TPS53632 - 3-2-1 Phase D-CAP+ Step-Down Controller | TI
部品番号: TPS53632 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $6.8 | $6.80 |
| 10 | $6.15 | $61.50 |
| 100 | $5.55 | $555.00 |
| 500 | $5.05 | $2,525.00 |
| 1,000 | $4.6 | $4,600.00 |
TPS53632 概要
A step-down (buck) controller is a switching DC-DC converter that regulates a lower output voltage from a higher input rail. Within the power management IC hierarchy, the TPS53632 sits in the voltage regulator > DC-DC converter > multiphase controller family. Its flexible 3-2-1 phase configuration lets designers scale output current while balancing efficiency and thermal performance, and dynamic phase add/drop optimizes light-load efficiency.
Key features include the D-CAP+ control architecture, which delivers fast transient response, lowest output capacitance, and high efficiency. The standard I2C Rev 3.0 serial interface enables dynamic output voltage control (dynamic voltage scaling) and current-monitor telemetry for advanced power management. Integrated protection includes overcurrent, overvoltage, and thermal shutdown, supporting robust operation in computing environments.
Technically, the driverless architecture pairs the controller with external smart power stages or discrete MOSFETs, giving designers flexibility in current rating and cost. Telemetry via I2C enables real-time load-current reporting, useful for server power capping and health monitoring. Typical applications include server and datacenter VRM power supplies, networking and telecom equipment, storage systems, and high-performance computing core rails (for example, 12V or 5V input down to processor, FPGA, and ASIC core voltages).
When designing with the TPS53632, prioritize a clean power-stage layout: keep high-current switching loops short, place decoupling close to the pins, and provide generous copper area for thermal relief. The I2C bus needs pull-up resistors and correct address pin configuration. Pricing varies by distributor, with LCSC listing TPS53632RSMR from about $6.27 as of 2026-08-29.
ドロップイン代替品: TPS53632 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TPS53632 （同一形状・フットプリント） — 相違点: Control Architecture, Package, Topology.
クイック比較ツール — 並列比較する代替部品を選択:
TPS53624
⚡ 同一パッケージ ⚠️ 仕様未検証✓ 在庫あり
$1.86 / 個
データシートを見る →TPS53622RSBT
⚡ 同一パッケージ✓ 在庫あり
$3.96 / 個
データシートを見る →TPS53315
⚡ 同一パッケージ ⚠️ 仕様未検証✓ 在庫あり
$3.52 / 個
データシートを見る →TPS53679
⚡ 同一パッケージ ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TPS53632 最大定格＆電気的特性
| トポロジー | Step-Down (Buck), Multiphase Controller |
| Phase Configuration | 3-2-1 Phase |
| Control Architecture | D-CAP+ |
| Driver Type | Driverless (external power stages) |
| Control Interface | I2C Rev 3.0 |
| Telemetry | Current monitor, dynamic output voltage control |
| Dynamic Phase Add/Drop | Yes |
| Output Current Rating (per Mouser) | 59 A |
| パッケージ | 32-VQFN (4x4 mm) RSM |
| 実装タイプ | Surface Mount |
| Protection Features | Overcurrent, Overvoltage, Thermal Shutdown |
| RoHS ステータス | Compliant (TPS53632GRSMT variant) |
TPS53632 32-vqfn (4x4 mm) rsm ピン配置ガイド
TPS53632 (32-vqfn (4x4 mm) rsm パッケージ) のピン配置。 このパワーデバイスは、ゲート、ドレイン、ソース端子を備えています。非極性パッケージの場合、正確なピン1の向きとフットプリントの詳細については、メーカーのデータシートを参照してください。主な用途には、電源設計、モータ駆動、負荷スイッチングがあります。
詳細なピン配置データはありません: TPS53632.
詳細は データシート をご参照ください。
主な用途
TPS53632 の用途: 6 件s: Server and Datacenter VRM, Networking Equipment, High-Performance Computing / ASIC Core Power, Storage Systems, Telecom Power, Industrial Computing.
Server and Datacenter VRM
Server core rails demand multi-hundred-amp delivery with sub-millisecond transient response. The TPS53632 fits this role with its 3-2-1 phase configuration, D-CAP+ control delivering fast transient response with lowest output capacitance, and a 59 A current-class rating per Mouser data. Placed on a 12V intermediate bus feeding processor core voltage via external power stages, its I2C Rev 3.0 telemetry enables current monitoring for server power capping and predictive maintenance. Dynamic phase add/drop maintains efficiency from idle to full load, a key datacenter TCO factor.
おすすめ
Networking Equipment
Switch, router, and baseband line cards require high-current point-of-load conversion with tight board space. The TPS53632's 32-VQFN 4x4 mm footprint and driverless architecture (external smart power stages) allow compact, scalable VRM designs. D-CAP+ control reduces required output capacitance, cutting BOM cost and height - important for 1U platforms. I2C-based dynamic voltage scaling lets system firmware optimize silicon voltage margins across operating conditions, improving energy efficiency of always-on network infrastructure hardware.
おすすめ
High-Performance Computing / ASIC Core Power
FPGA and ASIC core rails need precision, telemetry-monitored power with dynamic voltage scaling for performance-power optimization. The TPS53632 provides dynamic output voltage control through its I2C Rev 3.0 interface, allowing firmware to tune core voltage in real time for DVFS schemes. The D-CAP+ architecture responds to the aggressive load steps typical of accelerator silicon, while the 3-2-1 phase structure scales current capability. Current-monitor telemetry feeds health-monitoring software in compute clusters.
おすすめ
Storage Systems
Enterprise SSD and storage controller boards use compact high-efficiency point-of-load converters for ASIC and processor cores. The TPS53632's driverless design lets designers pair it with integrated power stages matched to the exact current need, minimizing solution size on dense storage blades. Thermal shutdown and overcurrent/overvoltage protection safeguard valuable storage silicon. Dynamic phase drop maximizes light-load efficiency during idle periods, reducing cooling load in dense storage enclosures.
おすすめ
Telecom Power
Telecom line cards running from -48V-derived 12V intermediate buses use the TPS53632 for high-current step-down to DSP and ASIC core voltages. The D-CAP+ architecture provides high efficiency across the wide load ranges typical of telecom traffic patterns, while dynamic phase add/drop sheds phases at light load. The 32-VQFN 4x4 mm package suits constrained card layouts, and I2C telemetry supports remote fault diagnostics essential in unattended telecom sites.
おすすめ
Industrial Computing
Industrial PCs, edge controllers, and embedded compute modules use the TPS53632 to generate core voltages from 12V or 5V rails. Integrated protection (overcurrent, overvoltage, thermal shutdown) supports the reliability demands of factory-floor environments, and the wide temperature capability suits industrial enclosures. I2C control allows system-level power management in fanless designs where every watt of efficiency reduces thermal stress and extends product lifetime.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TPS53632 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TPS53624 | TPS53622RSBT | TPS53315 |
|---|---|---|---|---|
| Package | 32-VQFN (4x4 mm) RSM | VQFN-32 | VQFN-32 (RSB) | VQFN-32 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Control Architecture | D-CAP+ | D-CAP+ | D-CAP+ | D-CAP+ |
| Driverless | Yes | Yes | Yes | Yes |
| Drop-in Pin Compatibility | Reference | Not confirmed - verify pinout | No - different package code (RSB) | Not confirmed - verify pinout |
主な差別化要因
- Driverless multiphase architecture （vs TPS53315)
- Full I2C Rev 3.0 telemetry （vs TPS53315)
- Flexible 3-2-1 phase configuration （vs TPS53622RSBT)
設計ノート
Keep the switching loops between controller, power stages, and output inductors as short as possible. Place current-sense elements per TI datasheet recommendations and route the D-CAP+ feedback lines away from switch nodes. A poor power-stage layout degrades the fast transient response advantage of D-CAP+ and can cause jitter or instability at multiphase operation.
Provide solid ground plane and generous copper pour under the 32-VQFN (4x4 mm) thermal pad, with an array of thermal vias to inner layers. Use 10uF-class ceramic decoupling close to VDD and bias pins. The I2C bus requires pull-up resistors sized per bus capacitance, and the device address pins must be strapped correctly per the datasheet configuration table.
At 59 A-class output currents, losses are dominated by the external power stages, but controller thermal margin still matters for reliability. Verify junction temperature with TI's thermal design procedure using worst-case VIN, load, and ambient. Provide airflow or heatsinking at high continuous loads, especially in enclosed server chassis.
Do not confuse TPS53632 with TPS53632G - the G variant is a 48-V half-bridge PWM controller for GaN stages, not a buck multiphase controller. Also confirm ordering suffix (RSMR vs GRSMT) for RoHS documentation, and verify firmware/I2C configuration files match the device before reuse across platforms.
コンプライアンス情報
TPS53632GRSMT variant is listed as RoHS-compliant on DigiKey. REACH, halogen-free, and conflict-minerals status not stated in provided data - confirm on TI product page.
