Texas Instruments

MAX3221IDBRE4 - 250kbps RS-232 Transceiver | Texas Instruments

Артикул: MAX3221IDBRE4 ✓ Активен
3 V to 5.5 V Vdss 1 µA typical Id TIA/EIA-232-F and ITU V.28 Rds(on) 16-pin SSOP Package
MOQ: 1 |

MAX3221IDBRE4 Обзор

Texas Instruments MAX3221IDBRE4 is a single-channel RS-232 line driver and receiver operating from a 3 V to 5.5 V supply at speeds up to 250 kbps, with ±15 kV ESD protection and a 16-pin SSOP package. It provides one driver, one receiver, a dual charge-pump circuit, a dedicated receiver enable input, and 5 V-compatible logic inputs when operated from 3.3 V.

An RS-232 transceiver is an interface IC that converts between single-ended logic signals and the bipolar voltage levels used by RS-232 equipment. The MAX3221 belongs to the line-driver and receiver hierarchy within interface ICs, where it sits between a host controller and an external serial connector. Its charge-pump circuitry generates the positive and negative voltages required by the RS-232 transmitter without a separate negative supply.

Key features include operation from 3 V to 5.5 V, a maximum data rate of 250 kbps, and ±15 kV human-body-model ESD protection on the serial-port connection pins, including ground. The receiver supports a dedicated enable input, while the device maintains a typical 1 µA standby current. Four external 0.1 µF charge-pump capacitors support the internal voltage conversion, and 5 V logic inputs are accepted with a 3.3 V supply.

The MAX3221 implements one half-duplex RS-232 channel, combining a transmitter and receiver in a compact package. Its internal dual charge pump produces the bipolar signal levels required by TIA/EIA-232-F and ITU V.28 interfaces. The target MAX3221IDBRE4 ordering code identifies the 16-pin SSOP configuration, allowing placement with surface-mount assembly while preserving a conventional narrow-body footprint.

Typical uses include single-port serial diagnostics, point-of-sale equipment, industrial control links, embedded service interfaces, and legacy peripheral connections. The 250 kbps capability supports low- and moderate-speed serial links, while the dual supply range permits operation from both 3.3 V and 5 V systems. The low standby current is useful when equipment must retain a receive path without continuously loading the supply.

Circuit design should preserve the charge-pump capacitor connections, place the four 0.1 µF capacitors close to their associated pins, and route the RS-232 connector and protected serial lines away from sensitive analog and high-speed digital traces. Confirm logic thresholds, signal polarity, flow control, and connector grounding before replacing an existing interface design.

This product overview combines the manufacturer's electrical characteristics, package information, interface standards, ESD capability, and practical implementation guidance with engineering-focused comparisons for drop-in device selection.

Аналоги без доработки для MAX3221IDBRE4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MAX3221IDBRE4 (тот же форм-фактор и посадочное место) — отличается по External Charge-Pump Capacitors, Package, Product Type, Supply Voltage Range, ESD Protection.

Texas Instruments
External Charge-Pump Capacitors: 4
Package: 16-SSOP (0.209 inch, 5.30mm width)
Product Type: RS-232 line driver and receiver transceiver
Сравнить с MAX3221IDBRE4 →
Texas Instruments
ESD Protection: ±15 kV HBM on serial-port connection pins, including GND
Сравнить с MAX3221IDBRE4 →

MAX3221IDBR

✅ Прямая замена
Texas Instruments
📦 16-pin SSOP
Single-channel RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbps · 1 · 1 · ±15 kV HBM on serial-port connection pins, including GND · 1 µA · 4 × 0.1 µF

Уточнить цену

Открыть даташит →

MAX3221EIDB

✅ Прямая замена
Texas Instruments
📦 16-pin SSOP
RS-232 line driver and receiver transceiver · 1 · 1 · 250kbps · 3V to 5.5V · TIA/EIA-232-F · IEC 61000-4-2 · ±15kV

