MC9S08DZ60AMLF - 8-bit S08 MCU 40MHz 60KB Flash CAN | NXP
Артикул: MC9S08DZ60AMLF ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
MC9S08DZ60AMLF Обзор
A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and programmable peripherals into one chip, forming the heart of embedded systems. Within the power management hierarchy of embedded design, 8-bit MCUs like the S08 family occupy the cost- and power-sensitive tier below 16-bit and 32-bit devices, serving control loops, communication gateways, and sensor interfaces.
Key differentiating features include the embedded MSCAN module supporting CAN 2.0 A/B protocols for automotive and industrial networks, a LIN master-capable SCI, 2.5 us 12-bit ADC conversions for fast analog sampling, and on-chip background debug (BGND instruction) that eliminates the need for external emulation hardware. The device supports up to 32 interrupt/reset sources and operates from 3.3V or 5V supplies.
The enhanced HCS08 core executes the HC08 instruction set with the added BGND instruction, achieving 20 MHz bus operation. Internal clock sources reduce external component count, while the flash/EEPROM combination allows parameter storage without a separate memory device. According to the NXP MC9S08DZ60 datasheet, oscillator design guidance recommends roughly 10 pF as an estimate of combined pin and PCB capacitance on EXTAL/XTAL.
Typical applications include automotive body electronics, industrial CAN nodes, HVAC control, motor control, and appliance systems where fieldbus connectivity and analog integration matter. Note this specific part is NRND (Not Recommended for New Designs) per NXP; the S08D family offers pin, peripheral, and tool compatibility for migration within the family.
When designing in, budget CAN transceiver loading on the TX/RX pins and use 1% reference filtering for the 12-bit ADC. Migration to the automotive-qualified S9S08DZ60 variants preserves the same flash and RAM sizing.
This page synthesizes distributor pricing context, drop-in family alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.
Аналоги без доработки для MC9S08DZ60AMLF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9S08DZ60AMLF (тот же форм-фактор и посадочное место) — отличается по Core Processor, Program Memory Size, RAM Size, RoHS Status, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC9S08DZ60ACLF
✅ Прямая замена✓ В наличии
$6.85 / шт.
Открыть даташит →MC9S08DZ48AMLF
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MC9S08DZ32AMLF
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$2.75 / шт.
Открыть даташит →MC9S08DV60AMLF
✅ Прямая замена✓ В наличии
$4.6 / шт.
Открыть даташит →S9S08DZ60F2MLF
✅ Прямая замена✓ В наличии
$2.85 / шт.
Открыть даташит →S9S08DZ48F1MLC
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC9S08DZ60AMLF Максимальные параметры и электрические характеристики
| Core Processor | S08 (HCS08), 8-bit CISC |
| Core Size | 8-Bit |
| Maximum CPU Frequency | 40 MHz (20 MHz bus) |
| Program Memory Size | 60 KB (60K x 8) Flash |
| RAM Size | 4 KB |
| Data EEPROM | Embedded EEPROM |
| Connectivity | CAN 2.0 A/B (MSCAN), LIN master-capable SCI, SPI, SCI |
| ADC Resolution | 12-bit |
| ADC Channels | 24-channel (16-channel 12-bit ADC per FindIC overview) |
| ADC Conversion Time | 2.5 us |
| Analog Comparators | 1 |
| Напряжение питания | 3.3 V / 5 V |
| Interrupt/Reset Sources | Up to 32 |
| Debug | On-chip background debug (BGND instruction) |
| Корпус | 48-LQFP (7x7 mm) |
| Тип монтажа | Surface Mount |
| Packaging | Tray |
| Статус RoHS | RoHS compliant (per distributor listing) |
| Статус жизненного цикла | NRND (Not Recommended for New Designs) per NXP |
Конфигурация выводов MC9S08DZ60AMLF
| Контакт 1 | PTB7 — General-purpose I/O / ADC channel |
| Контакт 2 | PTB6 — General-purpose I/O / ADC channel |
| Контакт 3 | PTB5 — General-purpose I/O / ADC channel |
| Контакт 4 | PTB4 — General-purpose I/O / ADC channel |
| Контакт 5 | PTB3 — General-purpose I/O / ADC channel |
| Контакт 6 | PTB2 — General-purpose I/O / ADC channel |
| Контакт 7 | PTB1 — General-purpose I/O / ADC channel |
| Контакт 8 | PTB0 — General-purpose I/O / ADC channel |
| Контакт 9 | VSS — Digital ground |
| Контакт 10 | VDD — Power supply |
| Контакт 11 | VREFH — ADC high reference voltage |
| Контакт 12 | VREFL — ADC low reference voltage |
| Контакт 13 | PTC0 — General-purpose I/O / peripheral function |
| Контакт 14 | PTC1 — General-purpose I/O / peripheral function |
| Контакт 15 | PTC2 — General-purpose I/O / peripheral function |
| Контакт 16 | PTC3 — General-purpose I/O / peripheral function |
| Контакт 17 | PTC4 — General-purpose I/O / peripheral function |
| Контакт 18 | PTC5 — General-purpose I/O / peripheral function |
| Контакт 19 | PTC6 — General-purpose I/O / peripheral function |
| Контакт 20 | PTC7 — General-purpose I/O / peripheral function |
| Контакт 21 | PTD0 — General-purpose I/O / peripheral function |
| Контакт 22 | PTD1 — General-purpose I/O / peripheral function |
| Контакт 23 | PTD2 — General-purpose I/O / peripheral function |
| Контакт 24 | PTD3 — General-purpose I/O / peripheral function |
| Контакт 25 | PTD4 — General-purpose I/O / peripheral function |
| Контакт 26 | PTD5 — General-purpose I/O / peripheral function |
| Контакт 27 | PTD6 — General-purpose I/O / peripheral function |
| Контакт 28 | PTD7 — General-purpose I/O / peripheral function |
| Контакт 29 | VSSAR — Analog ground |
| Контакт 30 | VDDAR — Analog power supply |
| Контакт 31 | PTE0 — General-purpose I/O / peripheral function |
| Контакт 32 | PTE1 — General-purpose I/O / peripheral function |
| Контакт 33 | PTE2 — General-purpose I/O / peripheral function |
| Контакт 34 | PTE3 — General-purpose I/O / peripheral function |
| Контакт 35 | PTE4 — General-purpose I/O / peripheral function |
| Контакт 36 | PTE5 — General-purpose I/O / peripheral function |
| Контакт 37 | PTE6 — General-purpose I/O / peripheral function |
| Контакт 38 | PTE7 — General-purpose I/O / peripheral function |
| Контакт 39 | EXTAL — Oscillator input / external clock |
| Контакт 40 | XTAL — Oscillator output |
| Контакт 41 | PTF0 — General-purpose I/O / peripheral function |
| Контакт 42 | PTF1 — General-purpose I/O / peripheral function |
| Контакт 43 | PTF2 — General-purpose I/O / peripheral function |
| Контакт 44 | PTF3 — General-purpose I/O / peripheral function |
| Контакт 45 | PTF4 — General-purpose I/O / peripheral function |
| Контакт 46 | BKGD/MS — Background debug / mode select |
| Контакт 47 | RESET — Active-low external reset |
| Контакт 48 | PTG0 — General-purpose I/O / peripheral function |
Типичное применение
MC9S08DZ60AMLF подходит для 6 применениеs: Automotive Body Control Modules, Industrial CAN Network Nodes, HVAC and Climate Control Systems, Motor Control (DC and Small BLDC), Home Appliance Control, Sensor and Gatekeeper Nodes with LIN/CAN Bridging.
