PCM1773RGA - 24-Bit Stereo Audio DAC | Texas Instruments
料号: PCM1773RGA ✓ 量产中PCM1773RGA 概述
A stereo audio DAC converts digital PCM samples into left- and right-channel analog voltages. The PCM1773RGA integrates that conversion function with line-out circuitry, reducing the number of external components required in typical audio signal paths. An I2S-compatible digital interface connects the converter to an audio processor, decoder, or digital audio source, while the integrated line-output stage provides an analog output suitable for subsequent voltage amplification or line-level routing.
The principal performance characteristics are 24-bit conversion resolution, 50 kHz maximum sampling performance, 98 dB SNR, and support for two audio channels. The manufacturer identifies the device as a low-voltage, low-power stereo DAC with hardware line-output control. Those characteristics place it between basic digital audio interfaces and higher-performance integrated audio converter families, where channel count, converter resolution, output topology, and control requirements determine the appropriate replacement path.
The PCM1773 family uses CMOS integrated circuitry containing stereo digital-to-analog converters, line-out circuitry, and support functions. In this configuration, the digital interface receives serial audio data while the converter reconstructs the analog waveform. The integrated line-output amplifier provides a more direct connection to the next analog stage than a bare converter output, although the exact output configuration, load capability, and gain settings must be confirmed against the manufacturer datasheet before finalizing a board design.
Typical uses include compact stereo audio playback, digital receiver and decoder designs, audio-interface modules, multimedia systems, and line-level analog output stages. The 24-bit interface is suitable for preserving source word depth, while the 98 dB SNR specification provides a clear dynamic-range figure for architecture selection. The 50 kHz sampling limit should be checked against the required source rate; designs operating at higher rates need a different converter family.
PCB planning should place the digital interface, analog outputs, bypass capacitors, and exposed thermal pad according to the manufacturer layout guidance. Maintain the required supply voltage, grounding, and output-load conditions, and account for the exposed pad when defining copper area and thermal relief. Do not assume that a same-package family member is interchangeable without verifying pin functions, control polarity, output configuration, and timing requirements.
This product page consolidates the known 24-bit, two-channel, 50 kHz, 98 dB SNR, I2S, line-out, and VQFN-20 characteristics with practical integration guidance. It also distinguishes documented device facts from engineering details that still require confirmation from the manufacturer datasheet, helping designers move from part selection to a controlled schematic and layout review.
直接替换替代料: PCM1773RGA ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PCM1773RGA (相同外形与封装尺寸) ——差异在于 Package, Number of DAC Channels, Operating Temperature Range, Output Stage, Product Type.
PCM1773RGAR
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
PCM1773RGA.B
✅ 直接替换📋 参考替代料(不在目录中)
PCM1772RGA
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →PCM1771RGA
✅ 直接替换联系询价
查看数据手册 →PCM1770RGAR
✅ 直接替换📋 参考替代料(不在目录中)
PCM1773RGA 最大额定值与电气特性
| Product Type | Stereo audio digital-to-analog converter with line-out amplifier |
| Manufacturer | Texas Instruments |
| Number of DAC Channels | 2 channels |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 50 kHz |
| Signal-to-Noise Ratio | 98 dB |
| Digital Audio Interface | I2S |
| DAC Architecture | Delta-sigma |
| Output Stage | Integrated stereo line-out amplifier |
| Output Control | Hardware control |
| 工作温度范围 | 0 °C to +70 °C |
| 封装 | 20-pin VQFN (RGA), 4.2 mm × 4.2 mm |
| 安装类型 | Surface mount |
| Process Technology | CMOS |
PCM1773RGA 20-pin vqfn (rga), 4.2 mm × 4.2 mm 引脚配置指南
PCM1773RGA(20-pin vqfn (rga), 4.2 mm × 4.2 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: PCM1773RGA.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PCM1773RGA 适用于 6 应用s: Compact Digital Audio Playback, Multimedia Audio Module, Digital Audio Receiver, Line-Level Audio Interface, Portable Audio Equipment, Audio Development Platform.
Compact Digital Audio Playback
PCM1773RGA fits compact playback systems that need to convert two-channel I2S audio into analog line-level signals. Its 24-bit conversion resolution preserves the source word depth, while the 50 kHz sampling limit must remain compatible with the encoded program material. The 98 dB SNR specification provides a defined dynamic-range target for consumer and professional playback equipment. Placing the integrated line-out stage close to the analog routing section reduces external circuitry and keeps the converter and analog output path within a compact 4.2 mm × 4.2 mm VQFN footprint.
