TPS543C20RVFR - 40A 14V Sync Step-Down SWIFT Converter | TI
Артикул: TPS543C20RVFR ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.85 | $6,85 |
| 10 | $6.17 | $61,70 |
| 100 | $5.48 | $548,00 |
| 500 | $4.93 | $2.465,00 |
| 1.000 | $4.38 | $4.380,00 |
TPS543C20RVFR Обзор
A buck (step-down) DC-DC switching regulator is a power-management integrated circuit that converts a higher DC input voltage into a lower DC output voltage by rapidly switching an internal MOSFET pair and smoothing the resulting pulsed waveform with an LC output filter. Within the broader power-electronics taxonomy, the TPS543C20 sits in the non-isolated POL (point-of-load) converter family -> DC-DC switching regulator -> voltage regulator -> power-management IC hierarchy. SWIFT converters from TI combine internal MOSFETs, current-mode control, and adaptive compensation to deliver high efficiency at multi-MHz switching frequencies in compact surface-mount footprints.
Key features include integrated 3 mΩ/0.9 mΩ stacked NexFET power stages, differential remote sensing for tight load-point regulation, monolithic integration that eliminates external compensation components, and a stackable architecture that lets two devices operate in parallel for up to 80 A. Internally compensated emulated peak current-mode control provides a wide bandwidth loop, and the switching frequency is synchronizable to an external clock for EMI-sensitive rails. A built-in integrator and ramp-tracking amplifier allow stable operation across the full 0.6 V to 5.5 V output range.
The TPS543C20 architecture uses internal MOSFETs driven by an emulated peak current-mode controller with a clock-synchronizable, fixed-frequency modulator. The internal integrator and directly amplifying ramp tracking loop eliminate the need for external compensation across the wide operating range, simplifying PCB layout and shrinking the BOM. Differential sensing cancels PCB IR-drop in high-current paths, allowing the regulated voltage at the load to remain within ±1% tolerance even at 40 A.
Typical applications include space-constrained point-of-load rails in networking switches and routers, FPGA/ASIC core and transceiver supplies, server and storage POLs, and stacked 80 A configurations for high-current ASIC and processor rails. The 40-pin PowerLFQFN package exposes the die through a thermal pad, allowing multi-layer PCB copper pours to dissipate the heat generated at full load.
When designing with the TPS543C20, observe the datasheet-required minimum input/output capacitor values (including ripple-current-rated ceramics) and keep the SYNC/FSEL loop short to the IC. Differential remote-sense traces must be routed as a matched pair directly to the load to suppress PCB IR-drop in high-current applications.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Аналоги без доработки для TPS543C20RVFR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с TPS543C20RVFR (тот же форм-фактор и посадочное место) — отличается по Clock Synchronization, Control Mode, Input Voltage Range, Output Voltage Range, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
TPS543C20ARVFR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TPS543C20RVFT
✅ Прямая замена✓ В наличии
$7.1 / шт.
Открыть даташит →TPS543C20ARVFT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
TPS543B20RVFR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
TPS543C20RVFR
✅ Прямая замена✓ В наличии
$4.38 / шт.
Открыть даташит →TPS543C20RVFR Максимальные параметры и электрические характеристики
| Топология | Synchronous Buck (Step-Down) |
| Диапазон входного напряжения | 4 V to 14 V (A-version: 4 V to 16 V) |
| Диапазон выходного напряжения | 0.6 V to 5.5 V |
| Максимальный выходной ток | 40 A continuous |
| Control Mode | Emulated Peak Current Mode |
| Internal MOSFETs (High-Side / Low-Side) | 3 mΩ / 0.9 mΩ stacked NexFET |
| Тип выхода | Adjustable (resistor divider) |
| Remote Sensing | Differential (true remote sense) |
| Clock Synchronization | Yes (SYNC input) |
| Compensation | Adaptive Internal (no external comp network) |
| Корпус | 40-Pin PowerLFQFN (RVF) with exposed thermal pad |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40C to +125C junction |
| Статус RoHS | Compliant |
Конфигурация выводов TPS543C20RVFR
| Контакт 1 | VIN — Input voltage supply |
| Контакт 2 | VIN — Input voltage supply |
| Контакт 3 | PGND — Power ground |
| Контакт 4 | SW — Switching node |
| Контакт 5 | SW — Switching node |
| Контакт 6 | SW — Switching node |
| Контакт 7 | SW — Switching node |
| Контакт 8 | PGND — Power ground |
| Контакт 9 | BOOT — Bootstrap capacitor for high-side gate drive |
| Контакт 10 | VOUT — Output voltage sense |
| Контакт 11 | VOUT — Output voltage sense |
| Контакт 12 | PGND — Power ground |
| Контакт 13 | PGND — Power ground |
| Контакт 14 | PGND — Power ground |
| Контакт 15 | PGND — Power ground |
| Контакт 16 | AGND — Analog ground |
| Контакт 17 | DIFF+ — Differential remote sense positive |
| Контакт 18 | DIFF- — Differential remote sense negative |
| Контакт 19 | FBK — Feedback input |
| Контакт 20 | REF — Reference voltage output |
| Контакт 21 | EN — Enable input |
| Контакт 22 | PGOOD — Power-good indicator output |
| Контакт 23 | SYNC — External clock synchronization input |
| Контакт 24 | FSEL — Frequency select resistor input |
| Контакт 25 | MODE — Mode selection (stack primary/secondary) |
| Контакт 26 | PWM/STACK — PWM output / stack interface |
| Контакт 27 | TRK — Tracking input |
| Контакт 28 | SS — Soft-start capacitor |
| Контакт 29 | COMP — Compensation node (internal) |
| Контакт 30 | AVIN — Analog input supply |
| Контакт 31 | PGND — Power ground |
| Контакт 32 | PGND — Power ground |
| Контакт 33 | PGND — Power ground |
| Контакт 34 | PGND — Power ground |
| Контакт 35 | VIN — Input voltage supply |
| Контакт 36 | VIN — Input voltage supply |
| Контакт 37 | VIN — Input voltage supply |
| Контакт 38 | VIN — Input voltage supply |
| Контакт 39 | VIN — Input voltage supply |
| Контакт 40 | NC — Not connected (per datasheet) |
| Контакт EP | PGND_PAD — Exposed thermal pad - power ground |
Типичное применение
TPS543C20RVFR подходит для 6 применениеs: FPGA Core and Transceiver POL Supply, Networking Switch and Router ASIC Rails, Server and Storage Point-of-Load Conversion, Stacked 80 A High-Current ASIC Rail, Industrial 24 V to 5 V / 3.3 V Conversion, PCIe Card Auxiliary Power Rails.
FPGA Core and Transceiver POL Supply
The TPS543C20RVFR delivers 0.85 V to 1.8 V rails at up to 40 A directly to high-performance FPGAs (Xilinx Versal, Intel Stratix, etc.). Its 0.6 V to 5.5 V adjustable output covers every common FPGA core and transceiver voltage. Differential remote sensing maintains ±1% regulation at the load by canceling PCB IR-drop in the 40 A power path. Adaptive internal compensation eliminates the comp network that typically clutters dense FPGA power trees, shrinking the POL footprint.
Рекомендуется
Networking Switch and Router ASIC Rails
Routers and top-of-rack switches require multiple 40 A to 80 A rails for switch ASICs and packet processors. The TPS543C20RVFR handles one rail at 40 A, and two devices stack for 80 A on the most demanding ASIC rails. The SYNC input lets multiple TPS543C20 phases lock to a single clock, eliminating beat-frequency noise in dense multi-rail enclosures. The 4 V to 14 V input accepts standard 12 V backplane/connector power directly.
Рекомендуется
Server and Storage Point-of-Load Conversion
Inside hyperscale servers, 12 V main bus power is stepped down at the motherboard to 0.6 V to 3.3 V for CPUs, DDR5, and accelerators. The TPS543C20RVFR fits this POL slot with 95% peak efficiency, programmable frequency, and remote sensing. The 40-pin PowerLFQFN footprint allows high-density placement next to memory DIMMs and M.2 SSDs. Stackable architecture scales to 80 A for accelerator cards without paralleling external MOSFETs.
Рекомендуется
Stacked 80 A High-Current ASIC Rail
Two TPS543C20RVFR devices in a primary-secondary stack deliver 80 A continuous to a single high-current ASIC rail, per the TI reference design. Internal current-sharing loop balances load automatically without external circuitry. This eliminates discrete parallel-FET designs that require complex current-matching networks. Differential sensing on both phases keeps the load-point regulation within ±1% even with 80 A of PCB IR-drop.
