TPS53632 - 3-2-1 Phase D-CAP+ Step-Down Controller | TI
Артикул: TPS53632 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.8 | $6,80 |
| 10 | $6.15 | $61,50 |
| 100 | $5.55 | $555,00 |
| 500 | $5.05 | $2.525,00 |
| 1.000 | $4.6 | $4.600,00 |
TPS53632 Обзор
A step-down (buck) controller is a switching DC-DC converter that regulates a lower output voltage from a higher input rail. Within the power management IC hierarchy, the TPS53632 sits in the voltage regulator > DC-DC converter > multiphase controller family. Its flexible 3-2-1 phase configuration lets designers scale output current while balancing efficiency and thermal performance, and dynamic phase add/drop optimizes light-load efficiency.
Key features include the D-CAP+ control architecture, which delivers fast transient response, lowest output capacitance, and high efficiency. The standard I2C Rev 3.0 serial interface enables dynamic output voltage control (dynamic voltage scaling) and current-monitor telemetry for advanced power management. Integrated protection includes overcurrent, overvoltage, and thermal shutdown, supporting robust operation in computing environments.
Technically, the driverless architecture pairs the controller with external smart power stages or discrete MOSFETs, giving designers flexibility in current rating and cost. Telemetry via I2C enables real-time load-current reporting, useful for server power capping and health monitoring. Typical applications include server and datacenter VRM power supplies, networking and telecom equipment, storage systems, and high-performance computing core rails (for example, 12V or 5V input down to processor, FPGA, and ASIC core voltages).
When designing with the TPS53632, prioritize a clean power-stage layout: keep high-current switching loops short, place decoupling close to the pins, and provide generous copper area for thermal relief. The I2C bus needs pull-up resistors and correct address pin configuration. Pricing varies by distributor, with LCSC listing TPS53632RSMR from about $6.27 as of 2026-08-29.
Аналоги без доработки для TPS53632 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с TPS53632 (тот же форм-фактор и посадочное место) — отличается по Control Architecture, Package, Topology.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
TPS53624
⚡ Тот же корпус ⚠️ Характеристики не проверены✓ В наличии
$1.86 / шт.
Открыть даташит →TPS53622RSBT
⚡ Тот же корпус✓ В наличии
$3.96 / шт.
Открыть даташит →TPS53315
⚡ Тот же корпус ⚠️ Характеристики не проверены✓ В наличии
$3.52 / шт.
Открыть даташит →TPS53679
⚡ Тот же корпус ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
TPS53632 Максимальные параметры и электрические характеристики
| Топология | Step-Down (Buck), Multiphase Controller |
| Phase Configuration | 3-2-1 Phase |
| Control Architecture | D-CAP+ |
| Driver Type | Driverless (external power stages) |
| Control Interface | I2C Rev 3.0 |
| Telemetry | Current monitor, dynamic output voltage control |
| Dynamic Phase Add/Drop | Yes |
| Output Current Rating (per Mouser) | 59 A |
| Корпус | 32-VQFN (4x4 mm) RSM |
| Тип монтажа | Surface Mount |
| Protection Features | Overcurrent, Overvoltage, Thermal Shutdown |
| Статус RoHS | Compliant (TPS53632GRSMT variant) |
Руководство по цоколевке TPS53632 в корпусе 32-vqfn (4x4 mm) rsm
Цоколевка для TPS53632 (корпус 32-vqfn (4x4 mm) rsm). Этот силовой прибор имеет выводы затвора, стока и истока. Для неполяризованных корпусов обратитесь к техническому описанию производителя для точной ориентации вывода 1 и деталей посадочного места. Типичные применения включают проектирование источников питания, управление двигателями и коммутацию нагрузки.
Нет подробных данных о распиновке для TPS53632.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
TPS53632 подходит для 6 применениеs: Server and Datacenter VRM, Networking Equipment, High-Performance Computing / ASIC Core Power, Storage Systems, Telecom Power, Industrial Computing.
Server and Datacenter VRM
Server core rails demand multi-hundred-amp delivery with sub-millisecond transient response. The TPS53632 fits this role with its 3-2-1 phase configuration, D-CAP+ control delivering fast transient response with lowest output capacitance, and a 59 A current-class rating per Mouser data. Placed on a 12V intermediate bus feeding processor core voltage via external power stages, its I2C Rev 3.0 telemetry enables current monitoring for server power capping and predictive maintenance. Dynamic phase add/drop maintains efficiency from idle to full load, a key datacenter TCO factor.