推荐
Multimedia Audio Module
The PCM1773RGA can provide the stereo analog output stage for a multimedia module driven by a digital audio processor. Two-channel 24-bit I2S data suits the converter's interface, and the 50 kHz maximum sampling rate covers applications that do not require higher-rate audio. With a 98 dB SNR rating and integrated line-out amplifier, it supports a practical transition from digital processing to an external voltage amplifier. Board design should separate digital routing from the analog output path and follow the manufacturer guidance for bypass capacitance and grounding.
推荐
Digital Audio Receiver
In a digital receiver, PCM1773RGA can convert a recovered two-channel I2S stream into analog audio suitable for line-level routing. The 24-bit interface accommodates high-resolution source data when the upstream decoder supports it, while the 98 dB SNR figure helps preserve quiet-source detail. The converter's integrated line-out circuitry can simplify the analog path compared with a bare DAC implementation. System designers should verify source clocking, sample-rate compatibility, output loading, and the required analog gain before finalizing the receiver architecture.
推荐
Line-Level Audio Interface
PCM1773RGA is suitable for a small line-level interface that accepts digital stereo audio and exposes analog outputs to downstream processing equipment. The two-channel 24-bit architecture supports conventional stereo routing, and the 50 kHz rate covers many communication and consumer audio streams. A 98 dB SNR specification provides a useful baseline for a converter intended to preserve low-level program material. The board must meet the converter's grounding, supply, output-load, and filtering requirements while keeping sensitive analog traces away from digital clock and data paths.
推荐
Portable Audio Equipment
The low-voltage, low-power positioning of PCM1773RGA makes it a candidate for portable audio products that convert a digital playback source into an analog line signal. Its compact 20-pin VQFN package leaves board area for the amplifier, storage, controls, and battery management. The converter supports 24-bit data in a two-channel I2S configuration and provides 98 dB SNR. Designers should confirm the exact supply range and power consumption, then budget thermal and power-management capacity for the complete analog output stage.
推荐
Audio Development Platform
PCM1773RGA can serve as the audio-output element of an evaluation platform designed to compare digital filtering, clocking, and analog-output behavior. Its two-channel 24-bit I2S interface provides a straightforward connection to common audio processors, while the integrated line-out amplifier creates a useful test point for downstream amplifier development. The 98 dB SNR specification gives developers a measurable baseline, and the 4.2 mm × 4.2 mm package simplifies comparison with other converter options. Firmware and board bring-up should use the manufacturer timing and application guidance.
推荐
推荐产品汇总
工程参考数据: PCM1773RGA ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Texas Instruments |
| Package | 20-pin VQFN (RGA), 4.2 mm × 4.2 mm |
| Product Type | Stereo audio DAC with integrated line-out amplifier |
| DAC Channels | 2 channels |
| Converter Resolution | 24 bit |
| Maximum Sampling Rate | 50 kHz |
| Signal-to-Noise Ratio | 98 dB |
| Digital Audio Interface | I2S |
| Output Control | Hardware control |
| Operating Temperature Range | 0 °C to +70 °C |
关键差异点
- Integrated stereo line-out stage (对比 PCM1770RGAR)
- Defined 24-bit, 50 kHz conversion performance (对比 PCM1771RGA)
- Compact integrated converter footprint (对比 PCM1773RGAR)
设计说明
Route the I2S clock, data, and control signals away from the stereo analog outputs and the line-output return paths. Place the device-side bypass capacitors at the pins specified by the manufacturer application circuit, and use a compact, low-impedance ground return for the analog section. Review every supply connection and exposed-pad connection against the manufacturer layout drawing before fabrication.
Verify the converter supply voltage, output amplitude, and load limits before defining the power tree. The low-voltage, low-power description does not specify the permitted operating range or current consumption. Use the manufacturer electrical-characteristics table for quiescent current and operating conditions, and size the regulator for the converter plus the connected analog load rather than for the DAC alone.
Do not assume that PCM1770RGAR, PCM1771RGA, PCM1773RGAR, or another same-family part is a drop-in replacement. A valid board-level substitution requires matching pin functions, I2S timing, control polarity, output configuration, supply limits, and exposed-pad requirements. Packaging suffixes also need separate ordering review because reel or tube format is an orderable attribute, not a change in electrical functionality.
Keep digital clock routing short and controlled because the I2S clock establishes the timing reference for both channels. Use a ground-plane strategy that avoids splitting the analog return beneath the converter or line-output circuitry. Confirm output filtering and capacitive-load restrictions from the manufacturer datasheet, and test both channels for startup transients and channel-to-channel alignment at the intended sample rate.
合规信息
Compliance status is not stated in the manufacturer product information used for this page. The standard commercial PCM1773RGA ordering configuration is not identified as AEC-Q100 qualified by the available information.