Texas Instruments

TLV2374ID - 16V 3MHz Quad RRIO Op Amp | Texas Instruments

Артикул: TLV2374ID ✓ Активен
16 V Vdss 550 uA Id 14-pin SOIC Package
MOQ: 1 |

TLV2374ID Обзор

The Texas Instruments TLV2374ID is a quad, 16 V, 3 MHz rail-to-rail input/output operational amplifier with 550 uA of supply current per channel, supplied in a 14-pin SOIC package. Its combination of low power, a 3 MHz gain-bandwidth product, and rail-to-rail input and output capability supports portable instrumentation, sensor interfaces, audio paths, and industrial control systems where four amplifiers share one supply.

An operational amplifier, or op amp, is a high-gain analog building block used to amplify small voltage signals, buffer inputs, perform active filtering, and drive downstream circuits. The TLV2374 belongs to the voltage-feedback amplifier hierarchy within the broader operational-amplifier and analog-signal-chain category. Four independent amplifiers in one package can reduce board area and simplify routing when a system requires multiple sensing or signal-conditioning channels.

The TLV2374ID combines rail-to-rail input and output operation with a 550 uA per-channel supply-current rating. Its 3 MHz gain-bandwidth product provides more bandwidth than many micropower amplifiers and makes it suitable for moderate-speed filtering and signal amplification. The 16 V maximum supply rating supports conventional 5 V, 8.4 V, and 12 V analog rails used in industrial equipment. Rail-to-rail operation extends usable input and output range toward the supply limits, although output-headroom and load-current limits must still be respected.

The device is intended for low-power, general-purpose analog designs and is identified by Texas Instruments as a standard instrumentation amplifier-family op amp. Four channels in one package can implement matched gain stages, differential-to-single-ended signal conversion, active filters, or sensor-conditioning channels. The 3 MHz bandwidth and low 550 uA per-channel current create a useful operating point when a design needs faster response than ultra-low-power amplifiers but does not justify the power and cost of a high-performance amplifier.

Typical applications include battery-powered sensor interfaces, industrial transducers, portable measurement equipment, audio input stages, and low-frequency active filters. Its low channel current is valuable in systems where four continuously operating amplifiers could dominate the standby-power budget. Where a signal changes rapidly, verify the closed-loop bandwidth, output-swing behavior, settling time, and capacitive-load drive required by the application.

PCB design should preserve the compactness benefit of the quad package without compromising analog performance. Place each bypassing capacitor close to its corresponding supply pin, route high-impedance input nodes with short traces and minimal parasitic capacitance, and keep output paths away from switching nodes. Confirm stability with the actual source impedance, load, and feedback network because amplifier behavior can change when driving capacitive loads or operating near the supply rails.

This page combines manufacturer device information with package-level engineering guidance, application fit, comparison criteria, and drop-in replacement considerations. The TLV2374ID datasheet remains the controlling reference for the complete electrical characteristics, pin assignments, recommended operating conditions, and test conditions used in a production design.

Аналоги без доработки для TLV2374ID — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с TLV2374ID (тот же форм-фактор и посадочное место) — отличается по Amplifier Type, Number of Channels, Gain-Bandwidth Product, Package, Maximum Supply Voltage.

Texas Instruments
Amplifier Type: General-purpose operational amplifier
Gain-Bandwidth Product: 300 kHz
Maximum Supply Voltage: 8 V
Сравнить с TLV2374ID →
Texas Instruments
Amplifier Type: Single operational amplifier
Number of Channels: 1 channel
Package: 8-pin SOIC
Сравнить с TLV2374ID →
Texas Instruments
Amplifier Type: Dual operational amplifier
Number of Channels: 2 channels
Package: 8-pin SOIC
Сравнить с TLV2374ID →

TLV2374IDR

✅ Прямая замена
📦 14-SOIC
Same 14-SOIC footprint and core 16 V, 3 MHz, 550 uA/channel electrical configuration; only the tape-and-reel shipping format differs, so key parameters differ by 0%.

📋 Справочный аналог (нет в каталоге)

TLV2374IDG4

✅ Прямая замена
📦 14-SOIC
Same 14-SOIC footprint and core 16 V, 3 MHz, 550 uA/channel electrical configuration; the green-roHS-compliant shipping designation differs, so key parameters differ by 0%.

