Texas Instruments

PCM1773RGA - 24-Bit Stereo Audio DAC | Texas Instruments

Артикул: PCM1773RGA ✓ Активен
20-pin VQFN (RGA), 4.2 mm × 4.2 mm Package
MOQ: 1 |

PCM1773RGA Обзор

The Texas Instruments PCM1773RGA is a low-voltage, low-power stereo audio digital-to-analog converter with an integrated line-out amplifier and hardware control. It supports two-channel, 24-bit audio at up to 50 kHz through an I2S interface, provides 98 dB signal-to-noise ratio, and is packaged in a 20-pin VQFN (RGA) measuring 4.2 mm by 4.2 mm. Its combination of a delta-sigma DAC, integrated line output stage, and compact surface-mount package makes it suitable for compact audio systems.

A stereo audio DAC converts digital PCM samples into left- and right-channel analog voltages. The PCM1773RGA integrates that conversion function with line-out circuitry, reducing the number of external components required in typical audio signal paths. An I2S-compatible digital interface connects the converter to an audio processor, decoder, or digital audio source, while the integrated line-output stage provides an analog output suitable for subsequent voltage amplification or line-level routing.

The principal performance characteristics are 24-bit conversion resolution, 50 kHz maximum sampling performance, 98 dB SNR, and support for two audio channels. The manufacturer identifies the device as a low-voltage, low-power stereo DAC with hardware line-output control. Those characteristics place it between basic digital audio interfaces and higher-performance integrated audio converter families, where channel count, converter resolution, output topology, and control requirements determine the appropriate replacement path.

The PCM1773 family uses CMOS integrated circuitry containing stereo digital-to-analog converters, line-out circuitry, and support functions. In this configuration, the digital interface receives serial audio data while the converter reconstructs the analog waveform. The integrated line-output amplifier provides a more direct connection to the next analog stage than a bare converter output, although the exact output configuration, load capability, and gain settings must be confirmed against the manufacturer datasheet before finalizing a board design.

Typical uses include compact stereo audio playback, digital receiver and decoder designs, audio-interface modules, multimedia systems, and line-level analog output stages. The 24-bit interface is suitable for preserving source word depth, while the 98 dB SNR specification provides a clear dynamic-range figure for architecture selection. The 50 kHz sampling limit should be checked against the required source rate; designs operating at higher rates need a different converter family.

PCB planning should place the digital interface, analog outputs, bypass capacitors, and exposed thermal pad according to the manufacturer layout guidance. Maintain the required supply voltage, grounding, and output-load conditions, and account for the exposed pad when defining copper area and thermal relief. Do not assume that a same-package family member is interchangeable without verifying pin functions, control polarity, output configuration, and timing requirements.

This product page consolidates the known 24-bit, two-channel, 50 kHz, 98 dB SNR, I2S, line-out, and VQFN-20 characteristics with practical integration guidance. It also distinguishes documented device facts from engineering details that still require confirmation from the manufacturer datasheet, helping designers move from part selection to a controlled schematic and layout review.

Аналоги без доработки для PCM1773RGA — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с PCM1773RGA (тот же форм-фактор и посадочное место) — отличается по Package, Number of DAC Channels, Operating Temperature Range, Output Stage, Product Type.

Texas Instruments
Package: 20-pin VQFN (RGA)
Number of DAC Channels: 2 stereo channels
Product Type: Stereo audio digital-to-analog converter with headphone amplifier
Сравнить с PCM1773RGA →
Texas Instruments
Package: 20-pin VQFNP (RGA)
Operating Temperature Range: 0 C to 70 C
Output Stage: Integrated stereo line-out amplifier with software control
Сравнить с PCM1773RGA →

PCM1773RGAR

✅ Прямая замена ⚠️ Характеристики не проверены
📦 VQFN-20 (RGA)
Same 24-bit PCM1773 conversion and 5-50 kHz sampling ratings; ordering suffix differs, so package form and temperature must be confirmed

📋 Справочный аналог (нет в каталоге)

PCM1773RGA.B

✅ Прямая замена
📦 VQFN-20 (RGA)
Same nominal 24-bit, 5-50 kHz PCM1773 function; revised ordering suffix may alter qualification or commercial terms

📋 Справочный аналог (нет в каталоге)

PCM1772RGA

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 VQFN-20 (RGA)
Stereo audio digital-to-analog converter with line-out amplifier · 24 bit · 50 kHz · I2S · 98 dB · CMOS monolithic stereo DAC with enhanced multilevel delta-sigma conversion · Integrated stereo line-out amplifier with software control

Уточнить цену

Открыть даташит →

PCM1771RGA

✅ Прямая замена
Texas Instruments
📦 VQFN-20 (RGA)
Stereo audio digital-to-analog converter with headphone amplifier · 24 bit · 50 kHz · 98 dB · I2S · 2 stereo channels · Integrated with hardware control · Enhanced multilevel architecture with noise shaping and multilevel amplitude quantization

Уточнить цену

Открыть даташит →

PCM1770RGAR

✅ Прямая замена
📦 VQFN-20 (RGA)
Same 24-bit stereo DAC family and 5-50 kHz sampling rating; PCM1773 provides the documented hardware-control function

📋 Справочный аналог (нет в каталоге)

PCM1773RGA Максимальные параметры и электрические характеристики

Product Type Stereo audio digital-to-analog converter with line-out amplifier
Manufacturer Texas Instruments
Number of DAC Channels 2 channels
Converter Resolution 24 bit
Maximum Sampling Rate 50 kHz
Signal-to-Noise Ratio 98 dB
Digital Audio Interface I2S
DAC Architecture Delta-sigma
Output Stage Integrated stereo line-out amplifier
Output Control Hardware control
Диапазон рабочих температур 0 °C to +70 °C
Корпус 20-pin VQFN (RGA), 4.2 mm × 4.2 mm
Тип монтажа Surface mount
Process Technology CMOS

Руководство по цоколевке PCM1773RGA в корпусе 20-pin vqfn (rga), 4.2 mm × 4.2 mm

Цоколевка для PCM1773RGA (корпус 20-pin vqfn (rga), 4.2 mm × 4.2 mm). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 20-pin vqfn (rga), 4.2 mm × 4.2 mm для PCM1773RGA

Нет подробных данных о распиновке для PCM1773RGA.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

PCM1773RGA подходит для 6 применениеs: Compact Digital Audio Playback, Multimedia Audio Module, Digital Audio Receiver, Line-Level Audio Interface, Portable Audio Equipment, Audio Development Platform.

🎧

Compact Digital Audio Playback

PCM1773RGA fits compact playback systems that need to convert two-channel I2S audio into analog line-level signals. Its 24-bit conversion resolution preserves the source word depth, while the 50 kHz sampling limit must remain compatible with the encoded program material. The 98 dB SNR specification provides a defined dynamic-range target for consumer and professional playback equipment. Placing the integrated line-out stage close to the analog routing section reduces external circuitry and keeps the converter and analog output path within a compact 4.2 mm × 4.2 mm VQFN footprint.

🖥️

Multimedia Audio Module

The PCM1773RGA can provide the stereo analog output stage for a multimedia module driven by a digital audio processor. Two-channel 24-bit I2S data suits the converter's interface, and the 50 kHz maximum sampling rate covers applications that do not require higher-rate audio. With a 98 dB SNR rating and integrated line-out amplifier, it supports a practical transition from digital processing to an external voltage amplifier. Board design should separate digital routing from the analog output path and follow the manufacturer guidance for bypass capacitance and grounding.

📺

Digital Audio Receiver

In a digital receiver, PCM1773RGA can convert a recovered two-channel I2S stream into analog audio suitable for line-level routing. The 24-bit interface accommodates high-resolution source data when the upstream decoder supports it, while the 98 dB SNR figure helps preserve quiet-source detail. The converter's integrated line-out circuitry can simplify the analog path compared with a bare DAC implementation. System designers should verify source clocking, sample-rate compatibility, output loading, and the required analog gain before finalizing the receiver architecture.

