SP485E vs SP485EEN-L 比較
詳細並排比較 SP485E 由 MaxLinear 與 SP485EEN-L 由 MaxLinear. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
MaxLinear
SP485E - Enhanced Low Power Half-Duplex RS-485/RS-422 Transceiver | MaxLinear
SP485E ✓ 啟用中規格比較
| 參數 | SP485E | SP485EEN-L |
|---|---|---|
| 品牌 | MaxLinear | MaxLinear |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| 功能 | Transceiver | — |
| Protocol | RS-485, RS-422 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half-duplex | — |
| 資料速率 | 2.5 Mbps (max, SP485E non-slew-limited) | 10,000 kbps |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Receiver Input Sensitivity | ±200 mV | — |
| Receiver Input Impedance | 12 kΩ minimum, 15 kΩ typical | — |
| Common-Mode Range | −7 V to +12 V | — |
| ESD Protection (HBM) | ±15 kV | — |
| ESD Protection (IEC 61000-4-2 Air Discharge) | ±15 kV | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature] | -40 C to +85 C |
| 封裝 | 8-pin NSOIC or PDIP | 8-pin SOIC |
| 安裝類型 | Surface Mount (NSOIC) or Through-Hole (PDIP) | Surface mount |
| Process Technology | BiCMOS | — |
| Failsafe Receiver | Yes (open, shorted, idle bus) | — |
| Tri-State Enable Pins | Yes (DE, RE) | — |
| RoHS 狀態 | Compliant | — |
| Product Type | — | Half-duplex RS-422/RS-485 transceiver |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| Alternate Family Data Rate | — | Up to 5 Mbps |
| 工作電源電壓 | — | 4.75 V to 5.25 V |
| ESD Tolerance, Human Body Model | — | Greater than 15 kV |
| ESD Tolerance, Air Discharge Method | — | Greater than 15 kV under IEC1000-4-2 |
| Supported Protocols | — | RS-422 and RS-485 |
| Duplex Mode | — | Half-duplex |
| Power Classification | — | Low-power interface IC |
| EMI Characteristics | — | Enhanced low-EMI design |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |