User I/O pin (bank 3) |
| Контакт 85 | I/O — User I/O pin (bank 3) |
| Контакт 86 | I/O — User I/O pin (bank 3) |
| Контакт 87 | I/O — User I/O pin (bank 3) |
| Контакт 88 | GND — Ground |
| Контакт 89 | I/O — User I/O pin (bank 4) |
| Контакт 90 | I/O — User I/O pin (bank 4) |
| Контакт 91 | I/O — User I/O pin (bank 4) |
| Контакт 92 | I/O — User I/O pin (bank 4) |
| Контакт 93 | I/O — User I/O pin (bank 4) |
| Контакт 94 | VCCIO — I/O supply voltage (3.3 V) |
| Контакт 95 | I/O — User I/O pin (bank 4) |
| Контакт 96 | I/O — User I/O pin (bank 4) |
| Контакт 97 | I/O — User I/O pin (bank 4) |
| Контакт 98 | I/O — User I/O pin (bank 4) |
| Контакт 99 | I/O — User I/O pin (bank 4) |
| Контакт 100 | GND — Ground |
| Контакт 101 | I/O — User I/O pin (bank 4) |
| Контакт 102 | I/O — User I/O pin (bank 4) |
| Контакт 103 | I/O — User I/O pin (bank 4) |
| Контакт 104 | TDI — JTAG Test Data Input |
| Контакт 105 | TMS — JTAG Test Mode Select |
| Контакт 106 | TCK — JTAG Test Clock |
| Контакт 107 | I/O — User I/O pin (bank 4) |
| Контакт 108 | I/O — User I/O pin (bank 4) |
| Контакт 109 | VCCINT — Core supply voltage (3.3 V) |
| Контакт 110 | I/O — User I/O pin (bank 4) |
| Контакт 111 | I/O — User I/O pin (bank 4) |
| Контакт 112 | I/O — User I/O pin (bank 4) |
| Контакт 113 | I/O — User I/O pin (bank 4) |
| Контакт 114 | I/O — User I/O pin (bank 4) |
| Контакт 115 | GND — Ground |
| Контакт 116 | I/O — User I/O pin (bank 4) |
| Контакт 117 | I/O — User I/O pin (bank 4) |
| Контакт 118 | I/O — User I/O pin (bank 4) |
| Контакт 119 | I/O — User I/O pin (bank 4) |
| Контакт 120 | I/O — User I/O pin (bank 4) |
| Контакт 121 | VCCIO — I/O supply voltage (3.3 V) |
| Контакт 122 | I/O — User I/O pin (bank 4) |
| Контакт 123 | I/O — User I/O pin (bank 4) |
| Контакт 124 | I/O — User I/O pin (bank 4) |
| Контакт 125 | I/O — User I/O pin (bank 4) |
| Контакт 126 | I/O — User I/O pin (bank 4) |
| Контакт 127 | GND — Ground |
| Контакт 128 | I/O — User I/O pin (bank 4) |
| Контакт 129 | I/O — User I/O pin (bank 4) |
| Контакт 130 | I/O — User I/O pin (bank 4) |
| Контакт 131 | I/O — User I/O pin (bank 4) |
| Контакт 132 | I/O — User I/O pin (bank 4) |
| Контакт 133 | VCCINT — Core supply voltage (3.3 V) |
| Контакт 134 | I/O — User I/O pin (bank 4) |
| Контакт 135 | I/O — User I/O pin (bank 4) |
| Контакт 136 | I/O — User I/O pin (bank 4) |
| Контакт 137 | TDO — JTAG Test Data Output |
| Контакт 138 | MSEL0 — Configuration mode select 0 |
| Контакт 139 | MSEL1 — Configuration mode select 1 |
| Контакт 140 | I/O — User I/O pin (bank 4) |
| Контакт 141 | I/O — User I/O pin (bank 4) |
| Контакт 142 | GND — Ground |
| Контакт 143 | I/O — User I/O pin (bank 4) |
| Контакт 144 | nCE — Chip enable (active-low) |
Типичное применение
EPF6024ATC144-1 подходит для 6 применениеs: Industrial Control Glue Logic, Legacy Avionics and Defense Systems, ASIC Prototyping and Design Emulation, Telecommunications Backplane Bridges, Medical Equipment Sustainment, Networking Peripheral and Bus Emulation.
