ISO1450BDWR vs THVD1450DRBR Karşılaştırma
Ayrıntılı yan yana karşılaştırma ISO1450BDWR tarafından Texas Instruments ve THVD1450DRBR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ AktifTexas Instruments
THVD1450DRBR - 3.3-5V RS-485 Transceiver, ±18kV ESD, 50Mbps | TI
THVD1450DRBR ✓ AktifÖzellik Karşılaştırması
| Parametre | ISO1450BDWR | THVD1450DRBR |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Fonksiyon | Isolated half-duplex RS-485 / RS-422 transceiver | — |
| Data Rate (max) | 50 Mbps | — |
| Isolation Voltage (rms) | 5 kVrms (reinforced) | — |
| Number of Drivers / Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis voltage] | 30 mV |
| Supply Voltage VCC1 (logic side) | 3 V to 5.5 V | — |
| Supply Voltage VCC2 (bus side) | Internally generated by isolated DC-DC | — |
| Bus Pin ESD (IEC 61000-4-2) | ±16 kV (air / contact, per datasheet) | — |
| Bus Pin ESD (HBM) | ±4 kV | — |
| IEC 61000-4-4 EFT Immunity | ±4 kV | — |
| Surge Immunity | [DATA_NEEDED: IEC 61000-4-5 surge rating] | — |
| Unit Load | 1/8 (up to 256 nodes on bus) | 1 UL (32 nodes on bus) |
| Common-Mode Range | Wide common-mode bus voltage range (per datasheet) | -7 V to +12 V |
| Termal Kapatma | Yes | — |
| Current Limiting | Yes | — |
| Low-Power Standby | Yes | — |
| İşletim Sıcaklığı | -40C to +125C | -40°C to +125°C |
| Paket | SOIC-16 wide-body (DW), 16 pins | 8-VSON EP (DRB) 3x3 mm |
| Montaj Türü | Surface Mount | Surface Mount, wettable flank |
| MSL Seviyesi | 3 (per JEDEC J-STD-020) | — |
| RoHS Durumu | Compliant | Compliant |
| Compliance Standards | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 | — |
| Product Type | — | RS-485/RS-422 Transceiver (half-duplex) |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage (VCC) | — | 3 V to 5.5 V |
| Maximum Data Rate | — | 50 Mbps |
| ESD Protection (Bus Pins) | — | ±18 kV IEC 61000-4-2 contact/air |
| EFT Immunity | — | ±4 kV IEC 61000-4-4 |
| Receiver Fail-Safe | — | Internal biasing (idle/short/open = logic high) |
| Moisture Sensitivity Level | — | MSL 1 |
| Duplex Mode | — | Half |