Уточнить цену

Открыть даташит →

MAX3221IDBRE4 Характеристики

Product Type Single-channel RS-232 line driver and receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Number of Drivers 1
Number of Receivers 1
Driver and Receiver Configuration 1/1 full RS-232 transceiver
ESD Protection ±15 kV HBM
Standby Current 1 µA typical
External Charge-Pump Capacitors 4 × 0.1 µF
5 V Logic Input Compatibility 5 V logic input accepted with 3.3 V supply
RS-232 Standards TIA/EIA-232-F and ITU V.28
Корпус 16-pin SSOP
Package Width 5.30 mm
Тип монтажа Surface mount
Receiver Enable Dedicated enable input

Руководство по цоколевке MAX3221IDBRE4 в корпусе 5.30 mm

Цоколевка для MAX3221IDBRE4 (корпус 5.30 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 5.30 mm для MAX3221IDBRE4

Нет подробных данных о распиновке для MAX3221IDBRE4.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MAX3221IDBRE4 подходит для 6 применениеs: Industrial Diagnostic Serial Port, Point-of-Sale Terminal Connectivity, Embedded Equipment Service Console, Legacy Peripheral Data Link, IoT Gateway Maintenance Port, Instrument Control Connection.

🏭

Industrial Diagnostic Serial Port

The MAX3221IDBRE4 suits a single industrial diagnostic connection because it combines one RS-232 driver, one receiver, and a 250 kbps maximum data rate in a 16-pin SSOP package. Operating from 3 V to 5.5 V permits integration with embedded 3.3 V controllers and legacy 5 V service equipment. Its ±15 kV HBM ESD protection on the connector-facing pins adds useful defense for a cable-connected port, although industrial surge requirements should be assessed separately. The receiver enable input allows the host to control when received data is presented, while four 0.1 µF charge-pump capacitors support the internal bipolar voltage generation.

🔧

Point-of-Sale Terminal Connectivity

The MAX3221IDBRE4 provides a compact interface between a point-of-sale controller and a legacy RS-232 peripheral. Its single-channel architecture is appropriate when the terminal manages one serial device, while the 250 kbps rate covers common receipt-printer and service-port traffic. The 3 V to 5.5 V operating range supports both modern 3.3 V logic systems and 5 V equipment interfaces, and the receiver accepts 5 V logic input with a 3.3 V supply. The 16-pin SSOP package helps limit board area, while the dedicated receiver enable can suppress an unwanted receiver output during reset or firmware update periods.

💻

Embedded Equipment Service Console

The MAX3221IDBRE4 can provide a service-console link between an embedded controller and a laptop or configuration tool. Its 250 kbps maximum rate is suitable for command exchanges, boot logs, firmware downloads, and diagnostic commands rather than continuous high-throughput data. The device accepts a supply from 3 V to 5.5 V and uses a typical 1 µA standby current, making it useful in equipment that periodically powers or disables its service interface. Connector-side ±15 kV HBM ESD protection helps manage electrostatic discharge encountered during routine cable handling, but cable routing and grounding remain essential.

🔌

Legacy Peripheral Data Link

The MAX3221IDBRE4 bridges modern controller logic to a legacy RS-232 peripheral when only one unidirectional or half-duplex channel is required. It converts the controller's logic levels into RS-232-compatible signals and provides a receiver for incoming data, with operation supported through 250 kbps. Its 16-pin SSOP package is useful where a through-hole transceiver would consume excessive board area. The three-to-four external 0.1 µF capacitors should be positioned close to the charge-pump pins, and the serial route should remain separated from clocks, sensor analog signals, and switching-power nodes.

🧩

IoT Gateway Maintenance Port

The MAX3221IDBRE4 can serve as the maintenance and configuration interface for an IoT gateway, smart controller, or network appliance that supports RS-232 service access. The 3 V to 5.5 V supply range fits widely used embedded processing rails, and 250 kbps is sufficient for startup logs, configuration transfer, and remote diagnostics. The receiver enable supports controlled connection behavior, and the low typical standby current of 1 µA helps when the gateway periodically isolates its maintenance interface. For outdoor or remotely deployed equipment, add environmental isolation and surge protection as required by the installation.

📟

Instrument Control Connection

The MAX3221IDBRE4 is suitable for controlling or reading a single legacy serial instrument from an embedded test system. The 250 kbps limit supports typical command-response instrument protocols, and the 16-pin SSOP package simplifies integration into compact controller boards. A 3.3 V or 5 V host can operate the interface within the stated 3 V to 5.5 V supply range, including systems that need 5 V-compatible logic inputs. The connector-facing ±15 kV HBM protection improves robustness, although long instrument cables may require additional protection. The four charge-pump capacitors must follow the manufacturer's layout and component guidance.

What is the operating voltage of MAX3221IDBRE4?
The MAX3221IDBRE4 operates from a 3 V to 5.5 V VCC supply. According to the Texas Instruments MAX3221 product information, this range supports 3.3 V and 5 V systems, and the receiver can also accept 5 V logic input when the device is powered from 3.3 V. Confirm the input and output thresholds for the specific system voltage before finalizing the logic interface.
What is the maximum data rate of MAX3221IDBRE4?
The MAX3221IDBRE4 supports serial data rates up to 250 kbps. The Texas Instruments MAX3221 product page identifies the device as a single-channel RS-232 line driver and receiver operating up to 250 kbps. This rate is appropriate for legacy serial ports, diagnostic connections, embedded control links, and other low- to moderate-speed point-to-point RS-232 communications.
Where can I download the MAX3221IDBRE4 datasheet PDF?
The official MAX3221IDBRE4 datasheet is available through the Texas Instruments MAX3221 product page at https://www.ti.com/product/MAX3221. The page provides the manufacturer datasheet, ordering information, electrical characteristics, pin description, and application information. Use the ordering-information table to confirm that MAX3221IDBRE4 corresponds to the required 16-pin SSOP configuration.
Where can I find the MAX3221IDBRE4 pinout?
The MAX3221IDBRE4 pin assignments are shown in the pin-description and pin-configuration sections of the Texas Instruments MAX3221 datasheet. The device uses a 16-pin SSOP package and includes one receiver output, one receiver enable input, one driver input, one driver output, supply connections, ground, and charge-pump capacitor connections. Follow the numbered package drawing when assigning PCB tracks.
What are the key specifications of MAX3221IDBRE4 that engineers should know?
The MAX3221IDBRE4 combines one RS-232 driver, one receiver, and a dual charge pump in a 16-pin SSOP package. Its principal ratings are a 3 V to 5.5 V supply, operation up to 250 kbps, ±15 kV HBM ESD protection, 1 µA typical standby current, and four external 0.1 µF capacitors. The device also meets TIA/EIA-232-F and ITU V.28 interface requirements.
Does MAX3221IDBRE4 include ESD protection?
Yes, the MAX3221IDBRE4 provides ±15 kV human-body-model ESD protection on the RS-232 serial-port connection pins, including ground. According to the Texas Instruments MAX3221 datasheet information, this protection is intended for the connector-facing pins rather than every logic-side pin. External surge and cable protection may still be appropriate for severe industrial environments.
What can replace MAX3221IDBRE4?
The MAX3221IDBR is the closest same-family, 16-pin SSOP replacement for MAX3221IDBRE4, while the MAX3221EIDB offers another Texas Instruments ordering option associated with the same family. Direct substitution still requires checking the complete pin description, temperature suffix, package dimensions, supply range, and transceiver enable behavior. The MAX3221CAE and ICL3221CAZ-T use different package constructions and are not drop-in choices.
Is MAX3221IDBRE4 the same as MAX3221IDBR?
The MAX3221IDBR is a closely related ordering version of the MAX3221IDBRE4 and uses the same 16-pin SSOP device family. The E4 and R ordering codes can carry different qualification, temperature, or reel-packaging information, so engineers should compare the ordering table before treating the parts as interchangeable. Confirm the exact suffix, package, temperature grade, and tape-and-reel orientation.
Is MAX3221IDBRE4 suitable for a 3.3 V industrial system?
The MAX3221IDBRE4 is suitable for a 3.3 V system because its specified VCC range is 3 V to 5.5 V. It also accepts 5 V logic input with a 3.3 V supply. For an industrial installation, verify the required operating-temperature grade, isolation strategy, cable protection, grounding arrangement, and regulatory environment; the device's core electrical specifications alone do not establish complete system compliance.
MAX3221IDBRE4 vs MAX3221EIDB: which is better for a new design?
Choose the MAX3221IDBRE4 when its specified ordering conditions match the production requirements and the design needs the identified 16-pin SSOP configuration. Consider the MAX3221EIDB when its ordering information provides a more suitable temperature, qualification, or packaging option for the same MAX3221 interface family. Compare both against the manufacturer ordering table rather than inferring equivalence solely from the similar MPNs.
When should I choose MAX3221IDBRE4 over a multi-channel RS-232 transceiver?
Choose the MAX3221IDBRE4 when the system requires only one RS-232 channel and needs a compact 16-pin SSOP implementation. Its one-driver, one-receiver arrangement is appropriate for point-to-point links that do not require multiple ports, automatic shutdown, or software-selectable channel routing. A multi-channel device is preferable when several RS-232 ports must share one host interface.
How many external capacitors does MAX3221IDBRE4 require?
The MAX3221IDBRE4 requires four external charge-pump capacitors, each rated at 0.1 µF. According to the Texas Instruments MAX3221 datasheet information, these capacitors support the internal dual charge-pump circuit that develops the bipolar voltages required for RS-232 transmission. Place each capacitor close to its designated IC pin and follow the recommended layout in the datasheet.
How much standby current does MAX3221IDBRE4 use?
The MAX3221IDBRE4 has a typical standby current of 1 µA. According to the Texas Instruments MAX3221 family information, this low standby level is useful when the interface must remain connected or partially enabled while the surrounding system is in a reduced-power state. Actual system consumption also depends on the selected operating state, external load, and supply arrangement.
Where to buy MAX3221IDBRE4 online?
Use the Request a Quote form on this page to request current availability, lead time, and commercial terms for the MAX3221IDBRE4. The request should include the exact 16-pin SSOP ordering code and the required quantity. Manufacturing and packaging requirements should be confirmed with the supplier before ordering because suffix codes can affect qualification and reel configuration.
What is the price and lead time for MAX3221IDBRE4?
Current price, stock, and lead time for the MAX3221IDBRE4 should be obtained through the Request a Quote form on this page. The request should state the required quantity, package orientation, target delivery date, and whether any automotive or industrial qualification is required. Submitting the exact MPN helps prevent confusion with related MAX3221 ordering codes.
What cross-brand equivalent is available for MAX3221IDBRE4?
The ICL3221EIAZ appears in a MAX3221IDBRE4 cross-reference comparison and is associated with a 16-pin SSOP-style RS-232 interface family. However, a cross-brand substitution must be confirmed for exact pin assignments, electrical thresholds, receiver-enable behavior, ESD qualification, and package dimensions before installation. The ICL3221CAZ-T comparison does not establish a drop-in match because its package construction differs.

