STMicroelectronics

LM324AWDT - Low-Power Quad Op Amp | STMicroelectronics

Артикул: LM324AWDT ✓ Активен
±15 V (30 V total span) Vdss Low input bias current Id 14-pin SO package Package Internal Speed
MOQ: 1 |

LM324AWDT Обзор

STMicroelectronics LM324AWDT is a low-power, general-purpose quad operational amplifier containing four independent, internally frequency-compensated amplifiers in a 14-pin SO package. The device operates from a single supply or from split dual supplies, with a verified operating capability extending to ±15 V, equivalent to 30 V total supply span. Its four-circuit integration reduces board area and component count in analog signal-conditioning designs.

An operational amplifier is an analog voltage amplifier whose gain, filtering, buffering, and feedback behavior are determined mainly by external components. The LM324 belongs to the general-purpose amplifier hierarchy: op amp, analog amplifier, signal-conditioning IC, and ultimately semiconductor. A quad package contains four amplifiers that may be used independently or together for instrumentation, control, filtering, and signal conversion.

The LM324 family is designed for low power consumption and low input bias current. Internally compensated operation simplifies closed-loop design because no external compensation network is required for typical voltage-feedback use. The four amplifiers are independent, allowing simultaneous sensing and actuation, although the common supply pins mean that all four channels share the same supply-voltage and ground references.

The A designation identifies a distinct qualification or ordering configuration within the LM324 family, while W indicates tape-and-reel packaging and DT identifies the 14-pin small-outline package. Engineers should confirm the exact temperature limits, electrical limits, and qualification status for the selected ordering code in the STMicroelectronics datasheet before using the device in a regulated end application.

Typical uses include low-frequency sensor conditioning, feedback control loops, active filters, audio and communication signal paths, and general analog instrumentation. In a 5 V single-supply system, the common reference arrangement and input/output swing limits remain central design constraints. In split-supply circuits, the device is particularly useful when the signal can swing around 0 V.

Keep input and output voltages within the absolute maximum ratings, observe the input common-mode range, and provide stable bypass capacitance near the supply pins. Because the LM324 is intended mainly for general-purpose and low-frequency work, designs requiring wide input swing, very low offset, high speed, rail-to-rail output, or low-noise performance should compare the exact datasheet limits against precision or modern amplifier families.

This page combines the LM324AWDT family identity, package information, qualification distinctions, drop-in ordering options, application guidance, and practical design considerations in a format designed to help engineers evaluate replacements without overlooking the electrical differences between ordering codes.

Аналоги без доработки для LM324AWDT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с LM324AWDT (тот же форм-фактор и посадочное место) — отличается по Amplifier Type, Package, Input Bias Current, Power Consumption.

STMicroelectronics
Amplifier Type: General Purpose
Package: SOIC-14
Input Bias Current: 20 nA typical
Сравнить с LM324AWDT →
STMicroelectronics
Amplifier Type: General-purpose operational amplifier
Package: 14-SO SOIC
Power Consumption: Low power consumption
Сравнить с LM324AWDT →

LM324WDT

✅ Прямая замена
STMicroelectronics
📦 SOIC-14
General-purpose operational amplifier · 4 channels · Push-pull · 3 V to 32 V · Quad operational amplifier · Low input bias current · Low power consumption · High gain

Уточнить цену

Открыть даташит →

LM324ADT

✅ Прямая замена
📦 SOIC-14
Same 14-pin SO family and 4-channel LM324 architecture; the A-versus-W ordering-code distinction is the documented difference, with no verified circuit-level parameter change available

📋 Справочный аналог (нет в каталоге)

LM324DT

✅ Прямая замена
STMicroelectronics
📦 SOIC-14
4 · 3 V to 32 V · ±1.5 V to ±16 V · 700 µA typical · 2 mV typical · 20 nA typical · 1.3 MHz typical · 0.4 V/µs typical

✗ Нет в наличии

$0.0827 / шт.

Открыть даташит →

LM324AWDT Максимальные параметры и электрические характеристики

Number of Amplifiers 4 channels
Amplifier Type 1 general-purpose operational amplifier
Напряжение питания ±15 V (30 V total span)
Power Consumption Low power
Input Bias Current Low input bias current
Frequency Compensation Internal
Корпус 14-pin SO package
Packaging Tape and reel
Тип монтажа Surface mount

Конфигурация выводов LM324AWDT

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Контакт 1 OUT1 — Amplifier 1 output
Контакт 2 IN1- — Amplifier 1 inverting input
Контакт 3 IN1+ — Amplifier 1 non-inverting input
Контакт 4 V+ — Positive supply voltage
Контакт 5 IN2+ — Amplifier 2 non-inverting input
Контакт 6 IN2- — Amplifier 2 inverting input
Контакт 7 OUT2 — Amplifier 2 output
Контакт 8 OUT3 — Amplifier 3 output
Контакт 9 IN3- — Amplifier 3 inverting input
Контакт 10 IN3+ — Amplifier 3 non-inverting input
Контакт 11 V- — Ground or negative supply connection
Контакт 12 IN4+ — Amplifier 4 non-inverting input
Контакт 13 IN4- — Amplifier 4 inverting input
Контакт 14 OUT4 — Amplifier 4 output

Типичное применение

LM324AWDT подходит для 6 применениеs: Industrial Sensor Signal Conditioning, Audio Preamplifier and Mixing Stage, Power Supply Feedback Control, Active RC Filtering, Communication Interface Buffering, Test and Measurement Front End.

🏭

Industrial Sensor Signal Conditioning

The LM324AWDT is appropriate for low-frequency sensor-conditioning stages because four independent amplifiers can buffer, scale, and subtract sensor signals within one 14-pin SO package. Its low-power operating characteristic and internally compensated voltage-feedback architecture simplify analog front ends built around resistive dividers and RC networks. A practical arrangement places one channel as a unity-gain input buffer, another as an inverting amplifier, and the remaining channels for gain and offset stages. The confirmed capability to operate at ±15 V supports split-supply instrumentation, but input common-mode range, output swing, offset, bias current, bandwidth, and slew rate must be checked against the sensor output and required measurement bandwidth.

🎧

Audio Preamplifier and Mixing Stage

The LM324AWDT can implement low-frequency audio preamplification, channel mixing, and active feedback stages where broad availability and low power consumption are more important than low-noise or high-bandwidth performance. Four amplifiers provide enough channels for a mono amplifier, stereo preamp, or small mixer without using four separate packages. Each channel should use negative feedback to establish its closed-loop gain, while the input and output networks must remain inside the confirmed input common-mode and output-swing limits. The 30 V total supply capability supports split-supply audio boards, but designers should verify slew rate and bandwidth for the highest audio frequency and avoid using this general-purpose amplifier where low-noise or rail-to-rail requirements dictate a more specialized part.

⚡

Power Supply Feedback Control

The LM324AWDT can form the error amplifier, voltage-feedback divider, and current-feedback elements in a basic regulated supply, provided the control-loop bandwidth and output requirements are compatible. Its four independent channels allow a single package to combine the main regulation amplifier with auxiliary limiting, soft-start, or monitoring functions. A practical design should compensate the loop for the selected output capacitor and load range, while keeping the amplifier input and output inside the usable signal limits. Because the LM324 is a general-purpose amplifier rather than a dedicated regulator controller, ripple, transient response, stability margins, and load-current capability require careful calculation. The confirmed ±15 V capability is useful for higher-voltage feedback networks, but absolute maximum and common-mode limits must be observed.

🔧

Active RC Filtering

The LM324AWDT is suitable for first-order and many second-order active filters built with passive R and C networks, including low-pass, high-pass, and band-pass stages. Internally compensated voltage-feedback operation reduces the number of components required for stable closed-loop gain, while four channels permit multistage filtering without multiple IC packages. Component tolerances directly determine cutoff accuracy, so use resistor networks with suitable matching and account for amplifier offset and bias-current errors when filtering very small signals. The confirmed ±15 V operating capability makes split-supply biasing straightforward for bipolar audio or instrumentation signals. Verify gain-bandwidth product and slew rate against the filter's upper frequency, and confirm that signals remain inside the amplifier's input common-mode and output-swing ranges.

