AD5258BRMZ100 vs AD5142ABCPZ10-RL7 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng AD5258BRMZ100 sa pamamagitan ng Analog Devices at AD5142ABCPZ10-RL7 sa pamamagitan ng Analog Devices. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
AD5258BRMZ100 - 100kΩ 64-Tap I2C Nonvolatile DigiPot | ADI
AD5258BRMZ100 ⚠ Huling PagbiliAnalog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | AD5258BRMZ100 | AD5142ABCPZ10-RL7 |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Huling Pagbili | Aktibo |
| Product Type | Digital Potentiometer (DigiPOT) | — |
| Number of Channels | 1 | — |
| Number of Taps | 64 | 256 positions |
| End-to-End Resistance | 100 kΩ | — |
| Resistance Tolerance | ±30 % | — |
| EEPROM-stored Tolerance Accuracy | 0.1 % | — |
| Interface | I²C-compatible (2-wire) | I²C-compatible (SCL up to 3 MHz) |
| Address Decode Pins | AD0 (2 pins, supports up to 4 devices on bus) | — |
| VLOGIC Range | 2.7 V to 5.5 V | — |
| Analog Supply / Terminal Voltage | 2.7 V to 5.5 V | — |
| Power-on EEPROM Refresh Time | < 1 ms | — |
| Nonvolatile Memory | Yes (wiper settings retained on power-down) | — |
| Software Write Protect | Yes (via I²C command) | — |
| Hanay ng Temperature na Operasyon | −40 °C to +125 °C | — |
| Packhaging | 10-pin MSOP (RM), 3 mm × 4.9 mm | 16-lead LFCSP (3 mm × 3 mm) with EP |
| Taper | Linear | Linear |
| Tindminan RoHS | Compliant | Compliant |
| Number of Potentiometers | — | 2 (dual) |
| Nominal End-to-End Resistance (R-AB) | — | 10 kΩ |
| Uri ng Memory | — | Non-volatile EEPROM |
| Resistor Tolerance | — | ±8% |
| Temperature Coefficient | — | 35 ppm/°C nominal |
| Wiper Resistance (ends of array) | — | 40 Ω typical |
| Continuous Current on A/B/W Pins | — | ±6 mA max |
| Supply Voltage (VDD) | — | 2.3 V to 5.5 V |
| Temperature na Operasyon | — | -40 °C to +125 °C |
| Uri ng Pagpapasok | — | Surface Mount |
| AEC-Q100 Qualification | — | Not AEC-Q100 qualified (industrial grade) |
| Soft Reset | — | Yes (loads default wiper setting) |