Renesas Electronics

DG408DYZ - 8:1 CMOS Analog Multiplexer | Renesas Electronics

Артикул: DG408DYZ ✓ Активен
100 ohm maximum Rds(on) 16-pin SOIC Package
MOQ: 1 |

DG408DYZ Обзор

The Renesas Electronics DG408DYZ is a single 8:1 monolithic CMOS analog multiplexer with a 100 ohm maximum on-resistance, bidirectional analog channels, and a 16-pin SOIC package rated for industrial temperatures from -40 C to +85 C. It includes eight analog switches, TTL/CMOS-compatible channel decoding, an internal voltage reference for logic thresholds, and an ENABLE input for device selection when several multiplexers share a bus.

An analog multiplexer is a switch matrix that routes one of several signal sources onto a shared output path. The DG408 belongs to the analog switch and multiplexer hierarchy, where its CMOS construction supports low power consumption and wide input voltage range compared with relay-based selectors. Its 8:1 configuration gives an eight-channel instrument, data-acquisition system, or automated test fixture a compact way to share one analog front end among multiple sources.

The device uses three address lines for binary channel selection and an active-low or active-high ENABLE control according to the manufacturer logic specification. A TTL/CMOS-compatible decoder accepts standard logic levels, while the internal voltage reference establishes stable switching thresholds across supply conditions. Because the analog paths are bidirectional, the same DG408DYZ can be used to route a common signal toward one of eight external terminals as well as to select an incoming source.

The DG408 series is documented as a drop-in replacement for the popular DG508A and DG509A families. Renesas also positions the DG408 and DG409 as pin-compatible single-ended 8-channel and differential 4-channel options respectively. The industrial DG408DYZ grade is suited to test and measurement, data acquisition, signal routing, control systems, and industrial interface boards where a SOIC footprint and deterministic logic decoding are preferred.

Bidirectional operation simplifies PCB routing because the channel pins are not restricted to a dedicated input or output role. Nevertheless, keep all external analog nodes within the absolute maximum ratings listed in the manufacturer datasheet, and use input protection networks when signals can exceed the selected supply rails. Account for the 100 ohm maximum on-resistance when calculating source impedance, especially when driving high-impedance sensors or precision measurement chains.

This page combines the manufacturer family information with distributor specifications, package details, equivalent-device references, and practical design guidance. It also identifies where a drop-in comparison should focus on package geometry, logic decoding, channel count, on-resistance, signal range, and temperature grade rather than on the DG408 name alone.

Аналоги без доработки для DG408DYZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с DG408DYZ (тот же форм-фактор и посадочное место) — отличается по Package, On-Resistance, Channel Matching, Multiplexer Configuration, Switch Architecture.

Maxim Integrated
Package: 16-SOIC narrow
On-Resistance: 100Ω maximum
Channel Matching: 8Ω maximum
Сравнить с DG408DYZ →
Analog Devices
Package: 16-SOIC
Channel Matching: 8 ohm maximum
Multiplexer Configuration: 8:1
Сравнить с DG408DYZ →

DG408DY+

✅ Прямая замена
Analog Devices
📦 16-pin SOIC
8:1 · 8 channels · 100 ohm maximum · 8 ohm maximum · 9 ohm maximum · Single 8-channel · Monolithic CMOS · TTL/CMOS-compatible

Уточнить цену

Открыть даташит →

DG408DY+

✅ Прямая замена
Analog Devices
📦 16-pin SOIC
8:1 · 8 channels · 100 ohm maximum · 8 ohm maximum · 9 ohm maximum · Single 8-channel · Monolithic CMOS · TTL/CMOS-compatible

Уточнить цену

Открыть даташит →

DG408DY+

✅ Прямая замена
Analog Devices
📦 16-pin SOIC
8:1 · 8 channels · 100 ohm maximum · 8 ohm maximum · 9 ohm maximum · Single 8-channel · Monolithic CMOS · TTL/CMOS-compatible

Уточнить цену

Открыть даташит →

DG408DY+

✅ Прямая замена
Analog Devices
📦 16-pin SOIC
8:1 · 8 channels · 100 ohm maximum · 8 ohm maximum · 9 ohm maximum · Single 8-channel · Monolithic CMOS · TTL/CMOS-compatible

Уточнить цену

Открыть даташит →

TSX-310

✅ Прямая замена
📦 16-pin SOIC
Same 8:1 multiplexing role in a 16-pin SOIC; published on-resistance is lower at approximately 80 ohm versus 100 ohm, a 20% reduction

📋 Справочный аналог (нет в каталоге)

DG408DYZ Характеристики

Multiplexer Configuration Single 8:1
Number of Circuits 1 circuit
Number of Channels 8 channels
On-Resistance 100 ohm maximum
Analog Signal Direction Bidirectional
Switch Architecture Eight analog switches with TTL/CMOS-compatible digital decode
Process Technology CMOS
Logic Threshold Reference Internal voltage reference
Device Selection Control ENABLE input
Корпус 16-pin SOIC
Тип монтажа Surface mount
Диапазон рабочих температур -40 C to +85 C
Industrial Grade Yes
Legacy Compatibility Drop-in replacement for DG508A and DG509A series devices

Руководство по цоколевке DG408DYZ в корпусе 16-pin soic

Цоколевка для DG408DYZ (корпус 16-pin soic). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 16-pin soic для DG408DYZ

Нет подробных данных о распиновке для DG408DYZ.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

DG408DYZ подходит для 6 применениеs: Multichannel Data Acquisition, Automated Test Equipment Signal Routing, Industrial Sensor Interface, Programmable Signal Conditioning, Battery-Powered Monitoring Equipment, Communication and RF Signal Routing.

📊

Multichannel Data Acquisition

The DG408DYZ fits a data-acquisition front end that selects among eight analog sources with one shared amplifier chain. Its bidirectional analog paths allow either source selection or common-signal distribution, while the TTL/CMOS-compatible decoder and ENABLE input can be driven directly by a microcontroller or FPGA. The published 100 ohm maximum on-resistance must be included in the source-impedance budget, especially when measuring high-impedance sensors. Use the manufacturer pin table to assign tracks and confirm the allowed signal range before routing external inputs.

🏭

Automated Test Equipment Signal Routing

In automated test equipment, the DG408DYZ can route one of eight test points, excitation nodes, or instrument channels through a common fixture interface. The ENABLE input allows a controller to disable the mux during fixture transitions, while the binary decoder selects the active path. Because the analog channels are bidirectional, the same device can also distribute a reference or stimulus to one selected branch. Maintain consistent impedance across all eight routes so switching does not create measurement errors, and include protection ahead of externally accessible nodes.

🧩

Industrial Sensor Interface

The DG408DYZ can consolidate eight analog sensor outputs onto a single controller input, reducing the number of separate front-end channels in industrial monitoring equipment. Its -40 C to +85 C industrial temperature range suits equipment exposed to variable ambient conditions, and the TTL/CMOS-compatible control inputs simplify interfacing with standard digital logic. The 100 ohm maximum on-resistance can become significant with high-impedance sensors, so place a low-input-impedance buffer after the mux when full-scale accuracy is required. Keep sensor returns and mux ground paths within the device's rated common-mode limits.

🔧

Programmable Signal Conditioning

A programmable signal-conditioning system can use the DG408DYZ to route different amplifier, filter, or reference taps into a common processing chain. This approach makes the board flexible without requiring a separate connector for every source and allows software to configure the channel address through the digital decoder. Bidirectional operation supports feedback-style measurements as well as source selection. The mux's 100 ohm maximum on-resistance introduces channel-dependent loading unless all branches are matched, so characterize the complete network and place any precision amplifier immediately after the selected node.

🔋

Battery-Powered Monitoring Equipment

Portable monitoring equipment can use the DG408DYZ to reduce the number of analog inputs handled by a low-power controller. The CMOS multiplexer is designed for low-power operation, and the ENABLE control lets firmware disable the device when no channel needs to be observed. The shared-output topology also reduces board area compared with eight separate signal paths. Verify supply-current behavior and analog signal limits in the manufacturer datasheet for the intended battery voltage, and use a buffered output when the source impedance approaches the mux's 100 ohm maximum on-resistance.

🌐

Communication and RF Signal Routing

The DG408DYZ can select low-level analog branches in communication equipment, instrumentation, or controlled test paths where a compact SOIC multiplexer is preferred. Bidirectional channels make it possible to route a common signal toward one of eight destinations as well as select a source for a receiver chain. The 100 ohm maximum on-resistance is modest for precision measurement but must be checked against the termination and noise requirements of the application. Keep sensitive traces away from digital address and ENABLE lines, and confirm the permitted signal swing in the manufacturer datasheet.

What is the DG408DYZ and what is its key specification?
The DG408DYZ is a single 8:1 monolithic CMOS analog multiplexer from Renesas Electronics, packaged in a 16-pin SOIC. Its principal electrical specification is a maximum on-resistance of 100 ohm, with bidirectional analog channels and an industrial operating temperature range of -40 C to +85 C. The device combines eight analog switches with TTL/CMOS-compatible channel decoding and an ENABLE input for use in shared-bus systems.
Where can I download the DG408DYZ datasheet PDF?
The DG408DYZ datasheet is available through the Renesas DG408 product page, with the manufacturer part-detail link also serving as the authoritative document entry point. The documentation describes the DG408 and DG409 family, including the eight-switch array, digital decode circuit, internal logic-threshold reference, and ENABLE input. Use the Renesas document for the final pin configuration, absolute maximum ratings, and DC timing characteristics when laying out a new PCB.
Is the DG408DYZ pin-compatible with the DG508A series?
Yes. Renesas describes the DG408 family as drop-in replacements for the popular DG508A and DG509A series devices. The DG408DYZ provides the single-ended 8-channel implementation in a 16-pin SOIC, while the DG409 implements the differential 4-channel configuration. Confirm the exact pin mapping, supply range, and logic polarity in the manufacturer datasheet before replacing an installed DG508A design.
What is the difference between DG408DYZ and DG408DY?
DG408DYZ and DG408DY identify closely related orderable forms of the Renesas DG408 8:1 CMOS analog multiplexer family. The published descriptions for both identify an 8:1 multiplexer with a 100 ohm on-resistance in a 16-pin SOIC. The orderable suffix may encode packaging, temperature, or regional order conventions, so verify the temperature grade, package marking, and quantity configuration against the manufacturer ordering information before treating them as interchangeable.
What is the best drop-in replacement for the DG408DYZ?
The closest drop-in choices are the Vishay DG408-series devices and the Texas Instruments TSX-310 when they are offered in the same 16-pin SOIC configuration. Both provide the 8:1 multiplexing function used in data-acquisition and test systems, but on-resistance, logic levels, supply range, and switching speed must be checked against the DG408DYZ datasheet. For identical family behavior, the Renesas DG408DY and DG408DY+ variants are the lowest-risk choices.
Can the TSX-310 replace the DG408DYZ without a PCB change?
The TSX-310 can serve as a drop-in candidate when it is supplied in the matching 16-pin SOIC configuration, because it is listed among the equivalent functions for the DG408 family. A mechanical footprint match is not sufficient by itself: verify supply voltage, address and ENABLE logic levels, on-resistance, analog signal range, and switching time in both datasheets. Review the control pin sequence carefully because active-low and active-high conventions can differ between families.
How do I choose between the DG408DYZ and a Vishay DG408 alternative?
Choose the DG408DYZ when exact continuity with the Renesas DG408 family, the published 100 ohm maximum on-resistance, and industrial-grade operation from -40 C to +85 C are primary requirements. Choose a Vishay DG408-family device when supply availability or a second sourcing channel is more important and its datasheet confirms equivalent pinout, logic decoding, signal range, and switching performance. Both families target the same legacy DG508A-style multiplexing use case.
Is the DG408DYZ suitable for a data-acquisition system?
Yes, the DG408DYZ is suitable for a data-acquisition front end that must select among eight analog sources. Its bidirectional analog paths permit flexible routing, and the TTL/CMOS-compatible decoder simplifies control from a microcontroller or FPGA. Account for the 100 ohm maximum on-resistance, which can affect source impedance and measurement accuracy when the selected channel drives a high-impedance amplifier. Add protection and buffering as required by the external signal amplitudes.
What can replace the DG408DYZ in a test fixture?
The DG408DY, DG408DY+, Vishay DG408-series parts, and a suitably packaged TSX-310 are candidate replacements for a test fixture. The Renesas variants are the most direct choices within the same manufacturer family, while the Vishay and Texas Instruments devices provide cross-brand sourcing options. Before substitution, confirm that the analog path supports the fixture voltage range, the logic decoder uses compatible levels, and the 100 ohm DG408DYZ on-resistance does not impair the measurement.
Where can I buy the DG408DYZ online?
The DG408DYZ is offered through authorized electronics distributors, with the manufacturer part-detail page also supporting sourcing inquiries. Use the Request a Quote form on this page to request current pricing, stock, and lead time for the exact 16-pin SOIC orderable MPN. Specify whether tube, tape-and-reel, or another permitted packing method is required, since the same electrical device can carry different orderable suffix codes.
What is the current price of the DG408DYZ?
The current commercial price is best obtained through the Request a Quote form on this page because distributor pricing and availability change with order quantity and inventory. Request the exact DG408DYZ MPN rather than a family-level DG408 designation, and state the required quantity and packing format. The listed distributor reference includes a unit-price indication for DG408DYZ, while the structured pricing fields on this page are refreshed by the platform.
How long is the lead time for the DG408DYZ?
Request the current lead time through the Request a Quote form on this page, specifying the required quantity and whether the order must ship as a tube or tape-and-reel reel. Lead time varies with inventory, order configuration, and manufacturer allocation, so it should be confirmed against the exact orderable MPN. The DG408DYZ is also identified by the closely related DG408DYZ-T order code in the manufacturer product family.
Is the DG408DYZ currently in stock?
Stock status should be confirmed through the Request a Quote form on this page because availability can change after the distributor data is retrieved. Distributor listings for DG408DYZ and DG408DYZ-T have shown stock indications, but those records are point-in-time observations rather than a guaranteed allocation. Provide your required quantity, target date, and preferred packing method so the supplier can return a current availability commitment.
What are the key specifications engineers should know about DG408DYZ?
The DG408DYZ is an 8:1 CMOS analog multiplexer with a 100 ohm maximum on-resistance, bidirectional signal paths, TTL/CMOS-compatible decoding, an ENABLE input, and a 16-pin SOIC package. Its industrial temperature range is -40 C to +85 C. Renesas also identifies the family as a drop-in replacement for the DG508A and DG509A series, providing useful context for legacy board upgrades.
What are the main design considerations when routing analog signals through the DG408DYZ?
The main design consideration is the 100 ohm maximum on-resistance, which becomes part of the signal-source impedance and can reduce accuracy when driving a high-impedance amplifier. Keep traces short, use a grounded guard or reference plane where appropriate, and place protection components close to external connectors. Confirm the permitted analog and supply ranges in the manufacturer datasheet, because those limits are not repeated in this page.

Справочные инженерные данные для DG408DYZ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the DG408DYZ when the design requires a single-ended 8:1 CMOS multiplexer in a 16-pin SOIC and you want continuity with the DG408, DG508A, and DG509A legacy families. Its 100 ohm maximum on-resistance is the principal engineering constraint, so buffered high-impedance sensing may be necessary. Select the Renesas DG408DY or DG408DY+ when the same electrical family and footprint are required but a different orderable suffix better matches procurement. A Vishay DG408-family device is appropriate when establishing a cross-brand sourcing path while retaining the same multiplexing architecture. Consider the TSX-310 when its lower cited on-resistance improves signal-chain performance, but verify supply range, control polarity, switching timing, and analog limits before PCB substitution. For differential 4-channel routing, a DG409-family device is the functional choice rather than any single-ended alternative listed here.

Сравнение с аналогами

Параметр Этот товар DG408DY DG408DY+ DG408DY DG408DY+ TSX-310
Manufacturer Renesas Electronics Renesas Electronics Renesas Electronics Vishay Intertechnology Vishay Intertechnology Texas Instruments
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Multiplexer Configuration Single 8:1 Single 8:1 Single 8:1 8-channel 8-channel 8:1 analog multiplexer
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Maximum On-Resistance 100 ohm 100 ohm 100 ohm 100 ohm class 100 ohm class Approximately 80 ohm
Analog Channel Direction Bidirectional Bidirectional Bidirectional Bidirectional Bidirectional Bidirectional
Technology CMOS CMOS CMOS CMOS CMOS CMOS
Operating Temperature Range -40 C to +85 C Industrial grade Industrial grade Industrial grade Industrial grade -40 C to +85 C
Logic Compatibility TTL/CMOS-compatible decode with ENABLE input TTL/CMOS-compatible decode with ENABLE input TTL/CMOS-compatible decode with ENABLE input TTL/CMOS-compatible decode TTL/CMOS-compatible decode TTL/CMOS-compatible control
Legacy Replacement Target DG508A and DG509A series DG508A/DG509A family DG508A/DG509A family High-performance CMOS mux family High-performance CMOS mux family 8-channel analog multiplexer

Ключевые отличия

  • Single-ended 8-channel multiplexing with bidirectional analog paths (против TSX-310)
  • Documented compatibility with established DG508A and DG509A designs (против TSX-310)
  • Internal threshold reference and ENABLE control in the same 16-pin SOIC (против MAX4634)

Заметки по проектированию

Treat the mux on-resistance as part of the source impedance. At the 100 ohm maximum, attenuation and thermal noise become more significant when the selected branch drives a high-impedance amplifier. Place a low-input-impedance buffer after the mux when the sensor impedance is high, and keep channel routing geometry similar so switching does not create gain or phase discontinuities between channels.

Route the eight analog paths as compact, mutually separated traces and connect the multiplexer ground reference to the quiet analog ground region. Keep the address and ENABLE traces away from sensitive analog nets. Because the channels are bidirectional, provide input protection at external connectors and ensure every external node remains inside the absolute maximum ratings in the manufacturer datasheet.

Do not assume that every part labeled DG408 is interchangeable solely from its multiplex ratio. Check the 16-pin SOIC pin map, supply-voltage range, ENABLE polarity, address convention, analog signal range, and switching specifications. Also verify the exact orderable suffix and packing method, because tape-and-reel, tube, and temperature-grade order codes can describe different purchasing configurations of the same device family.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The industrial temperature grade is documented, but no specific RoHS, REACH, halogen-free, or conflict-minerals declaration was identified in the available manufacturer and distributor records.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

dg408dyz datasheet dg408dyz pinout dg408dyz equivalent dg408dyz drop-in replacement dg408dyz vs TSX-310 dg408dyz 8:1 mux dg408dyz 16 pin SOIC dg408dyz on resistance dg408dyz schematic Renesas dg408dyz dg408dyz price dg408dyz stock DG408 8 channel CMOS analog multiplexer DG408DY SOIC pinout DG408 data acquisition multiplexer

Связанные компоненты & термины

Renesas Electronics DG408DYZ DG408DY DG408DY+ DG408DYZ-T Vishay Intertechnology TSX-310 DG408 DG409 DG508A DG509A analog multiplexer analog switch CMOS analog multiplexer channel decoder bidirectional analog switch on-resistance TTL/CMOS-compatible logic ENABLE input 16-pin SOIC SOIC package family surface-mount package data acquisition automated test equipment industrial sensor interface
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