PCM1773RGA - 24-Bit Stereo Audio DAC | Texas Instruments
部品番号: PCM1773RGA ✓ 生産中PCM1773RGA 概要
A stereo audio DAC converts digital PCM samples into left- and right-channel analog voltages. The PCM1773RGA integrates that conversion function with line-out circuitry, reducing the number of external components required in typical audio signal paths. An I2S-compatible digital interface connects the converter to an audio processor, decoder, or digital audio source, while the integrated line-output stage provides an analog output suitable for subsequent voltage amplification or line-level routing.
The principal performance characteristics are 24-bit conversion resolution, 50 kHz maximum sampling performance, 98 dB SNR, and support for two audio channels. The manufacturer identifies the device as a low-voltage, low-power stereo DAC with hardware line-output control. Those characteristics place it between basic digital audio interfaces and higher-performance integrated audio converter families, where channel count, converter resolution, output topology, and control requirements determine the appropriate replacement path.
The PCM1773 family uses CMOS integrated circuitry containing stereo digital-to-analog converters, line-out circuitry, and support functions. In this configuration, the digital interface receives serial audio data while the converter reconstructs the analog waveform. The integrated line-output amplifier provides a more direct connection to the next analog stage than a bare converter output, although the exact output configuration, load capability, and gain settings must be confirmed against the manufacturer datasheet before finalizing a board design.
Typical uses include compact stereo audio playback, digital receiver and decoder designs, audio-interface modules, multimedia systems, and line-level analog output stages. The 24-bit interface is suitable for preserving source word depth, while the 98 dB SNR specification provides a clear dynamic-range figure for architecture selection. The 50 kHz sampling limit should be checked against the required source rate; designs operating at higher rates need a different converter family.
PCB planning should place the digital interface, analog outputs, bypass capacitors, and exposed thermal pad according to the manufacturer layout guidance. Maintain the required supply voltage, grounding, and output-load conditions, and account for the exposed pad when defining copper area and thermal relief. Do not assume that a same-package family member is interchangeable without verifying pin functions, control polarity, output configuration, and timing requirements.
This product page consolidates the known 24-bit, two-channel, 50 kHz, 98 dB SNR, I2S, line-out, and VQFN-20 characteristics with practical integration guidance. It also distinguishes documented device facts from engineering details that still require confirmation from the manufacturer datasheet, helping designers move from part selection to a controlled schematic and layout review.
ドロップイン代替品: PCM1773RGA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PCM1773RGA (同一形状・フットプリント) — 相違点: Package, Number of DAC Channels, Operating Temperature Range, Output Stage, Product Type.
PCM1773RGAR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
PCM1773RGA.B
✅ ドロップイン📋 参考代替品(カタログ未掲載)
PCM1772RGA
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →PCM1771RGA
✅ ドロップイン価格はお問い合わせください
データシートを見る →PCM1770RGAR
✅ ドロップイン📋 参考代替品(カタログ未掲載)
PCM1773RGA 最大定格&電気的特性
| Product Type | Stereo audio digital-to-analog converter with line-out amplifier |
| Manufacturer | Texas Instruments |
| Number of DAC Channels | 2 channels |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 50 kHz |
| Signal-to-Noise Ratio | 98 dB |
| Digital Audio Interface | I2S |
| DAC Architecture | Delta-sigma |
| Output Stage | Integrated stereo line-out amplifier |
| Output Control | Hardware control |
| 動作温度範囲 | 0 °C to +70 °C |
| パッケージ | 20-pin VQFN (RGA), 4.2 mm × 4.2 mm |
| 実装タイプ | Surface mount |
| Process Technology | CMOS |
PCM1773RGA 20-pin vqfn (rga), 4.2 mm × 4.2 mm ピン配置ガイド
PCM1773RGA (20-pin vqfn (rga), 4.2 mm × 4.2 mm パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: PCM1773RGA.
詳細は データシート をご参照ください。
主な用途
PCM1773RGA の用途: 6 件s: Compact Digital Audio Playback, Multimedia Audio Module, Digital Audio Receiver, Line-Level Audio Interface, Portable Audio Equipment, Audio Development Platform.
Compact Digital Audio Playback
PCM1773RGA fits compact playback systems that need to convert two-channel I2S audio into analog line-level signals. Its 24-bit conversion resolution preserves the source word depth, while the 50 kHz sampling limit must remain compatible with the encoded program material. The 98 dB SNR specification provides a defined dynamic-range target for consumer and professional playback equipment. Placing the integrated line-out stage close to the analog routing section reduces external circuitry and keeps the converter and analog output path within a compact 4.2 mm × 4.2 mm VQFN footprint.
おすすめ
Multimedia Audio Module
The PCM1773RGA can provide the stereo analog output stage for a multimedia module driven by a digital audio processor. Two-channel 24-bit I2S data suits the converter's interface, and the 50 kHz maximum sampling rate covers applications that do not require higher-rate audio. With a 98 dB SNR rating and integrated line-out amplifier, it supports a practical transition from digital processing to an external voltage amplifier. Board design should separate digital routing from the analog output path and follow the manufacturer guidance for bypass capacitance and grounding.
おすすめ
Digital Audio Receiver
In a digital receiver, PCM1773RGA can convert a recovered two-channel I2S stream into analog audio suitable for line-level routing. The 24-bit interface accommodates high-resolution source data when the upstream decoder supports it, while the 98 dB SNR figure helps preserve quiet-source detail. The converter's integrated line-out circuitry can simplify the analog path compared with a bare DAC implementation. System designers should verify source clocking, sample-rate compatibility, output loading, and the required analog gain before finalizing the receiver architecture.
おすすめ
Line-Level Audio Interface
PCM1773RGA is suitable for a small line-level interface that accepts digital stereo audio and exposes analog outputs to downstream processing equipment. The two-channel 24-bit architecture supports conventional stereo routing, and the 50 kHz rate covers many communication and consumer audio streams. A 98 dB SNR specification provides a useful baseline for a converter intended to preserve low-level program material. The board must meet the converter's grounding, supply, output-load, and filtering requirements while keeping sensitive analog traces away from digital clock and data paths.
おすすめ
Portable Audio Equipment
The low-voltage, low-power positioning of PCM1773RGA makes it a candidate for portable audio products that convert a digital playback source into an analog line signal. Its compact 20-pin VQFN package leaves board area for the amplifier, storage, controls, and battery management. The converter supports 24-bit data in a two-channel I2S configuration and provides 98 dB SNR. Designers should confirm the exact supply range and power consumption, then budget thermal and power-management capacity for the complete analog output stage.
おすすめ
Audio Development Platform
PCM1773RGA can serve as the audio-output element of an evaluation platform designed to compare digital filtering, clocking, and analog-output behavior. Its two-channel 24-bit I2S interface provides a straightforward connection to common audio processors, while the integrated line-out amplifier creates a useful test point for downstream amplifier development. The 98 dB SNR specification gives developers a measurable baseline, and the 4.2 mm × 4.2 mm package simplifies comparison with other converter options. Firmware and board bring-up should use the manufacturer timing and application guidance.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PCM1773RGA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Texas Instruments |
| Package | 20-pin VQFN (RGA), 4.2 mm × 4.2 mm |
| Product Type | Stereo audio DAC with integrated line-out amplifier |
| DAC Channels | 2 channels |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 50 kHz |
| Signal-to-Noise Ratio | 98 dB |
| Digital Audio Interface | I2S |
| Output Control | Hardware control |
| Operating Temperature Range | 0 °C to +70 °C |
主な差別化要因
- Integrated stereo line-out stage (vs PCM1770RGAR)
- Defined 24-bit, 50 kHz conversion performance (vs PCM1771RGA)
- Compact integrated converter footprint (vs PCM1773RGAR)
設計ノート
Route the I2S clock, data, and control signals away from the stereo analog outputs and the line-output return paths. Place the device-side bypass capacitors at the pins specified by the manufacturer application circuit, and use a compact, low-impedance ground return for the analog section. Review every supply connection and exposed-pad connection against the manufacturer layout drawing before fabrication.
Verify the converter supply voltage, output amplitude, and load limits before defining the power tree. The low-voltage, low-power description does not specify the permitted operating range or current consumption. Use the manufacturer electrical-characteristics table for quiescent current and operating conditions, and size the regulator for the converter plus the connected analog load rather than for the DAC alone.
Do not assume that PCM1770RGAR, PCM1771RGA, PCM1773RGAR, or another same-family part is a drop-in replacement. A valid board-level substitution requires matching pin functions, I2S timing, control polarity, output configuration, supply limits, and exposed-pad requirements. Packaging suffixes also need separate ordering review because reel or tube format is an orderable attribute, not a change in electrical functionality.
Keep digital clock routing short and controlled because the I2S clock establishes the timing reference for both channels. Use a ground-plane strategy that avoids splitting the analog return beneath the converter or line-output circuitry. Confirm output filtering and capacitive-load restrictions from the manufacturer datasheet, and test both channels for startup transients and channel-to-channel alignment at the intended sample rate.
コンプライアンス情報
Compliance status is not stated in the manufacturer product information used for this page. The standard commercial PCM1773RGA ordering configuration is not identified as AEC-Q100 qualified by the available information.