🌐

Line-Level Audio Interface

PCM1773RGA is suitable for a small line-level interface that accepts digital stereo audio and exposes analog outputs to downstream processing equipment. The two-channel 24-bit architecture supports conventional stereo routing, and the 50 kHz rate covers many communication and consumer audio streams. A 98 dB SNR specification provides a useful baseline for a converter intended to preserve low-level program material. The board must meet the converter's grounding, supply, output-load, and filtering requirements while keeping sensitive analog traces away from digital clock and data paths.

📱

Portable Audio Equipment

The low-voltage, low-power positioning of PCM1773RGA makes it a candidate for portable audio products that convert a digital playback source into an analog line signal. Its compact 20-pin VQFN package leaves board area for the amplifier, storage, controls, and battery management. The converter supports 24-bit data in a two-channel I2S configuration and provides 98 dB SNR. Designers should confirm the exact supply range and power consumption, then budget thermal and power-management capacity for the complete analog output stage.

🔧

Audio Development Platform

PCM1773RGA can serve as the audio-output element of an evaluation platform designed to compare digital filtering, clocking, and analog-output behavior. Its two-channel 24-bit I2S interface provides a straightforward connection to common audio processors, while the integrated line-out amplifier creates a useful test point for downstream amplifier development. The 98 dB SNR specification gives developers a measurable baseline, and the 4.2 mm × 4.2 mm package simplifies comparison with other converter options. Firmware and board bring-up should use the manufacturer timing and application guidance.

What are the key specifications of PCM1773RGA that engineers should know?
The PCM1773RGA is a two-channel, 24-bit stereo audio DAC with a maximum sampling rate of 50 kHz, 98 dB signal-to-noise ratio, I2S digital audio interface, integrated line-out amplifier, and 20-pin VQFN package. According to the Texas Instruments product page, the device also provides hardware output control. Its 4.2 mm × 4.2 mm package supports compact PCB layouts, while its 98 dB SNR specification defines the expected dynamic-range class of the analog output stage.
What is PCM1773RGA and what does it do?
The PCM1773RGA is a Texas Instruments CMOS stereo audio digital-to-analog converter with integrated line-out circuitry. It accepts 24-bit audio through an I2S interface, supports two channels and sampling rates up to 50 kHz, and produces analog line-level outputs. According to the manufacturer description, the device combines stereo DACs, line-out amplification, and support circuitry in one 20-pin VQFN package, reducing external circuitry in compact audio products.
What is the output resolution and sampling rate of PCM1773RGA?
The PCM1773RGA supports 24-bit conversion and a maximum sampling rate of 50 kHz. The Texas Instruments product listing identifies the device as a 24-bit stereo DAC with I2S operation, while the product description identifies it as a low-voltage, low-power converter with an integrated line-out amplifier. Confirm the complete clock, channel, and format configuration in the manufacturer datasheet before selecting system clock ratios or digital audio routing.
Where can I download the PCM1773RGA datasheet PDF?
The PCM1773RGA datasheet and ordering information are available from the Texas Instruments product page for the RGA package. The manufacturer page identifies the device as a 98 dB SNR, low-power stereo DAC with line-out and hardware control. Use the manufacturer datasheet for the authoritative pin description, electrical characteristics, timing requirements, recommended application circuit, and PCB layout guidance before releasing a design to production.
Where is the PCM1773RGA pinout located?
The PCM1773RGA pinout is defined in the pin-description section of the Texas Instruments manufacturer datasheet for the 20-pin VQFN (RGA) package. The converter uses an I2S interface, hardware-controlled line output, power connections, grounds, and an exposed-pad arrangement. Assign PCB tracks only after comparing the complete pin-description and land-pattern tables, since connector assignments and control polarity must not be inferred from similar family members.
How does PCM1773RGA compare with PCM1770RGAR and PCM1771RGA?
PCM1773RGA, PCM1770RGAR, and PCM1771RGA are related PCM177x-family stereo DAC variants, but a verified pin-to-pin equivalence was not established for the comparison parts. The target provides 24-bit resolution, 50 kHz sampling, 98 dB SNR, an I2S interface, an integrated line-out amplifier, and hardware output control in VQFN-20. Check control functions, output configuration, clock requirements, and electrical limits for each candidate before considering a replacement.
Is PCM1773RGA suitable for a compact stereo audio product?
The PCM1773RGA is suitable for compact stereo audio products that use two-channel, 24-bit I2S audio at up to 50 kHz. Its integrated line-out stage, 20-pin VQFN package, and 4.2 mm × 4.2 mm body support space-constrained designs. The 98 dB SNR figure provides a useful baseline, but output loading, supply voltage, heat dissipation, channel separation, and the required line-level amplitude must also satisfy the product specification.
When should I choose PCM1773RGA instead of another stereo DAC?
Choose PCM1773RGA when the design needs a two-channel, 24-bit DAC with I2S input, up to 50 kHz sampling, 98 dB SNR, and integrated line-out amplification in a 20-pin VQFN package. Choose another family member when its control interface, output topology, sampling rate, supply range, or qualification better matches the product. Similar package dimensions alone are not sufficient grounds for interchangeability.
What can replace PCM1773RGA?
No drop-in replacement for PCM1773RGA has been verified from the available manufacturer and cross-reference material. PCM1770RGAR and PCM1771RGA are related PCM177x-family devices, but the required pin-function, electrical, and control compatibility has not been demonstrated. Treat any proposed substitution as a redesign until its complete datasheet confirms the 20-pin RGA land pattern, I2S timing, line-output behavior, power conditions, and analog performance.
What is the best cross-brand equivalent for PCM1773RGA?
No cross-brand drop-in equivalent for PCM1773RGA is established in the available cross-reference material. A valid equivalent would need the same 20-pin RGA footprint, pin-compatible I2S and control signals, compatible supply requirements, equivalent line-output configuration, and closely matched converter performance. Because the line-out amplifier and hardware control are integral to the target's value, a converter-only replacement may require additional output circuitry and PCB changes.
Can PCM1770RGAR replace PCM1773RGA without a PCB change?
PCM1770RGAR cannot be assumed to replace PCM1773RGA without a complete compatibility review. Although both are associated with the PCM177x family and VQFN packaging, the available comparison material does not establish that their pin functions, output circuitry, control polarity, supply limits, and timing characteristics are identical. Review the manufacturer datasheet for both devices and perform a board-level comparison before treating the substitution as drop-in.
Is PCM1773RGA in stock and what is its lead time?
Current stock and a production lead time should be confirmed through the Request a Quote form on this page. The product is listed by Texas Instruments as an active part in the RGA package, but stock, minimum order quantity, and lead time can change by quantity and schedule. Submit the exact MPN, target quantity, delivery location, and required date for an order-specific response.
Where can I buy PCM1773RGA online?
Use the Request a Quote form on this page to request PCM1773RGA pricing, stock confirmation, and lead time for the quantity you need. The exact RGA package and manufacturer part number should be stated in the request to avoid suffix or packaging ambiguity. A direct quote is preferable to relying on a generic listing because availability and order commitments can vary with quantity and production conditions.
What is the price of PCM1773RGA?
The current price for PCM1773RGA depends on order quantity, package suffix, and order conditions. Use the Request a Quote form on this page for the exact RGA MPN and required quantity so the commercial terms can be confirmed. The quantity and delivery details should be included in the request, particularly when multiple quantities or scheduled deliveries are needed.
How is PCM1773RGA used in an audio signal chain?
PCM1773RGA is typically placed after a digital audio source or decoder in an I2S-based signal chain. The source sends 24-bit stereo PCM data to the converter, which uses its delta-sigma DAC and integrated line-out circuitry to produce left- and right-channel analog outputs. The next stage may provide further voltage gain, drive headphones through a suitable amplifier, or route the line-level signal elsewhere. Exact loading and filtering must follow the manufacturer guidance.

