SP485E vs SP485EEN-L Karşılaştırma

Ayrıntılı yan yana karşılaştırma SP485E tarafından MaxLinear ve SP485EEN-L tarafından MaxLinearAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Özellik Karşılaştırması

Parametre SP485E SP485EEN-L
Marka MaxLinear MaxLinear
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Fonksiyon Transceiver —
Protocol RS-485, RS-422 —
Number of Drivers/Receivers 1/1 —
Duplex Half-duplex —
Veri Hızı 2.5 Mbps (max, SP485E non-slew-limited) 10,000 kbps
Supply Voltage (VCC) 4.75 V to 5.25 V —
Receiver Input Sensitivity ±200 mV —
Receiver Input Impedance 12 kΩ minimum, 15 kΩ typical —
Common-Mode Range −7 V to +12 V —
ESD Protection (HBM) ±15 kV —
ESD Protection (IEC 61000-4-2 Air Discharge) ±15 kV —
İşletim Sıcaklığı Aralığı [DATA_NEEDED: operating temperature] -40 C to +85 C
Paket 8-pin NSOIC or PDIP 8-pin SOIC
Montaj Türü Surface Mount (NSOIC) or Through-Hole (PDIP) Surface mount
Process Technology BiCMOS —
Failsafe Receiver Yes (open, shorted, idle bus) —
Tri-State Enable Pins Yes (DE, RE) —
RoHS Durumu Compliant —
Product Type — Half-duplex RS-422/RS-485 transceiver
Transmitter and Receiver Count — 1 transmitter and 1 receiver
Alternate Family Data Rate — Up to 5 Mbps
İşletim Besleme Gerilimi — 4.75 V to 5.25 V
ESD Tolerance, Human Body Model — Greater than 15 kV
ESD Tolerance, Air Discharge Method — Greater than 15 kV under IEC1000-4-2
Supported Protocols — RS-422 and RS-485
Duplex Mode — Half-duplex
Power Classification — Low-power interface IC
EMI Characteristics — Enhanced low-EMI design
RoHS Compliance — [DATA_NEEDED: RoHS compliance]
REACH Compliance — [DATA_NEEDED: REACH compliance]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin