MPXV2053GP vs MPX2053GP So sánh

So sánh chi tiết song song của MPXV2053GP bằng NXP Semiconductors và MPX2053GP bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

NXP Semiconductors
MPXV2053GP MPXV2053GP - 50kPa Pressure Sensor | NXP | mV Output

MPXV2053GP - 50kPa Pressure Sensor | NXP | mV Output

MPXV2053GP Obsolete
NXP Semiconductors
MPX2053GP MPX2053GP - 50kPa Gauge Pressure Sensor, 0.8mV/kPa | NXP

MPX2053GP - 50kPa Gauge Pressure Sensor, 0.8mV/kPa | NXP

MPX2053GP ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MPXV2053GP MPX2053GP
Thương hiệu NXP Semiconductors NXP Semiconductors
Danh mục Pressure Sensors Pressure Sensors
Trạng thái vòng đời Obsolete Hoạt động
Pressure Type Vented Gauge Vented Gauge
Operating Pressure Range 0 kPa to 50 kPa (0 PSI to 7.25 PSI) 0 kPa to 50 kPa (0 PSI to 7.25 PSI)
Maximum Overpressure [DATA_NEEDED: max overpressure rating] —
Kiểu đầu ra Analog, Wheatstone bridge (mV differential) Wheatstone Bridge (analog voltage, ratiometric)
Output Span 0 mV to 40 mV (typ) at 10 V supply —
Điện áp cung cấp 10 V typical (ratiometric output) 10 V typical (16 V maximum)
Port Style Top-side, male tube 0.13" (3.17 mm) —
Hộp / Vỏ 8-SMD, Gull Wing, Side Port —
Kiểu lắp đặt Surface Mount Through-Hole
Nhiệt độ hoạt động [DATA_NEEDED: full operating temperature range, spec from datasheet 0C to +85C typical] 0°C to +85°C
Temperature Compensation On-chip, calibrated On-chip, calibrated
Technology Silicon piezoresistive (MEMS strain gauge) Silicon piezoresistive (MEMS)
Linearity [DATA_NEEDED: linearity %FS] [DATA_NEEDED: linearity %FS]
Hysteresis [DATA_NEEDED: hysteresis %FS] —
Media Compatibility Dry non-corrosive gases —
Trạng thái RoHS [DATA_NEEDED: confirm RoHS status from datasheet] Compliant
Sensitivity — 0.8 mV/kPa typical
Full-Scale Output — 0 mV to 40 mV (at 10 V supply)
Port Configuration — Single radial barbed port, 0.19" (4.93 mm) tube
Hộp — 4-SIP Module (Unibody-4)
Termination Style — PC Pin (through-hole)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá