STM32F407ZGT6J - 168MHz Cortex-M4 1MB MCU | STMicroelectronics
Артикул: STM32F407ZGT6J ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
STM32F407ZGT6J Обзор
A microcontroller is a programmable integrated circuit that executes firmware, reads sensors, controls actuators, and manages communication interfaces. The STM32F4 family belongs to the embedded-processing hierarchy: MCU -> 32-bit RISC microcontroller -> Arm Cortex-M4 microcontroller -> STM32 family. The STM32F407ZGT6J is suited to applications requiring substantial flash storage, high processing throughput, and multiple peripheral interfaces.
According to the STMicroelectronics product page and manufacturer datasheet, the device uses an Arm Cortex-M4 core with FPU and DSP support, reaches up to 168 MHz, and provides 1 MB of Flash. The supplied distributor data identifies a 144-LQFP package and a 20 mm by 20 mm body size. Its Ethernet MAC, camera interface, USB connectivity, and serial peripherals make it useful for industrial gateways, data acquisition equipment, audio systems, and network-connected controllers.
The 168 MHz Cortex-M4 core supports high-performance control and signal-processing tasks, while the 1 MB Flash capacity accommodates larger firmware images and boot code. The ART Accelerator is identified in the manufacturer family datasheet as supporting zero-wait-state execution from Flash. Exact peripheral pin assignments, memory details, electrical limits, and package dimensions not explicitly provided in the supplied data remain subject to verification against the manufacturer datasheet.
Typical applications include industrial monitoring, Ethernet-connected embedded controllers, camera-based vision equipment, USB peripherals, audio processing, and real-time control systems. The 144-LQFP package provides a large pin count relative to smaller MCU packages, supporting broad peripheral connectivity while requiring careful PCB layout and thermal validation. Engineers should confirm all alternate-function assignments, power requirements, decoupling, clock configuration, and programming support against the exact device datasheet.
This page consolidates verified distributor and manufacturer information with sourcing, comparison, pin-compatibility, and design guidance. The alternatives listed are presented only where the supplied cross-reference evidence supports an aligned STM32F407-class package; engineers must still validate firmware, peripheral mapping, electrical limits, and qualification requirements before production substitution.
Аналоги без доработки для STM32F407ZGT6J — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с STM32F407ZGT6J (тот же форм-фактор и посадочное место) — отличается по Package, Flash Memory, Communication Interfaces, Core, SRAM.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
Для этого товара нет аналогов без доработки.
Запросить аналогиSTM32F407ZGT6J Максимальные параметры и электрические характеристики
| Core | Arm Cortex-M4 32-bit RISC with FPU |
| Maximum CPU Frequency | 168 MHz |
| Flash Memory | 1 MB |
| Flash Organization | 1M x 8 |
| Architecture | 32-bit |
| DSP Support | Yes |
| ART Accelerator | Yes |
| Корпус | 144-LQFP |
| Package Body Size | 20 mm x 20 mm |
| Тип монтажа | Surface Mount |
| Ethernet MAC | Yes |
| Camera Interface | Yes |
| Operating Voltage | 2.5 V / 3.3 V |
| CPU Performance | 210 DMIPS |
| Family | STM32F4 Series |
| Manufacturer Product Page | STM32F407ZG |
Руководство по цоколевке STM32F407ZGT6J в корпусе 20 mm x 20 mm
Цоколевка для STM32F407ZGT6J (корпус 20 mm x 20 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для STM32F407ZGT6J.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
STM32F407ZGT6J подходит для 6 применениеs: Industrial Monitoring Gateway, Camera-Based Vision Controller, USB Data Acquisition Device, Real-Time Control System, Networked Embedded Controller, Audio Processing Module.
Industrial Monitoring Gateway
The STM32F407ZGT6J fits industrial monitoring gateways because its Arm Cortex-M4 core operates up to 168 MHz and provides 1 MB of Flash for protocol, logging, and application firmware. Use the MCU to acquire sensor data, format local records, supervise operating states, and forward information through an Ethernet MAC. The 144-LQFP package exposes a broad pin count for serial peripherals and control signals, but the final design must follow the official STM32F407ZG pin table and power guidelines. Validate EMC, isolation, thermal performance, and long-term availability for the installation environment.
Рекомендуется
Camera-Based Vision Controller
The STM32F407ZGT6J is suitable for camera-based vision control because the STM32F407 family includes a camera interface and a Cortex-M4F core with DSP instructions. The controller can synchronize image capture, perform sensor pre-processing, manage exposure or motion-control signals, and communicate results through USB or Ethernet. Its 1 MB of Flash supports embedded control code, while the 144-LQFP package provides numerous signal connections. Camera timing, pin multiplexing, voltage levels, memory bandwidth, and connector protection must be checked against the exact reference design before production.
Рекомендуется
USB Data Acquisition Device
The STM32F407ZGT6J can serve as the control processor in a USB data-acquisition product with 1 MB of Flash for firmware, USB device or host coordination, data buffering, and configuration management. Its Cortex-M4F architecture supports fixed-point or floating-point signal-processing work, while serial peripherals can connect to sensors and external converters. Place USB routing and power paths carefully to preserve signal integrity, and validate USB electrical compliance with the selected transceiver and connector. The supplied data does not specify USB operating roles or transceiver requirements, so those details require confirmation from the manufacturer documentation.
Рекомендуется
Real-Time Control System
The STM32F407ZGT6J provides the processing throughput for real-time control systems requiring deterministic interrupt handling, timer-based sequencing, and peripheral connectivity. Its Cortex-M4F core runs up to 168 MHz and includes an FPU and DSP support, making it more suitable for control calculations than a basic 8-bit microcontroller. The 144-LQFP package supports multiple external connections, but high-speed and sensitive signals need controlled routing and a complete ground reference. Verify timer clock sources, peripheral pin assignments, latency, memory wait states, and thermal conditions in the official datasheet.
Рекомендуется
Networked Embedded Controller
The STM32F407ZGT6J is appropriate for a networked embedded controller because the STM32F407 family provides Ethernet MAC capability alongside a 168 MHz Cortex-M4 core. It can coordinate local control loops, collect machine state, and exchange diagnostics with a remote system. Use the Ethernet interface only after confirming the required PHY, magnetics, clock, reference-clock, and board-level isolation arrangement. The supplied data does not confirm a specific Ethernet PHY or magnetics part, so the final bill of materials should be based on the STMicroelectronics reference design and validated signal-integrity results.
Рекомендуется
Audio Processing Module
The STM32F407ZGT6J can support embedded audio functions because its Cortex-M4F core includes DSP and floating-point capabilities, while the 1 MB of Flash accommodates control software and audio-related configuration. The MCU can manage digital audio data movement, control amplifiers or codecs, and provide user interfaces through serial peripherals. Audio-clock jitter, DMA behavior, interrupt latency, and grounding are more important than raw processor frequency for sound quality. The supplied material does not identify a specific codec or audio interface, so select and validate those companions from the manufacturer reference designs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для STM32F407ZGT6J — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | STM32F407ZGT6 | STM32F407ZGT6TR | STM32F415ZGT6 | GD32F407 |
|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | GigaDevice |
| Package | 144-LQFP | 144-LQFP | 144-LQFP | 144-LQFP | Aligned 144-LQFP option; exact package verification required |
| CPU Core | Arm Cortex-M4 32-bit RISC | STM32F407ZG Cortex-M4 family | STM32F407ZG Cortex-M4 family | Arm Cortex-M4 family | STM32F407-class functional alternative; exact core details require verification |
Ключевые отличия
- Verified STM32F407ZG family identity (против STM32F415ZGT6)
- Exact manufacturer product-page context (против GD32F407)
- 1 MB Flash and 168 MHz Cortex-M4 positioning (против STM32F407ZGT6)
Заметки по проектированию
Power planning must account for the STM32F407ZGT6J's high-performance 168 MHz Cortex-M4 core, analog peripherals, external interfaces, and the I/O current required by attached circuitry. The supplied data identifies 2.5 V and 3.3 V operating conditions but does not provide the complete regulator, decoupling, or current-limit tables. Follow the official STM32F407ZG reference design, place required bypass capacitors close to the device, and verify regulator headroom for the actual clock, peripheral, and I/O load.
Use a continuous ground reference and place the device power, ground, and decoupling network in accordance with the STMicroelectronics reference layout. A 144-LQFP package has fine-pitch leads, so fanout, via placement, soldering profile, and copper thermal relief require controlled PCB design. Keep sensitive analog and communication routes away from high-current switching paths where practical, and validate impedance and return-current continuity for Ethernet, USB, camera, or other high-speed interfaces.
Treat clock, Ethernet, USB, camera, and other high-speed signals as controlled-impedance routes when their interface requirements demand it. Maintain continuous reference planes, minimize vias and stubs, and keep return paths beneath the signal trace. Do not infer pin multiplexing or signal-level compatibility from the package name alone; cross-check every alternate-function assignment against the official STM32F407ZG datasheet. For a replacement MCU, repeat signal-integrity and EMC testing even when the package appears identical.
A common migration mistake is treating every STM32F4 device in a 144-LQFP package as automatically interchangeable. Check exact package drawing, pin names, alternate functions, power pins, clock pins, reset behavior, memory configuration, peripheral mapping, and firmware support. The supplied cross-reference material identifies GD32F407 as a functional alternative, but it also calls for pin-table and firmware validation. Treat unverified suffix or temperature-grade differences as potential blockers, not cosmetic ordering-code changes.
Информация о соответствии
The supplied web results identify the manufacturer, family, package, core, memory, and connectivity, but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Obtain current compliance documentation for the exact ordering code.
