ISO1410DW vs ADM2461EBRWZ-RL موازنہ
تفصیلی ساتھ ساتھ موازنہ از ISO1410DW بذریعہ Texas Instruments اور ADM2461EBRWZ-RL بذریعہ Analog Devices. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | ISO1410DW | ADM2461EBRWZ-RL |
|---|---|---|
| برانڈ | Texas Instruments | Analog Devices |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Device Type | 1/1 isolated RS-422 and RS-485 transceiver | — |
| Maximum Data Rate | 500 Kbps | 500 kbps |
| Isolation Voltage | 5 kVrms | — |
| Isolation Type | Galvanic isolation | — |
| Bus Compatibility | TIA/EIA RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | — |
| EMC Protection | EMC protected | — |
| آپریٹنگ درجہ حرارت رینج | -40°C to +125°C | — |
| پیکیج | 16-pin wide-body SOIC (DW) | 16-SOIC_W (Wide Body, 7.5 mm creepage) |
| ماؤنٹنگ ٹائپ | Surface mount | Surface Mount |
| Number of Transceivers | 1 | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Logic-Side Supply Voltage | [DATA_NEEDED: logic-side supply voltage] | — |
| Bus-Side Supply Voltage | [DATA_NEEDED: bus-side supply voltage] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | -25 V to +25 V |
| Output Differential Voltage | [DATA_NEEDED: output differential voltage] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| ESD Protection | Bus pins endure high levels of IEC electrostatic discharge events | — |
| EFT Protection | Bus pins endure high levels of IEC electrical fast transient events | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS compliance] | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Product Type | — | Isolated RS-485 / RS-422 Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half Duplex |
| Isolation Voltage (rms) | — | 5.7 kV rms |
| ESD Protection (Bus Pins) | — | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) |
| Receiver Hysteresis | — | 30 mV typical |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Supply Voltage - Logic Side (VDD1) | — | 3.0 V to 5.5 V |
| Supply Voltage - Bus Side (VDD2) | — | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) |
| آپریٹنگ درجہ حرارت | — | -40C to +85C |
| MSL لیول | — | 3 |