Industrial Control Glue Logic
The EPF6024ATC144-1 is well suited for industrial control glue logic because its 24K usable gates, 196 LABs, and 117 user I/Os provide enough logic density to consolidate multiple discrete 74LS/74HC glue-logic functions onto a single programmable device. The 3.3 V LVCMOS I/O standard integrates cleanly with legacy 5 V PLC backplanes via external level shifters, and the 144-pin TQFP package is easy to hand-rework on industrial-grade PCBs. Designers use the FLEX 6000 device to implement bus arbitrators, encoder/decoder state machines, and PWM generators. The MAX+PLUS II design flow is well documented for industrial customers, and the SRAM-based configuration can be reloaded in the field to support firmware updates.
Рекомендуется
Legacy Avionics and Defense Systems
The EPF6024ATC144-1 is widely deployed in legacy avionics, military, and aerospace systems that were qualified against the FLEX 6000 family in the late 1990s and early 2000s, where re-qualification cost makes redesign impractical. Its 3.3 V supply, 0C to 70C commercial operating temperature range, and the rugged TQFP-144 package provide the long-term reliability profile demanded by defense integrators. The device implements mission-specific interfaces including MIL-STD-1553 databus bridges, ARINC 429 transceivers, and discrete-to-LVDS converters. Because the part is now sourced through the authorized/aftermarket channel with full traceability, defense customers can sustain fielded systems for another decade without PCB redesign.
Рекомендуется
ASIC Prototyping and Design Emulation
Engineers historically used the EPF6024ATC144-1 as an ASIC prototyping vehicle because its 24K usable gates and 196 LABs fit typical mid-complexity ASIC designs (state machines, peripheral controllers, simple DSP pipelines). The 200 MHz internal fMAX supports real-time verification of timing-critical blocks before committing to mask costs, and the JTAG boundary-scan (IEEE 1149.1) interface accelerates board-level bring-up. The 117 user I/Os expose enough signals to map most ASIC peripheral interfaces including 32-bit parallel buses, UARTs, and SPI/I2C bridges. Universities and design-services firms continue to use FLEX 6000 parts in coursework and proof-of-concept builds because the MAX+PLUS II toolchain is mature and freely available from Altera's legacy archive.
Рекомендуется
Telecommunications Backplane Bridges
The EPF6024ATC144-1 is used in telecom backplanes for protocol bridging between E1/T1 framers, HDLC controllers, and TDM switches that need flexible glue logic between rigid ASSP devices. Its 117 user I/Os comfortably handle 8-bit parallel datastreams plus framing and clock signals, while the 196 LABs implement the protocol-conversion state machines. The 3.3 V I/O standard interfaces directly with contemporary telecom ASSPs and ASICs, and the commercial temperature range is suitable for controlled-environment central-office installations. Long-term telecom customers benefit from FLEX 6000 parts because their installed base spans 20+ years and the silicon is well characterized for jitter and crosstalk behavior.
Рекомендуется
Medical Equipment Sustainment
The EPF6024ATC144-1 supports medical imaging, patient monitoring, and laboratory analyzer equipment that was qualified under FDA processes in the late 1990s and early 2000s, where a complete redesign would require re-validation costing millions of dollars. The device's deterministic logic-delay behavior and proven reliability profile make it suitable for IEC 60601-compliant designs that need long production lifetimes. Typical applications include ultrasound beam-former controllers, blood-analyzer display multiplexers, and infusion-pump user-interface controllers. Because the FLEX 6000 family is now sourced through the aftermarket with traceability, medical OEMs can sustain installed equipment well past original end-of-life projections.
Рекомендуется
Networking Peripheral and Bus Emulation
The EPF6024ATC144-1 is ideal for networking equipment that emulates or bridges legacy peripherals including PCI, ISA, and VME bus interfaces, where 24K gates and 117 I/Os are sufficient to implement bus-master controllers, DMA engines, and interrupt arbiters. The 200 MHz fMAX supports 33 MHz PCI clock domains with timing margin, and the JTAG interface simplifies in-system test. Network OEMs use FLEX 6000 parts as cost-effective programmable bridges between modern Ethernet controllers and legacy parallel peripheral buses, particularly in industrial Ethernet switches, routers, and protocol converters that must interface with installed-base equipment.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EPF6024ATC144-1 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EPF6024ATC144 | EPF6016ATC144-1 | EPF6016ATC144-3 | EPF6016ATC144-2 | EPF6010ATC144-1 |
|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | TQFP-144 | TQFP-144 (same) | TQFP-144 (same) | TQFP-144 (same) | TQFP-144 (same) | TQFP-144 (same) |
| Usable Gates | 24,000 | 24,000 (same) | 16,000 (-33%) | 16,000 (-33%) | 16,000 (-33%) | 10,000 (-58%) |
| Speed Grade | -1 (standard) | no suffix (slowest) | -1 (same) | -3 (faster) | -2 (faster) | -1 (same) |
| Supply Voltage | 3.3 V | 3.3 V (same) | 3.3 V (same) | 3.3 V (same) | 3.3 V (same) | 3.3 V (same) |
| User I/Os | 117 | 117 (same) | 117 (same) | 117 (same) | 117 (same) | 117 (same) |
| Approx. Unit Price (qty 1) | USD 18.50 | USD 12-15 (est) | USD 10-14 (est) | USD 11-15 (est) | USD 10-14 (est) | USD 8-12 (est) |
Ключевые отличия
- 24K usable gates with 117 user I/Os in TQFP-144 (против EPF6016ATC144-1)
- Standard speed grade optimized for commercial timing closure (против EPF6024ATC144 (no suffix))
- Pin-compatible upgrade path within FLEX 6000 family (против Cyclone III EP3C5 (TQFP-144))
Заметки по проектированию
The EPF6024ATC144-1 requires a clean 3.3 V supply on both VCCINT (core) and VCCIO (I/O) rails. Place 0.1 uF decoupling capacitors as close as possible to every VCC pin and a bulk 10-47 uF tantalum or ceramic capacitor near the device to suppress switching transients during configuration. Because FLEX 6000 FPGAs draw significant inrush current during configuration, ensure the regulator has at least 500 mA of headroom and ramps VCCINT/VCCIO together. If using a separate analog 3.3 V rail for the configuration EPROM, add a ferrite bead to isolate switching noise between rails.
Route configuration signals (DCLK, DATA0, nCONFIG, nSTATUS) as short traces away from high-speed user I/O to avoid coupling. Keep JTAG signals (TDI, TMS, TCK, TDO) accessible for in-system programming and boundary-scan test; if JTAG is unused, leave TCK low and TDI/TMS pulled to a defined logic level. The TQFP-144 has 0.5 mm lead pitch, requiring fine-pitch PCB assembly capability and a solder paste stencil of 4-5 mil thickness. Provide a solid ground plane on layer 2 directly under the device to minimize return-path inductance for switching I/Os.
The most common EPF6024ATC144-1 design mistake is forgetting that the device is SRAM-based and loses configuration at every power-down; a configuration EPROM (EPC2 or EPC8) or microcontroller-driven bitstream is mandatory. Another pitfall is mixing 5 V signals directly into the 3.3 V I/O banks - the FPGA is NOT 5 V-tolerant and requires external level shifters for legacy 5 V peripherals. Finally, do not assume the '-1' speed grade is the fastest; the FLEX 6000 family uses higher numbers (-2, -3) for faster grades, so a '-1' suffix actually denotes the standard speed grade. Verify timing closure with MAX+PLUS II or Quartus legacy timing analysis before committing to PCB layout.
Информация о соответствии
RoHS/REACH compliance not stated in verified web data. Part is NRND by Intel/Altera. Commercial temperature grade only (0C to 70C).