📋 Справочный аналог (нет в каталоге)

TLV2374ID Максимальные параметры и электрические характеристики

Amplifier Type Quad general-purpose operational amplifier
Number of Channels 4 channels
Maximum Supply Voltage 16 V
Minimum Operating Supply Voltage 2.7 V
Gain-Bandwidth Product 3 MHz
Supply Current per Channel 550 uA
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Корпус 14-pin SOIC
Тип монтажа Surface mount

Руководство по цоколевке TLV2374ID в корпусе 14-pin soic

Цоколевка для TLV2374ID (корпус 14-pin soic). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 14-pin soic для TLV2374ID

Нет подробных данных о распиновке для TLV2374ID.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

TLV2374ID подходит для 6 применениеs: Battery-Powered Sensor Conditioning, Industrial Transducer Interface, Portable Measurement Equipment, Audio Input Conditioning, Active Filtering and Active Filters, Low-Voltage Control Systems.

🧩

Battery-Powered Sensor Conditioning

The TLV2374ID fits battery-powered sensor-conditioning designs that need four low-power analog channels without accepting the bandwidth limit of an ultra-low-power amplifier. Its 550 uA supply current per channel and 2.7 V minimum operating voltage help constrain battery drain, while the 3 MHz gain-bandwidth product provides useful margin for gain and filtering stages. Place the amplifier close to the sensor interface, use short input routes, and bypass the supply locally. Check the complete sensor excitation and output-swing requirements because low supply voltage and heavy loading can reduce usable output range even when rail-to-rail operation is specified.

🏭

Industrial Transducer Interface

The TLV2374ID is suitable for industrial transducer interfaces that require several gain or buffer channels around one sensor or control node. Its quad configuration allows up to four 16 V operational amplifiers in one 14-pin SOIC package, while 550 uA per channel supports lower-power instrumentation. The 3 MHz gain-bandwidth product is suitable for many temperature, pressure, position, and bridge-sensor conditioning paths. Validate excitation frequency, input impedance, offset accuracy, and output drive against the transducer, and isolate high-current switching nodes from the sensitive analog section.

📱

Portable Measurement Equipment

The TLV2374ID supports compact handheld and portable measurement equipment where four amplifiers can provide input buffering, active filtering, level conversion, and output conditioning. A 2.7 V minimum supply supports energy-conscious designs, while 550 uA per channel avoids making amplifier bias current the dominant load. The 3 MHz bandwidth gives useful margin for filters with moderate corner frequencies, but the design must account for output headroom at low supply voltages. Use short feedback traces, solid grounding, and local supply bypassing to preserve accuracy and stability.

🎧

Audio Input Conditioning

The TLV2374ID can provide general-purpose preamplifier, buffer, and crossover stages for line-level or low-level audio signals. Rail-to-rail input and output operation is useful when the signal occupies a large portion of a low-voltage supply, and the 3 MHz gain-bandwidth product exceeds the bandwidth of many audio-band signals. The four-channel package supports stereo or multi-channel routing. Check input-noise density, distortion, output-current capability, and load stability because the device is a general-purpose instrumentation amplifier rather than a dedicated low-noise audio part.

🔧

Active Filtering and Active Filters

The TLV2374ID is appropriate for multiple active-filter channels in measurement and control systems because each amplifier provides a 3 MHz gain-bandwidth product within a 550 uA per-channel power budget. Four channels can implement low-pass, high-pass, or notch stages without requiring separate packages. Select feedback resistors and capacitors for the intended corner frequencies, keep the feedback loop compact, and confirm phase margin with the actual source and load impedances. Avoid placing sensitive filter nodes next to switching-regulator traces or high-impedance sensor connections.

⚡

Low-Voltage Control Systems

The TLV2374ID fits compact low-voltage control systems requiring multiple amplifiers for error amplifiers, comparators, current loops, and actuator-signal conditioning. Operation from 2.7 V supports reduced-energy electronics, while rail-to-rail input and output behavior helps utilize narrow supply ranges. The 3 MHz bandwidth is useful for control loops that are faster than audio-band applications. Review the complete control-loop stability, output-swing, capacitive-load, and slew-rate requirements in the manufacturer datasheet, and add decoupling close to the package pins.

What is the TLV2374ID?
The TLV2374ID is a Texas Instruments quad, 16 V, 3 MHz rail-to-rail input/output operational amplifier with 550 uA of supply current per channel. According to the TLV2374 manufacturer product page, it is intended for low-power, general-purpose analog applications and is offered in a 14-pin SOIC package. The four-channel integration reduces board area when a design requires multiple amplifiers operating from the same supply.
What is the operating voltage range of TLV2374ID?
The TLV2374ID operates from a minimum supply voltage of 2.7 V to a maximum rating of 16 V. Texas Instruments describes the device as a 16 V quad operational amplifier with rail-to-rail input and output capability. The 2.7 V minimum supports low-energy analog systems, while the 16 V maximum accommodates conventional industrial rails, although each amplifier must retain adequate output headroom under load.
What are the key specifications of TLV2374ID that engineers should know?
The key TLV2374ID specifications are four amplifier channels, a 3 MHz gain-bandwidth product, 550 uA of supply current per channel, operation up to 16 V, and rail-to-rail input and output operation. According to the Texas Instruments TLV2374 product page, the device is a general-purpose low-power operational amplifier in a 14-pin SOIC package. These values position it between ultra-low-power amplifiers and higher-bandwidth signal-chain devices.
Is TLV2374ID pin-to-pin compatible with TLV2374IDR?
The TLV2374IDR is the tape-and-reel ordering form of the TLV2374 device and retains the same 14-pin SOIC electrical configuration and core parameters. According to Texas Instruments ordering information reflected in the product listings, the principal difference is the shipping format rather than the circuit function. The suffix change therefore does not represent an engineering alternative with different electrical performance, and it should be treated as the same device in a different delivery format.
What is the best drop-in replacement for TLV2374ID?
The closest confirmed pin-compatible replacement is the TLV2374IDR, which uses the same Texas Instruments TLV2374 circuit in the same 14-pin SOIC package and differs mainly in tape-and-reel shipping format. No other cross-manufacturer drop-in replacement can be confirmed from the available cross-reference information. Before substitution, compare the complete datasheet characteristics, including shutdown behavior, offset voltage, noise, output drive, and operating-temperature limits.
What can replace TLV2374ID?
TLV2374IDR can replace TLV2374ID when the board accepts the same 14-pin SOIC footprint and the required temperature, accuracy, shutdown, and output-drive characteristics remain unchanged. It is a packaging form of the same TLV2374 device rather than a different amplifier. For a functionally similar but not proven pin-to-pin substitute, use the manufacturer cross-reference and compare every electrical limit before releasing a new PCB.
Where can I download the TLV2374ID datasheet PDF?
The official TLV2374 datasheet and ordering information are accessible from the Texas Instruments product page at https://www.ti.com/product/TLV2374. Select the data-sheet document from the product resources to obtain the manufacturer PDF. Use that document for the definitive pin descriptions, recommended operating conditions, electrical characteristics, package drawings, and application guidance for the TLV2374ID ordering option.
Where can I find the TLV2374ID pinout?
The TLV2374ID pinout is published in the pin configuration section of the Texas Instruments TLV2374 manufacturer datasheet. The TLV2374ID is specified in a 14-pin SOIC package, but individual pin names and no-connect details are not stated in the product listing used for this page. Use the pin-description table and package drawing in the manufacturer datasheet when assigning PCB tracks or verifying a replacement.
Is TLV2374ID suitable for battery-powered sensor interfaces?
The TLV2374ID is suitable for many battery-powered sensor interfaces because it combines 550 uA of supply current per channel with a 2.7 V minimum supply voltage. Its 3 MHz gain-bandwidth product provides more signal bandwidth than typical micropower op amps. For an always-on design, confirm the complete system quiescent current, sensor excitation requirements, output-swing limits, and accuracy over the intended temperature range.
TLV2374ID vs TLV2375ID: which is better for low-power signal conditioning?
The TLV2374ID is confirmed as a quad, 16 V, 3 MHz, 550 uA-per-channel rail-to-rail operational amplifier in a 14-pin SOIC package. The available comparison listing identifies TLV2375ID as a related device but does not provide enough verified electrical or pinout data to establish drop-in compatibility. Choose TLV2374ID when its confirmed four-channel configuration and 14-pin SOIC footprint match the PCB; otherwise compare the two manufacturer datasheets before selecting TLV2375ID.
When should I choose TLV2374ID over another quad op amp?
Choose TLV2374ID when a design needs four amplifiers, rail-to-rail input and output operation, a 3 MHz gain-bandwidth product, and approximately 550 uA per channel in a 14-pin SOIC package. It is a balanced choice for compact low-power instrumentation rather than an ultra-low-power micropower amplifier or a high-speed precision amplifier. Verify settling behavior, noise, offset, output-current capability, and stability with the intended feedback network.
Is TLV2374ID suitable for audio applications?
The TLV2374ID can be used for low-level audio signal conditioning because it provides rail-to-rail input and output operation, a 3 MHz gain-bandwidth product, and low 550 uA per-channel current. Its 14-pin SOIC package also allows four amplifiers to serve multiple audio channels. The device is intended for general-purpose instrumentation rather than a dedicated high-fidelity audio amplifier, so verify noise, distortion, output swing, and load capability against the audio requirements.
How should the TLV2374ID be bypassed on a PCB?
Place the supply-bypass capacitor close to the amplifier's supply pins and connect it through a short, low-inductance path to the ground plane. Keep sensitive input traces away from switching converters, motor-control nodes, and other high-current paths. Because the TLV2374ID supports a 2.7 V to 16 V supply range, confirm capacitor voltage rating and stability across the complete range. The manufacturer datasheet's layout and application guidance should govern final placement.
Where to buy TLV2374ID online?
Use the Request a Quote form on this page to request TLV2374ID availability, current commercial terms, and the correct delivery option. The manufacturer identifies TLV2374ID as a standard 14-pin SOIC ordering configuration, and the available listings distinguish the tube form from the tape-and-reel form. Confirm the required suffix, quantity, and operating-temperature marking when submitting the request.
What is the price and lead time of TLV2374ID?
Current TLV2374ID price and lead time are obtained through the Request a Quote form on this page. The TLV2374ID and TLV2374IDR are both listed as standard 14-pin SOIC configurations, but inventory, minimum order quantity, and delivery timing can change by ordering suffix. Include the target quantity, package form, and production schedule in the request so the commercial response reflects the actual build requirements.

Справочные инженерные данные для TLV2374ID — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose TLV2374ID when the PCB requires a Texas Instruments quad, 16 V, 3 MHz rail-to-rail operational amplifier with 550 uA per channel in a 14-pin SOIC package. It is well matched to portable instrumentation, industrial sensor interfaces, low-voltage control blocks, and general-purpose active filtering. TLV2374IDR is appropriate when automated assembly requires tape-and-reel presentation; it retains the same electrical configuration and footprint, so it is a direct procurement alternative rather than a different design choice. TLV2374IDG4 is similarly useful when the green-roHS-compliant ordering designation is required. For applications requiring lower noise, greater output current, wider input range, faster settling, or different shutdown behavior, compare the full manufacturer electrical tables rather than relying only on the shared package. Because these alternatives are ordering forms of the same circuit, the final decision should focus on availability, delivery format, and required qualification markings rather than electrical trade-offs.

Сравнение с аналогами

Параметр Этот товар TLV2374IDR TLV2374IDG4
Package 14-SOIC 14-SOIC 14-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments
Number of Channels 4 channels 4 channels 4 channels
Maximum Supply Voltage 16 V 16 V 16 V
Minimum Operating Supply Voltage 2.7 V 2.7 V 2.7 V
Gain-Bandwidth Product 3 MHz 3 MHz 3 MHz
Supply Current per Channel 550 uA 550 uA 550 uA
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail
Shipping Format Tube ordering form Tape and reel Green-roHS-compliant ordering designation

Ключевые отличия

  • Four-channel integration in a 14-pin SOIC package (против TLV2374IDR)
  • Low-power operation with useful bandwidth (против TLV2374IDR)
  • Rail-to-rail signal-path capability (против TLV2374IDG4)

Заметки по проектированию

Place the supply-bypass capacitor immediately adjacent to the amplifier supply pins and connect it to the ground plane through a short, low-inductance path. Keep the sensitive input and feedback nodes compact, and route them away from switching-node copper, motor-drive outputs, and high-current return paths. Because the TLV2374ID can operate from 2.7 V to 16 V, select a capacitor voltage rating with suitable margin and verify its effective behavior across the complete supply range.

Do not assume that rail-to-rail input and output operation eliminates all headroom or stability constraints. Output current, load capacitance, output impedance, gain, and the selected feedback network still affect usable voltage swing and loop stability. Check the TLV2374 electrical-characteristics tables for the exact load and supply conditions, and include an isolation resistor when driving a capacitive load or long PCB trace.

Use the manufacturer's 14-pin SOIC pin description when assigning signals, and maintain a consistent ground reference for all four channels. Separate each channel's input routing from the power pins where practical, and avoid sharing narrow copper paths between high-impedance sensor inputs and amplifier outputs. Verify the assembled board for unintended coupling, especially when a switching converter, relay, or display interface is located near the quad analog package.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance status was not explicitly stated in the manufacturer product-page result or distributor snippets. The automotive-grade TLV2374-Q1 is a separate product family and must not be treated as qualification for the standard TLV2374ID.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

TLV2374ID datasheet TLV2374ID pinout TLV2374ID datasheet pdf TLV2374ID equivalent TLV2374ID replacement TLV2374ID cross reference TLV2374ID vs TLV2374IDR TLV2374ID price TLV2374ID stock Texas Instruments TLV2374ID TLV2374 16V 3MHz op amp TLV2374ID 14-SOIC footprint

Связанные компоненты & термины

Texas Instruments TLV2374ID TLV2374IDR TLV2374IDG4 TLV2374 operational amplifier quad operational amplifier voltage-feedback amplifier analog signal chain rail-to-rail input rail-to-rail output RRIO 3 MHz gain-bandwidth product 550 uA supply current 16 V maximum supply voltage 2.7 V minimum operating voltage 14-SOIC SOIC family surface-mount package sensor conditioning active filter industrial instrumentation battery-powered electronics RoHS REACH
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