🌐

Communication Interface Buffering

The LM324AWDT can buffer slow analog communication, level-conversion, and interface signals when the circuit operates within the amplifier's general-purpose electrical limits. Four channels can support bidirectional sensing, transmit-monitor amplification, offset adjustment, and receive amplification in a compact analog interface. The implementation should use the confirmed supply arrangement for the logic and signal levels, include protection where transients can exceed input limits, and avoid pushing outputs beyond the available swing. The low input bias current is useful when driving high-impedance sources, but source impedance, input capacitance, and bandwidth still determine actual settling behavior. Verify common-mode range at every logic threshold and compare the amplifier's response time with the interface data rate before relying on the part for high-speed digital buffering.

🖥️

Test and Measurement Front End

The LM324AWDT can support inexpensive test and measurement front ends that require several precision-enough general-purpose amplifiers for buffering, differential amplification, gain adjustment, and output driving. Its four-channel arrangement minimizes board space, while low input bias current helps when the source impedance is relatively high. For laboratory or production equipment, begin by checking the confirmed temperature grade, input offset voltage, input bias current, gain-bandwidth product, slew rate, and output-current capability against the measurement accuracy and bandwidth. Decouple the supply pins locally and use guarding or shielding around high-impedance inputs to reduce leakage and pickup. The device is most appropriate for low-to-moderate frequency measurements where a modern rail-to-rail precision amplifier is not required by the signal range.

What is the LM324AWDT?
The LM324AWDT is an STMicroelectronics low-power quad operational amplifier with four independent, internally compensated amplifiers in a 14-pin SO package. According to the STMicroelectronics LM324 family datasheet, the device is intended for general-purpose analog applications and can operate from a single supply or split supplies. The four-channel integration is useful when a board needs several amplifiers while keeping the footprint and external component count low.
How many operational amplifiers are in the LM324AWDT?
The LM324AWDT contains four independent operational amplifiers in one 14-pin SO package. The STMicroelectronics family description identifies the LM324 as a quad operational amplifier with internally implemented frequency compensation. Each channel can be used for a separate signal path, such as sensing, filtering, amplification, or feedback control, although every channel shares the package supply and ground connections.
What supply voltage can the LM324AWDT use?
The LM324AWDT supports operation from a single supply or split supplies, with a confirmed capability of ±15 V, or 30 V across the total supply span. The STMicroelectronics datasheet should be consulted for the minimum operating voltage, exact maximum ratings, input common-mode limits, and output-swing behavior. Those limits determine whether a particular rail combination can preserve useful signal range.
Is the LM324AWDT internally compensated?
Yes, the LM324AWDT uses internal frequency compensation in each amplifier channel. The STMicroelectronics family description specifically identifies internally implemented frequency compensation. This simplifies the common voltage-feedback configuration because designers normally do not add a compensation capacitor; external resistors and capacitors remain necessary for gain, filtering, feedback, and biasing functions.
Where can I download the LM324AWDT datasheet PDF?
The LM324AWDT datasheet PDF is available from the STMicroelectronics product documentation through the listed manufacturer datasheet link. The document contains the electrical characteristics, package information, pin description, application information, and ordering details needed to assess the device. Use the ordering-information table to confirm that the selected suffix matches the required temperature grade and tape-and-reel packaging.
What is the LM324AWDT pinout?
The LM324AWDT uses the standard 14-pin quad-op-amp arrangement: outputs are pins 1, 7, 8, and 14; inverting inputs are pins 2, 6, 9, and 13; non-inverting inputs are pins 3, 5, 10, and 12; the positive supply is pin 4; and ground is pin 11. The STMicroelectronics datasheet pin-description table is the controlling reference when assigning PCB tracks.
What can replace the LM324AWDT in a drop-in design?
The LM324DT, LM324ADT, and LM324WDT are same-package STMicroelectronics candidates for review because they use the 14-pin SO outline and belong to the LM324 quad-op-amp family. Their temperature, qualification, and ordering-code differences must be checked against the original system requirements. For every replacement, verify pinout, supply range, common-mode range, output swing, offset, bias current, bandwidth, and slew rate before production release.
Can LM324ADT replace LM324AWDT?
The LM324ADT can be considered as a board-level replacement candidate because it is listed in an ordering-code comparison for LM324AWDT and uses the same 14-pin SO family format. It should not be treated as an unconditional substitution until the temperature grade and qualification differences are confirmed. Also verify input bias current, input offset voltage, output swing, supply limits, and bandwidth against the circuit requirements.
When should I choose LM324AWDT instead of LM324DT?
Choose the LM324AWDT when the system specifically requires its qualification or temperature-grade arrangement and the LM324DT does not meet that requirement. Choose the LM324DT when its confirmed operating-temperature range and qualification status satisfy the application. The deciding issue is not the 14-pin footprint but whether electrical and environmental limits match the product's operating environment.
Is the LM324AWDT suitable for industrial control and instrumentation?
The LM324AWDT is suitable for many low-frequency control and instrumentation functions when its confirmed electrical and environmental limits match the design. The STMicroelectronics family provides four independent, low-power, internally compensated amplifiers that are well suited to feedback loops, signal conditioning, and filtering. Industrial suitability must be confirmed from the exact ordering-code ratings rather than inferred from the LM324 family name alone.
What is the difference between LM324AWDT and LM324WDT?
Both LM324AWDT and LM324WDT are STMicroelectronics LM324-family quad operational amplifiers associated with the 14-pin SO package. The primary ordering distinction is the A qualification or grade identifier; W identifies the tape-and-reel shipping format. For an exact interchange decision, compare the STMicroelectronics ordering table, temperature range, qualification status, and electrical limits rather than relying on the suffix alone.
Where can I buy LM324AWDT and check price and lead time?
Use the Request a Quote form on this page to request current LM324AWDT pricing, stock confirmation, and lead time for the tape-and-reel 14-pin SO configuration. The component is listed as a standard general-purpose four-circuit amplifier in a 14-SO package, and current commercial terms can change by quantity, packaging, and supply status. State the required order quantity and target delivery date with the request.
Is LM324AWDT in stock?
Current stock should be confirmed through the Request a Quote form on this page because availability can vary with order quantity and fulfillment timing. The part is offered in a tape-and-reel 14-pin SO package, which should be specified when requesting supply. Include your required quantity, date code preferences, and approved source conditions if your purchasing process requires them.
What is the price of LM324AWDT?
Current LM324AWDT pricing is available through the Request a Quote form on this page, where the required quantity can be entered before an offer is prepared. Pricing for a tape-and-reel, 14-pin SO operational amplifier can depend on order quantity, supply position, and delivery requirements. Request a quote rather than relying on a historical unit-price figure that may no longer represent the market.
What are the key LM324AWDT specifications engineers should know?
The key LM324AWDT specifications are four independent general-purpose amplifiers, internal frequency compensation, low-power operation, low input bias current, and a 14-pin SO package. The confirmed supply capability extends to ±15 V, or 30 V total. Other limits—including temperature range, offset voltage, common-mode range, gain-bandwidth product, slew rate, and output swing—should be taken directly from the STMicroelectronics datasheet for the exact ordering code.
What is the best Texas Instruments equivalent for LM324AWDT?
The best Texas Instruments equivalent must be selected from a documented, same-package LM324-family ordering code rather than from the generic family name alone. The replacement should use the same 14-pin SO footprint and provide compatible differential-input, output, supply, common-mode, and bias-current connections. Because the cross-reference material does not establish a specific pin-compatible Texas Instruments ordering code, use the manufacturer's cross-reference search and confirm the full electrical table before selecting it.

Справочные инженерные данные для LM324AWDT — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the LM324AWDT when a design needs four low-power, general-purpose voltage-feedback amplifiers in one 14-pin SO package and can operate within the exact common-mode, output-swing, bandwidth, and temperature limits. It is well suited to low-frequency instrumentation, active filters, feedback control, and general signal conditioning. Select LM324WDT when its confirmed grade is acceptable and the A ordering-code distinction of the target is unnecessary; select LM324ADT or LM324DT after reviewing their respective qualification and temperature details. For designs requiring rail-to-rail input or output, very low offset, low noise, high speed, or guaranteed output-current capability, use a modern precision or rail-to-rail amplifier instead. Validate any substitute with the same power-supply, load, source-resistance, and environmental conditions used in production.

Сравнение с аналогами

Параметр Этот товар LM324WDT LM324ADT LM324DT
Package SOIC-14 SOIC-14 SOIC-14 SOIC-14
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Number of Amplifiers 4 channels 4 channels 4 channels 4 channels
Amplifier Class Low-power general-purpose operational amplifier Low-power general-purpose operational amplifier Low-power general-purpose operational amplifier Low-power general-purpose operational amplifier
Compensation Internal frequency compensation Internal frequency compensation Internal frequency compensation Internal frequency compensation
Mounting Type Surface mount Surface mount Surface mount Surface mount
Shipping Format Tape and reel Tape and reel Tube or tray ordering dependent Tube or tray ordering dependent

Ключевые отличия

  • Four-channel integration in one 14-pin package (против LM2902KNS)
  • Internal frequency compensation (против LM324WDT)
  • Single-package implementation for four analog channels (против LM2902KNS)

Заметки по проектированию

Place the supply bypass capacitor as close as practical to pins 4 and 11, and keep the high-current return path short to reduce supply noise and ground bounce. Route each input connection away from output and switching-node traces. Because the LM324 contains four amplifiers in one package, shared supply impedance can couple noise between channels; separate local bypass paths and solid ground-plane connectivity help preserve channel-to-channel isolation.

Do not assume the full supply rail is available at the output. Check the output-swing limits at the required load current and ensure both inputs remain inside the common-mode range throughout signal excursions. A ±15 V supply does not automatically provide ±15 V signal swing, and an input signal above the common-mode limit can produce distortion or unexpected output behavior even though the absolute maximum supply rating is satisfied.

Use negative feedback to establish the required closed-loop gain and confirm that the selected gain does not exceed the amplifier's bandwidth and stability behavior at the operating frequency. Avoid capacitively loading the output with long cable runs or slow input nodes without checking for oscillation. For high-impedance sources, minimize board leakage and contamination around the input pins because bias current and leakage errors can dominate the measurement.

Estimated: with a 30 V total supply span and a 15 V output at 10 mA load, the ideal linear-stage dissipation is (30 V - 15 V) × 0.01 A = 0.15 W. Actual device dissipation also depends on quiescent current and output stage behavior. This estimate indicates that a small SO package can be adequate in moderate-load applications, but the exact maximum ratings, quiescent current, output current, and thermal characteristics must be verified for the final operating condition.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The A ordering-code comparison references RoHS and REACH information, but no explicit compliance result was available for extraction. Confirm the exact declarations in the STMicroelectronics product documentation and material declaration.

Данные проверены: 2026-11-17 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

LM324AWDT datasheet LM324AWDT pinout LM324AWDT specifications LM324AWDT datasheet pdf STMicroelectronics LM324AWDT LM324AWDT 14-SO package LM324AWDT equivalent LM324AWDT replacement LM324AWDT price LM324AWDT stock LM324AWDT vs LM324ADT LM324AWDT application circuit

Связанные компоненты & термины

STMicroelectronics LM324AWDT LM324WDT LM324ADT LM324DT LM2902KNS quad operational amplifier operational amplifier analog amplifier signal-conditioning IC semiconductor low-dropout low input bias current internal frequency compensation voltage-feedback amplifier single-supply operation split-supply operation common-mode voltage output swing voltage gain-bandwidth product slew rate SOIC-14 SOIC family surface mount industrial instrumentation
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