ISO1410DW vs ADM2461EBRWZ-RL Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ISO1410DW sa pamamagitan ng Texas Instruments at ADM2461EBRWZ-RL sa pamamagitan ng Analog Devices. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
ISO1410DW - 500Kbps 5kVrms Isolated RS-485 | Texas Instruments
ISO1410DW ✓ NakahandaAnalog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ISO1410DW | ADM2461EBRWZ-RL |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Device Type | 1/1 isolated RS-422 and RS-485 transceiver | — |
| Maximum Data Rate | 500 Kbps | 500 kbps |
| Isolation Voltage | 5 kVrms | — |
| Isolation Type | Galvanic isolation | — |
| Bus Compatibility | TIA/EIA RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | — |
| EMC Protection | EMC protected | — |
| Hanay ng Temperature na Operasyon | -40°C to +125°C | — |
| Packhaging | 16-pin wide-body SOIC (DW) | 16-SOIC_W (Wide Body, 7.5 mm creepage) |
| Uri ng Pagpapasok | Surface mount | Surface Mount |
| Number of Transceivers | 1 | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Logic-Side Supply Voltage | [DATA_NEEDED: logic-side supply voltage] | — |
| Bus-Side Supply Voltage | [DATA_NEEDED: bus-side supply voltage] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | -25 V to +25 V |
| Output Differential Voltage | [DATA_NEEDED: output differential voltage] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| ESD Protection | Bus pins endure high levels of IEC electrostatic discharge events | — |
| EFT Protection | Bus pins endure high levels of IEC electrical fast transient events | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS compliance] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Product Type | — | Isolated RS-485 / RS-422 Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half Duplex |
| Isolation Voltage (rms) | — | 5.7 kV rms |
| ESD Protection (Bus Pins) | — | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) |
| Receiver Hysteresis | — | 30 mV typical |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Supply Voltage - Logic Side (VDD1) | — | 3.0 V to 5.5 V |
| Supply Voltage - Bus Side (VDD2) | — | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) |
| Temperature na Operasyon | — | -40C to +85C |
| Level ng MSL | — | 3 |