Automotive Body Control Modules
The MC9S08DZ60AMLF was purpose-built for automotive body electronics, combining an embedded CAN 2.0 A/B controller with a 40 MHz HCS08 core and 60 KB flash in a compact 48-LQFP. Body control nodes - lighting, door modules, seat control - need reliable in-vehicle networking plus multiple PWM and ADC channels; the 24-channel 12-bit ADC with 2.5 us conversions handles switch and sensor monitoring while the MSCAN handles the bus. The embedded EEPROM stores calibration and fault data across power cycles without an external memory IC. In this role the MCU typically interfaces a 5V CAN transceiver on PTC/PTD pins, with the 3.3V/5V supply flexibility matching automotive rail conditions. For new automotive programs, migrate to the automotive-qualified S9S08DZ60 variants which preserve the feature set.
Рекомендуется
Industrial CAN Network Nodes
In factory automation and industrial control, the MC9S08DZ60AMLF serves as a low-cost CAN 2.0 node MCU: its 40 MHz (20 MHz bus) HCS08 core comfortably services MSCAN message buffers while the 24-channel 12-bit ADC digitizes analog sensor inputs at 2.5 us per conversion. The 60 KB flash accommodates protocol stacks and application firmware, and 4 KB RAM handles CAN buffering plus application state. Embedded EEPROM stores node configuration, device IDs, and diagnostic counters without external serial memory. Typical topology places the MCU between a 5V CAN transceiver and local actuator/sensor drivers, with SPI used for additional peripherals. Since this exact part is NRND, industrial new builds should use S9S08DZ60 or MC9S08DZ60ACLF-grade equivalents in the same footprint.
Рекомендуется
HVAC and Climate Control Systems
The MC9S08DZ60AMLF fits HVAC controllers that need network reporting (CAN or LIN via SCI), dense analog input (thermistors, pressure sensors, humidity), and parameter retention. Its 24-channel 12-bit ADC digitizes multiple NTC channels, while embedded EEPROM holds setpoints, schedules, and service data through brownouts and power loss - eliminating a separate serial EEPROM and its I2C overhead. The 3.3V/5V supply flexibility and rich port complement (PTB through PTG) drive relays, blowers, and display interfaces directly. The 40 MHz core executes PID loops for temperature control with margin, and on-chip background debug simplifies field firmware updates via BDM. In these systems the MCU typically sits behind a power supervisor, driving TRIAC or relay stages through port pins with RC-filtered ADC front ends for noise immunity.
Рекомендуется
Motor Control (DC and Small BLDC)
The MC9S08DZ60AMLF supports DC and small BLDC motor control using its PWM-capable port timers and fast 12-bit ADC for current and position feedback. The 2.5 us ADC conversion enables per-PWM-cycle current sampling in low-side shunt topologies, and the 40 MHz core closes current loops for brushed DC and trapezoidal (six-step) BLDC drives. The embedded CAN interface lets the motor node report status and receive commands on industrial or vehicle buses without a second controller. Internal clock sources plus the BGND debug capability shorten development cycles. Note the S08 lacks dedicated motor-control peripherals like quadrature-decoder hardware of larger families, so encoder interfaces are handled in software - suitable for fan, pump, and actuator drives rather than high-dynamic servo systems where a DSC such as MC56F8357 is preferred.
Рекомендуется
Home Appliance Control
Appliance main boards - washing machines, dishwashers, refrigerators - benefit from the MC9S08DZ60AMLF's integration: CAN or LIN (SCI) links to display and sensor boards, 24-channel 12-bit ADC for temperature, water-level, and current sensing, and embedded EEPROM for cycle counters and fault logs that survive power cycling. The 60 KB flash stores multi-language UI logic and multiple wash/cool programs, while 5V operation matches legacy appliance power supplies. The 48-LQFP 7x7 mm footprint suits compact control boards, and RoHS compliance simplifies global certification. Because appliance programs run for a decade or more, designers starting new boards should select the S9S08DZ60 production variants, keeping the identical peripheral map and footprint so firmware and layout carry over with minimal change.