Справочные инженерные данные для MAX3221IDBRE4 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MAX3221IDBRE4 for a compact, single-channel RS-232 interface operating at up to 250 kbps from a 3 V to 5.5 V supply. Its 16-pin SSOP package, dedicated receiver enable, 1 µA typical standby current, and ±15 kV HBM connector-side protection suit service ports, industrial diagnostics, and legacy peripheral links. MAX3221IDBR is the closest same-family option when its ordering suffix provides the required qualification, temperature, and reel configuration. Consider MAX3221EIDB when its ordering details better fit the production environment, but verify its electrical and temperature entries against the exact requirement. Do not substitute MAX3221CAE or ICL3221CAZ-T solely by function because their package constructions differ. For multi-port systems, choose a multi-channel transceiver instead; for environments with severe lightning or industrial surge exposure, add external protection rather than relying solely on the IC's HBM rating.

Сравнение с аналогами

Параметр Этот товар MAX3221IDBR MAX3221EIDB
Brand Texas Instruments Texas Instruments Texas Instruments
Package 16-pin SSOP 16-pin SSOP - same 16-pin SSOP - same
Device Type Single-channel RS-232 transceiver Single-channel RS-232 transceiver MAX3221-family RS-232 transceiver

Ключевые отличия

  • Combines a complete single-channel interface in a narrow SSOP package (против MAX3221IDBR)
  • Uses a low-power 1 µA typical standby state (против MAX3221EIDB)
  • Provides connector-side HBM ESD protection (против MAX3221EIDB)

Заметки по проектированию

Place the four 0.1 µF charge-pump capacitors directly beside their corresponding IC pins and maintain short, symmetric return paths. Follow the capacitor connections and polarity shown in the manufacturer datasheet. Keep the exposed connector-side traces away from clocks, precision analog inputs, and switching-regulator power loops to reduce capacitive coupling and ground-current injection into sensitive circuitry.

Route the RS-232 driver output directly toward the connector and keep the receiver input away from switching nodes and high-current return paths. Ground the connector shield according to the equipment's EMC strategy, and use the MAX3221 ground pin as the device reference. Do not route the cable-side interface through areas carrying unrelated high-speed signals, since both edge coupling and ground bounce can corrupt the receiver threshold.

Confirm that the replacement ordering code preserves the 16-pin SSOP footprint, receiver-enable behavior, temperature grade, and tape-and-reel orientation. Related MAX3221 and ICL3221 family numbers may differ in pin assignment, package construction, or qualification even when their headlines appear similar. Also verify that the host accepts the receiver output when disabled and that logic thresholds remain valid at the selected 3.3 V or 5 V supply.

For equipment with an externally accessible RS-232 connector, treat the MAX3221's ±15 kV HBM rating as device-level ESD protection rather than a complete industrial surge solution. Add appropriately rated external protection when the port can experience lightning, large motor transients, or severe conducted disturbances. Bond the connector shield and enclosure reference in accordance with the product's grounding architecture to prevent cable-borne energy from entering the logic ground.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The device meets TIA/EIA-232-F and ITU V.28 interface requirements. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product or quality documentation.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX3221IDBRE4 datasheet MAX3221IDBRE4 pinout MAX3221IDBRE4 datasheet pdf MAX3221IDBRE4 equivalent MAX3221IDBRE4 replacement MAX3221IDBRE4 cross reference MAX3221IDBRE4 price MAX3221IDBRE4 stock Texas Instruments MAX3221IDBRE4 MAX3221IDBRE4 250kbps RS-232 MAX3221IDBRE4 16-SSOP MAX3221IDBRE4 vs MAX3221IDBR MAX3221IDBRE4 vs MAX3221EIDB MAX3221IDBRE4 application circuit

Связанные компоненты & термины

Texas Instruments MAX3221IDBRE4 MAX3221IDBR MAX3221EIDB ICL3221EIAZ RS-232 transceiver RS-232 line driver RS-232 line receiver interface IC semiconductor TIA/EIA-232-F ITU V.28 dual charge pump ESD protection HBM receiver enable 16-pin SSOP SSOP family surface-mount package 250 kbps 3 V to 5.5 V charge-pump capacitor industrial diagnostics service console
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