Рекомендуется
Networking Equipment
Switch, router, and baseband line cards require high-current point-of-load conversion with tight board space. The TPS53632's 32-VQFN 4x4 mm footprint and driverless architecture (external smart power stages) allow compact, scalable VRM designs. D-CAP+ control reduces required output capacitance, cutting BOM cost and height - important for 1U platforms. I2C-based dynamic voltage scaling lets system firmware optimize silicon voltage margins across operating conditions, improving energy efficiency of always-on network infrastructure hardware.
Рекомендуется
High-Performance Computing / ASIC Core Power
FPGA and ASIC core rails need precision, telemetry-monitored power with dynamic voltage scaling for performance-power optimization. The TPS53632 provides dynamic output voltage control through its I2C Rev 3.0 interface, allowing firmware to tune core voltage in real time for DVFS schemes. The D-CAP+ architecture responds to the aggressive load steps typical of accelerator silicon, while the 3-2-1 phase structure scales current capability. Current-monitor telemetry feeds health-monitoring software in compute clusters.
Рекомендуется
Storage Systems
Enterprise SSD and storage controller boards use compact high-efficiency point-of-load converters for ASIC and processor cores. The TPS53632's driverless design lets designers pair it with integrated power stages matched to the exact current need, minimizing solution size on dense storage blades. Thermal shutdown and overcurrent/overvoltage protection safeguard valuable storage silicon. Dynamic phase drop maximizes light-load efficiency during idle periods, reducing cooling load in dense storage enclosures.
Рекомендуется
Telecom Power
Telecom line cards running from -48V-derived 12V intermediate buses use the TPS53632 for high-current step-down to DSP and ASIC core voltages. The D-CAP+ architecture provides high efficiency across the wide load ranges typical of telecom traffic patterns, while dynamic phase add/drop sheds phases at light load. The 32-VQFN 4x4 mm package suits constrained card layouts, and I2C telemetry supports remote fault diagnostics essential in unattended telecom sites.
Рекомендуется
Industrial Computing
Industrial PCs, edge controllers, and embedded compute modules use the TPS53632 to generate core voltages from 12V or 5V rails. Integrated protection (overcurrent, overvoltage, thermal shutdown) supports the reliability demands of factory-floor environments, and the wide temperature capability suits industrial enclosures. I2C control allows system-level power management in fanless designs where every watt of efficiency reduces thermal stress and extends product lifetime.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для TPS53632 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | TPS53624 | TPS53622RSBT | TPS53315 |
|---|---|---|---|---|
| Package | 32-VQFN (4x4 mm) RSM | VQFN-32 | VQFN-32 (RSB) | VQFN-32 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Control Architecture | D-CAP+ | D-CAP+ | D-CAP+ | D-CAP+ |
| Driverless | Yes | Yes | Yes | Yes |
| Drop-in Pin Compatibility | Reference | Not confirmed - verify pinout | No - different package code (RSB) | Not confirmed - verify pinout |
Ключевые отличия
- Driverless multiphase architecture (против TPS53315)
- Full I2C Rev 3.0 telemetry (против TPS53315)
- Flexible 3-2-1 phase configuration (против TPS53622RSBT)
Заметки по проектированию
Keep the switching loops between controller, power stages, and output inductors as short as possible. Place current-sense elements per TI datasheet recommendations and route the D-CAP+ feedback lines away from switch nodes. A poor power-stage layout degrades the fast transient response advantage of D-CAP+ and can cause jitter or instability at multiphase operation.
Provide solid ground plane and generous copper pour under the 32-VQFN (4x4 mm) thermal pad, with an array of thermal vias to inner layers. Use 10uF-class ceramic decoupling close to VDD and bias pins. The I2C bus requires pull-up resistors sized per bus capacitance, and the device address pins must be strapped correctly per the datasheet configuration table.
At 59 A-class output currents, losses are dominated by the external power stages, but controller thermal margin still matters for reliability. Verify junction temperature with TI's thermal design procedure using worst-case VIN, load, and ambient. Provide airflow or heatsinking at high continuous loads, especially in enclosed server chassis.
Do not confuse TPS53632 with TPS53632G - the G variant is a 48-V half-bridge PWM controller for GaN stages, not a buck multiphase controller. Also confirm ordering suffix (RSMR vs GRSMT) for RoHS documentation, and verify firmware/I2C configuration files match the device before reuse across platforms.
Информация о соответствии
TPS53632GRSMT variant is listed as RoHS-compliant on DigiKey. REACH, halogen-free, and conflict-minerals status not stated in provided data - confirm on TI product page.