Рекомендуется
Industrial 24 V to 5 V / 3.3 V Conversion
The TPS543C20A revision (4 V to 16 V input) tolerates industrial 24 V rails when paired with a TVS/clamp pre-protector. Its 40 A capability drives motor-control, PLC logic, and industrial Ethernet PHYs at 5 V or 3.3 V. The exposed thermal pad of the PowerLFQFN package couples directly to PCB copper for fan-less cooling in sealed enclosures. Differential sensing compensates for long harness drops in distributed control cabinets.
Рекомендуется
PCIe Card Auxiliary Power Rails
PCIe accelerator cards draw auxiliary 12 V from the edge connector and step down to 0.8 V to 1.2 V for the local ASIC. The TPS543C20RVFR fits this application with 40 A capability, 12 V input direct from the slot, and a compact 40-pin PowerLFQFN footprint that fits inside tight add-in-card height envelopes. Programmable soft-start lets the card meet PCIe hot-plug inrush limits without extra hot-swap controllers.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для TPS543C20RVFR — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | TPS543C20ARVFR | TPS543C20RVFT | TPS543C20ARVFT | TPS543B20RVFR |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 40-Pin PowerLFQFN (RVF) | 40-Pin PowerLFQFN (RVF) - same | 40-Pin PowerLFQFN (RVF) - same | 40-Pin PowerLFQFN (RVF) - same | 40-Pin PowerLFQFN (RVF) - same |
| Input Voltage Range | 4 V to 14 V | 4 V to 16 V | 4 V to 14 V | 4 V to 16 V | 4 V to 14 V |
| AEC-Q100 Automotive Qualified | No | No | No | No | No |
| RoHS / Lead-Free | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes |
Ключевые отличия
- Highest power density in 40-pin PowerLFQFN at 40 A (против TPS543B20RVFR)
- Wider input voltage range with the A-version (против TPS543C20RVFR (standard))
- True stackable architecture for 80 A (против TPS543C20RVFT (single phase))
Заметки по проектированию
Estimated: At VIN=12V, VOUT=1.0V, 40A load, the TPS543C20RVFR dissipates approximately 12 V x 40 A x (1 - 0.95) = 24 W (assuming 95% efficiency). The 40-pin PowerLFQFN package couples this heat through its exposed thermal pad to PCB copper. Per TI TPS543C20 datasheet, designers should use a minimum 6-layer board with at least 1 oz copper on inner layers and a 2 oz top layer to keep junction temperature below 125C. A thermal pad land with at least 25 thermal vias into the inner copper pour is mandatory.
Differential remote sense traces (DIFF+ and DIFF-) must be routed as a matched-length, tightly-coupled pair directly from the IC pins to the load sense points, per TI TPS543C20 datasheet layout guidelines. This cancels common-mode noise from the switching node and prevents ground loops. Place the SYNC and FSEL traces away from the SW node to avoid capacitive coupling; if possible, shield them with a ground trace. Keep input/output ceramic capacitors (X7R, ripple-current rated) within 2 mm of the IC pins.
Do not exceed the absolute maximum input voltage of 18 V on the TPS543C20 (14 V version) or 20 V on the TPS543C20A (16 V version) per the TI datasheet. The TPS548D21RVFT is NOT pin-compatible with the TPS543C20 - per the TI E2E forum, switching between them requires redesign of both schematic and PCB layout. When stacking two devices for 80 A, follow the TI TPS543C20 reference design exactly to ensure the primary/secondary current-sharing loop remains stable across all load steps.
Keep the SW (switching) node copper area small to minimize radiated EMI. Use a shielded inductor (semi-toroidal) at the output rather than an open drum core to reduce near-field emissions. The exposed thermal pad (EP) must be soldered to a sufficiently large copper pour (per datasheet minimum) to keep thermal resistance within the spec. Star-ground the analog GND (AGND) returns into the PGND at a single point to avoid ground bounce corrupting the feedback loop.
Информация о соответствии
RoHS compliant and lead-free per TI product page. Halogen-free and full material declaration available via TI MDDS download. Not AEC-Q100 qualified - for automotive designs use the TPS543C20-Q1 variants. For full SVHC REACH declaration see ti.com/product/TPS543C20.
