ISO1450BDWR vs THVD1450DRBR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ISO1450BDWR sa pamamagitan ng Texas Instruments at THVD1450DRBR sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ NakahandaTexas Instruments
THVD1450DRBR - 3.3-5V RS-485 Transceiver, ±18kV ESD, 50Mbps | TI
THVD1450DRBR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ISO1450BDWR | THVD1450DRBR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Fungsi | Isolated half-duplex RS-485 / RS-422 transceiver | — |
| Data Rate (max) | 50 Mbps | — |
| Isolation Voltage (rms) | 5 kVrms (reinforced) | — |
| Number of Drivers / Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis voltage] | 30 mV |
| Supply Voltage VCC1 (logic side) | 3 V to 5.5 V | — |
| Supply Voltage VCC2 (bus side) | Internally generated by isolated DC-DC | — |
| Bus Pin ESD (IEC 61000-4-2) | ±16 kV (air / contact, per datasheet) | — |
| Bus Pin ESD (HBM) | ±4 kV | — |
| IEC 61000-4-4 EFT Immunity | ±4 kV | — |
| Surge Immunity | [DATA_NEEDED: IEC 61000-4-5 surge rating] | — |
| Unit Load | 1/8 (up to 256 nodes on bus) | 1 UL (32 nodes on bus) |
| Common-Mode Range | Wide common-mode bus voltage range (per datasheet) | -7 V to +12 V |
| Thermal Shutdown | Yes | — |
| Current Limiting | Yes | — |
| Low-Power Standby | Yes | — |
| Temperature na Operasyon | -40C to +125C | -40°C to +125°C |
| Packhaging | SOIC-16 wide-body (DW), 16 pins | 8-VSON EP (DRB) 3x3 mm |
| Uri ng Pagpapasok | Surface Mount | Surface Mount, wettable flank |
| Level ng MSL | 3 (per JEDEC J-STD-020) | — |
| Tindminan RoHS | Compliant | Compliant |
| Compliance Standards | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 | — |
| Product Type | — | RS-485/RS-422 Transceiver (half-duplex) |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 3 V to 5.5 V |
| Maximum Data Rate | — | 50 Mbps |
| ESD Protection (Bus Pins) | — | ±18 kV IEC 61000-4-2 contact/air |
| EFT Immunity | — | ±4 kV IEC 61000-4-4 |
| Receiver Fail-Safe | — | Internal biasing (idle/short/open = logic high) |
| Moisture Sensitivity Level | — | MSL 1 |
| Duplex Mode | — | Half |