Рекомендуется
Sensor and Gatekeeper Nodes with LIN/CAN Bridging
Distributed systems such as agricultural equipment, commercial vehicles, and building automation use the MC9S08DZ60AMLF as a bridging node between a CAN backbone and LIN (SCI-based) sub-nets or analog sensor clusters. The MSCAN module manages backbone traffic while a second SCI runs LIN master protocols; the 40 MHz core provides headroom for both stacks plus application logic. The 12-bit ADC samples local sensors, and embedded EEPROM stores node addressing and calibration. Power consumption and 8-bit cost efficiency make it attractive across dozens of nodes per system. On-chip background debug enables in-system reprogramming during manufacturing and service. Designs of this type today should be based on the S9S08DZ60F2 automotive-qualified successor to guarantee long-term supply.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9S08DZ60AMLF — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC9S08DZ60ACLF | MC9S08DZ48AMLF | MC9S08DZ32AMLF | MC9S08DV60AMLF | S9S08DZ60F2MLF | S9S08DZ48F1MLC |
|---|---|---|---|---|---|---|---|
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP - same family footprint |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Frequency | S08 (HCS08), 40 MHz | S08, 40 MHz | S08, 40 MHz | S08, 40 MHz | S08, 40 MHz | S08, 40 MHz | S08, 40 MHz |
| Flash | 60 KB | 60 KB | 48 KB | 32 KB | 60 KB | 60 KB | 48 KB |
| Embedded CAN | Yes (CAN 2.0 A/B) | Yes | Yes | Yes | No | Yes | Yes |
| Embedded EEPROM | Yes | Yes | Yes | Yes | No | Yes | Yes |
Ключевые отличия
- Embedded CAN + EEPROM on an 8-bit MCU (против MC9S08DV60AMLF)
- Largest flash in the S08DZ 48-LQFP subfamily (против MC9S08DZ48AMLF)
- Automotive-qualified successor available in same footprint (против S9S08DZ60F2MLF)
Заметки по проектированию
Decouple every VDD/VSS pair with a 0.1 uF ceramic capacitor placed within 2 mm of the pins, plus one bulk 4.7-10 uF per board section. Keep the analog supply (VDDAR/VSSAR) and ADC references (VREFH/VREFL) on a quiet island: star-route them to the main regulator through an RC or ferrite filter. Route CAN TX/RX away from the oscillator loop; keep EXTAL/XTAL traces short and guard them with ground, using the datasheet guidance of ~10 pF combined pin+PCB capacitance when selecting crystal load capacitors.
The MC9S08DZ60AMLF is NRND - do not start new production designs on this exact orderable part; select MC9S08DZ60ACLF or automotive S9S08DZ60 variants to secure supply. Second, the BKGD/MS pin is the debug and mode-select pin: if your application drives it externally at reset, the device may enter background debug mode instead of running user code - use a small series resistor and avoid loading it in production. Finally, flash/EEPROM erase-write during CAN traffic requires interrupt-latency budgeting; verify worst-case stack depth in the 4 KB RAM under full CAN load.
The device runs from 3.3V or 5V nominal supplies. When powering from an automotive 12V rail through a linear regulator, budget dissipation: dropping 13.5V to 5V at even 30 mA means roughly 0.26 W in the regulator, which dictates a SOT-223/DPAK regulator with copper pour rather than a SOT-23. The CAN transceiver adds its own 5V load, so size the supply for transceiver peak transmit current plus MCU active current, and add a load-dump-rated transient suppressor upstream in vehicle installations.
Информация о соответствии
RoHS compliance stated on distributor listings (DigiKey/Mouser). Full REACH and material declaration data available via NXP environmental documentation on the NXP product page. This standard-grade part is not automotive AEC-Q100 qualified; use S9S08DZ60 variants for automotive qualification.