MPXV2053GP vs MPX2053GP Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MPXV2053GP sa pamamagitan ng NXP Semiconductors at MPX2053GP sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Pagsanggunian na paghahambing
| Parametro | MPXV2053GP | MPX2053GP |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Pressure Sensors | Pressure Sensors |
| Katayuan ng Lifecycle | Obsolete | Aktibo |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) |
| Maximum Overpressure | [DATA_NEEDED: max overpressure rating] | — |
| Type ng Output | Analog, Wheatstone bridge (mV differential) | Wheatstone Bridge (analog voltage, ratiometric) |
| Output Span | 0 mV to 40 mV (typ) at 10 V supply | — |
| Volte ng Pagbibigay | 10 V typical (ratiometric output) | 10 V typical (16 V maximum) |
| Port Style | Top-side, male tube 0.13" (3.17 mm) | — |
| Packhaging / Kaso | 8-SMD, Gull Wing, Side Port | — |
| Uri ng Pagpapasok | Surface Mount | Through-Hole |
| Temperature na Operasyon | [DATA_NEEDED: full operating temperature range, spec from datasheet 0C to +85C typical] | 0°C to +85°C |
| Temperature Compensation | On-chip, calibrated | On-chip, calibrated |
| Technology | Silicon piezoresistive (MEMS strain gauge) | Silicon piezoresistive (MEMS) |
| Linearity | [DATA_NEEDED: linearity %FS] | [DATA_NEEDED: linearity %FS] |
| Hysteresis | [DATA_NEEDED: hysteresis %FS] | — |
| Media Compatibility | Dry non-corrosive gases | — |
| Tindminan RoHS | [DATA_NEEDED: confirm RoHS status from datasheet] | Compliant |
| Sensitivity | — | 0.8 mV/kPa typical |
| Full-Scale Output | — | 0 mV to 40 mV (at 10 V supply) |
| Port Configuration | — | Single radial barbed port, 0.19" (4.93 mm) tube |
| Packhaging | — | 4-SIP Module (Unibody-4) |
| Termination Style | — | PC Pin (through-hole) |