Справочные инженерные данные для PCM1773RGA — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose PCM1773RGA when the product needs a two-channel, 24-bit DAC that accepts I2S audio, supports sampling up to 50 kHz, provides 98 dB SNR, and integrates a stereo line-out amplifier in a 20-pin VQFN package. It is especially useful when the analog output path must remain compact and no separate output buffer is required. Do not select it merely because another PCM177x-family device has a similar package: confirm control polarity, pin functions, clocking, output loading, supply range, and electrical limits. PCM1770RGAR and PCM1771RGA may be considered during a broader architecture review, but neither is presented here as a verified drop-in replacement. For designs requiring greater sampling rates, different digital formats, wider temperature limits, or a different output architecture, select a converter whose documented specifications directly satisfy those requirements.

Сравнение с аналогами

Параметр Этот товар
Brand Texas Instruments
Package 20-pin VQFN (RGA), 4.2 mm × 4.2 mm
Product Type Stereo audio DAC with integrated line-out amplifier
DAC Channels 2 channels
Converter Resolution 24 bit
Maximum Sampling Rate 50 kHz
Signal-to-Noise Ratio 98 dB
Digital Audio Interface I2S
Output Control Hardware control
Operating Temperature Range 0 °C to +70 °C

Ключевые отличия

  • Integrated stereo line-out stage (против PCM1770RGAR)
  • Defined 24-bit, 50 kHz conversion performance (против PCM1771RGA)
  • Compact integrated converter footprint (против PCM1773RGAR)

Заметки по проектированию

Route the I2S clock, data, and control signals away from the stereo analog outputs and the line-output return paths. Place the device-side bypass capacitors at the pins specified by the manufacturer application circuit, and use a compact, low-impedance ground return for the analog section. Review every supply connection and exposed-pad connection against the manufacturer layout drawing before fabrication.

Verify the converter supply voltage, output amplitude, and load limits before defining the power tree. The low-voltage, low-power description does not specify the permitted operating range or current consumption. Use the manufacturer electrical-characteristics table for quiescent current and operating conditions, and size the regulator for the converter plus the connected analog load rather than for the DAC alone.

Do not assume that PCM1770RGAR, PCM1771RGA, PCM1773RGAR, or another same-family part is a drop-in replacement. A valid board-level substitution requires matching pin functions, I2S timing, control polarity, output configuration, supply limits, and exposed-pad requirements. Packaging suffixes also need separate ordering review because reel or tube format is an orderable attribute, not a change in electrical functionality.

Keep digital clock routing short and controlled because the I2S clock establishes the timing reference for both channels. Use a ground-plane strategy that avoids splitting the analog return beneath the converter or line-output circuitry. Confirm output filtering and capacitive-load restrictions from the manufacturer datasheet, and test both channels for startup transients and channel-to-channel alignment at the intended sample rate.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance status is not stated in the manufacturer product information used for this page. The standard commercial PCM1773RGA ordering configuration is not identified as AEC-Q100 qualified by the available information.

Похожие запросы

PCM1773RGA datasheet PCM1773RGA pinout PCM1773RGA datasheet pdf Texas Instruments PCM1773RGA PCM1773RGA 24 bit stereo DAC PCM1773RGA 50 kHz I2S PCM1773RGA 98 dB SNR PCM1773RGA VQFN-20 RGA PCM1773RGA audio converter PCM1773RGA vs PCM1771RGA PCM1773RGA drop-in replacement PCM1773RGA cross reference PCM1773RGA equivalent PCM1773RGA price PCM1773RGA stock

Связанные компоненты & термины

Texas Instruments PCM1773RGA PCM1770RGAR PCM1771RGA PCM1773RGAR stereo audio DAC digital-to-analog converter delta-sigma DAC audio converter IC line-out amplifier I2S signal-to-noise ratio SNR 24-bit resolution 50 kHz sampling rate VQFN-20 VQFN package family surface-mount package CMOS integrated circuit hardware control line-level audio compact audio system
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