Renesas Electronics

ISL8491IB-T - 5V RS-485/RS-422 Transceiver | Renesas

Артикул: ISL8491IB-T ✓ Активен
5 V Vdss RS-422 and RS-485 Rds(on) 14-pin SOIC Package
MOQ: 1 |

ISL8491IB-T Обзор

Renesas ISL8491IB-T is a single RS-485 and RS-422 transceiver operating from a 5 V supply and supporting data rates up to 5 Mbps. The device is offered in a 14-pin SOIC package and combines one driver and one receiver in a single integrated circuit. Its RS-485/RS-422 interface capability, low-power BiCMOS implementation, and slew-rate-limited operation make it suitable for balanced industrial communication links that require compact signal conditioning.

A transceiver is an interface IC that converts logic-level signals into differential bus levels and converts received differential signals back into logic levels. RS-422 supports point-to-point balanced communication, while RS-485 supports longer multipoint buses. The ISL8491IB-T places the balanced driver and receiver in one 14-SOIC package, reducing component count on communication interfaces that require both transmission and reception.

The ISL8491IB-T operates from 5 V, supports communications through 5 Mbps, and includes ESD protection according to its product descriptions. Its slew-rate-limited behavior helps control the transition rate applied to the bus, which is important when reducing high-frequency harmonics and signal-integrity problems in cables, connectors, and long wiring. The 14-pin SOIC package supports conventional surface-mount assembly and is widely compatible with industrial control-board layouts.

The device is based on a low-power, high-speed BiCMOS process. Combining bipolar and CMOS characteristics supports the interface requirements of a 5 V communication circuit while retaining the low-power characteristics expected in industrial equipment. The integrated driver-receiver arrangement simplifies bidirectional bus connections, although protocol direction control, termination, biasing, and isolation remain functions of the complete interface circuit.

Typical uses include industrial automation controllers, factory data-collection equipment, building-control gateways, instrumentation, and embedded RS-485 or RS-422 ports. It can also serve as the physical-layer interface in systems that exchange commands and sensor data across a balanced bus. The 5 Mbps capability is relevant for factory and industrial links, while the slew-rate limiting should be considered when selecting cable length, topology, and termination.

PCB design should follow the pin-description table in the manufacturer datasheet when assigning signal traces and supply connections. Keep the transceiver close to the bus connector, provide the required local supply decoupling, and place termination and fail-safe bias components where they can be reached without long stubs. Confirm the selected connector, cable, and grounding strategy against the communication standard used by the system.

This product page combines the verified 5 V, 5 Mbps, RS-485/RS-422, ESD, BiCMOS, and 14-SOIC characteristics with practical interface-design guidance, sourcing information, and pin-compatible alternatives. It also helps engineers identify which details must still be confirmed in the manufacturer datasheet before schematic release or PCB sign-off.

Аналоги без доработки для ISL8491IB-T — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ISL8491IB-T (тот же форм-фактор и посадочное место) — отличается по ESD Protection, Supported Standards.

Renesas Electronics
ESD Protection: ESD-protected device
Supported Standards: RS-485 and RS-422
Сравнить с ISL8491IB-T →

ISL8491IB

✅ Прямая замена
Renesas Electronics
📦 14-SOIC
5 V · Full-duplex transceiver · RS-485 and RS-422 · 1 · 1 · CMOS · Low power · High speed or slew-rate limited

Уточнить цену

Открыть даташит →

ISL8491IBZ-T

✅ Прямая замена
📦 14-SOIC
Same 5 V, 5 Mbps RS-485/RS-422 family with matching 14-SOIC terminals; documented performance is substantially consistent

📋 Справочный аналог (нет в каталоге)

ISL8491IB-T Характеристики

Product Type Single RS-485/RS-422 transceiver
Manufacturer Renesas Electronics
Напряжение питания 5 V
Maximum Data Rate 5 Mbps
Number of Drivers 1
Number of Receivers 1
Supported Standards RS-422 and RS-485
Logic Technology BiCMOS
Slew Rate Slew-rate limited
ESD Protection Present
Корпус 14-pin SOIC
Тип монтажа Surface mount
Статус RoHS Compliant

Руководство по цоколевке ISL8491IB-T в корпусе 14-pin soic

Цоколевка для ISL8491IB-T (корпус 14-pin soic). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 14-pin soic для ISL8491IB-T

Нет подробных данных о распиновке для ISL8491IB-T.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ISL8491IB-T подходит для 6 применениеs: Industrial Automation Bus Interface, Factory Sensor Data Collection, Building Control Gateway, Test and Measurement Instrument, Industrial Motor Controller, Embedded Communication Module.

🏭

Industrial Automation Bus Interface

The ISL8491IB-T fits a 5 V industrial automation node that communicates over a balanced RS-485 or RS-422 bus. Its single integrated driver and receiver reduce the number of interface devices required at the controller boundary, while operation up to 5 Mbps supports relatively fast command and process-data exchanges. The 14-SOIC package simplifies assembly on mixed-signal control boards. Designers should verify enable timing, bus direction control, termination, and fail-safe biasing in the manufacturer datasheet. Slew-rate limiting also makes the interface relevant to factory environments where controlled edge rates and ESD protection help reduce unwanted emissions and transient susceptibility.

📡

Factory Sensor Data Collection

The ISL8491IB-T can serve as the physical-layer transceiver between a data collector and remotely located sensors using an RS-485 balanced bus. Its 5 V operation is compatible with conventional embedded control logic, and the 5 Mbps maximum data rate supports efficient collection of status, configuration, and measurement data. The integrated one-driver, one-receiver arrangement provides a compact implementation without selecting separate transmitter and receiver packages. Cable length and topology should be validated together with slew-rate-limited signaling, while local decoupling and bus termination must follow the manufacturer reference circuit.

🏠

Building Control Gateway

The ISL8491IB-T is suitable for a building-control gateway that links a controller to an RS-485 or RS-422 field network. Its differential transceiver supports noise-resistant communication over wiring that may run near lighting, motors, and switching equipment, while ESD protection adds useful interface robustness. A 14-SOIC package allows the transceiver to be placed near the terminal block and keep sensitive communication routing away from processor and power-conversion areas. Confirm grounding, isolation strategy, termination placement, and updated compliance requirements for the final building-control product.

🔬

Test and Measurement Instrument

The ISL8491IB-T can provide the balanced communication link used by laboratory and field-test equipment that exchanges commands or measurement records with remote fixtures. Its 5 Mbps capability offers useful bandwidth for instrument-control traffic, while the integrated driver and receiver conserve board area in compact instruments. The 14-SOIC package is convenient for mixed-signal PCB assembly, although analog and digital grounds should be managed carefully to prevent bus noise from affecting sensitive measurements. Use the manufacturer pin descriptions to route the transceiver close to the connector and preserve a short return path.

⚙️

Industrial Motor Controller

The ISL8491IB-T can connect an industrial motor controller to external drives, programmable logic controllers, or supervisory equipment over RS-485 or RS-422. Differential signaling is well suited to electrically noisy machinery environments, and the device's ESD protection and slew-rate-limited behavior help control interface stress and emissions. The 5 V supply aligns with many embedded controller rails. The design should separate transceiver routing from high-current motor switching paths, follow the manufacturer grounding guidance, and verify whether the system requires galvanic isolation rather than relying on the integrated device alone.

🧩

Embedded Communication Module

The ISL8491IB-T fits a compact embedded module that exposes an RS-485 or RS-422 port for configuration, diagnostics, or external sensors. One driver and one receiver in a 14-SOIC package allow the module to support bidirectional communication while leaving space for processing and power circuitry. Its 5 V supply and 5 Mbps maximum rate suit short, controlled links. Designers should implement bus-direction control, optional termination, and fail-safe biasing as defined by the manufacturer, and should verify the exact operating-temperature grade and ESD conditions before deploying the module in an enclosure with exposed wiring.

What is the ISL8491IB-T?
The ISL8491IB-T is a single-channel RS-485 and RS-422 transceiver that combines one driver and one receiver in a 14-pin SOIC package. It operates from a 5 V supply and supports data rates up to 5 Mbps. According to the manufacturer datasheet, the device uses a low-power BiCMOS process and provides ESD-protected differential bus communication for industrial and instrumentation systems.
What is the maximum data rate of ISL8491IB-T?
The ISL8491IB-T supports data rates up to 5 Mbps. This makes it suitable for high-speed balanced communication links that must comply with RS-485 or RS-422 signaling. According to the manufacturer datasheet, the device also uses slew-rate limiting, so designers should evaluate edge rate, reflections, cable length, and termination together rather than treating 5 Mbps as the only link-design criterion.
What is the difference between RS-485 and RS-422 for ISL8491IB-T?
Both interfaces use balanced differential signaling, but RS-422 is primarily intended for point-to-point links while RS-485 supports multipoint bus arrangements. The ISL8491IB-T can operate with either standard because its driver and receiver implement the compatible differential signaling functions. The chosen system topology determines termination, biasing, grounding, and driver-enable strategy; the manufacturer datasheet should be used to verify the required external network.
Where can I download the ISL8491IB-T datasheet PDF?
The ISL8491IB-T datasheet and product documentation can be reached through the Renesas product listing linked on this page. The document is identified as the manufacturer datasheet and should be used for the authoritative 14-SOIC pin-description table, recommended application circuit, electrical characteristics, and decoupling details. Request current documentation from Renesas or use the product-page document link if the local copy is unavailable.
Where can I find the ISL8491IB-T pinout?
The ISL8491IB-T pinout is shown in the manufacturer datasheet for the 14-pin SOIC package. Use the pin-description table when assigning driver, receiver, enable, ground, and supply nets because the exact function of every terminal must be confirmed there. The public product summaries identify the package as 14-SOIC but do not reproduce the complete numbered terminal list, so assign PCB nets only after checking the current manufacturer drawing.
Where can I buy ISL8491IB-T online?
The ISL8491IB-T can be requested through the Request a Quote form on this page. The form is the appropriate route for current availability, lot traceability, delivery timing, and minimum-order requirements without relying on a static listing. Because this interface IC may be sourced through different distribution channels, request the exact ISL8491IB-T order code and confirm its 14-SOIC packaging before releasing a purchase order.
What is the price of ISL8491IB-T?
Current commercial terms for ISL8491IB-T should be obtained through the Request a Quote form on this page. The form allows the exact MPN, quantity, and required packaging to be reviewed before an order is placed. Do not use a historical unit price for budgeting a production build because inventory conditions, original manufacturer status, and future supply can affect commercial terms over time.
What is the lead time for ISL8491IB-T?
The current lead time for ISL8491IB-T should be confirmed through the Request a Quote form on this page. Quote review should state the requested quantity, date code requirement, acceptable package, and delivery destination. Engineers should avoid committing a production schedule until both lead time and traceability have been confirmed for the exact ISL8491IB-T order code.
Is ISL8491IB-T in stock?
Current ISL8491IB-T inventory status should be checked through the Request a Quote form on this page. The form provides the fastest route for confirming availability, lot details, and shipment timing for the exact 14-SOIC device. Inventory can vary by manufacturer status and distribution channel, so a previously displayed stock message should not be treated as a current reservation.
ISL8491IB-T vs ISL8491IB - which is better?
The ISL8491IB-T and ISL8491IB are both identified as 5 V, single-driver, single-receiver RS-485/RS-422 transceivers in 14-SOIC packages. Their core electrical function is the same, so the choice commonly depends on order-code packaging and availability rather than interface performance. Confirm the manufacturer suffix definitions and approved assembly format before treating either order code as interchangeable in production.
When should I choose ISL8491IB-T over another RS-485 transceiver?
Choose ISL8491IB-T when the design needs a 5 V, single RS-485/RS-422 transceiver in a 14-SOIC package with operation up to 5 Mbps and ESD protection. Its slew-rate-limited interface is particularly relevant to controlled industrial links. Confirm that the chosen alternative also satisfies the system voltage, data-rate, topology, fail-safe, and thermal requirements rather than selecting only by package count.
Is ISL8491IB-T suitable for industrial automation equipment?
The ISL8491IB-T is suitable for many industrial automation communication interfaces because it supports RS-485 and RS-422 at 5 V and up to 5 Mbps in a 14-SOIC package. The differential driver and receiver are appropriate for balanced field-bus connections between controllers, sensors, and data-acquisition modules. Final suitability depends on cable length, grounding, transient immunity, connector selection, and system-level ESD requirements.
What can replace ISL8491IB-T?
The ISL8491IB and ISL8491IBZ-T are identified in comparison records as compatible 14-SOIC alternatives with matching terminals and substantially consistent performance characteristics. A replacement should still be checked for exact supply voltage, maximum data rate, slew behavior, enable logic, receiver fail-safe operation, and package dimensions. PCB substitution is appropriate only after the manufacturer pinout and electrical tables have been compared line by line.
What is the best drop-in replacement for ISL8491IB-T?
The strongest documented drop-in candidate is the ISL8491IBZ-T because comparison information describes its terminals and package as consistent with the ISL8491IB family and identifies matching functional characteristics. The ISL8491IB is another documented same-family option. Because these records do not establish a broad set of cross-manufacturer equivalents, treat either option as a qualified same-family substitution and verify the current manufacturer datasheet before production release.
What are the key specifications of ISL8491IB-T that engineers should know?
The key ISL8491IB-T specifications are a 5 V supply, operation up to 5 Mbps, one integrated driver and receiver, RS-485/RS-422 compatibility, ESD protection, slew-rate limiting, a low-power BiCMOS implementation, and a 14-pin SOIC package. These parameters position the device for compact balanced industrial links. Confirm exact electrical limits, enable-pin behavior, temperature range, and all terminal names in the manufacturer datasheet.

Справочные инженерные данные для ISL8491IB-T — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose ISL8491IB-T for a compact 5 V RS-485 or RS-422 interface that requires one driver, one receiver, operation up to 5 Mbps, ESD protection, and a 14-SOIC footprint. Its slew-rate-limited behavior is useful when controlled bus transitions and reduced unwanted emissions are priorities. ISL8491IB is a documented same-family option when its order-code and packaging requirements fit the assembly process, while ISL8491IBZ-T offers matching terminals and substantially consistent characteristics for another qualified same-family substitution. Confirm the manufacturer suffix definitions, temperature grade, enable logic, and current availability before ordering. Do not select a smaller-package RS-485 IC solely for pin count; its supply voltage, bus behavior, receiver fail-safe implementation, and external-network requirements may differ. In all cases, use the manufacturer application circuit and pin table as the final design authority.

Сравнение с аналогами

Параметр Этот товар ISL8491IB ISL8491IBZ-T
Brand Renesas Electronics Renesas Electronics Renesas Electronics
Package 14-SOIC 14-SOIC - same 14-SOIC - same
Supply Voltage 5 V 5 V 5 V
Maximum Data Rate 5 Mbps 5 Mbps 5 Mbps
Driver and Receiver Count 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver
Supported Standards RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422
Logic Technology BiCMOS BiCMOS BiCMOS
Slew-Rate Behavior Slew-rate limited Slew-rate limited Slew-rate limited
ESD Protection Present Present Present

Ключевые отличия

  • High-speed balanced communication in a compact package (против ISL8491IB)
  • Documented terminal and package consistency (против ISL8491IBZ-T)
  • Integrated balanced interface (против ISL8491IBZ-T)

Заметки по проектированию

Place the ISL8491IB-T close to the RS-485 or RS-422 connector and keep the balanced traces short and tightly coupled. Route the pair as a differential pair over a continuous reference plane, avoid splitting the ground reference beneath the interface, and keep switching-regulator and high-current motor traces away from the bus nodes. Confirm the exact terminal assignments in the manufacturer pin-description table before assigning nets.

Treat termination, fail-safe biasing, cable length, and topology as one network design. The ISL8491IB-T has slew-rate-limited signaling, which can help control harmonics, but it does not remove the need for a sound bus network. Determine whether termination belongs at both physical ends of a point-to-point RS-422 link or at appropriate locations in an RS-485 topology, and avoid long branches or unnecessary stubs.

Do not substitute an 8-pin transceiver for the 14-pin ISL8491IB-T merely because both support RS-485. The package, terminal count, enable logic, receiver behavior, and supply requirements must all be compatible. Before production release, compare the complete pin-description table, absolute-maximum ratings, recommended operating circuit, and electrical characteristics for the selected substitute against the original design requirements.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

RoHS status is identified by the component listing. Other environmental, automotive, and material-compliance declarations are not stated and therefore remain unknown.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ISL8491IB-T datasheet ISL8491IB-T pinout ISL8491IB-T datasheet pdf ISL8491IB-T equivalent ISL8491IB-T replacement ISL8491IB-T cross reference ISL8491IB-T price ISL8491IB-T stock Renesas ISL8491IB-T ISL8491IB 14-SOIC transceiver ISL8491IB-T RS-485 RS-422 ISL8491IB-T 5Mbps transceiver ISL8491IB-T industrial automation ISL8491IB-T vs ISL8491IB

Связанные компоненты & термины

Renesas Electronics Intersil ISL8491IB-T ISL8491IB ISL8491IBZ-T RS-485 transceiver RS-422 transceiver interface IC communications transceiver driver receiver balanced differential signaling BiCMOS low-power BiCMOS slew-rate limiting 5 Mbps data rate 5 V power supply 14-SOIC package SOIC family surface-mount package ESD protection industrial automation building-control gateway test and measurement RoHS
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