SP485E vs SP485EEN-L Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng SP485E sa pamamagitan ng MaxLinear at SP485EEN-L sa pamamagitan ng MaxLinear. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
MaxLinear
SP485E - Enhanced Low Power Half-Duplex RS-485/RS-422 Transceiver | MaxLinear
SP485E ✓ NakahandaPagsanggunian na paghahambing
| Parametro | SP485E | SP485EEN-L |
|---|---|---|
| Brand | MaxLinear | MaxLinear |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Fungsi | Transceiver | — |
| Protocol | RS-485, RS-422 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half-duplex | — |
| Rate ng Data | 2.5 Mbps (max, SP485E non-slew-limited) | 10,000 kbps |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Receiver Input Sensitivity | ±200 mV | — |
| Receiver Input Impedance | 12 kΩ minimum, 15 kΩ typical | — |
| Common-Mode Range | −7 V to +12 V | — |
| ESD Protection (HBM) | ±15 kV | — |
| ESD Protection (IEC 61000-4-2 Air Discharge) | ±15 kV | — |
| Hanay ng Temperature na Operasyon | [DATA_NEEDED: operating temperature] | -40 C to +85 C |
| Packhaging | 8-pin NSOIC or PDIP | 8-pin SOIC |
| Uri ng Pagpapasok | Surface Mount (NSOIC) or Through-Hole (PDIP) | Surface mount |
| Process Technology | BiCMOS | — |
| Failsafe Receiver | Yes (open, shorted, idle bus) | — |
| Tri-State Enable Pins | Yes (DE, RE) | — |
| Tindminan RoHS | Compliant | — |
| Product Type | — | Half-duplex RS-422/RS-485 transceiver |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| Alternate Family Data Rate | — | Up to 5 Mbps |
| Supply Voltage na Operasyon | — | 4.75 V to 5.25 V |
| ESD Tolerance, Human Body Model | — | Greater than 15 kV |
| ESD Tolerance, Air Discharge Method | — | Greater than 15 kV under IEC1000-4-2 |
| Supported Protocols | — | RS-422 and RS-485 |
| Duplex Mode | — | Half-duplex |
| Power Classification | — | Low-power interface IC |
| EMI Characteristics | — | Enhanced low-EMI design |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |