SP485E vs SP485EEN-L 비교
다음의 상세 나란히 비교: SP485E 제조: MaxLinear 및 SP485EEN-L 제조: MaxLinear. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | SP485E | SP485EEN-L |
|---|---|---|
| 브랜드 | MaxLinear | MaxLinear |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 기능 | Transceiver | — |
| Protocol | RS-485, RS-422 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half-duplex | — |
| 데이터 속도 | 2.5 Mbps (max, SP485E non-slew-limited) | 10,000 kbps |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Receiver Input Sensitivity | ±200 mV | — |
| Receiver Input Impedance | 12 kΩ minimum, 15 kΩ typical | — |
| Common-Mode Range | −7 V to +12 V | — |
| ESD Protection (HBM) | ±15 kV | — |
| ESD Protection (IEC 61000-4-2 Air Discharge) | ±15 kV | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature] | -40 C to +85 C |
| 패키지 | 8-pin NSOIC or PDIP | 8-pin SOIC |
| 실장 유형 | Surface Mount (NSOIC) or Through-Hole (PDIP) | Surface mount |
| Process Technology | BiCMOS | — |
| Failsafe Receiver | Yes (open, shorted, idle bus) | — |
| Tri-State Enable Pins | Yes (DE, RE) | — |
| RoHS 상태 | Compliant | — |
| Product Type | — | Half-duplex RS-422/RS-485 transceiver |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| Alternate Family Data Rate | — | Up to 5 Mbps |
| 동작 공급 전압 | — | 4.75 V to 5.25 V |
| ESD Tolerance, Human Body Model | — | Greater than 15 kV |
| ESD Tolerance, Air Discharge Method | — | Greater than 15 kV under IEC1000-4-2 |
| Supported Protocols | — | RS-422 and RS-485 |
| Duplex Mode | — | Half-duplex |
| Power Classification | — | Low-power interface IC |
| EMI Characteristics | — | Enhanced low-EMI design |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |